Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-12-2021 | Corrigendum No 01 | Date | 20-12-2021 |
| Sl. No. | Item Description |
| 1 | SITE CLEARANCE |
| 2 | Cutting of trees, including cutting oftrunks, branches andremovalofstumps,roots,stackingofservicable materialwith allliftsand upto a lead of 1000mts and earth filling in the depression / pit and as per relevant clausesofsection2000ForGirthfrom300mmto 600mm |
| 3 | Cutting of trees, including cutting oftrunks, branches andremovalofstumps,roots,stackingofservicable materialwith allliftsand upto a lead of 1000mts and earth filling in the depression / pit and as per relevant clausesofsection2000Girth beyond 600 mm to 900 mm |
| 4 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable materialBeyond 30 cm girth upto and including 60 cm girth |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1 m above ground level and removal of rubbish upto a distance of 50 meter outside the periphery of the area cleared. |
| 6 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.All kinds of soil. |
| 7 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge.1:3:6 or richer mix |
| 8 | Dismantling of barbed wire fencing/ wire mesh fencing including posts, (any type) foundation concrete, back filling of pit by manual means including disposal of dismantled material with all lifts and up to a lead of 1000 meter, stacking serviceable material and unserviceable material separately. |
| 9 | Removal of telephone pole/ Electric Poles/ traffic poles/ sign Boards etc. including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 meter and stacking the serviceable and unserviceable material separately. |
| 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles above 25 mm and up to 40 mm |
| 11 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 12 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead.Of area beyond 3 sq. meters |
| 13 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-ChargeIn cement mortar |
| 14 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of:Asbestos sheet |
| 15 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts,nuts,cutting rivets,welding etc. including dismembering and stacking within 50meters lead. |
| 16 | CIVIL WORKS |
| 17 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead up to 50m. Disposed earth to be levelled and neatly dressed.All kinds of soil |
| 18 | Earth work in excavation for Foundation, Trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead up to 50m. Disposed earth to be levelled and neatly dressed.Ordinary rock |
| 19 | Transportation By Mechanical means including loading, unloading and stacking where ever necessaryExcavated Earth5km or Part thereof |
| 20 | Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 21 | Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete.Moorum/Hard copra |
| 22 | Supplying and filling in plinthunder floors including, watering, ramming consolidating and dressing complete.Crusher Stone Dust |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.Cement concrete grade M-15 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 25 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 26 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 27 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor two level excluding the cost of centering, shuttering and reinforcement with Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 28 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 75 Kg/CM2 (average compressive strength) up to plinth level :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 29 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 75 Kg/CM2 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 30 | Half Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 75 Kg/CM2 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 31 | Extra for providing and placing in position 2 Nos. 8mm dia. M.S. / HYSD bars at everythird course of half brick masonry. |
| 32 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) |
| 33 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 34 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement: 4 fine sand). |
| 35 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 sand) |
| 36 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 37 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. Thermo-Mechanically Treated bars. (Fe 500 D or more) |
| 38 | Centeringandshutteringincludingstrutting,propping etc.and removal of form for :Foundations,footings,basesofcolumns, etc.For mass concrete. |
| 39 | Centeringandshutteringincludingstrutting,propping etc.and removal of form for : Columns, pillars, piers, Abutments, Poets, Struts. |
| 40 | Centeringandshutteringincludingstrutting,propping etc.and removal of form for : Suspended floors, roofs, landings, etc. |
| 41 | Centering and shuttering including strutting, propping etc.and removal of form for :Lintels, Beams, Plinth Beams, Girders, Bressumers and Cantilevers. |
| 42 | Centeringandshutteringincludingstrutting,propping etc.and removal of form for : Walls (any thickness) including attached pelasters, plinth, etc. |
| 43 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 44 | Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete. |
| 45 | Applying one coat of cement primer of approved brand and manufacture on wall surface: cement primer. |
| 46 | Wallpainting withplastic emulsion paintofapproved brand and manufacture to give an even shade: including labour rate. |
