Repair / Maintenance Of Unserviceable Motors, Pump Sets, Starters, Panel Boards Incl Switch Gears, Repair / Maint Of Ro Plant, Dosing Pumps Including Cleaning Of Ug Sumps Ohts And Other Allied Misc Connected Works At Jasai Mil Stn Under Ge ( A ) Ba
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Dec 2021
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE ARMY BARMER → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Maintenance Of Unserviceable Motors, Pump Sets, Starters, Panel Boards Incl Switch Gears, Repair / Maint Of Ro Plant, Dosing Pumps Including Cleaning Of Ug Sumps Ohts And Other Allied Misc Connected Works At Jasai Mil Stn Under Ge ( A ) Barmer Repair / Maintenance Of Unserviceable Motors, Pump Sets, Starters, Panel Boards Incl Switch Gears, Repair / Maint Of Ro Plant, Dosing Pumps Including Cleaning Of Ug Sumps Ohts And Other Allied Misc Connected Works At Jasai Mil Stn Under Ge ( A ) Barmer
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Dec-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L cleaning of RCC under ground sump of capacity 1.50 lakh gallons at Jasai dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm thick and 15 cm in height) complete all as specified anddirected by Engineer-in-charge. |
| 2 | All as per above item no. 1 but capacity 50000 gallons |
| 3 | All as per above item no. 1 but capacity 20000 gallons |
| 4 | M&L cleaning of shallow wells of size 5 m dia and 30 m depth, cutting grass inside the well, removeing mud / silt settled in the bottom including painting of top cover of grill with two coats of rust proof synthetic enamel paint complete all as specified anddirected by Engineer-in-charge. |
| 5 | M&L applying two coats of synthetic enamel paint on pump,motor,cast iron pipes installed at pump (as per MES colour code) inlet and outlet pipe, header, GI suction pipe, from sum bottom to pump ,including writing letter/figure 5mm thick and 4 cm in height with black paint over white base in capital letter complete all as specified and as directed by Engineer-in-charge.Note:Subject matter for writing shall be provided by Engineer-in-charge. |
| 6 | Supply and laying of 80 mm bore dia GI tubing, medium grade (ISI marked) galavanised with all fittings and fixed to walls / celing / laid in floor / fixed on PCC pillars suitable for pump suction pipe, connection, testing and commissioning, incld taking down / out of old u/s existing pipecomplete all as specified and directed by Engineer-in-charge. |
| 7 | All as per aboveitem no. 6.00 but Dia 100 mm bore |
| 8 | Supply and laying of 15 mm bore dia GI tubing, medium grade galavanised with all fittings and fixed to walls / celing / laid in floor suitable for pump suction pipe, connection, testing and commissioning, incld taking down / out of old u/s existing pipecomplete all as specified and directed by Engineer-in-charge. |
| 9 | Supply and fixing in replacement of GI flanges suitables for 100mm bore pipe eith bolt holes drilled at same oitchcircle dia as per existing model incld rubber joints GI nut & boltscomplete all as specified and directed by Engineer-in-charge. |
| 10 | Supply and fixing in replacement of GI flanges suitables for 80mm bore pipe eith bolt holes drilled at same oitchcircle dia as per existing model incld rubber joints GI nut & boltscomplete all as specified and directed by Engineer-in-charge. |
| 11 | S&F fubber or fibre board gaskets for flanged joints suitable for 80mm bore pipes complete all as specified and as directed by Engr-in-Charge |
| 12 | S&F fubber or fibre board gaskets for flanged joints suitable for 100mm bore pipes complete all as specified and as directed by Engr-in-Charge |
| 13 | S&F fubber or fibre board gaskets for flanged joints suitable for 150mm bore pipes complete all as specified and as directed by Engr-in-Charge |
| 14 | S&F fubber or fibre board gaskets for flanged joints suitable for 200mm bore pipes complete all as specified and as directed by Engr-in-Charge |
