|
| 1 | Excavating in trenches for foundations, laying / taking out of pipes/cables, in any type of soil, not exc 1.50 m in depth and not exc 1.50 m in width and getting outcomplete all as specified and as directed. |
| 2 | Returning, filling in soils in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 3 | Removing excavated soils to a distance exceeding 50 mtr and not exc 100 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point. |
| 4 | Taking up from trenches steel water tubing/cast iron / ductile iron pipes including fittings and removing from site of work complete all as specified and as directed of bore:- |
| 5 | 200 mm bore (Internal dia) CI/DI pipes |
| 6 | 150 mm bore (Internal dia) CI/DI pipes |
| 7 | 100 mm bore (Internal dia) CI/DI pipes |
| 8 | 100 mm bore (Internal dia) GI pipes |
| 9 | 80 mm bore (Internal dia) GI pipes |
| 10 | 50 mm bore (Internal dia) GI pipes |
| 11 | 40 mm bore (Internal dia) GI pipes |
| 12 | 25mm bore (Internal dia) GI pipes |
| 13 | 20mm bore (Internal dia) GI pipes |
| 14 | NOTE:- Excavation and earth work shall be measured and paid for separately. |
| 15 | All as per the description of serial item No. 4 here in above but taking down from walls etc of bore:- |
| 16 | 100 mm bore (Internal dia) GI pipes |
| 17 | 80 mm bore (Internal dia) GI pipes |
| 18 | 50 mm bore (Internal dia) GI pipes |
| 19 | 40 mm bore (Internal dia) GI pipes |
| 20 | 25 mm bore (Internal dia) GI pipes |
| 21 | 20 mm bore (Internal dia) GI pipes |
| 22 | 15 mm bore (Internal dia) GI pipes |
| 23 | Supply, laying, jointing, testing and commissioing ductile iron pressure pipes with socket & spigot ends having ISI stamping / marking conforming to IS:8329/2000 in standard length of 5.50 metre - 6.00 metre of classification K-9 suitable for push onrubber type (gasket jointing) with cement mortar lining in the pipes, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure, complete all as specified and as directed of bore (internal dia): |
| 24 | 200 mm |
| 25 | 150 mm |
| 26 | 100 mm |
| 27 | NOTES:- (i) Cutting of existing CI/DI/GI pipes for making connection shall be measured and paid for separately.(ii)CI/DI joint specials including rubber ring joints shall be measured and paid for separately. (iii) Excavation and earth work shall be measured and paid for separately. |
| 28 | Steel water tubing, medium grade, galvanised with all fittings, like tees, nipples, unions etc laid in trenches, complete all as specified and as directed, of bore (Internal dia): |
| 29 | 100 mm |
| 30 | 80 mm |
| 31 | 50 mm |
| 32 | 40 mm |
| 33 | 25 mm |
| 34 | 20 mm |
| 35 | NOTE:- Excavation and earth work shall be measured and paid for separately. |
| 36 | All as per the description of serial item No. 7 here in above but fixed on walls with and including appropriate hooks/clamps and ceiling or laid in floors of bore (internal dia): |
| 37 | 100 mm |
| 38 | 80 mm |
| 39 | 50 mm |
| 40 | 40 mm |
| 41 | 25 mm |
| 42 | 20 mm |
| 43 | 15 mm |
| 44 | NOTES:- (i) Cutting in brick walls for passing through pipes and making good the dusturbed surface to match with existing finish is deemed included in the quoted rate.(ii) Unit rate is inclusive of fixing pipes to walls with clips, wall, hooks, wooden plug etc. |
| 45 | 3 layer PP-R (Poly propylene random co-polymer) concealed pipes SDR7.4 (IPN-16) UV stablized and antimicrobial fusion welded having thermal stability for hot and cold water supply including PP-R plain and brass threaded poly propylene random fittings like ends , elbow, union, tees reducing tees, adopers, saddles (snap clips) wall, clips, hooks, protective lild steel tube sleeves and cutting through wall, floors and making good and also cutting, screwing and waste fixed complete to walls, ceiling or in floors as per IS: 15801, complete all as specified and as directed, outer dia of pipe:- |
| 46 | 110 mm |
| 47 | 90 mm |
| 48 | 50 mm |
| 49 | 40 mm |
| 50 | 25 mm |
| 51 | 20 mm |
| 52 | NOTES:- (i) Cutting in brick walls for passing through pipes and making good the dusturbed surface to match with existing finish is deemed included in the quoted rate.(ii) Fitting like galvanised/ball valve/branch connection shall be measured and paid for separately. |
| 53 | All as per description of serial item No. 9 here in above but laid in trenches, outer dia of pipe:- |
| 54 | 110 mm |
| 55 | 90 mm |
| 56 | 50 mm |
| 57 | 40 mm |
| 58 | 25 mm |
| 59 | 20 mm |
| 60 | NOTES:- (i)Excavation and earth work shall be measured and paid for separately.(ii) Fitting like gate valve/ball valve/branch connection shall be measured and paid for separately (iii)Fitting like galvanised/ball valve/branch connection shall be measured and paid for separately |
| 61 | All as per description of serial item No. 9 here in above but laid on ground or fixed on wall surface with and including hooks/clamps of suitable size and shape or as directed by Engr-in-Charge, outer dia of pipe:- |
| 62 | 100 mm |
| 63 | 90 mm |
| 64 | 50 mm |
| 65 | 40 mm |
| 66 | 25 mm |
| 67 | 20 mm |
| 68 | Cutting of existing CI/DI pipeline of size 80 mm bore (Internal dia) to 150 mm bore (Internal dia) for repairs / replacement of pipe line and insertion of collars/ tail pieces, tees etc including dewatering of pit if required, complete all as specified and as directed NOTE:- Excavation and earth work shall be measured and paid for separately. |
| 69 | Ductile iron fittings such as bends, tapers, single branch, \"Y\" junction, collars, mechanical collars, caps and plugs including necessary nuts, bolts and washers, any type, any size, spigot socket or flanged ends of size upto 150 mm bore (Internal dia) conforming to IS-9523/2000 with pressure rating PN-1 (all fittings to be coated for rust prevention i.e. external coating zinc rich paint with finishing layers of bituminous paint as perAnnexure-A of IS:9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure-B of IS-9523/2000) complete all as specified and as directed. NOTES :- (i)Rubber ring joints shall be measured and paid for separately. (ii) Excavation and earth work, if required, shall be measured and paid for separately.(iii) Cutting of existing CI/DI/GI pipes for making connection shall be measured and paid for separately. |
| 70 | Material and labour for rubber ring type push joints ISI marked as per IS: 5382 with jointing material complete all as specified and as directed for spigot and socket and DI pipes and fitting of bore:- |
| 71 | 200 mm |
| 72 | 150 mm |
| 73 | 100 mm |
| 74 | Gun metal globe or gate valve with iron wheel head ISI marked screwed both ends for iron pipes and fixed in replacement (including taking down) complete all as specified and as directed of bore (Internal dia):- |
| 75 | 50 mm |
| 76 | 40 mm |
| 77 | 25 mm |
| 78 | 20 mm |
| 79 | 150mm |
| 80 | Cast iron non rising sluice valve with stainles steel spindle flanged ends PN 1.6 ISI marked as per IS-14846/2000 and cast iron operating wheel including gasket, nuts, bolts and washer and fixed in position in replacement (including taking down) complete all as specified and as directed of pipe of bore (Internal dia):- |
| 81 | 150 mm |
| 82 | 100 mm |
| 83 | Cast iron sluice valve with stainles steel spindle, flanged ends PN 1.6 ISI marked as per IS-14846/2000 and cast iron operating wheel including gasket, nuts, bolts and washer and fixed in position in replacement (including taking down) complete all as specified and as directed of pipe of bore (Internal dia):- |
| 84 | 200 mm |
| 85 | 150 mm |
| 86 | 100 mm |
| 87 | 80 mm |
| 88 | PP-R gate valve (brass insert) as per requirement, fixed / fitted in position complete all as specified and directed for outer dia of pipe:- |
| 89 | 50mm |
| 90 | 40 mm |
| 91 | 25 mm |
| 92 | 20 mm |
| 93 | Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in replacement (including taking down) complete all as specified and as directed for pipe of bore (internal dia):- |
| 94 | 40 mm (Minimum weight 690 gm) |
| 95 | 25 mm (Minimum weight 455 gm) |
| 96 | 20 mm (Minimum weight 210 gm) |
| 97 | 15 mm (Minimum weight 142 gm) |
| 98 | Replacing old/worn out leaking joints in CI/DI pipe line by burning old lead making joint leak proof with new spun yarn, old lead and additional lead, if required, complete all as specified and as directed pipe of bore (internal dia):- |
| 99 | 200 mm |
| 100 | 150 mm |
| 101 | 100 mm |
| 102 | 80 mm |
| 103 | NOTE:- Excavation and earth work if any, required, cutting of existing CI/DI pipe if any required and dewatering is deemed to be included in the unit rate. |
| 104 | Taking down existing defective mild steel spindle from sluice valve after opening top cover of the valve, replacing the same with metal fitting, grinding and making threads including replacing defective check nuts of suitable size to match the existing and repairing the same including fixing minor parts such as nuts, bolts washer etc complete al as specified and as directed or bore (internal dia):- |
| 105 | 200 mm |
| 106 | 150 mm |
| 107 | 100 mm |
| 108 | Construction of brick masonry valve pit/chamber of size 600mmx600mmx600mm (internal dimension of chamber to be reckoned from the top of mild steel cover) including mild steel sheet cover fabricated out of 3mm thick mild steel sheet and frame of angle iron of sie 40mmx40mmx4mm with fixing arrangement and painted with two coats of synthetic enamel paint tint / shade as approved by Engr-in-Charge over a coat of red oxide primer on mild steel sheet/cover and frame including necessary excavation and earth work, in any type of soil, returning filling in of soils, removal of surplus soil to a distance exc 50m and not exc 100m as directed, plain cement concrete 1;4:8 type D-2 as in foundation, brick work with sub class \"B\" old size well burnt brick in cement mortar 1:4, 15mm thick plastering internally and externally in cement morter 1:4, 100 mm thick plain concrete 1:2:4 type B-1 as in flooring, finished even and smooth complete all as specified as shown in drg No STD-1258 and as directed. |
| 109 | All as per the description of Serial No 22 here in above but of size 900mmx900mmx900mm (internal dimensions) |
| 110 | Locating out the fault in GI pipes by excavting the soil removing the fault by replacing the piece of pipes, pipe socket, cleaning the pipe and jointing it with union socket and other fittings as requiredcomplete all as specified and as directed for pipe of bore (internal dia): |
| 111 | 100mm to 200mm |
| 112 | 40mm to 80mm |
| 113 | 15mm to 25mm |
| 114 | NOTE: Excavation and earth work as required and fitting/fixture as required deemed included in the unit rate. |