| 47 | Painting Steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @.90 L/10 sqm over an under coat of primer applied @.80L/sq of approved brand or manufacture. |
| 48 | Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. |
| 49 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 50 | Providing and laying Vitrified Floor Tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness as per manufacturer specification). |
| 51 | Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.Area of slab over 0.50 sqm. |
| 52 | Red Sandstone - Exoppsed Face machine cut and table rubbed with rough backing. 30mm thick. |
| 53 | Providing and laying Antiskid endura floor tiles (300mmx300mm), 12 mm thickness with water absorption\"s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand ) including grouting the joints with white cement with matching pigments etc. Complete. |
| 54 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cement mortar 1:4 (1Cement : 4 Sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.BlackArea of slab more than 0.50 sqm |
| 55 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge. |
| 56 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge. |
| 57 | Providing andfixingstoneslabtablerubbed,edgesroundedand polished of size 75x50 cm deep and 1.8 cmthickfixedinurinal partitions by cutting a chase of appropriate width with chase cutter and embedding thestonein thechasewithepoxygroutor with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth.Granite Stone of approved shade. |
| 58 | Kota stone 25mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 cement mortar (1 Cement : 4 Course Sand) (minimum size of Kota Stone 2.0 sqft) |
| 59 | Extra for providing opening of required size & shape for Wash Basins/ Kitchen Sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 60 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete and as per clause 408 of specifications |
| 61 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer.M.S. tube. |
| 62 | Providing and fixing Stainless Steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 63 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 64 | Making plinth protection 50mm thick ofCement concrete grade M- 10 (Nominal Mix with 20 mm maximum size of stoneaggregate) over 75mm bed by dry brick ballast 40mm nominal sizewellrammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 65 | Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 66 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound (Dr. Fixit or Equivallent) consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. |
| 67 | Providing precast cement concrete Jali of cement concrete grade M15 (Nominal Mix) with 6 mm maximum size of stone aggregate reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 40MM THICK |
| 68 | Providing and fixing square-mouth S.W. gully trap grade \"A\"? complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With Modular Bricks class designation 40.180 x 150 mm size P type. |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes. |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.25 mm nominal outer dia .Pipes. |
| 71 | Providing laying and jointing following P.V.C. pipes with solvent cement joint for 6,8 and 10 kg/sqcm pressures including testing of joints, cost of jointing material etc. complete in all respect. ( Conform to IS 4985:2000 and IS 7634 (PT-3)110 mm dia (6 Kg/cm2) |
| 72 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore. |
| 73 | Providing & laying of P.V.C. pipe for roof top harvesting from roof slab to Ground floor including all fittings, jointing material with bypass arrangement with suitable valves.P.V.C. pipe 6kg/sqm (110 mm) |
| 74 | Supplyingandfixingrollingshuttersof approvedmake,made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on 2049specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top coverof required thickness for rolling shutters.80x1.25mm M.S. laths with 1.25 mm thick top cover. |
| 75 | Providing and fixing ball bearing for rolling shutters. |
| 76 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 77 | Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company.28 to 30 mm thick plain solid PVC flushdoor shutter |
| 78 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S.S. screws having minimum density of 750 kg/m3 and screw withdrawal strength of 2200 N (Face) & 900 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately)Single or double rebate (125 mm X 65 |
| 79 | Providingand fixing aluminiumwork for doors, windows, ventilatorsandpartitionswithextrudedbuiltupstandardtubular sections/ appropriate Z sections andothersections of approvedmakeconformingtoIS:733andIS:1285,fixedwith rawlplugsandscrewsor with fixing clips, or with expansion holdfastenersincluding necessary filling up of gaps at junctions, attop,bottomandsideswithrequiredPVC/neoprene feltetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminiumsnapbeadingforglazing/paneling,C.P.brass/ stainless steel screws, all complete as per architectural drawings andthedirectionsofEngineer-in-charge. (Glazingand paneling to be paid for separately) :For fixed portion Powdercoated aluminium(minimumthicknessof powder coating 50 micron) |