| 15 | Supply and fixng in replacement offully automatic star Delta starter oil immersed type suitable for 7.50 HPpump set motor,relay range 7.5 to 11 Amp, 3 phase 415 volt, 50 Hz, with complete accessories.Make :MK 1 FASD cat no.SS96254 of L&T or its equivalent make of Siemens / C&S Electricals / Havells / Standard. |
| 16 | Supply and fixng in replacement offully automatic star Delta starter oil immersed type suitable for 10 HPpump set motor,relay range 9 to 16 Amp, 3 phase 415 volt, 50 Hz, with complete accessories.Make :MK 1 FASD cat no.SS96257 of L&T or its equivalent make of Siemens / C&S Electricals / Havells / Standard. |
| 17 | Supply and fixng in replacement offully automatic star Delta starter oil immersed type suitable for 15 HPpump set motor,relay range 13 to 21 Amp, 3 phase 415 volt, 50 Hz, with complete accessories.Make :MK 1 FASD cat no.SS96259 of L&T or its equivalent make of Siemens / C&S Electricals / Havells / Standard. |
| 18 | Supply and fixng in replacement of fully automatic star Delta starter oil immersed typesuitable for 20 HP pump set,3 phase 415 volt, 50 Hz, relay range 20-32 Amps, with complete accessories.Make :MK 1 FASD cat no. SS 95892 of L&T or its equivalent make of Siemens / C&S Electricals / Havells / Standard. |
| 19 | Supply and fixing in replacement offully automatic star Delta starter , heavy duty 4 pole contactor type TC1DX, over load relay LR 3d, Auto start switch, 3 Position selector switch and voltmeter, ammeter, ON/OFF LED push button switch with relay range 13 to 21 Amp, 3 phase 415 volt, 50 Hz, with complete accessories.Make :L&T Cat Part No. SS95984COCO or its equivalent make of Legrands/C&S Electricals / Havells / Standard. |
| 20 | Supply and fixing in replacement offully automatic star Delta starter , heavy duty 4 pole contactor type TC1DX, over load relay LR 3d, Auto start switch, 3 Position selector switch and voltmeter, ammeter, ON/OFF LED push button switch with relay range 20 to 32 Amp, 3 phase 415 volt, 50 Hz, with complete accessories.Make :L&T Cat Part No. SS95975COCO or its equivalent make of Legrands/C&S Electricals / Havells / Standard. |
| 21 | M&L for Inspection, checking of defect, repair / replacement of defective parts, maintenance of existing Motor Pump Starters of any type OIl immersed, Star Delta, DOL etc complete all as specified and as directed .Note:-(a) Spare parts for replacement shall be measured and paid for separately under respective item as \"Supply only\".(c) The cost of replacement of small parts such as nuts, bolts, washer, screws, thimble lugs, Moving Contacts, Arc Shields, Contact Bridges without contacts, wires etc shall be deemed to be included in unit rates quoted and nothing extra shall be admissible on this account(d)All tools, plant, equipment etc required for service shall be arranged by contractor at his own. |
| 22 | Supply only for replacement of Power Contactors 415V AC (3/4 Pole) 12 - 22 AmpAuxiliary Contacts :1 NO or 1 NC suitable for 7.5 HP to 15 HP complete all as specified and as directed . Make :C&S or equivalent. |
| 23 | Supply only for replacement of Power Contactors 415V AC (3/4 Pole) 20 - 32 AmpAuxiliary Contacts :1 NO or 1 NC suitable for 20 HP complete all as specified and as directed . Make :C&S or equivalent. |
| 24 | Supply only for replacement of Power Contactors 415V AC (3/4 Pole) 40-80 AmpAuxiliary Contacts :1 NO or 1 NC suitable for 30 to 60 HP complete all as specified and as directed . Make :C&S or equivalent. |
| 25 | Supply only for replacement of Pneumatic Timer Block 1 sec to 30sec - Front Mounted, Star Delta / on delay suitable for Power Contactors 415V AC (3 Pole) Auxiliary Contacts :1 NO or 1 NCcomplete all as specified and as directed . Make :C&Sor equivalent. |
| 26 | Supply only for replacement of Thermal Overload Relays Direct Mounting, Relay Setting Range Amp 18-25 A complete all as specified and as directed . Make :C&Sor equivalent. |
