|
| 1 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface ofthewallscompleteincludingdisposalof rubbish to the dumping ground within 50m lead. |
| 2 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead |
| 3 | of area 3sq.m and below |
| 4 | Removing and refixing of doors/ window shutters paneled or paneled and glazed including replacing of existing hinges chiseling etc complete as directed by Engineer -in -charge. |
| 5 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm |
| 6 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cementslurryincludingrubblingcomplete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00 |
| 7 | Solid PVC door frame in plain colour : Providing and fixing factory made polyviny1 chloride (PVC) Door Frame of make Rajshri Plastiwood or equivalent in plain colour manufactured of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm PVC sheet, meter cut at two corners and joined with 2 nos. of 150mm long brackets of 15mm x 15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mm x19mm M.S. Square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 nos. for horizontal member etc. complete as per manufactures\"s specification and direction of Engineer-in-Charge. |
| 8 | Solid core PVC moulded door in plain colour Providing and fixing 35mm thick factory made Moulded door shutter of make Rajshri Plastiwood or equivalent consisting of solid core single leaf Flush Door of 30mm thickness, lipped with 15mm (5mm x 3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet with 2,4, 6 raised panel design in different plain colours on one side after routing the Moulded design on flush door & 2mm plain PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc. complete as per direction of Engineer-in-charge, manufacturer\"sspecification and drawing. |
| 9 | Providing and fixing coloured ceramic tiles spartek or equivalent of 8\" x 8\" size and 6 mm thick in floors thread of steps and landing on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 10 | Providing and fixing coloured ceramic tiles spartek or equivalent of 8\" x 8\" size and 6 mm thick in skirting and dados on 12 thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 11 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 12 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 13 | White washing with lime on old work (two or more coats) give an even shade |
| 14 | Supplying and fixing glass panes with wooden fillets including removal of broken glass panes and old wooden fillet wherever necessary but excluding the cost of wooden fillet. |
| 15 | Glass panes 2mm thick. |
| 16 | Providing and layin ceremic tiles 12\"x12\" floors treads of steps landing with adhesive including filling the joints with required pigment etc. complete as directed by the engineer- in-charge. |
| 17 | Dismantling old plaster or skirting raking out jointsand cleaning the surface forplaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 18 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 19 | Providing and fixing flush doors shutters commercial type, core of block construction with frame of first class hard wood and well matched commercial ply venerringand vertical grains or cross bands and face veneers on the both other faces of shutters. |
| 20 | 25mm thick (for cupboard) including nickle plated bright finished M.S. piano hinges with necessary screws |
| 21 | Finishing wall with superior quality waterproofing cement paint (super snow hem or equivalent) of required shade on old work (three or more coats) to give an even shade. |
| 22 | Providing and fixing coloured ceramic tiles spartek or equivalent of 12 \" x 12\" (399x150 mm cut size) 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 23 | Painting oneor morecoats withsuperior qualityreadymixedpaintofsteelworkof approved brand & manufacture in all shades on old work to give an even shade. |
| 24 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 25 | Painting oneor morecoats withsuperior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade. |
| 26 | Varnishing with (1 more coats) with copal varnish of approved brand & manufacture on old work. |
| 27 | Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approvedmunicipaldesignandnylonpull complete cutting and making good the walls and floors where required. |
| 28 | Long pan pattern W. C. Pan |
| 29 | Providing and & fixing white vitreous china wash basin including making all connection but excluding the cost of fittings : |
| 30 | Flat back wash basin of size 630 x 450 mm |
| 31 | Providing & fixing kitchen sink including making all connections excluding cost of fittings. |
| 32 | White vitreous china sink size 600 x 450 x 200 mm |
| 33 | Supplying ofASTMUPVC pipe conformingto ASTM 2467 with ISO 14001 etc. complete |
| 34 | SCH -80( Blue)/(White) |
| 35 | 20 mm |
| 36 | 25 mm |
| 37 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. |
| 38 | 500 lit. capacity |
| 39 | Providing and fixing brass bib cock (heavy) of approved quality : |
| 40 | 15 mm nominal bore |
| 41 | Providing and fixing brass stop cock (heavy) of approved quality : |
| 42 | 15 mm nominal bore |
| 43 | Providing and fixing brass fullway valve (heavy) duty with wheel of approved quality. |
| 44 | 20mm nominal bore |
| 45 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: |
| 46 | 30 cm (12”) length . |
| 47 | Providing and fixing C.P. brass waste for wash basin and sinks: |
| 48 | 32 mm dia |
| 49 | Providing and fixing C.P. brass or M.I trap for wash basin and sinks: |
| 50 | 32 mm dia |
| 51 | Providing and fixing ballvalve(brass) of approved quality : |
| 52 | High pressure with P.V.C. floats: |
| 53 | 15 mm nominal bore |
| 54 | Providing and fixing C.P. brass shower rose with 15 or 20 min inlet |
| 55 | 100 mm diameter |
| 56 | Providing and fixing anodised aluminium sliding door bolt anodised transparent or dyed required colour and shade with bolts, nuts and screws etc. complete: |
| 57 | 250 x 16 mm |
| 58 | Providing and fixing anodised aluminium flat latch |
| 59 | 200 mm |
| 60 | Steel work in single sections including cutting, hoisting fixing in position and applying a priming coat of red lead paint. |
| 61 | In R.S. joists, channels, angles, tees |
| 62 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 63 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 64 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 65 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 66 | Earthworkinexcavationbymechanicalmeans (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m. |
| 67 | All kinds of soil |
| 68 | Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5\" 82.5\"810 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 metres centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 metres minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer - in - charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately) |
| 69 | Rubble packing with hard laterite stone under floorsincluding watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 70 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basalticstoneaggrt.20mm.nominalsize) excluding cost of centering, shuttering and finishing in: |
| 71 | All works upto plinth level |
| 72 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basalticstoneaggrt.20mm.nominalsize) excluding cost of centering, shuttering and finishing in: |
| 73 | All works upto plinth level |
| 74 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 75 | 20mm cement plaster 1 : 4 (1 cement : 4 fine sand) |
| 76 | Providing and laying factory made Shot blasted cementconcreteinterlockingpaverblockof minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc.allcompleteasperthedirectionof Engineer.- in I, Wave, Rectangular, Square etc. shapes.TheproductsshouldcomplytoIS 15658:2006andmanfucaturedbyISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. |
| 77 | 60 mm thick in Grey colour (M35 grade) |