| 80 | Providing and fixing M.S. Tubular frames for doors, windows,ventilators andcupboard withL-Type section made of 1.60mmthick M.S.Sheet,jointsmitredandweldedandgrinded finishprofiles requiredsizewith 15x3mmlugs 10cmlong embedded in cementconcreteM-10(NominalMixwith20mm maximumsizeofstoneaggregate) blocks15x10x10cmorwith wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required includingfixing of necessary butt hingesandscrewsandapplyingaprimingcoatofapprovedsteel primers. |
| 81 | Providingand fixingglazingin aluminiumdoor,window, ventilatorshuttersandpartitionsetc.withPVC/neoprenegasket etc. complete as per the architecturaldrawingsand the directions ofengineer-in-charge(Costofaluminiumsnapbeadingshallbe paid in basic item):With float glass panes of 8 mm thickness |
| 82 | Providing and fixing bright finished brass door latch with necessary screws etc. complete :250x16x5 mm |
| 83 | Providingand fixing bright finishedbrass handles with screwsetc. complete :75mm |
| 84 | Providingand fixing bright finishedbrass handleswith screwsetc complete125MM |
| 85 | Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : 200x10 mm |
| 86 | Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 87 | Providingandfixingbrightfinishedbrasshangingtypefloordoor stopper with necessary screws, etc. complete |
| 88 | Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete.110 mm diameter OD |
| 89 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:110 mm diameter PVC. Pipe |
| 90 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.75mm |
| 91 | Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.75mm diameter |
| 92 | Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design :100 mm Dia SW Pipe |
| 93 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee with door75x75x75 mm |
| 94 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee without door75x75x75 mm |
| 95 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5°75 mm bend |
| 96 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete,including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outletSand Cast Iron S&S as per IS- 1729. |
| 97 | Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete.160 mm diameter OD |
| 98 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:160 mm diameter PVC. pipe |
| 99 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm Nominal Bore |
| 100 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm Nominal Bore |
| 101 | Providing and fixing C.P. Brass shower rose with 15 or 20mm inlet100 mm diameter |
| 102 | Providing and fixingCP brass Urinal spreader of approved quality and make |
| 103 | Oval shape wash basin over counter/under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly) |
| 104 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 105 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 106 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 107 | Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete M-15 with aggregate of 20 mm nominal size over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. |
| 108 | Providing and fixing G.I. chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- incharge. (Cost of post, painting, earthwork and CC to be paid separately)Made of G.I. wire. |
| 109 | Providing and fixing in position best indian single Lever AutoMixing Divertor(Cartradge Size 47mm,nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. |
| 110 | Providing and fixing gun metal gate valve with C.I. wheelof approved quality (screwed end):20 mm nominal bore |
| 111 | Bottletrap38mmsinglepiecemouldedwithheightof 270mm, effectivelengthoftailpipe260mmfromthecentreofthewaste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. |
| 112 | ProvidingandfixinguplasticisedPVCconnectionpipe with brass unions30 cm length15 mm nominal bore |
| 113 | ProvidingandfixingC.P.brassgratingofapprovedqualityandmake conforming to IS: specification.23.38.1 100 mm dia. |
| 114 | Making soak pit 2.5 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 40 and S.W. drain pip 100 mm diameter, 1.8 m long complete. Over the fillingshall be placed singlemattingwhich shall be covered with minimum layer of 7.5 cm earth. The shaft be covered with 7.5 cm thickstoneorR.C.C.slab10cmwideand10cmdeepbrick edging with bricks of class designation 40 shall be provided round the pit. The connection of the open surface drain to the soak pit shall be made by means of 100 mm diameter S.W. pipe with open joints, as per standard design. (Fig 2.25) |
| 115 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) |
| 116 | Sanitary Pad Vending Machine & incinarato |
| 117 | Toilet Feed back Machine |
| 118 | Solar water heating system with heat exchanger with min 100 Lit Capacity Conforming to IS 12976-1990 or Latest |
| 119 | Hand Dryer Conformity to IS: 302-2-30: 2007 latest |
| 120 | Dust Bin (Large) |
| 121 | Dust Bin (Small) |
| 122 | ELECTRICAL WORK |
| 123 | Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- a) Short point |
| 124 | Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- b) Medium point |
| 125 | Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :-c) Long point |
| 126 | Point wiring including metallic switch box, sheet, switches, sockets for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board . |
| 127 | WiringforcircuitwiringwithPVCinsulatedcableFRwithcoppermulti strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISImarkedsuitablesizeincludingpaintingetc.asrequiredasper specification 1.3.6 (a) 2x2.5 Sq.mm. |