| 27 | Supply only for replacement of Thermal Overload Relays Direct Mounting, Relay Setting Range Amp 23-32 A complete all as specified and as directed . Make :C&Sor equivalent. |
| 28 | Supply only for replacement of Thermal Overload Relays Direct Mounting, Relay Setting Range Amp 48-65A complete all as specified and as directed . Make :C&Sor equivalent. |
| 29 | Supply only for replacement of Analogue Ammeter complete all as specified and as directed . Make :C&S or equivalent. |
| 30 | Supply only for replacement of Analogue Voltmeter complete all as specified and as directed . Make :C&S or equivalent. |
| 31 | Supply only for replacement of LED Indicating lamp (Red/Blue/Green) complete all as specified and as directed . Make :C&S or equivalent.Note :- Indicating lamp shall be of any of the colour mentioned and not set of three will be measured and paid as single unit i.e. \"Each\". |
| 32 | Supply only for replacement of Start/Stop Push Button complete all as specified and as directed . Make :C&S or equivalent. |
| 33 | S&F in replacement of old unserviceable single Phase Preventer VSP3 type suitable for motor protectionand making all incoming and out going electric connections complete all a specified and directed. Make: Minilec/Jepro/Gelco. |
| 34 | S & F in replacement of CI Non Return Valve of size 80 mm bore for CI/DI pipe line with rubber gasket of suitable size including connection and testing complete all as specified and as directed. |
| 35 | S & F in replacement of CI Non Return Valve of size 50 mm bore for CI/DI pipe line with rubber gasket of suitable size including connection and testing complete all as specified and as directed. |
| 36 | S & F in replacement of Pressure gauge 4\"dial 0-14 kgs rating for CI/DI pipe line including connection and testing complete all as specified and as directed. |
| 37 | S & F in replacement CI foot valve of size 100 mm bore for under ground sump suction CI/DI line including nipple of suitable size,connection and testing complete all as specified and directed by Engineer-in-charge. |
| 38 | S & F in replacement CI foot valve of size 80 mm bore for under ground sump suction CI/DI line including nipple of suitable size,connection and testing complete all as specified and directed by Engineer-in-charge. |
| 39 | S & F in replacement CI foot valve of size 50 mm bore for under ground sump suction CI/DI line including nipple of suitable size,connection and testing complete all as specified and directed by Engineer-in-charge. |
| 40 | M&L painting with two coats of synthetic enamel paint over a coat of red oxide primer of steel surfaces of valvesof size 80mm to 200mm(in any position)including scraping and completely removing old paintcomplete all specified and directed by Engineer-in-charge. |
| 41 | M&L in replacement of PVC insulated and PVC sheated 3 core 4.00 sqmm1100 V, industrial flat , copper conductor, heavy duty, cable suitable for submersible pump motor complete all specified and directed by Engineer-in-charge. |
| 42 | M&L in replacement of PVC insulated and PVC sheated 3 core 6.00 sqmm1100 V, industrial flat, copper conductor, heavy duty,cable suitable for submersible pump motor complete all as specified and directed by Engineer-in-charge. |
| 43 | M&L in replacement of PVC insulated and PVC sheated 3 core 10.00 sqmm1100 V, industrial flat, copper conductor, heavy duty,cable suitable for submersible pump motor complete all as specified and directed by Engineer-in-charge. |
| 44 | M&L in replacement of bearing coolent pipe made out of best quality PVC with ferrule suitable for 15 to 40 HP pump motor complete all as specified and directed by Engineer-in-charge.Make:- Kirloskar / Mather platt. |
| 45 | Chemical analysis and testing of water sample through registered lab including collection of water from 8 Nos shallow wells and 04 Nos Sump located at Jassai as directed by Engineer-in-charge and submitting test report to department complete all as specified and directed by Engineer-in-charge. |
| 46 | Bactorilogical test of water sample through registered lab including collection of water from 8 Nos shallow wells and 04 Nos Sump located at Jassai as directed by Engineer-in-charge and submitting test report to department complete all as specified by Engineer-in-charge. |
| 47 | Inspection, checking of defect, repair / replacement of defective parts, sensor and maintenance of existing RO Plant of 9000 Litres capacities (Make: - ROCHEM) installed at \"D\" Area of Jasai Mil stn as per maintenance manual of manufacturer to meet the required condition of water by back washing cleaning of membrane, cleaning of cartridge filter, servicing of chemical dozer, calibration of level indicator, cleaning of chemical Tank and all control valves etc complete all as specified and directed by Engineer-in-charge.Note: (a) The periodicity of visit is normally one month interval but in case of some emergency.The complaint/repairs required if any shall be rectified within 24 hours to be attended as directed by Engineer-in-Charge, (b) Spare parts for replacement and chemical required for servicing of RO plant shall be measured and paid for separately under respective item of BOQ, (c) The cost of replacement of small parts such as nuts, bolts, washer, screws, thimble lugs, gasket, rubber washer, wires etc shall be deemed to be included in unit rates quoted and nothing extra shall be admissible on this account(d)All tools, plant, equipment etc required for service shall be arranged by contractor at his own. |
| 48 | All as per Srl Item No 47 above but RO plant of capacity of 3000 Litres Per Hour |
| 49 | All as per Srl Item No 47 above but RO plant of capacity of 250 Litres Per Hour |
| 50 | All as per Srl Item No 47 above but RO plant of capacity of 50 Litres Per Hour |
| 51 | Supply only for replacement,Cartridge filter 2.5\" x 30\" of RO plant with the same make and type / model number to match with existing complete all as specified and directed by Engineer-in-charge. |
| 52 | Supply only for replacement,Cartridge filter 2.5\" x 20\" of RO plant with the same make and type / model number to match with existing complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply only for replacement,Cartridge filter 2.5\" x 40\" of RO plant with the same make and type / model number to match with existing complete all as specified and directed by Engineer-in-charge. |
| 54 | Supply only for replacement of Membrane 4” x 40” of RO plant with same make and type/model number (Model No CPA2- 4040 Make: DOE / Hydronautics.) complete all as specified and as directed |
| 55 | Supply only for replacement of Membrane 8” x 40” RO plant with same make and type/model number (Model No CPA2- 8040 Make: DOE / Hydronautics.) complete all as specified and as directed |
| 56 | Supply only for replacement of Membrane 2” x 10”RO plant with same make and type/model number(Model No. CPA2- 4040 Make: DOE / Hydronautics.) complete all as specified and as directed |
| 57 | Supply only rubber pneumatics tube,house conforming to IS-446187,type 2 of size 1.50\"Make :- Indo or techno commercial equivalent |
| 58 | Supply only for replacement of Mild Steel Pressure gauge 0-7 kg per square centimeter rating including connection and testing complete all as specified and as directed. |
| 59 | Supply only for replacement of Multi-Port Valve, made of ABS material Valve Size: 1.5 To 2 Inch, minimum pressure value 4 Kg/cm2 suitable for RO system including connection and testing complete all as specified and as directed. Make: Midas or equivalent. |
| 60 | Supply only for replacement of electronic panel mounted Ph meter, LED display Ph Range 0 to 14 , ABS weather proof IP- 65, Accuracy +- 2% FSD, Ph Electrode made of Glass bulb with epoxy body Pressure Range 5 Kg/Cm2 Individual high & low relay, suitable for RO system including connection and testing complete all as specified and as directed. Make: Aster Model No. PO-650 or equivalent. |
| 61 | Supply only for replacement ofPressure Switch, Operating Differential Pressure range 0.7 to 4 Bar suitable for RO system including connection and testing complete all as specified and as directed. Make: Danfoss KP-35 or equivalent. |
| 62 | Supply only for replacement of Ball valve size 40/50mm made of UPVC material. Make : Astral or equivalent. |
| 63 | Supply only for replacement of ELBOW 90 degree size 40/50mm made of UPVC material. Make : Astral or equivalent. |
| 64 | Supply only for replacement of Coupler/ Socket size 40/50mm made of UPVC material. Make : Astral or equivalent. |
| 65 | Supply only for replacement of Union size 40/50mm made of UPVC material. Make : Astral or equivalent. |
| 66 | Supply only for replacement of UPVC Pipe size 40/50mm. Make : Astral or equivalent. |
| 67 | Supply only for replacement of 20-inch length 5 Micron Filter Bag of RO plant with the same type to match with existing complete all as specified and as directed . |
| 68 | Supply & Fix in replacement of Power Contactors 415V AC (3 Pole) Auxiliary Contacts :1 NO or 1 NC suitable for Electric Panel of RO plant complete all as specified and as directed . Make :L&T Model MNX 9 or equivalent. |
| 69 | Supply & Fix in replacement of Phase Sequence Relay Output response time - 100 msec, power on delay - 100 msec, Supply Voltage - 280 to 528 VAC suitable for Panel of RO plant complete all as specified and as directed . Make :Mistura Model - PSR100 or equivalent. |
| 70 | Supply only for replacement of Stainless steel gate valve suitable size for 25mm bore pipe.(as per existing make & model) etc complete all as specified and as directed |
| 71 | Supply only for replacement ofStainless steel gate valve suitable size for 20mm bore pipe.(as per existing make & model) etc complete all as specified and as directed |
| 72 | Supply only for replacement of Dozing pump having capacity 0 to 6 LPH suiatble for RO plant etc complete all as specified and as directedMake : Pro Aquo Model No IMP-64 or equivalent as approved by GE |
| 73 | Supply only for replacement of Rotameter having capacity 9000 LPH suiatble for RO plant etc complete all as specified and as directedMake : Aster or equivalent as approved by GE |
| 74 | Supply only for replacement of Rotameter having capacity 3000 LPH suiatble for RO plant etc complete all as specified and as directedMake : Aster or equivalent as approved by GE |
| 75 | Supply only for replacement of Rotameter having capacity 250 LPH suiatble for RO plant etc complete all as specified and as directed |
| 76 | M&L for carrying out repairs and rewinding to 5.5 HP capacity Sumo Pump set of RO System with motor 3 phase 415 Volt of any make with super enameled copper winding wire of appropriate gauge, insulation and varnishing with \"E\" class varnish including replacement of water seal, dismantling existing motor from existing structure after disconnecting electric connection transporting the same at work shop for repair and back at site after repair, reassembling with pump, commissioning and testing etc complete all as directed. |
| 77 | S&F in replacement of Automatic RO Control Panel, Complete RO Logic Preprogrammed, Auto/ Manual Facility complete all including testing,commissioning and installing etc complete all as directed. |
| 78 | Supply only for replacement of Special chlorine sterlising liquid NAOCL 100 GPL active chlorine confirmingIS-11673 in PVC container of 35/50 ltrs of branded company complete all as specified and directed by Engineer-in-charge. |
| 79 | Supply only Membrane cleaner solution 11 No. |
| 80 | Supply only Membrane cleaner solution 22 No. |
| 81 | Supply only Membrane cleaner solution 33 No. |
| 82 | Supply only Membrane cleaner solution 44 No. |
| 83 | Supply only anti scalant solution in container. |
| 84 | Supply only Alum |
| 85 | Supply only activated carbon 900 IV |
AI Tender Summary
Tender Timeline
Dec 03, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 10, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender