Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-11-2021 | namecorrection | Technical Bid | 18-11-2021 |
| Sl. No. | Item Description |
| 1 | DECORATIVE BASALT STONE WORK |
| 2 | Providing and Construction of matt finishedNevasa Basalt Stone wall cladding in rectangular shape with machine cut edge and champher finish toward inner side top surface of stone should be hand chiseld and base should be rogh of make \"Polygon Hardscape or Equivalent\" , 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. (Lead and lift up to 10 m) |
| 3 | Providing and Construction of Butte Finished Basalt Stone for wall cladding rectangular in shape with edges of stone hand cut and champher finished towards inner side, top surface to be rock surfaced and base to be rough of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 150 to 200 mm thick, Rough Tooled, Butte Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. (Lead and lift up to 3 m) |
| 4 | Providing and Construction of Butte finished Basalt Stone for wall coping in hard basalt stone in rectangular shape with edges of stone should be hand cut and inner side of stone champher finished, top surface should be rockgace and hand chiseled and rough base of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 150 to 200 mm thick, Rough Tooled, Butte Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. (Lead and lift up to 3 m) |
| 5 | Providing and Construction of Basalt Stone Tile Flooring, edges of stone should be hand dressed and rectagular in shape of make \"Polygon Hardscape or Equivalent\", 15 to 20 mm thick, Rough Tooled, Machine Cut Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 6 | Providing and Construction of Basalt Stone Tile Flooring coping, edges of stone should be hand dressed and rectagular in shape of make \"Polygon Hardscape or Equivalent\", 15 to 20 mm thick, Rough Tooled, Machine Cut Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 7 | Providing and Construction of Basalt Stone for parapet coping in Hard Basalt Stone rectangular shape Quoins stone of size 12\" by 9\" by 3\" with top triangular in shape, hand cut with allsurfaces to be rockface and hand chisled of make \"Polygon Hardscape or Equivalent\" for Parapet Stone, 75 mm thick, Rough Tooled, Butte Finish set in cement mortar (1:3), as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 8 | Providing and Construction of 10.5 feet Deepmaal in Basalt Stone of make \"Polygon Hardscape or Equivalent\", with base size 4\" by 4\" and height 10.5\", set in cement mortar (1:3), as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 9 | Providing and Construction of Basalt Stone Cornice of size 18 inch, as per the design approved by Architect. Includes leads and lift for installation at height of upto 40 feet in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 18 inch thick, Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 10 | Providing and Construction of Basalt Stone Corbel of size 300 mm height and 90 mm width as per the design approved by Architect, in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 300 mm height, Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 11 | Providing and Construction of Basalt Stone Ledge of size 600 mm Length and 75 mm thick out of which 150 mm should be inserted in wall, as per the design approved by Architect. in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 600 mm Lenght (out of this 150 mm will be inserted in wall), Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 12 | Providing and Construction of Basalt Stone Name Plate Carving in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 3\" by 4\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge and architectural drawings. |
| 13 | Providing and Construction of Basalt Stone Devali to be constructed in masonry, installed at a ht of 1.5m , as per design approved by Architect, in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 15\" by 21\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 14 | Providing and Construction of Basalt Stone Devali (small). Devali to be constructed in carved single Stones, installed at a ht of 7m as per design approved by Architect, in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 15\" by 21\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 15 | Providing and Construction of Basalt Stone Masonry in Nevasa Basalt Stone. Nevasa Basalt Stone Steps, rectangular in shape consisting of 1.5 ft risers and 2 ft tread with edges of stone machine cut and champher finish towards the inner side, top surface to be plain and finely hand chisled and base to be rough, of make \"Polygon Hardscape or Equivalent\" for Steps, 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 16 | Providing and Construction of Ashlar Basalt Stone Masonry in Nevasa Basalt Stone. Nevasa Basalt Stone Steps, rectangular in shape consisting of 6\" risers and 12\" tread with edges of stone machine cut and champher finish towards the inner side, top surface to be plain and finely hand chisled and base to be rough, of make \"Polygon Hardscape or Equivalent\" for Steps, 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 17 | Providing and Construction of Basalt Stone Masonry in Nevasa Basalt Stone Arch to be constructed incarved stones, installed at a ht of 9m, as per design approved by Architect, of make \"Polygon Hardscape\" for Arch, 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 18 | Providing and Construction of Basalt Stone Masonry in Nevasa Basalt Stone Arch to be constructed in masonry stones, as per design approved by Architect, of make \"Polygon Hardscape or Equivalent\" for Arch, 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 19 | PLANTATION WORK |
| 20 | Drain cell with gio fabric : Providing, laying and Fixing of 30 mm thick drain cells with 150 gsm gio fabric made from PP compressive strength 100t/sqm as filter media achieving a clean finished given level, etc. |
| 21 | Trees transplanting : Excavation for Transplanting Trees on soft surface: Excavating the ground in the Concrete/ masonry/ asphalt/ hard rock for transplanting the tree to the desired location, with required machinery. Tree to be lifted with roots & replaced in fresh soil. Making trench at suitable distance away from the stem based on age of the plant in a circular fashion to a sufficient depth to remove the ball of earth & applying fungicide on cut portion. |
| 22 | IRRIGATION WORK |
| 23 | PVC Ball Valve 1.25\" |
| 24 | 3/4\"QuickCouplingValve(QCV)ofsolidbrass construction with sutieble MSService Saddle, G.I.Riser Pipe and 6\" Valve box |
| 25 | 3/4\" QCV Key with hose swivel Elbow arrangement of solidbrass construction |
| 26 | Providing and installing 1 \" Air valve assembly Harit / Ivc make with M.S.Service Saddle,GI Riser, including all necessary materials and labour if any etc.complete. |
| 27 | Providing and installing 3/4\" Vaccum breaker assembly with PP saddle , GI riser & all fittings with labour etc . CompleteMake - Harit / Local |
| 28 | Subsurface Inline Polytube 16 mm 2.1 LPH discharge 30 cm c/c distance |
| 29 | Borewell Type Submersible Pumps3 HP Duty :- Head 37 to 40 mtr. Discharge 180 LPM MakeDeecan/ Kirloskar / KSB |
| 30 | Outdoor type control panel for 3 HP3ph pump withAmmeter,Voltmeter,O/L Relay, contactors, MCB, Single phasing preventor, Push buttons, Indicator lamps, Low level water cutoff sensors, etc complete |
| 31 | Submersible flat cable Finolex/Polycab ,2.5 sq.mmx 3core |
| 32 | CI Non return valves Normax make 2\" Normaxmake |
| 33 | Hydraulic Pressure Relief Valve 2\" |
| 34 | WATER BODY MECHANISM |
| 35 | 2D Multi Directional Controllable Nozzle Small @ xmeters (Assembled Unit with following Accessories from 1.01 - 1.12)Technical Features:· Movement Ranges: Maximum pivot range minimum 90 degrees Maximum 140 degrees on both X and Y axis with numerous motion capacity.· Angular moment by special sensor. Servo drive control on two axis.· Energy Efficient 24V DC motors.· Controllable with DMX MOC: All Stainless Steel Construction.· Outlet Connection:11/2\"or 2\" BSP/NPT· Make: Deep / LI/ AT, Medium Straight Jet spray Nozzle· Make: Deep / LI/ AT, DMX Variable Submersible Pump Large· Make: Deep / Ose / AT, LED RGB Underwater Spotlights Module DMX for 2D Nozzle· Make: Deep / LI / AT, AES/EBU Kabel BINARY 234 / sw / 2x0.34mm· Make: LI / Lapp / Sommer, Connection cable 24 V DC / 7,501· Make: Deep / LI / AT, Connection cable DMX / 1,001· Make: Deep / LI / AT, Connection cable DMX / 5,001· Make: Deep / Oase / AT,End resistant for BUS-system DMX/01· Make: Deep / LI / AT, DMX Distance Piece· Make: Deep / LI / AT, Power Splice 22· Make: Deep / LI / AT, Power Splice 43· Make: Deep / LI / AT, Underwater power supply 24 V· Make: Deep / LI / AT. |
| 36 | Rubber-Sheathed-Cable H07RN-F 3x1.5mm2· Make: Lapp/ Finolex |
| 37 | Rubber-Sheathed-Cable H07RN-F 3x6mm2· Make: Lapp / Finolex |
| 38 | Variable Pump with Straight Jet Nozzle @ x meters(Assembled Unit with following Accessories from2.01 - 2.16), DMX Variable Submersible Pump Medium· Make: Groundfos / Ose / AT, Medium Straight Jet spray Nozzle· Make: Deep / LI / AT, LED RGB Underwater Spotlight DMX for Straight Jet Nozzle· Make: Deep / LI / AT, Lamp Holder Single· Make: Deep / LI / AT, AES/EBU Kabel BINARY 234 / sw / 2x0.34mm· Make: LI / Lapp / Sommer, Connection cable 24 V DC / 7,501· Make: Deep / LI / AT, Connection cable DMX / 1,001· Make: Deep / LI / AT, Connection cable DMX / 1,501· Make: Deep / LI / AT, Connection cable DMX / 10,001· Make: Deep / LI / AT, End resistant for BUS-system DMX/01· Make: Deep / LI / AT, DMX Distance Piece· Make: Deep / LI / AT, Extension cable hybrid / 3,0· Make: Deep / LI / AT, Power Splice 22· Make: Deep / LI / AT, Power Splice 43· Make: Deep / LI / AT, LED Underwater Driver Compact /DMX/02· Make: Deep / LI / AT, Underwater power supply 24 V· Make: Deep / LI / AT. |
| 39 | Rubber-Sheathed-Cable H07RN-F 3x1.5mm2· Make: Lapp/ Finolex |
| 40 | Rubber-Sheathed-Cable H07RN-F 3x2.5mm2· Make: Lapp/ Finolex |
| 41 | Variable Pattern Nozzle @ x meters (Assembled Unit with following Accessories from 3.01 - 3.17), DMX Variable Submersible Pump Large· Make: Groundfos / Ose / AT, Variable Pattern Nozzle L· Make: Deep / LI / AT, LED RGB Underwater Spotlights Module DMX for Straight Jet Nozzle· Make: Deep / LI / AT, Lamp Holder for Variable Pattern Nozzle LLamp Holder Single· Make: Deep / LI / AT, Pump Console (SN3)· Make: Deep / LI / AT, AES/EBU Kabel BINARY 234 / sw / 2x0.34mm· Make: LI / Lapp / Sommer, Connection cable 24 V DC / 7,501· Make: Deep / LI / AT, Connection cable DMX / 1,001· Make: Deep / LI / AT, Connection cable DMX / 3,001· Make: Deep / LI / AT, Connection cable DMX / 5,001· Make: Deep / LI / AT, End resistant for BUS-system DMX/01· Make: Deep / LI / AT, DMX Distance Piece· Make: Deep / LI / AT, Extension cable hybrid / 3,0· Make: Deep / LI / AT, Power Splice 22· Make: Deep / LI / AT, Power Splice 43· Make: Deep / LI / AT, LED Underwater Driver Compact /DMX/02· Make: Deep / LI / AT, Underwater power supply 24 V· Make: Deep / LI / AT. |
| 42 | Rubber-Sheathed-Cable H07RN-F 3x1.5mm2· Make: Lapp/ Finolex |
| 43 | Rubber-Sheathed-Cable H07RN-F 3x6mm2· Make: Lapp/ Finolex |
| 44 | Rotating Nozzle @ x meters (Assembled Unit withfollowing Accessories from 4.01 - 4.14), Multi Stage Submersible Motor Driven Pump· Make: Goundfos / Pluga / Lubi, Rotating Nozzle L· Make: Deep / LI / AT, LED RGB Underwater Spotlights Module DMX for Rotating Nozzle· Make: Deep / LI / AT, Customized Light support· Make: Deep / LI / AT, AES/EBU Kabel BINARY 234 / sw / 2x0.34mm· Make: LI / Lapp / Sommer, Connection cable 24 V DC / 7,501· Make: Deep / LI / AT, Connection Cable DMX/5,001· Make: Deep / LI / AT, End resistant for BUS-system DMX/01· Make: Deep / LI / AT, Extension cable hybrid / 3,0· Make: Deep / LI / AT, Extension cable hybrid / 7,5· Make: Deep / LI / AT, Power Splice 22· Make: Deep / LI / AT, Power Splice 43· Make: Deep / LI / AT, LED Underwater Driver Compact /DMX/02· Make: Deep / LI / AT, Underwater power supply 24 V· Make: Deep / LI / AT. |
| 45 | Rubber-Sheathed-Cable H07RN-F 3x1.5mm2· Make: Lapp/ Finolex |
| 46 | Rubber-Sheathed-Cable H07RN-F 4x2.5mm2· Make: Lapp/ Finolex |
| 47 | High Jet Nozzle @ x meters (Assembled Unit withfollowing Accessories from 5.01 - 5.13), Multi Stage Submersible Motor Driven Pump· Make: Goundfos / Pluga / Lubi, High Jet Nozzle· Make: Deep / LI / AT, LED RGB Underwater Spotlights Module DMX for · Make: Deep / LI / AT, Customized Light Support (Simple version)· Make: Deep / LI / AT, AES/EBU Kabel BINARY 234 / sw / 2x0.34mm· Make: LI / Lapp / Sommer, Connection cable 24 V DC / 1,501· Make: Deep / LI / AT, Connection cable DMX / 1,501· Make: Deep / LI / AT, End resistant for BUS-system DMX / 01· Make: Deep / LI / AT, Extension cable hybrid / 3,0· Make: Deep / LI / AT, Power Splice 22· Make: Deep / LI / AT, Power Splice 43· Make: Deep / LI / AT, LED Underwater Driver Compact /DMX/02· Make: Deep / LI / AT, Underwater power supply 24 V· Make: Deep / LI / AT. |
| 48 | Rubber-Sheathed-Cable H07RN-F 3x1.5mm2· Make: Lapp/ Finolex |
| 49 | Rubber-Sheathed-Cable H07RN-F 4x6mm2· Make: Lapp/ Finolex |
| 50 | DMX show ControllerTechnical Features:· Freely programmable inputs and outputs.· For controlling, shows, wind anemometers, water level sensor, protections etc. .· Entertainment server standalone.· Protection class IP20· Power supply 15.24V DC/8W.· Outputs DMX – 1024 DMX channels standalone.· Outputs – 8 X Digital output (Clamps 24 V DC / 1A max., optically isolated)· Inputs – 8 X Digital In (Clamps 24 V DC , optically isolated)· Other connections – Ethernet RJ45 10 / 100Mbit.· Memory – Micro SD –Card for Show Files.· Software – Windows 7 or better.· Make: Deep / Oase / AT. |
| 51 | Fog Module 70bar professional.· Make: CSC. |
| 52 | Audio System and Following Hardware· Make: CSC, Contrabass:· Make: CSC, Amplifier:.· Make: CSC, Amplifier:· Make: CSC, Amplifier:· Make: CSC, Audio Loudspeaker:· Make: CSC, Flying Locks:· Make: CSC |
| 53 | Plumbing with fittings in UPVC as per standard for pipes : ASTM D-1785 and for fittings : ASTM D- 2466 and various control valves. |
| 54 | Combo Filter - Inground Sand Filter, with Chlorine inbuilt Doser and auto inbuilt Control Panel· Make: Emaux |
| 55 | Design, Intallation, Programming, Testing and Commissioning |
| 56 | ELECTRICAL CABLE WORK |
| 57 | 3 C X 2.5 SQ.MM. Cu conductor PVC insulated PVC sheathed FRLS cable ( For flexible cables, use PG Type Plastic Waterproof Nylon Cable glands, IP 68.) |
| 58 | Supply, Installation, Testing and Commissioning of 8 Way 7 Segment DB |
| 59 | MAIN PANEL ( Total Connected Load - 200 KW / 250 KVA )Supply, Installation, Testing & commissioning of PCC Panel with 125 KVAR APFC Panel as follows :-Incomer - 400 A, FP MCCB with Earth fault & short circuit relay. Outgoings - 32 Amps FP MCB Feeder - 12 Nos. 125 Amps MCCB Feeder - 1 Nos for Boat. 250 Amps MCCB Feeder - 2 Nos. for Musical Fountain. 250 Amps MCCB Feeder - 1 No for APFC Panel. APFC Panel for 125 KVAR with APFC Relay. Note :- This Panel is Indoor Type and will be kept in the Room near Main Entrance. The Room will have constructed cable trench. |
| 60 | 2Mx1M wide 10 mm thick ISI mark 1100V grade rubber mat |
| 61 | First Aid Box |
| 62 | 415V 150mm x 150mm enamel type danger board |
| 63 | Drawing display board suitable for A2 size with As built drawing laminated. |
| 64 | No Admission board |
| 65 | ELECTRICAL LIGHT FITTINGS |
| 66 | Recessed Wall Light : (Size-82 L X 82 H X 73 D mm)Luminaires Body Housing High-pressure Die Cast Aluminium alloy body and components. Coating Process Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. Diffuser Impact resistant safety tempered glass cover.Gasket Weather resistant silicone gasket. External screws External screws are in stainless steel with protection grease. Cable Entry Cable entry protected by weather proof grommet.Specifications- LED Light, Unit Watage - 2, CRI/ UGR - CRI 80, Lumen - 240, Colour tempt - 3000K, Beam Angle - Asymmetrical, Control type - Remote On/Off |
| 67 | Exterior Recessed-Bult-In :(Size-14.5 L X 18.5 H mm)IP67 flexible dot free linear LED light line. Opal polyurethane encapsulation offering a premium water proof sealing, UV resistance, chemical stability against urban gazes and protection against abrasion. IP67 ingress. Light source assembled Reel to Reel (R2R) production process. Prefer Tj Away® thin flexible circuit board technology.In combination with ceramic LED packages a thermal resistivity of 45.5 K/W is required for an optimal heat dissipation. 24 Volt System, Top View Specifications- LED Light, Unit Watage - 10, CRI/ UGR - CRI 80, Lumen - 290 Lm/M, Colour tempt - 3000K, Beam Angle - Diffuse, Control type - Remote On/Off |
| 68 | Exterior Recessed-Bult-In :(Size-14.5 L X 18.5 H mm)IP67 flexible dot free linear LED light line. Opal polyurethane encapsulation offering a premium water proof sealing, UV resistance, chemical stability against urban gazes and protection against abrasion. IP67 ingress. Light source assembled Reel to Reel (R2R) production process. Prefer Tj Away® thin flexible circuit board technology.In combination with ceramic LED packages a thermal resistivity of 45.5 K/W is required for an optimal heat dissipation. 24 Volt System, Side BendSpecifications- LED Light, Unit Watage - 6, CRI/ UGR - CRI 80, Lumen - 170 Lm/M, Colour tempt - 3000K, Beam Angle - Diffuse, Control type - Remote On/Off |
| 69 | Exterior Pole Mounted Light : 5 meter Tall round Wooden Pole Finihs round, 4.5 Meter height with 100mm diameter, Pole should have Cable Junction Box at height of 800mm. At the 4 meter height Pole should have cable Exist with Ip 65 Gland.Specifications- LED Light, Unit Watage - 50X3 = 150, CRI/ UGR - CRI 80, Colour tempt - 3000K, Beam Angle - 60° , Control type - Remote On/Off |
| 70 | Exterior Pole Mounted Light :(Size - 315 W X 355 H mm) Wooden Pole Finihs round, 4.5 Meter height with 100mm diameter, Pole should have Cable Junction Box at height of 800mm. At the 4 meter height Pole should have cable Exist with Ip 65 Gland. Pole mounted luminaire Housing made of aluminium Surface natural anodised Cover of polyacrylic glass (PMMA), frosted Elec. equip.: 1xE27 socket for LED lamps Without lamp (LED Classic E27) Ingress protection (light room) IP54 , Protection rating , Bracket made of cast aluminium, Fitting inclined (12°), Connection: 3 x 2,5 mm² inside the luminaireSpecifications- LED Light, Unit Watage - 40 Watt, CRI/ UGR - CRI 80, Lumen - 3760, Colour tempt - 3000k, Beam Angle - Diffuse, Control type - Remote On/Off |
| 71 | Surface Floor :(Size - Dia - 120 mm) Spotlight designed to use LED lamps and a Wide Flood optic. aluminium alloyThe following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. 5 mm thick tempered sodium-calcium closing glass. Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane. Complete with a monochrome LED circuit and an Opti Beam Reflector optic system. The product includes a PG13.5 cable gland. Electronicballast integrated in product. Option of using optic accessories assembled via an accessory holder frame. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 28, CRI/ UGR - CRI 80, Lumen - 2342 lm, Colour tempt - 3000k, Beam Angle - 62°, Control type - Integrated On/Off |
| 72 | Surface Floor light Fixture :(Size - Dai 90 mm)Spotlight designed to use LED lamps and aFlood optic, aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing,Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane. Complete with a monochrome LED circuit . The product includes cable gland. Electronicballast integrated in product.. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 10, CRI/ UGR - CRI 80, Lumen - 481, Colour tempt - 3000k, Beam Angle - 40° , Control type - Integrated On/Off |
| 73 | Surface Floor light Fixture :(Size - Dai 90 mm)Spotlight designed to use LED lamps and aFlood optic, aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing,Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane. Complete with a monochrome LED circuit . The product includes cable gland. Electronicballast integrated in product.. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 10, CRI/ UGR - CRI 80, Lumen - 481, Colour tempt - Blue, Beam Angle - 40° , Control type - Integrated On/Off |
| 74 | Exterior Surface Floor :(Size - 140 L X 436 H mm)LED CLUSTER 13,3W / CRI>80 / 3000K / 1250lm, INCL.DIMMABLE LED POWER SUPPLY 500mA-DC, MAINS DIMMING - TRAILING EDGESpecifications- LED Light, Unit Watage - 13, CRI/ UGR - CRI 80, Lumen - 1250 lm, Colour tempt - 3000k, Beam Angle - Diffuse, Control type - Remote On/Off |
| 75 | Recess Built-In :(Size - 1000 mm L)LED Flexible Direct View LED strip, IP 68For uplighting. Aluminium profile and silicone diffuser included. Structure material: Aluminium. Structure, finish: Matt. Diffuser material: Polycarbonate. Diffuser finish: Transparent.Specifications- LED Light, Unit Watage - 14, CRI/ UGR - CRI 80, Lumen - 1400, Colour tempt - 3000k, Beam Angle - Diffuse, Control type - Remote On/Off |
| 76 | Lamps with innovative LED \"filament\" technology • Design, dimensions, luminous flux comparable to an incandescent or halogen lamp • No UV and near-IR radiation in the light beam • Instant 100 % light, no warm-up time • Can be easily fitted instead of ordinary light bulbs • Lower thermal output (compared with the standard reference product)Specifications- LED Light, Unit Watage - 1, CRI/ UGR - CRI 80, Lumen - 96 lm, Colour tempt - 2700k, Beam Angle - 300°, Control type - Remote On/Off |
| 77 | Surface Ceiling Light : Enterior rated Gobo Projector, Glass Gobo, 22 Watt , CRI 80, 6000K , IP rated Specifications- LED Light, Unit Watage - 22, CRI/ UGR - CRI 80, Lumen - 1800, Colour tempt - 6000k, Beam Angle - wide, Control type - Integrated. |
| 78 | Recessed Ground Light :(Size - 1073 L X 55 W X 74 D)Direct light luminaire, a flood optic with non-slip glass. Ground-, wall recessed. Consists of a body and outer casing for nstallation, . Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following ainting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. ower PPS (polyphenylene sulfide) box for control gear.optical ssembly is closed by an 8 mm thick non-slip glass screen . 24V intelligent driver that ensures light flow emission is constant even when the input voltage varies (from 30V dc to 16V dc).. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 13, CRI/ UGR - CRI 80, Lumen - 1130, Colour tempt - 3000k, Beam Angle - 46°, Control type - Integrated On/Off. |
| 79 | Recessed Ground Light :(Size - Dia 38 mm)Housing Anodized aluminium, Steel, Brushed Steel. Installtion Housing recessed with housing box AISI 316L stainless steel trim, transparent tempered glass and PMMA lens. Housing have provision to carry the maintenance cable Round Shape, 24V DC system Constant voltage 2W - 24Vdc, Specifications- LED Light, Unit Watage - 5, CRI/ UGR - CRI >90, Lumen - Delivered 155 lm, Colour tempt - 3000k, Beam Angle - Narrow 10° Fix, Control type - Remote On/off. |
| 80 | Recessed Ground Light :Recessed luminaire applicable to the floor or ground, designed for fitting monochrome white LED sources, for illumination, adjustable optic. body and frame are made of AISI 304 stainless steel with sodium-calcium extra clear glass, thickness 15 mm. Stainless steel body coated with black paint. The luminaire is secured to the outer casing by means of two TORX-type screws that ensure proper anchoring. Inclusive of LED circuit, methacrylate lens and black plastic cover The luminaire is supplied with an external orientation system (patent pending), without having to open the product, inclusive of double graduated scale: 0-30° The product is wired using an A2 stainless steel cable glandSpecifications- LED Light, Unit Watage - 10, CRI/ UGR - CRI 80, Lumen - Source Lumen 1450 lm, Colour tempt - 3000k, Beam Angle - 35° Adjustable, Control type - Integrated On/ Off. |
| 81 | Recessed Ground Light :Inground round luminaire with a drive over load of 2,5 tonnes / 5500 lbs, Fixture: turning and milling aluminum. Tempered glass diffuser - 15 mm / 0.59” thickness - complete with silicone gasket. Housing box in PVC. Unpolarized. Diffuse and completely homogenous light distribution across the entire surface. Protection against wrong connections. Unpolarized. Diffuse and completely homogenous light distribution across the entire surface.Specifications- LED Light, Unit Watage - 2.3, CRI/ UGR - CRI 93, Lumen - Lamp - 150 lm Delivered 37 lm, Colour tempt - 3000k, Beam Angle - Diffused, Control type - Integrated on/off. |
| 82 | (Size - 132 mm H; dia - 126mm) Surface mounted ceiling Light Wall fixture for outdoor use. For downlighting. Specially designed to conceal all mounting screws. Suitable for installation in marine environments. Structure material: High purity aluminium. Structure finish: White. Diffuser material: Glass. Diffuser finish: TransparentSpecifications- LED Light, Unit Watage - 12, CRI/ UGR - 12 1118 lm, Lumen - 3000k, Colour tempt - Wide Beam, Beam Angle - Integrated, Control type - IP 68 connector housing. |
| 83 | Surface Ceiling Light : (Size - 193 H X 145 W X ø83 front X ø120 Base) Spotlight designed to use LED lamps and a Medium optic. The optical assembly and base is made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. 5 mm thick tempered sodium-calcium closing glass. Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane.Specifications- LED Light, Unit Watage - 1, CRI/ UGR - CRI 80, Lumen - 1450 LM, Colour tempt - 3000k, Beam Angle - Adjustable 26°, Control type - Remote On/ Off. |
| 84 | Surface Ceiling Light in-ground driveover LED up- light with a height of only 35mm, designed for optical excellence and engineered for complete resilience. Caliber 25 XS offers a choice of four colour temperatures as standardand delivers 90CRI for excellent colour rendering, and with binning-free LEDsSpecificationsLED Light, Unit Watage - 1, CRI/ UGR - 1 W 94 lm, Lumen - 3000k, Colour tempt - Diffuse, Beam Angle - remote, Control type - Housing, Gel connector. |
| 85 | Surface Wall light Spotlight LED For uplighting.. Adjustable light source. Structure material: High purity aluminium. Structure finish: Urban grey. Diffuser material: Polycarbonate. Diffuser finish: Transparent. UV protection.SpecificationsLED Light, Unit Watage - 4, CRI/ UGR - 231 lm, Lumen - 3000k, Beam Angle - 29°. |
| 86 | Surface Wall(Size - 605 mm X 325 mm)Tilting upper square frame made in die-cast aluminum, for access to the wiring compartment. - Bottom frame made in die-cast aluminum with four-armed bracket with flange and a hole (diam. 28 mm) for attachment to the support.Die-cast aluminium (UNI EN 1706). - Stainless steel fasteners.Power LEDs module on printed circuit board with metal core plate. - Estimated life: 80.000 h (L85 - Ta 25°C). - Flux: 2500 lm/3500lm. - Power: 29W/42W, - Efficiency: 92.6 lm/W. Refractive lens in polycarbonate (PC), UV resistant. Shock resistance: IK10 - Lens mod. 02 - Optic system for street lighting. Classes CE-S - (Type III).- Full cut-off classify.SpecificationsLED Light, Unit Watage - 29, CRI/ UGR - 29 4500 lm, Lumen - 3000k, Colour tempt - Raad Optic, Beam Angle - Integrated, Control type - Pate 4.5 Meter. |
| 87 | GRC AND FRP WORK |
| 88 | MEGH DAMBARI - Providing and Making Of fiber Meghdambari of fire retardant resine as per Design of size L 12\"6\"\" x B 12\" 6\"\" HT 18\".The specifications of fr resins material - 1) F R Resin, 2) Hardener, 3) Mention Polish, 4) Acetones, 5) Aerosil Powder, 6) Polish Paper, 7) HP Khara Powder, 8) Binani Matt, 9) Alkon Paper, 10) Cobalt, 11) Brush of Various Sizes, 12) Bucket, 13) Cotton Saree, 14) Pigment, 15) Cutter Blade, 16) ISMC chanel box, 17) FR Dome, Arches, Brackets, cornice and chajja will supported with 30mm and 45mm GI tubes of 14 gaze thickness, 18) ISMC chanel box, 19) Meghdambari will finish with copper metallic color, 20) Maintenance of Meghdambari should be there in all sense up to 1 year, 21) Life of Meghdambarishould be15 years to 20 years if it should be stand as it is without any damaged, 22) Damaged due to Natural calamities and uncertainties of any incidence on site is excluded.Preparation of clay elements and preparation of molds of arches, pillars. Domes and cornices as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof color of approved manufacture. Final colour finishing will done after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 89 | SHIVNERI FORT - Providing and making of fivers stone plate, Pillars, Arch, Cornice, Dados, Roof (Profile sheet roof with MS Perlin) of fire retardant resine with approx 3 to 4 mm thickness as per design.W 35\" x L 50\" x HT 18\"The specifications of fr resins material 1) F R Resin, 2) Hardener, 3) Mention Polish, 4) Acetones, 5) Aerosil Powder, 6) Polish Paper, 7) HP Khara Powder, 8) Binani Matt, 9) Alkon Paper, 10) Cobalt, 11) Brush of Various Sizes, 12) Bucket, 13) Cotton Saree, 14) Pigment, 15) Cutter Blade, 16)Fiber is supportedwith galvanized iron metal45mm x 45mm GI pipe of 14 gauge ISI mark, 17) Duco weather proof colour, 18) fiber stone plate, pillars, Arch, cornice, dados, roof will prepare in workshop and transport on site and fitting on plinth, 19)Maintenance of shivneri Fortshould be there in all sense up to 1 year, 20) Life of Shivnerishould be15 years to 20 years if it should be stand as it is without any damaged, 21) Damaged due to Natural calamities and uncertainties of any incidence on site is excluded.Making of clay elements as per approved design. Preparation of respective molds. And casting of pieces in fr resins. Fiber pieces were joints with each other by glass fiber. GI metal skeleton is erected with support of ISMB steel (5\"x2.5\"). Pre colored fiber peace’s clade on metal tube (1.5\" x 1.5\" of 14 gauge ) skeleton. And finishing on site. |
| 90 | RAIGAD FORT - Making of fiber stone plate, pillars, arch, cornice, dados, roof (profile sheet roof with MS Perlin) of fire retardant resin.[ fr ].as per designs with approx 3 to 4 mm thickness. The specifications of fr resins - 1) F R Resin, 2) Hardener, 3) Mention Polish, 4) Acetones, 5) Aerosil Powder, 6) Polish Paper, 7) HP Khara Powder, 8) Binani Matt, 9) Alkon Paper, 10) Cobalt, 11) Brush of Various Sizes, 12) Bucket, 13) Cotton Saree, 14) Pigment, 15) Cutter Blade, 16) Fiber is supported with galvanized iron metal 45mm x 45mm GI pipe of 14 gauge ISI mark, 17) Duco weather proof colour, 18) Fiber stone plate, pillars, arch, cornice, dados, roof will prepare in workshop and transport on site and fitting on plinth, 19 ) Maintenance of Raigad Fortshould be there in all sense up to 1 year, 20) Life of Raigad Fortshould be15 years to 20 years if it should be stand as it is without any damaged, 21) Damaged due to Natural calamities and uncertainties of any incidence on site is excluded. Preparation of clay elements and preparation of molds of arches, pillars. Stone plates. And cornices as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof color of approved manufacture. Final color finishing will do after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 91 | BHAVANI TEMPLE - Making of fiber stone plate, pillars, arch, cornice, dados, roof (profile sheet roof with MS Perlin) of fire retardant resine. [ fr ] As per designs with approx. 3 to 4 mm thickness. The specifications of fr resins -the specifications of fr resins - 1)fr resin, 2)hardener, 3)mention polish, 4)acetones, 5)aerosil powder, 6)polish paper, 7)hp khara powder, 8)binani matt, 9)alkon paper, 10)cobalt, 11)brush of various sizes, 12)bucket, 13)cotton saree, 14)pigment, 15)cutter blade, 16)fiber is supportedwith galvanized iron metal45mm x 45mm Gi pipe of 14 gauge ISI mark, 17) duco weather proof colour, 18) fiber stone plate, pillars, arch, cornice, dados, roof will prepare in workshop and transport on site and fitting on plinth, 19 )maitenance of bhavani templeshould be there in all sense up to 1 year, 20 ) life of bhavani templeshould be15 years to 20 years if it should be stand as it is without any damaged, 21 ) damaged due to natural calamities and uncertainties of any incidence on site is excluded. Preparation of clay elements and preparation of molds of arches, pillars. Stone plates. And cornices and Shikhar (dome) as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof colour of approved manufacture. Final colour finishing will done after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 92 | ROHIDESHWAR -Making of fiber stone plate, pillars, arch, cornice, dados, roof (profile sheet roof with MS Perlin) of fire retardant resine.[ fr ].as per designs with approx. 3 to 4 mm thickness.The specifications of fr resins -1 ) f r resin, 2 ) hardener, 3 ) mention polish, 4 ) acetones, 5 ) aerosil powder, 6 ) polish paper, 7 ) hp khara powder, 8 ) binani matt, 9 ) alkon paper, 10 ) cobalt, 11 ) brush of various sizes, 12 ) bucket, 13 ) cotton saree, 14 ) pigment, 15 ) cutter blade, 16 )fiber is supportedwith galvanized iron metal45mm x 45mm GI pipe of 14 gauge ISI mark, 17 )duco weather proof colour, 18) fiber stone plate, pillars, arch, cornice, dados, roof will prepare in workshop and transport on site and fitting on plinth, 19) Maintenance of Rohideshwar should be there in all sense up to 1 year, 20 ) life of Rohideshwarshould be15 years to 20 years if it should be stand as it is without any damaged, 21 ) damaged due to natural calamities and uncertainties of any incidence on site is excluded. Preparation of clay elements and preparation of molds of arches, pillars. Stone plates. And cornices and Shikhar (dome) as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof colour of approved manufacture. Final colour finishing will done after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 93 | Dummy Boat - 1) Boat in GRC Cladding. MATERIAL will be used of Weather Proof. Mast is of metal round pipe and sail IS making in standard required quality material and decorated with ropes and other elements 2) Maintenance of Boat should be there in all sense up to 1 year 3) Life of Boat should be 15 years to 20 years if it should be stand as it is without any damaged 4) Damaged due to Natural calamities and uncertainties of any incidence on site is excluded. GRC plates (looking like wooden planks) cladded on metal skeleton. Sail is hanged on round metal pipe. GEFC plates are coloured with exterior paint as per approved shade. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
