Construction Of Mission Shakti Bhawan Block Level, At Panchagaon Of Tigiria Block For The Year 2021-22 Construction Of Mission Shakti Bhawan Block Level, At Panchagaon Of Tigiria Block For The Year 2021-22
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
29 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tigiria → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Mission Shakti Bhawan Block Level, At Panchagaon Of Tigiria Block For The Year 2021-22 Construction Of Mission Shakti Bhawan Block Level, At Panchagaon Of Tigiria Block For The Year 2021-22
BOQ
| Sl. No. | Item Description |
| 1 | DismantalingGCI or AC Sheet roofing after carefully removing the bolts and nutsincluding stacking useful materials for reuse removing dabris from work site cost conveyance of all labour T & P etc. complete as per direction and specification of the Engineer-in-charge. |
| 2 | Dismantaling damage brick masonary wall in cement mortar under 3 m height including stacking useful materials for reuse removing dabris from work site cost conveyance of all labour T & P etc. complete as per direction and specification of the Engineer-in-charge. |
| 3 | Dismentaling RCC column beams slab stair case landing lintelsincluding stacking useful materials for re-use removing debrises from work site including cost conveyance of all labour T&P etc. complete.As per direction and specification of the Engineer-in-charge. |
| 4 | Dismentaling damage grading concrete from Chajja into required sizes including stacking useful materials for re-use removing debrises from work site including cost conveyance of all labour T&P etc. complete.As per direction and specification of the Engineer-in-charge. |
| 5 | Earth work in excavation of foundation trenches in all kinds of soil upto the required depth including moorum, stoney earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing, leveling the bed and depositing the excavated materials away from work site with initial leads and lifts, T&P shoring, shuttering and dewatering if required etc, complete as directed by the Engineer-in–charge. |
| 6 | Supplying and filling in foundation and plinth with sand well watered and rammed in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 7 | Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 8 | Cement concrete (1:2:4) in foundation and floors using 12mm(½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 9 | 25mm thick cement concrete (1:2:4) including punning and bitumen painting for bearing plaster using 12mm size hard broken granite chips including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 10 | R.C.C. work of M-20 gradehaving minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using12mm size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. A. FOOTING |
| 11 | B. COLUMN |
| 12 | C. PLINTH BEND |
| 13 | D. LINTEL |
| 14 | E. 65MM THICK CHAJJA |
| 15 | G. ROOF BEAM |
| 16 | H. STAIR CASE |
| 17 | I. ROOF SLAB |
| 18 | J. HEAD ROOM |
| 19 | Cutting, straightening coiled or bent up M.S. Rod or tor steel includingbending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 20 | Providing 20mm thick cement plaster in cement mortar (1:4)finished smooth to inside rough surface of brick or stone masonarywallswatering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.A. GROUND FLOOR |
| 21 | B. FIRST FLOOR |
| 22 | Fly ash Brick masonry using Fly ashBricks in FOUNDATION AND PLINTHhaving crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 23 | Fly ash Brick masonry using Fly ashBricks in SUPERSTRUCTURE having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.A. GROUND FLOOR |
| 24 | B. FIRST FLOOR |
| 25 | Fly ash Brick masonry using Fly ashBricks in SUPERSTRUCTURE having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.(Ground floor) |
| 26 | Back filling with excavated earth in layers not exceeding 150mm thick inlcuidng watering, ramming, cost conveyance of water and cost of all labor T&P required for the work etc complete as per the specification and direction of Engineer-in-charge (measurement will be taken on finished compcted section only) |
| 27 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlions, frames of doors windows ventilatora and bems including cost conveyance taxes of all materials T&P etc complete in all respect as per specification and direction of the Engineer-in-charge. |
| 28 | Supplying and fixing WI Clamps 25cm to 30cm ling of 35mmx5mm size for door and windows and ventilators including fixing in cement concrete (1:3:6) with 12mmto 20mm hard granite stone chips in cement morter (1:3)including cost conveyance taxes of all materials T&P etc complete in all respect as per specification and direction of the Engineer-in-charge. |
| 29 | Providing and fixing 32mm flush door shutters made out of 32mm thick BWR Block Board including the cost of hardware fittings like 125mm MS butt hinges, 250mm MS aldrop, 150mm MS handle, 150mm MS tower bolt, door stopper cost of labour, conveyance, taxes, loading, unloading, T&P etc. all complete as per the direction of Engineer in charge. |
| 30 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge.4x0.75X2.10= |
| 31 | Supplying providing and fixing of louvered glass ventilator in aluminium sectionChopped strand Mat (CSM), U.V. stabilized Isopthalic Gelcoat and impregnated with Isophthalic resin.The thickness of the GRP skin shall not be less than 2.0mm.The door frame consist of four segments, which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement.Six numbers of 260mm x 25mm x 5mm size ‘S’ shaped M.S. flat hold fast shall be provided with the frame.The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre’s Standards and specifications. |
| 32 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, crital frames for windows, balustrades of stair case and parapet railing made out of M.S Square bar/ flat as per approved drawing and design including making holes in walls and R.C.C structure, wood work etc., and making good to the damages to walls with cement concrete (1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) of approved quality with cost of all materials, labour, cost of welding, all T&P, sundries etc. complete in all respect as per specification & direction of the EI.C. (Screws & other hardware required materials to be used in the work shall be of approved quality & specification & shall have to be supplied by the contractor at his own cost.) |
| 33 | Providing, fitting & fixing of aluminium sliding window fully glazed shutter made out of aluminium frame of approved quality (INDAL / ZINDAL) made of Section No.151-154, 151-155 as window frame section No.151-155, 151-153 & 151-167 of ISI mark inserted with 5mm thick black glass of approved quality as panel fitted with rubber beading including locking arrangement with all hardware fittings, cost of all Labour, T&P, cost, conveyance and taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. |
| 34 | Supplying fitting and fixing vitrified tile(SOMANY, KAJARIA, jOHNSON) in floors and floor of size 600mmx600mm of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality inlcuidng cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge (for repair work only) |
| 35 | Supplying, fitting, fixing of Granite Tilesof approved quality over 25mm thickcement mortar(1:1) including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge Ground floor |
| 36 | Supplying fitting and fixing vitrified tile(SOMANY, KAJARIA, jOHNSON) in floors and dadooof size 600mmx600mm of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality inlcuidng cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge (for repair work only) |
| 37 | Supplying, fitting, fixing of Ceramic glazedtiles (20cmx20cm) in wallof 6.50mm to 6.70mm thickof approved quality over 12mm thickcement mortar(1:3) including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 38 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.A. GROUND FLOOR |
| 39 | B. FIRST FLOOR |
| 40 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smoothwatering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.A. GROUND FLOOR |
| 41 | B. FIRST FLOOR |
| 42 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth in ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. A. GROUND FLOOR |
| 43 | B. FIRST FLOOR |
| 44 | Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge. |
| 45 | Finishing walls with one coat of cement washingto give an even shape to the surface including cleaning the surface, sand papering and using paint of approved quality and approved shade including cost conveyance, taxes of all materials all labour & T&P etc. complete as directed by the Engineer-in-charge.A. GOUND FLOOR |
| 46 | B. FIRST FLOOR |
| 47 | Finishing the wall surface with Acrylic Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.(Ground floor ) |
| 48 | B. FIRST FLOOR |
| 49 | Finishing wall surface two coats of plastic emulsion paint over a coat of water bound primer to given an even shape of the surface including cleaning the surface with sand papering and using primer & paint of approved shade incluidng cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 50 | B. FIRST FLOOR |
| 51 | Finishing wall surface two coats of weather coat over a coat of water bound cement primer with cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 52 | B. FIRST FLOOR |
| 53 | Painting two coats with approved synthetic enamel paints to wood and iron work over a coat of primer including cost, conveyance, taxes, cost of all labour as per direction and specification of Engineer in charge |
| 54 | Providing and applying antitermite treatment by drilling holes of 12mm diameter at a distance of 300mm C/C junction of walls and floor about 300mm apart deep enough to reach the soil below and chemical emilsion (PREMISE, MIDACLOPRIED 30.5 SC of BAYER make mixed with 475 liter of water pumped these holes to soak the soil @ 1.00 ltr solution of each hole as per manufactures specification and the holes should be pluged with filling materials inlcuidng cost of all materials labour charges conveyance and all taxes inlcuidng hire charges of all machenaries etc as per direction of theengineer-in-charge |
| 55 | Supplying, fitting fixing of 110mm dia PVC rain water pipe with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 56 | Providing and laying of 80mm thick factory made cement concrete interlocking pavers block of M-35 grade and approved make varietycolour and size made by block making machine with strong vibratory approved design and shape laid colour patton over 50mm thick compacted bed of course and filling the joints with fine sand etc complete including cost conveyance royalty taxex of all materials labour referring CPWD analysisof rate page 1000 |
| 57 | Providing Tar Paper below Plinthbend with cost of all materials labour etc complete as per direction and specification of the engineer-in-charge |
| 58 | EI Work:-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Anchor/Havells/Finolex ) (Make of switch - Legrand /Roma) Group -A L.P -25 F.P-10 |
| 59 | Group-BL.P- 20 F.P-8 E.F.P-4 |
| 60 | Group-C L.P- 10C.B.P- 3 |
| 61 | Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FRLS PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with modular type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FRLS PVC insulated single core multistrand copper conductor forloop earthing etc. as required for Separate Board (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/HPL) |
| 62 | Supply and fixing of 5 Amp plug with switch on existing board (Modular Type ) (Make of switch - Legrand /Roma) |
| 63 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of 6pin 6Amp& 16Amp socket outlet and16Amp Modular switches connection(Make- Legrand /Roma) |
| 64 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLS PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/ V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 65 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 66 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 67 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 68 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existingsurface/recessed/STEEL /PVC conduit as required for Inverter wiring. 1 X 1.5sqmm |
| 69 | Supply and fixing of 15 Amp Top including all acessories and connection for Inverter ( Make : Cona/Anchor/Legrand/Havels) |
| 70 | S/F of 8\" x 10\" B.K coverwith all connection completein all respect. |
| 71 | S/F of 8\" x 10\" M.S Boardwith all connection completein all respect. |
| 72 | S/F of modular Computer Board consisting 3 nos 5amp and 1 nos 15amp switch and socket(Make -Legrand/Roma) |
| 73 | S/F of A.C point consisting of 32AmpSP MCB Stater with all connection completein all respect as per direction of Engineer in charge (Make -Legrand /L&T /Roma) |
| 74 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make- Legrand DMX3/L&T/C&S /Siemens) 8 way,Double door |
| 75 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Legrand DMX 3 /L&T/Siemens) Single pole (SP) |
| 76 | 40/63 Amp DP MCB |
| 77 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .(make-Cona/Anchor) |
| 78 | Supply and fixing of superior type Ding Dong call bell of ISI marked with bell push and all connection (make-Cona/Anchor/Crompton) |
| 79 | S/F of 48\" size A.C Ceiling fan with all accesories and connection (Make-Usha allure /crompton decora /crompton jura /polycab vital ) |
| 80 | S/F of step type ModularFan Regulator with all connection completein all respect as per direction of Engineer in charge(Make-Roma/Legrand) |
| 81 | Supply & Fixing of 12 inchHeavy duty Exahust Fan with wall cutting,plastring, painting with all connection complete in all respect as per direction of Engineer in charge(Make- Havells/Almonard / Usha) |
| 82 | Supply and fixing of 18watt LED TUBE LIGHTwith very high efficiency suited for installation in existing G5 lamp holders to glare give free light . (Make:Philips/Havells/Crompton) |
| 83 | Supply and fixing ofRecessed fitting 15/18watt recess mounted pressure dieCast almunimium luminaire in powder coated white finish in squreprofile with optimized heat sink for efficeint heat disspation and separate replaceable electronic driver 18W LED 3000K(Philips/Havells/Crompton) |
| 84 | S/F. of34Wt. LED Surface/Recess mounting down lights of( Havels-PLUTO PANEL/crompton ) .(Portico lights,Corridor roof ) |
| 85 | S/F of 90wattLEDStreet Light New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic drive including G.I bracket ,M.S clamp ,Anchor fastner withall acccessories and connection.(Make:Philips/Havells/Crompton) |
| 86 | Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 87 | Providing and fixing 6 SWG G.I. wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required. |
| 88 | Supply , installation , testing and commissioning 125Amp. INDOORpannel boardwith danger board .16/18 SWG pannel box L24\" X36\"BX 5= 4320 sq. inch for single doormade out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint |
| 89 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L24\" X36\" B including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc. |
| 90 | S/F of bus bar 35 x 5 mm with required size of insulating material and nut and bolts |
| 91 | S/F of bus bar 25 x 5mm with required size of insulating material and nut and bolts |
| 92 | Supply and fixing offollowing size of 4pole MCCB in cubiclepanel board for incoming and out going (Legrand/HPL/Havells/Anchor/L&T) 125 Amp 4-pole 36 KA MCCB (as Incomer) |
| 93 | 40Amp DP MCB |
| 94 | Supply and fixing of Ammeter(0A-500A)with selector switch including all connections |
| 95 | Supply and fixing of voltmeter(0V-500V)with selector switchincluding all connections |
| 96 | Supply and fixing of Indicator lamp with toggler switch and fuse |
| 97 | Installation, testing and commissioning of above MCCB pannel boardwith danger board |
| 98 | PH Work:-Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.In ground floor20 mm CPVC pipes |
| 99 | 25 mm CPVCpipes |
| 100 | 32 mm CPVCpipes |
| 101 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C.250 mm thick wall in GF |
| 102 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.In ground floor |
| 103 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia long body Bib Cock (Jaquar)-CON-CHR-035 |
| 104 | 15mm dia. C.P angle stop cock (Jaquar)-CON-CHR-051 |
| 105 | 15mm dia CP Health faucet.ALD-IVY-585(Jaquar) |
| 106 | 15mm dia Two way Bib Cock (Jaquar)-CON-CHR-041KN |
| 107 | 25mm dia brass or gun metal full way valve(shakti make) |
| 108 | 32mm dia brass or gun metal full way valve(shakti make) |
| 109 | 15mm dia CP Flange |
| 110 | 15mm dia CP Extention Nipple |
| 111 | 125mm CP grating |
| 112 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class Fly ash.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 2000 litre capacity water storage tanks on roof of GF |
| 113 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) |
| 114 | 110mm U-PVCdoor Tee |
| 115 | 110mm U-PVC offset |
| 116 | 110mm U-PVCdoor bend |
| 117 | 110mm U-PVCPlainbend |
| 118 | 110mm U-PVCplain shoe bend |
| 119 | 110mm U-PVC cowl |
| 120 | 110mm P-trap |
| 121 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge.250mm to 375mm thick wall |
| 122 | Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak) |
| 123 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge.580mm size Orissa pan(Parryware/Hindware/Neycer/Rak) |
| 124 | Supplying all materials,labour,T&P and fixing the following vitreous china wash down water closet(European type W.C.pan) with integral \"P\" or \"S\" trap to the fllor with wooden plugs and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar(1:1)fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc.all complete as per specification and direction of the Engineer-in-charge.EWC with S trap |
| 125 | Supplying all materials,labour, T&P and fixing laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge.600mmx450mmx250mm size Stainless steel Sink(Jayana) |
| 126 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge550mmx400mm W.H.basin with porcelain pedestal |
| 127 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.600mmx450mm size B.E.mirror |
| 128 | Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification anddirection of the Engineer in charge600mmx125mm glass shelf with CP/NP guard rails(Jaquar make)CAN-SSF-1171N |
| 129 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail (Jaquar make)AKP-CHR-35711P |
| 130 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder (Jaquar make)AKP-CHR-35731P |
| 131 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge.Shutter - |
| 132 | Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge. |
| 133 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site.In ground floor - |
| 134 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.In ground floor - |
| 135 | Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 30x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC).In ground floor - |
| 136 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4)on brickwork inclding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor - |
| 137 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 45x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC).In ground floor |
| 138 | Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly ash. brickwork in CM ( 1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing , specification and direction of Engineer in charge 250mmx250mm with RCC cover |
| 139 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly ash. brickwork in CM ( 1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in ( 1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxesetc. all complete as per aproved drawing , specification and direction of Engineer in charge Inside size 760mm x760mm x460mm |
| 140 | Sinking of125x100 mm dia Tube wellLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.Drilling of 125 mm dia bore 00 mtr to 30mtr |
| 141 | 30 mtr to 45 mtr |
| 142 | 46mtr to 120 mtr |
| 143 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes 00 mtr to 30 mtrs |
| 144 | 30 mtr to 60mtr |
| 145 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.125 mm dia PVC (sch-80) pipe |
| 146 | Supplying all materials and labour T&P and providing sanitary sealing by cement concrete grouting of annual space around GI/PVC/MS housing pipe upto5 mtrs below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the E.I.C. . Minimum one meter of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing ( excluding cost of cement which will be supplied by the department. Sanitary sealing upto 5 meters below ground level |
| 147 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH Rig |
| 148 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1H.P single phase 3 stage head range 50 to 90 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm. |
| 149 | DOL control panel |
| 150 | 2.50sqmm cable |
| 151 | 32mm dia steel short piece |
| 152 | Steel rope with cover |
| 153 | Well cap |
| 154 | 50mm size CI bracket |
| 155 | 32mm dia HDPE pipes |
| 156 | Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site. |
| 157 | Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 158 | Supplying all materials, labour, T&P and constructing man hole chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeMan hole chamber Inside size 910mmx910mmx910mm |
| 159 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge RCC rings soakway pit 1.22m dia x 2.10m deep |
| 160 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete |
| 161 | 160mm dia u-pvc pipe alround concrete |
| 162 | Constructionone no 30 users Septic Tank(1no)Supplying all labour , T&P and earth work in excavation of foundation in all kinds of soil within 50minitiallead and 1.5m initial liftincludingroughdressing&breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-chargeWithin initial lead of 50m and initial lift of 1.5m |
| 163 | Extra lift of 1.50m or part thereof over the initial lift of 1.50m |
| 164 | Supplying all materials,labour, T&P and providing Ist class Fly ash.Brick work in C.M (1:4) in foundation and plinth including watering, curring, conveyance of all materials to site. |
| 165 | Supplying all materials, labour, T&P andproviding cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 166 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 167 | Supplying all materials, labour, T&P and providing 12 mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 168 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge. |
| 169 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 170 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 171 | Supplying all materials, labour, T&P and making MS step Iron in 20mm diameter MS steel bars and fixing into walls of manhole / septic tank duly embedded in cement concrete (1:3:6)with 12mm size crusher broken hard black granite chipsincluding watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc complete as per specification and direction of the Engineer-in-charge |
| 172 | Supplying all materials,labour,T&P and providing vent base in cement concrete(1:2:4) using 12mm size HG chips all complete including watering,curing,conveyance of all materials to worksite,payment of royalty texes etc. all complete as per specification and direction of the Engineer-in-charge. |
| 173 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 174 | Supplying all labour, T&P and filling in foundation and plinth with excavated earthincluding watering and ramming etc. complete as directed by the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Nov 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender