|
| 1 | Dismantling of Plain/ corrugated steel sheeting, any gauge, thickness, in roof coverings including ridges and removing from site of work complete all as specified and as directed. |
| 2 | Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering and removing from site of work complete all as specified and as directed. |
| 3 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to all, self tapping screws, complete all as specified and as directed. |
| 4 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to ll, fixed with self tapping screws complete all as specified and as directed. |
| 5 | Dismantling timber in fillets, rafters,purlins etc. under 40 sqcm insection unframed work complete all as specified and as directed. |
| 6 | Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) |
| 7 | Roof truss framed trussed etc incl distance piece , cleats with necessery welding works etc Fe 410-W ( gde E-250) Quality A |
| 8 | MS Plates(plain or chequrred) channels, square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes without any attachment with MS Gde Fe 410-0 |
| 9 | Mild steel screw bolts (machine made) with hexogonal or square heads at one end & screwed the other or screwed both ends each screwed end to be fitted with washers & one hexagonal or square nut, length of boltn.exc 5 cm long, diameter of shank 11 mm to 15mm complete all as specified and as directed.. |
| 10 | Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long of dia of neck in mm exc 12 and not exc 20mm complete all as specified and as directed. |
| 11 | Framed work as in doors or gates of angle or other section with gusset plates, rails braces e4tc complete drilled for fixing of steel sheeting or other covering . To be prepared for hanging, or sliding with and incl either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering) running rails and guides and haninging also fastening and fixing complete conforming to FE-410 W (GDE-E-250) Quality-A |
| 12 | Mild plain black sheet in steel Gates and shutters or framed work cut to size of 1.60mm thick complete all as specified and as directed. |
| 13 | Dismanteling fencing wire mesh in fencing , any type complete all as specified and as directed. |
| 14 | Dismentling barbed wire any type, length and thickness complete all as specified and as directed. |
| 15 | Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion inconcrete or brickwork and making good disturbed portion complete all as specified and as directed. |
| 16 | Dismanteling MS worksof any Desc. Not otherwise provided for, complete all as specified and as directed. |
| 17 | Demolitionofconcrete (unreinforced) of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and as directed. |
| 18 | PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and as directed. |
| 19 | Angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size. |
| 20 | MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10cm long 11 to 15mm dia of shank complete all as specified and as directed. |
| 21 | Flat iron straps to chain link fencing or wind tie or any other work including drilling bolting or riveting etc complete all as specified and as directed. |
| 22 | Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified and as directed. |
| 23 | Fixing only chain link fencingany mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire, complete all as specified and as directed. |
| 24 | Round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 25 | Preparing new steel surfaces and applying two coats of syn thetic enamel paint over a coat of red oxide primer surface area not exc. 10cm inwidth or girth complete all as specified and as directed by Engr-in-Charge. |
| 26 | GI two strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc, complete all as specified and as directed. (Each line of wire to be measured.) |
| 27 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 28 | Demolition of brick/stone masonry built in cement mortar complete all as specified and as directed. |
| 29 | Brick work with sub class \"B\" brick st or curved on plan exceeding 6 mtr mean radious and built in cm 1:6 complete all as specified and as directed. |
| 30 | .-Ditto- As item29 above but Except bricks |
| 31 | Taking down cement plaster on brick/stone/ concretewall built in cement mortar complete all as specified and as directed. |
| 32 | 15 mm thick cement plaster on brick wall in cement mortar 1:4and plastered surfaces shall be even and smooth without using extra cement complete all as specified and as directed. |
| 33 | Material and labour for 5 mm thick rendering in cement and sand mortar 1:3 over brick or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 34 | Preparation of new of previously untreated plastered surface and appling two coats of white wash on walls complete all as specified and as directed. |
| 35 | Preparation of new plastered surfaces and applying twocoats of white wash on Ceiling complete all as specified & as directed by Engineer-in-Charge |
| 36 | Applying two coats of oil bound distemper over one coat of primer andputty including preparation of newly plastered surfaces of walls complete all as specified and as directed. |
| 37 | Preparing new plastered surfaces & applying two coats of cement base paint on walls complete all as specified and as directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and as directed. |
| 39 | 3 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden bead in square n exc 0.50 sqm in each pane complete all as specified and as directed. |
| 40 | 3 mm thick figured glass, pin head type, ordinary quality and glazing with oil putty or wooden bead in square n exc 0.50 sqm in each pane complete all as specified. |
| 41 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed in repairs with tinned tacks or galvanized wire staples complete all as specified and as directed. |
| 42 | Steel rolling shutters, with or without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type thickness of lath 1.00 mm complete all as specified and as directed |
| 43 | Taking down existing steel rolling shutter complete incl repair /replacement of ball bearing repair to top cover , ancohoring rod hasp and stepple incl repair to gear box and provision of gear box crank handle completely making the shutter operational by greasing all as directed by Engr in charge( incl provision of one coat of synthetic enamal paint in rolling shutter ) size of shutter n exc 10 Sqm, complete all as specified and as directed. |
| 44 | Demolitionof cement concrete in ground floor and paving n. exc. 15 cm thickness (below or above ground level) in cement concrete, complete all as specified and as directed. |
| 45 | PCC type D2 1:4:8 (40 mm Gr. Agg ) 100mm thickas insub base complete all as specified and as directed by Engr-in- charge. |
| 46 | Laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 50mm thick sand layer watering and ramming all as specified and as directed by Engr-in- charge. |
| 47 | Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in coping/cills/edging, bed blocksincluding necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge. |
| 48 | 75mm thick concrete 1:3:6 Type C2 for plinth protection,at every 3.0 Mtr intervals and turning , with joints shall with between sand Mix or bituminous mastic complete all as specified and as directed by Engr-in- charge. |
| 49 | Cement concerte 1:3:6type C2 (using 40mm graded stone agg.) as in surface channels and drain complete all as specified and directed by Engr-in-charge. |
| 50 | 100mmthick plain cement concrete 1:2:4 type B2(using 40 mm graded stone aggregates) as in flooring finished even and smooth without using extra cement, complete all as specified and as directed. |
| 51 | 150mmthick plain cement concrete 1:2:4 type B2(using 40 mm graded stone aggregates) as in flooring finished even and smooth without using extra cement, complete all as specified and as directed. |
| 52 | Forming 12 mm thk expansion joints for 100 mm thk of floor filled with pre formed bituminus filler and top 30 mm primed and sealed with sealent compound Grade B |
| 53 | Description all as per srl item No.52here in before but for 150 mm thik of floor, complete all as specified and as directed. |
| 54 | Chequared Cement Concrete Tiles 20 CM x 20 CM X 25 mm thick set and jointed in cement slurry and pointed in neatgrey cement&pigment in floors over screed bed 15 mm thk in cm 1:6 complete all as specified and as directed. |
| 55 | Dismantling floor hearth or wall tilling incl cement mortar beding (but not backing) & stacking at site as directed and disposing of debris to distance upto 250M complete all as specified and as directed. |
| 56 | Coloured joint free Non skid ceramic tile 7 to 8 mm thk area of each tiles Exc 0.18 sqm & nexc 0.38 sqm as in floor set & jointed in neat cement slurry and pointed in white/colored cement laid over screed bed 15 mm thk in cm 1:6 complete all as specified and as directed. |
| 57 | .-Ditto- As item56 above but as in skirting / vertical surface over screed on wall 10 mm thick in CM 1 : 4 complete all as specified and as directed. |
| 58 | ColouredNon skid ceramic tile 7 to 8 mm thk area of each tiles Exc 0.06 sqm & nexc 0.11 sqm as in floor set & jointed in neat cement slurry and pointed in white/colored cement laid over screed bed 15 mm thk in cm 1:6 complete all as specified and as directed. |
| 59 | 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as in sub floor/leveling course to receive topping complete all as specified and as directed. |
| 60 | Marble makrana white tiles 30cmx20cmx20mm machine cut , bedded jointed and pointed with grey cement slurry including cutting and polishing types complete including 20mm thick screed bed or a layer of beddingfor laying of floor finishes in cement mortar 1:4 complete all as specified and as directed. |
| 61 | .-Ditto- As item60 above but as in skirting / vertical surface over screed on wall 10 mm thick in CM 1 : 4 complete all as specified and as directed. |
| 62 | 20 to 25 mm thick machine cut kota stone slabs of suitable size of kota stoneas in floors bedded in grey jointed, pointed incoloured cement incl cutting &grinding and polishing including 20mm thick screed bed or a layer of beddingfor laying of floor finishes in cement mortar 1:4 complete all as specified and as directed. |
| 63 | .-Ditto- As item62 above but as in skirting / vertical surface over screed on wall 10 mm thick in CM 1 : 4 complete all as specified and as directed. |
| 64 | Glazed coloured ceramic tiles 300mm & 200mm x6 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4complete all as specified and as directed. |
| 65 | Glazed coloured ceramic tiles 350mm x 250mm x7 mm/450mm x 350mm x7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4complete all as specified and as directed. |
| 66 | 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of typeincl backing coat 10mm thick in CM 1:4 complete all as specified and as directed. |
| 67 | Vitreous chinasquatting pan ORRISA PATTERN size 580x440 mm white with integral foot rests excluding flushing cistern & flush pipe fixed in repairs including P or S trap complete all as specified and as directed. |
| 68 | Vitreous china wash down water closet pan (padestal pattern) white including fixing bolts (excluding flushing cistern and flushing pipe) with plastic water closet seat cover any colour closed pattern with recessed bottom including mild steel chromium plated aluminium hinging device and fixed in repairs complete all as specified and as directed. |
| 69 | PVC (SWR) floor trap with grating including jointing with solvent cement cement 75 mm dia, fixed in repairs, complete all as specified and as directed. |
| 70 | PVC low/high level flushing cistern white 10 liters capacity including pvc inlet pipe with brass check low level full both sides along with PVC flush pipe 32 mm dia jointed to WC and handle incl brackets fixed in repairs complete all as specified and as directed. NOTE: Removing existing flushing system of CI or any other quality incl brackets. |
| 71 | Plastic water closet seat cover any colour closed pattern fixed in repairs with flat bottom and cover and mild steel chromium plated hingingdevice complete all as specified and as directed. |
| 72 | Vitreous china wash basin white flat back size 580x450mm including waste pipe and plug and porcelain stopper and brackets incl. Cutting for and pinning in ends for brackets or erecting stand along with 32 mm dia CP waste coupling and PVC waste pipe fixed in repairs complete all as specified and as directed. |
| 73 | Pillar taps fency type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or coldwith long screwed shanks and fly nuts, screwed for iron pipe and fixed 15 mm dia of pipe complete all as specified and as directed. |
| 74 | CP grating 125 mm round fixed on floor/ nahani trap fixed in repairs with 1:1 cement mortar complete all as specified and as directed. |
| 75 | S&F in repairs 600x 450 mm bevalled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and as directed. |
| 76 | PVC connection 15 mm dia 45 cm long with 02 Nos PTMT check nuts fixed in repairs with washer complete all as specified and as directed. |
| 77 | PVC connection 15 mm dia 60 cm long with 02 Nos PTMT check nuts fixed in repairs with washer complete all as specified and as directed. |
| 78 | 32 mm dia PVC waste pipe 60 cm long fixed in repairs complete all as specified and as directed. |
| 79 | CP jet spray with one mtr flexible tube 15 mm dia for Ewc fixed in repairs including all connection complete all as specified and as directed. |
| 80 | Health faucets with flexible tube 15 mm dia for Ewc, fixed in repairs including all connection complete all as specified and as directed. |
| 81 | 25 mm dia s. Steel curtain rod fixed in repairs with fixing brackets, complete all as specified and as directed |
| 82 | 25 mm dia s. Steel fency type ends for 25 mm dia curtain rod, fixed in repairs, complete all as specified and as directed. |
| 83 | 25 mm dia s. Steel fency type corner for 25 mm dia curtain rod, fixed in repairs, complete all as specified and as directed. |
| 84 | Chromium plated towel rod 600 mm long screwed down for fixing to walls with screw, fixed in repairs, complete all as specified and as directed. |
| 85 | PVC SWR pipe single socketed in any length with rubber ringsjoints fixed to any position 110mm, complete all as specified and as directed. Make- Prince/Supreme. |
| 86 | PVC bend any radius 110mm bore, complete all as specified and as directed. |
| 87 | PVC pipe (SWR) single socketed in any length fixed to any position 75mm bore, complete all as specified and as directed. |
| 88 | PVC bend any radius 75mm bore, complete all as specified and as directed. |
| 89 | Cleaning and removing all scales and dirt, algae, fungus etc. From RCC/PVC water tanks and from mouth of pipes with bleaching powder etc. After dewatering/draining water and removing vegitation around the tanks for the following tank capacities including writing with paint the date of cleaning on the tanksExceeding 250 Liters but not exceeding 500 Liters, complete all as specified and as directed . |
| 90 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stonesbore of pipe 15mm, complete all as specified and as directed. |
| 91 | All as per item No. 90 above but bore of pipe 20mm, complete all as specified and as directed. |
| 92 | GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm, complete all as specified and as directed. |
| 93 | All as per item No. 92 above but bore of pipe 20mm, complete all as specified and as directed. |
| 94 | Refixing of old steel tubing and connections in new or old position (wall ceiling floor etc) 15 mm dia, complete all as specified and as directed. |
| 95 | All as per item No. 94 above but bore of pipe 20mm, complete all as specified and as directed. |
| 96 | Dismantling water tanksremoving to site of capacity n.exc. 500 ltrs and setting aside for repairs etc, complete all as specified and as directed. |
| 97 | Rotational moulded polythene water storage tanks, cyclenderical vertical with closed top, hoisted and fixed in position incl float valve 20 mm dia PTMT all as specified in SSR Part -I of capacity 500 ltrs. |
| 98 | Water tank PVC cover upto 500liters capacity fixed in repairs, complete all as specified and as directed. |
| 99 | PVC float valve high pressure with polythene float and fly nut, fixed in repairs, complete all as specified and as directed, screwed for iron pipe of bore 20 mm dia or brass ferrule in repairs. |
| 100 | Gunmetal globe valve with iron wheel head, screwed both ends for iron pipe of bore 20 mm dia, fixed in repairs, complete all as specified and as directed. |
| 101 | All as per item No. 100 above but bore of pipe 15mm, complete all as specified and as directed. |
| 102 | Bib tap chromium platedbrass 15 mm dia long body fancy type half thread, fixed in repairs, complete all as specified and as directed. |
| 103 | 15 mm dia stop valveconnected type cast copper alloy screwes down high pressure chromium plated with long shank including dismantling portion of the wall as required including making goodto match with existing, fixed in repairs, complete all as specified and as directed. |
| 104 | Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land. |
| 105 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 106 | Cement concrete typeB1, 1:2:4 mix usisng 20mm graded stone aggregates as in levelling course in rooftops, for roof treatment, complete all as specified and as directed. |
| 107 | M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound @ 3% by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately) |
| 108 | Suplying only water proofing compound, complete all as specified and as directed. |
| 109 | Water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under:-(a) Applying cold bitumenous oil based primer IS No 3383 @ 250 Gms/Sqm and laying APP Modified membrane with non woven polymer reinforcement / mat core (Centre core) not less than 3 mm thick and not less than 3.50 kg/sqm the overlap shall be 100 mm on length side and 100 mm on width side and all as per manufacturer instruction complete.The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned toremove all foreign materials & dust to receive primer.Top surface shall be applied with 0.15 Kg/Sqm bitumenous aluminium paint. |
| 110 | Cutting/cleaning away small trees sapling surbs and under growth roots from brick wall, chajjas etc including taking out complete root from inside wall chajjas and making good surfaces in cement concrete (1:2:4) type or in CM (1:4) to match the existing surface complete all as specified and as directed. |