| 128 | POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY)SYSTEM WITH FLUSH TYPE ACCESSORIES SOR 1.5.1 Pointwiringincludingmetallicswitchbox,sheet,for3Pin16Amp. SocketOutletPointWith4Sq.mm.PVCinsulatedcableFRwith copper multi strand conductor ISI marked in Surface rigid P.V.C.Conduit (HMS) ISI Marked of suitable size including painting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm.PVCinsulatedcopperearthcontinuityconductorofgreencolour inside conduit as per specification for :- (C)Long Point |
| 129 | MODULAR SWITCH BOXES SOR 2.9.3 Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:- 6 Module |
| 130 | MODULAR SWITCH BOXESSupplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:- 12 Module |
| 131 | CIRCUIT WIRING IN EXISTING CONDUIT / PVC CASING CAPPING 1.5 Sq mm cable3 X 1.5 sq mm |
| 132 | Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker(MCB)of\"C\"seriessuitable for 240/415Volts,50Cycle, 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- 8.5.1SINGLE POLE (SP) 8.5.1.2 6 Amp to 32 Amp Rating |
| 133 | Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker(MCB)of\"C\"seriessuitable for 240/415Volts,50Cycle, 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- 8.5.3 DOUBLE POLE (DP)8.5.3.3 For 40 Amps. Rating only. |
| 134 | SupplyingofMCBIsolatorssuitablefor240/415Volts,50HzAC supply with KA value rating 10 kA of approved make confirming to IS :13947-Part III : 1993 & IEC :60947- 3:2001 (without enclosures) :- |
| 135 | Supplyofapprovedmakepowdercoatedsheetsteel encloser SPN MCB DB inclusiveof Busbar,Neutral bar, Earthbar&twoearthterminalsetc.completeasper IS:13032( exclusive of MCB & isolator)-8 way double door |
| 136 | Suppling and fixing of approved make step type Modular electronic, Fan regulator single/double module including connection etc. as required on existing board (1000 watt) |
| 137 | Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard downrod,canopy,hangingshackle,Aluminiumblades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS :374/1979 with upto date ammendments.Ceiling Fan (Energy Saver 60 W)-1400 mm Sweep |
| 138 | Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250completeconnectionandincluding,framebolt/ Anchor hole fastners etc. complete finished and as required.450mm sweep 900 RPM |
| 139 | Supplying and fixing of LT Panel accessories of approved makeinexistingLTPanelincludingconnectionsetc.as required as per specificationLED Lamps |
| 140 | Supplying,fixingandtestingofapprovedmake fluorescentsingle&doubletubefitting36/40watt,rust resistant, stove enamelled paint, CRCA sheet steel housingwithopalacrylicdiffuseranddecorativeend platescompletewithcopperballastcompleteduly wired (without tube rod) as per specification & fixing .1 x 40/36 watt |
| 141 | SupplyofXLPEInsulatedpowercable(conformingIS- 7098 ) 1100 Volt grade/Heavy duty powercable conformingtoIS1554-1100Voltsgrade,2core/3½ core/4 coreISI MARKED with Alu. Stranded /solid conductorARMOURED 3 Core10 Sq.mm.(XLPE) |
| 142 | PUBLIC PARK / PUBLIC TOILET SAGAR SMART CITY LTD. SSCL LOGO & GENTS , LADIES & HANDICAP LOGO at various site of\"Construction of Public and Community Toilets in Sagar City\"•The thickness of the acrylic should be Minimum 5MM. •Samsung / Bajaj or equivalentModules should be installed inside the board along with rainproof drivers and Controllers. •The ACP sheet used in the Fixture should be branded. •The design of the Acrylic should be cut on a Computer numerically controlledrouter machine for finest quality and finish• Fixing arrangement of the Letters shall be such that even during stormy weather conditions, the fixtures shall not get |
| 143 | Horticulture & Plantation Work |
| 144 | Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 145 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 146 | Loading and unloading of stone boulder / stone aggregates / sand / kanker / moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip) For a lead upto 5 Km. |
| 147 | Rough dressing the trenched ground including breaking clods. |
| 148 | Fine dressing the ground |
| 149 | Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately). |
| 150 | Supplyingandstackingatsitedumpmanurefrom approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20mm |
| 151 | Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). |
| 152 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge |
| 153 | Grassingwith„Doob?grassincludingwateringand maintenanceofthelawnfor30daysormoretillthe grassformsathicklawnfreefromweedsandfitfor mowing including supplying good earth if needed (the good earth shall be paid for separately).In rows 5 cm apart in either direction. |
| 154 | Edging With Brick laid dry lenght wise , including requried excavation ,refilling , consolidrating with hend d packing and sprading surplus earth neatly with lied up to 50 m Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 155 | Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot. |
| 156 | Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot |
| 157 | Providing Plant Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, |
| 158 | Providing of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot. |
| 159 | Providing of Dracaena mahatma plant, having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot / Plastic pot |
| 160 | Acalypha red well developed with fresh & healthy 30 to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic Pot |
| 161 | Acalypha green well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic |
| 162 | Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm |
| 163 | Providing Plant Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot. |
| 164 | Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm |
| 165 | Foxtail palm of plants ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags |
| 166 | Providing and displaying of Areca palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 167 | Cyprus Golden 30 to 45 cm ht. plant well developed good Golden colourfoliage, Conial Shape in 25 cm Earthen Pots |
| 168 | Allamanda cathartica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots |
| 169 | Supply and stacking of plant Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm |
| 170 | Supply and stacking of plant Tabernaemontana coronaria (Chandni single) of height 45-60 cm. in earthen pots of size 20 cm |
| 171 | Azadirachta indica ( Neem ) of plants height 120-130cm in big polybag of plants size 25 cm |
| 172 | Nauclea cadamba (Kadam) of plants height 150-165 cm. in big poly bag of plants size 25 cm |
| 173 | Delonix regia (Gulmohar) of plants height 150-165 cm. in big poly bags of plants size 25 cm |
| 174 | Phyllanthus emblica (Amla) of plants height 150-165 cm. in Big HDPE Bag |
| 175 | Ficus bengalensis (Bargad) of plants height 120-135 cm. in big poly bags of plants size 25 cm |
| 176 | Plumeria alba of plants height 120-135 cm. with 2-3 branches in bags of plants size 30 cm |
| 177 | Tectona grandis (Teak) of plants height 150-165 cm. in big polybags of plants size 25 cm |
| 178 | Bauhinia purpurea (Kachnar) of plants height 150-165 cm. in big poly bags of plants size 25 cm |
| 179 | Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots. |
| 180 | Dalbergia sissoo (Seasam) of plants height 120-135 cm. in big poly bags of plants size 25 cm |
| 181 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge |
| 182 | Supply and stacking of plant Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm |
| 183 | Supply and stacking of plant Murraya exotica of height 45-60 cm. in poly bags of size 15 cm |
| 184 | Chlorophytum-variegated plant, full of leafy suckers in 15 cm size of Earthen Pot / Plastic Pot. |
| 185 | Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot. |
| 186 | Preparationofbedsforhedgingandshrubberyby excavating60cmdeepandtrenchingtheexcavated base to a further depth of 30cm, refilling the excavated earthafterbreakingclodsandmixingwithsludgeor manure in the ratio of 8:1(8 parts of stacked volume of earthafterreductionby20%:onepartofstacked volumeofsludgeormanureafterreductionby8%), floodingwithwater,fillingwithearthifnecessary, watering and finally fine dressing, leveling etc. including stacking anddisposalofmaterialsdeclared unserviceableandsurplusearthbyspreadingand leveling as directed, within a lead of 50m lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). |
| 187 | Diggingholesinordinarysoilandrefillingthesamewith the excavated earth mixed with manure or sludge intheratioof2:1byvolume(2partsofstacked volumeofearthafterreductionby20%:1partof stackedvolumeofmanureafterreductionby8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 1.2 m dia and 1.2 m deep. |
| 188 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep. |
| 189 | LIGHTING |
| 190 | Porviding,erecting,testingandcommissioningsolar streetlightsystemon80mmheavydutygalvanised iron pipe 6 meter hight with 30cm x 30cm x 2mm base plateinstalledowncementconcretepadestalcasing completewithsolarpanel,solarbatterywith charger,otheraccessorieswithcontrolpanelin weatherproofpolebox,solarfittingLEDtypeorCFL type 18 watt to 20 watt (set of 2 nos.) |
| 191 | Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 50.00mm outside dia. |
| 192 | Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 63.00mm outside dia. |
| 193 | Supply of XLPE Insulated power cable (confirming IS- 7098) 1100 Volt grade/Heavy duty power cable confirming to IS 1554-1100 Volts grade, 2 core /3 1/2 core/4 core ISI MARKED with Alu. Stranded/solid conductor (Make: Havells /Polycab/Finolex)ARMOURED 4 CORE 10sq.mm(XLPE) |
| 194 | Laying of one number PILC/PVC insulated and PVC sheathed power cable of grade exceeding 1.1kV but not exceeding 11kV of size not exceeding 120 Sq.mm direct in ground including excavation sand cushioning, protective covering and refilling the trench etc. as required. |
| 195 | Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor 6 Sq.mm.(XLPE) |
| 196 | Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor 10 Sq.mm.(XLPE) |
| 197 | Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of \"C\" series suitable for 240/415 Volts, 50 Cycle, 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 : 2002 but without enclosures.TRIPLE POLE - 63 Amps |
| 198 | Supplying, fixing, testing & Commissioning wall/ floor mounted LT Panel primer coated with two coat of enamel paint & provided with required gasket for dust/vermin proof with degree of protection IP42 suitable for 415V 3 phase, 50 Hz, 4 wire system fabricated out ofCRCA sheet upto 2 mm thick (1.6 mm for doors) with frame work of angle iron/ channel/ bolted type construction duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, Frequency Meter, phase indicating lamps, energy meter complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supply MCBs, MCCBs, panel mounted Changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere Meter, Volt Meter, Selector switch as per approved design & specification. |
| 199 | Supplying of ISI Marked Switch Fuse Unit (rewirable type)triple pole with neutral link, 415 Volt having conduit/ cable gland entry with two earthing terminals confirming to IS: 14947 - 100 Amps. /Timer |
| 200 | Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF > 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.30Watt, color temp 3000-6500k as required |
| 201 | Supply, fixing & testing of approved make of LED integral type bollard cylindrical/square shape housing cast aluminium dome shape top cover fixed with cylindrical shape acrylic cover having base plate with holes for direct mounting complete with all accessories includingpreparation of foundation, fixing, connection etc. as required. LED of 1 to 3 Watt each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminaire having color temp upto 6500K & 50000 burning hrs. life with minimum @ L 70, The colour renderingindex of LED light should be more than 70.Luminiare, comprises of driver PF> 0.95 &surge protection 10KV. IP65 protection.Submission LM 79-08/IS16106 (2012),IEC60598, IEC61347i/c connection wire, testingetc. to complete the job.Bollard LED 8-10 Watt cylindrical shape height > 700mm, color temp 3000-6000k |
| 202 | Supply and fixing integral post top lantern LED fitting comprises of copper dust finish castaluminium spigot and spun aluminium canopy fixed with opal polycarbonate, pipe arrangementfor vertical mounting, open construction driver and accessories are wired upto terminal block.LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K &having 50000 burning hrs. life with minimum @ L 70, system lumen output should beminimum with efficacy>100lm/Watt. LED driver PF > 0.95 & surge protection 10KV. Thecolour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106(2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.40 Watt LED, color temp 3000-6500k as required. |
| 203 | Supply, Installation testing and commissioning of red colour aviation light LED integral typecomprising of aluminium powder coated housing with polycarbonate enclosure IP 65 on existingpipe/support including connection, testing etc. as required. Guarantee as per tender agreementcondition.20 watt (300 LED) |
| 204 | Water Supply Work |
| 205 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. PE-100 , 25mm dia, 6kg/sqm |
| 206 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine.PE-100 , 20mm dia, 6kg/sqm |
| 207 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine.PE-100 , 63mm dia, 6kg/sqm |
| 208 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc 20 mm dia. nominal bore |
| 209 | Providingandfixinggunmetal/brasscheck(non- return) valves Class-II, confirming to IS-778/1984 (Reaffirmed2005) ends, tested to 21.09 female kg/sq.cm.25 mm diameter including labour rate |
| 210 | Providing and laying Equal Tee confirming to IS specifications. 25mm dia, 6kg/sqm |
| 211 | Providing and laying Equal Tee confirming to IS specifications. 20mm dia, 6kg/sqm |
| 212 | Providing and laying Bend 90 Degree confirming to IS specifications. 20mm dia, 6kg/sqm |
| 213 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings. |
| 214 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 200mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 200mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 215 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988. Screen pipes with ribs 150mm dia |
| 216 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988. Screen pipes with ribs 200mm dia |
| 217 | Supplying &installation of required capacity of single phase, 50 Hz, 220V, deep well submersible pump stainless steel body, as per IS of approved make, suitable for 4\"/6 \" tube well with control panel starter suitable for submersible pump with dry run protection, connections, including clamp, bore cap etc. as required as per specifications but excluding pipe, SS/Nylon wire rope and connection cable.1.5 HP with 7-8 stages, head metre 56-21, discharge LPM 40-125 |
| 218 | Drainage Work |
| 219 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. PE-100 , 200mm dia, 6kg/sqm |
| 220 | Providing, laying, Jointing following PVC U pipes with solvent cement joint for non-pressure gravity drain nd sewer applications including testing of joints, cost of jointing materials etc. complete in all respect. (Conform to IS 15328:2003, solvent cement shall conform 14182). 110 mm dia. |
| 221 | Fountain Work |
| 222 | Float: - Providing, laying & fixing of suitable float arrangment for 20 ft longitudinal fountain made up of FRP filled with PUF & suitable anchoring to sides or bottom including Filter station mesh filter for fountain/submersible pump made of SS mesh. |
| 223 | Providing & fixing of aerator jet nozzle of S.S/ brass plated complete inlet size 2”height of jet approx 10 FT. |
| 224 | Light & PLC controller :- Providing & fixing of programmable colour changing light 12 watt fix or sequence fixed 1 no. sequencing. |
| 225 | Providing laying & fixing of DMX controller for above light. |
| 226 | Control panel system electrical control panel made of 16 gauge CRC sheet powder coated with starter single phase preventer MCB volt meter TPN mCB protection circuit as per the requirement of foundation and space for step down transformer for the lights including all electrical wiring. |
| 227 | Supplying &installation of required capacity of three phase, 50 Hz,415V, deep well submersible pump steel body, as per IS of approved make, suitable upto 6 \" tube well with control panel starter suitable for submersible pump with dry run protection, single phase preventer, connections, including clamp, bore cap etc. as required as per specifications but excluding pipe and connection cable. 3 HP with upto 6 stages, head metre 55-7, discharge LPM 60-510 |
| 228 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 sq.mm multi strand |
| 229 | Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required |
| 230 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification.10.00 sq. mm. cable 4 X 10.00 sq. mm. |
| 231 | Sprinkler System |
| 232 | Piping networkProviding, laying & jointing in position HDPE pipe conforming to IS:4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers\" instruction, includingexcavation of trenches, refilling(Earth work includes 450mm of soil cover over the pipe and width of 300mm)HDPE pipe 160mm-10kg/cm2(PE-100) |
| 233 | Piping networkProviding, laying & jointing in position HDPE pipe conforming to IS:4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers\" instruction, includingexcavation of trenches, refilling(Earth work includes 450mm of soil cover over the pipe and width of 300mm)HDPE pipe 90mm-10kg/cm2(PE-100) |
| 234 | Sprinkler& AccessoriesProviding & Fixing of Pop up Sprinkler with Gear driven mechanism having 2\" female inlet, dia of coverage 84.0-92.0 m at 6.0-7.0 bar, capable of delivering discharge 9.08-15.6 lps and trajectory of throw 23°. The Sprinkler shall be available in (5) numerically coded interchangeable nozzle, the sprinkler nozzle assembly shall incorporated diffuser screw facility for radius reduction and shall be suitable for use in extremely saline and/ or dirty water condition, so that sprinkler shall not require secondary filtration of any kind. The sprinkler shall provide both part and continuous forward full circle adjustment from 40°to 360°. Sprinkler shall have minimum 16cm Pop up Stro ke to bring the rotating nozzle in clean environment. It shall besuitable for sports fields like Football, Rugby, Hockey, Cricket, Soccer & Baseball.It should have a feature of special internal rubber folding top, avoids the passage of powder, sand and dirty water around the telescopic pipe as approved by Engineer -in- charge. |
| 235 | Sprinkler& Accessoriesproviding and fixing of connecting assembly for 2\" PGP. |
| 236 | Sprinkler& AccessoriesProviding & Fixing of 1 1/4\" Two piece Aluminium Quick Coupling Valve (QCV) It has auto close lid made of heavy duty rubber when QCV is not in use. Dubble piece construction,having stainless steel valves as approved by Engineer -in- charge. |
| 237 | Sprinkler& AccessoriesProviding & Fixing of 1 1/4\" Steel Quick Coupling Valve (QCV) key with handle with11/4\"outletasapprovedbyEngineer-in-charge. |
| 238 | Sprinkler& AccessoriesProviding & Fixing of Metallic Service Saddle 90mm X 1 1/4\" |
| 239 | Volve and AccessoriesProviding & Fixing of 4\" Butterfly Valve for Head Unit. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi- directional smooth operation. The hydraulic body test pressure of the cast iron buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 11 bar as approved by Engineer -in-charge. |
| 240 | Volve and AccessoriesProviding & Fixing of 2.5\" Gun Metal Ball Valve for bypass arrangment. It shall be full bore, two piece design, lever operated, screwed Female BSP parallel threaded of 2.5\" dia as approved by Engineer -in-charge. |
| 241 | Volve and AccessoriesProviding and fixing of 4\" Foot valve as approved by Engineer -in- charge. |
| 242 | Volve and AccessoriesProviding & fixing of Valve box 20\" Rectangular Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stablizer with anti oxidants, resistant to moisture. It should be minimum 12\" height and 25\" length.Rain Spa/ MA IS/Arkal/Toro or as approved by Engineer -in- charge. |
| 243 | Volve and AccessoriesProviding and fixing of Aluminum pilot Pressure relief valve size 2\" along with bypass arrangement, cover & necessary fittings. It shall be adjustable Pressure setting from 22 PSI - 120 PSI for maximize performance. It should be high strength cast Aluminum body, Stainless Steel shaft offer, strength andcorrosion resistant. Oil tempered coil spring provides quick response for individual pressure rangeas approved by Engineer -in- charge. |
| 244 | Volve and AccessoriesProviding & fixing of a double acting Continuous Air release valve 2\" made of high strength plastic with fiber glass reinforced . The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Barsas approved by Engineer -in-charge. |
| 245 | Volve and AccessoriesProviding & fixing of disc filter (120 mesh) 50m3/hr having an inlet & two outlets connections of 3\", 2 pressure guaze ports of 3/4\", a helix made of fibre glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water, spinning particulate in suspension away from tec filtering element and so minimizing cleanings frequency, 3/4\" outlet for flushing at bottom of filter & maximum working pressure of 14 bars as approved by Engineer -in-charge. |
| 246 | Volve and AccessoriesProviding and fixing of pressure guaze ( glycerine filled), 4\" dial ( 0- 10kg/cm2) |
| 247 | Automation UnitProviding & Fixing of2\" BSP Straight flow Solenoid valve with flow control and \"pressure regulation unit\" which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather- resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for \" tamper proof\" operation. The valve shall operate with minimum 24 VAC at 10.5 bar.The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation as approved by Engineer -in- charge. |
| 248 | Automation UnitProviding and fixing of DBR connector It shall be pre filled, low voltage, dry splice, direct bury , waterproof wire connector that protect electrical connection from corrosion, and moisture. Each splice kit contains two wire nuts, water proof, Gel-filled housing and ideal splice organizer as approved by Engineer -in-charge. |
| 249 | Automation UnitProviding and fixing of1.5 sq. mm single core copper conductor cable (live wire) - as approved by Engineer -in-charge. |
| 250 | Automation UnitProviding and fixing of1.5 sq. mm single core copper conductor cable - as approved by Engineer -in-charge. |
| 251 | Automation UnitProviding and fixing of10 sq. mm single core copper conductor cable - as approved by Engineer -in-charge. |
| 252 | Automation UnitProviding and fixing conduit pipe 32mm dia, as approved by Engineer -in-charge. |
| 253 | Other System |
| 254 | Supply, Installation testing and commissioning of the IP dome camera shall be equipped with a 1/2.8 2 MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps) images, a 3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provide up to 98 ft (30 m) of IRillumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :- H.264, noise reduction: 3DNR,backlight compensation :- BLC/HLC/DWDR, encode mode:- CBR/VBR (freely adjustable in CBR, 5 levels in VBR). UL listed |
| 255 | Supplying and drawing 4+1 core shielded, 0.5 mm PVC insulated copper conductor un-armoured CCTV cable FRLS in existing surface/concealed, steel/PVC. conduit/ casing-n-capping as required. |
| 256 | Supply, installation, testing and commissioning of 6W wall mount with max SPL1M/1W 96dB. Frequency response of 160Hz-20KHz. The speaker should have tapings at 6W/3W (with require mounting arrangement) |
| 257 | Benches (Min- 3 seater ) - Park Type Benches |
| 258 | Installation of Various Play Fields- Ground Preparation for Tennis Court, Basketball Court and Vollyball Court |
| 259 | EXCAVATION - Excavation to a depth of 6 inches to remove all weeds and grass from its roots, create a slope of 1” in every 10’ in the sub-base on the shorter axis. Extreme care would need to be taken to ensure a correct slope of 1” in every 10’. |
| 260 | COMPACTION - Compaction of the sub-base will be by 8 – 10 ton roller. |
| 261 | ANTI TERMITE & WEEDECIDE -Carry out anti termite and weedicide on the total area by making 9” deep holes spaced 12” apart and injecting the chemicals and also spraying. |
| 262 | WATER BOUND MACADAM (WBM) - 200 mm thick Lay a 1st layer of 75mm compacted water bound macadam with good earth (not moorum). WBM to be densely compacted by keying and interlocking the stones to ensure no settlement takes place. Lay a 2nd layer of water bound macadam (75mm thick) same as above except the stone size will be smaller. |
| 263 | BITUMINOUS MACADAM - (Bitumen @3.5 % by weight) Lay a 50mm compacted thick Hot Mix asphalt BM course. |
| 264 | ASPHALTIC CONCRETE - (Bitumen @5.0 % by weight) Lay a 25 mm compacted thick Hot Mix A.C. course |
| 265 | SEAL COAT - Seal Coat with stone dust. |
| 266 | Flooring for Jogging and Children Play Area |
| 267 | 36mm Rubber Concrete for EPDM Flooring (Minimum Base Rubber 30MM and EPDM 6MM) |
| 268 | 15mm Rubber Concrete for Jogging Track Area (Minimum Base Rubber 9MM and EPDM 6MM) |
| 269 | Flooring for Skating Area |
| 270 | Acrylic Coating 5 Layer Hard Coat for Skating |
| 271 | Skating 2mm PU Flooring |
| 272 | Prepration of Ground and Installation of Natural Grass |
| 273 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge |
| 274 | Volley Ball Court (2) |
| 275 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 4mm dia wire or nuts, bolts andwashers as required complete as per the direction of Engineer-in-charge. |
| 276 | Volleyball Accessory Volleyball net with post |
| 277 | Basket Ball Court (2) |
| 278 | Basket Ball Flooring |
| 279 | Basketball Accessory 8” Round pipe 5.2mm (W.T) with 2.2 mtr distance from the board. Plus 25mm back board transparent Acrylic with International Standard die made framecoated die made frame with built in brackets for mounting. Plus Dunking Rim withthree Spring Mechanism. |
| 280 | Tennis Court (2) |
| 281 | Edge Wall (350 mm height) Laying a6\" retaining wall keeping the top level straight |
| 282 | Drain- Making an open saucer drain at the lower end |
| 283 | Synthetic Acrylic (8 Layers) - ITF Classified Category 1,2,3,4 & 5In this system we shall apply 1 layer of resurfacer5 layers of cushion,2 layers of colorand court markings. This is a cushioned system which makes for comfortable and enjoyable play. The product must be an ITF classidfied product in all the categories i.e. 1,2,3,4&5 |
| 284 | Tennis AccessoriesAmerican designed tennis net post and export quality tournament nets.They are of excellent quality and are used in all the major tournaments in the country.Net |
| 285 | Tennis AccessoriesAmerican designed tennis net post and export quality tournament nets.They are of excellent quality and are used in all the major tournaments in the country.Net Post |
| 286 | Tennis AccessoriesAmerican designed tennis net post and export quality tournament nets.They are of excellent quality and are used in all the major tournaments in the country.Water Removing Roller |
| 287 | PART 2 - Maintenance of Landscaping and Horticulture work |
| 288 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Permanent office accommodation. (as per yard stick 1Mali =1.25Acre |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail