Indian Oil Corporation Limited-IOCL has published Oso Engg Design, Supply, Installation, Testing And Commissioning Of Tank Farm Management System For 5 U / G Tanks ( 3 Nos. For Ethanol And 2 Nos. For Bio Diesel ) And Integration With Existing Terminal Automation System And Replacement Of Pl. Submission Date for this Tender is 15-12-2021. Application Software Tenders in Jharsuguda TOP Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Nov-2021 | Corrigendum 1 on Date Extension | Date | 08-12-2021 |
| 2 | 08-Dec-2021 | Corrigendum 2 on Technical Bid and Date Corrigendum | Date | 15-12-2021 |
| Sl. No. | Item Description |
| 1 | TAS WORKS FOR ETHANOL & BIO-DIESEL |
| 2 | AUTOMATION SUPPLY |
| 3 | TLF Header line instruments |
| 4 | Supply of Bulk Air Eliminator as per product line size and flow requirement as per following sizes including mounting structure, foundation etc. complete as per specification and tender document. |
| 5 | ETHANOL-0.6-KL |
| 6 | Supply of flameproof cum weather proof, min SIL 2 certified smart pressure transmitter with display unit & keypad, SS manifold, 1 no. isolation ball valve, Aluminium canopy/sunshade with mounting accessories etc on the TLF main header line complete as per specifications and tender document. (Transmitter will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) (Range 0-15 kg/cm2) |
| 7 | Tank Farm Management System |
| 8 | Supply of minimum SIL 2 certified Non - contact type Radar level gauges with instrument accuracy of +/- 1 mm or better, in built digital display, along with mounting accessories etc complete as per specification and tender document. (Transmitter will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) |
| 9 | For U/G horizontal product tanks (Ethanol - 3 nos. & Bio diesel - 2 nos.) |
| 10 | Supply of multi point temperature averaging sensor with integrated water interface probe (MSTW) along with mounting accessories etc complete as per specification and tender document |
| 11 | For U/G horizontal product tanks (minimum Two No.) |
| 12 | Supply of Density probe along with accessories etc for density measurement of the product in product tanks complete as per specification and tender document. (Transmitter will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) |
| 13 | For U/G horizontal product tanks (minimum One No.) |
| 14 | Supply of Tank Side indicator along with mounting accessories etc complete as per specification and tender document for displaying respective tank inventory data. (TSI will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) |
| 15 | For U/G horizontal product tanks (minimum One No.) |
| 16 | Supply of top mounted minimum SIL2 certified Overfill detector (vibrating fork type) of suitable probe length along with mounting accessories, spool piece of minimum 500mm, proof testing equipment, etc complete as per specification and tender document |
| 17 | For U/G horizontal product tanks (minimum One No.) |
| 18 | Supply of flameproof cum weather proof to IP 65 or better SIL 2 smart pressure transmitter with in built display, SS manifold, isolation valve, Aluminium canopy/ sunshade, other erection material etc as per hook up drawing attached else where in tender complete as per specifications and Tender Document. (Transmitter will have IEC & ATEX certified minimum and any other certification as stated else where in tender). Note:1. Pressure transmitter at suction shall have range from -1 Kg/cm2. 2. Underground tank shall have PT in Pump discharge end only. |
| 19 | Underground tank Discharge Line |
| 20 | Cabling,JB, Earthing: Note: Supply of cables shall be along with accessories like certified double compression cable glands with PVC shrouds, plugs for excess entries, SS 316 engraved tag plate, mounting clamp, SS 316 fasteners , OFC accessories (like 12/24 port LIU, splice trays, loaded adaptor and blank plates, UTP and optical patch cords, pigtails, media converters etc), LAN face plates, conduits, structural steel for mounting of equipments, making RCC trenches with cover wherever required, hume pipes, Aluminium tags, lugs, ferrules, etc. |
| 21 | Supply of FRLS Armoured Copper Power cable as per tender specifications. |
| 22 | 3C x 2.5 sqmm |
| 23 | 12C x 2.5 sqmm |
| 24 | Supply of FRLS Armoured Copper Control cable as per tender specifications. |
| 25 | 2C x 1.5 sqmm |
| 26 | 48C x 1.5 sqmm |
| 27 | Supply of FRLS Armoured Copper Signal cable as per tender specifications. |
| 28 | 1P x 1.5 sqmm |
| 29 | 2P x 1.5 sqmm |
| 30 | 16P x 1.5 sqmm |
| 31 | Supply of 1C x 6 Sq. mm Flexible copper insulated green wirefor earthinginstruments and junction boxes etc complete as per specification and tender document |
| 32 | Supply of Exd/FLP Junction Box (Power/Control/Signal JB) with IP 65 as per specification suitable for hazardous area of zone 1, group IIA/IIB, T3 or better having CCOE/CMRI approval. It shall be complete in all respect. Accessories like certified double compression cable glands with PVC shrouds & plugs for excessentries, SS 316 engraved tag plate, mounting clamp & SS 316 fasteners.Complete as perspecification / tender documents. |
| 33 | 24 way JB |
| 34 | 18 way JB |
| 35 | 6 way JB |
| 36 | 4 way JB |
| 37 | AUTOMATION SERVICE |
| 38 | TLF Header line instruments |
| 39 | Installation, integration, testing and commissioning of Bulk Air Eliminator as per product line size and flow requirement as per following sizes including mounting structure, foundation etc. complete as per specification and tender document. |
| 40 | ETHANOL-0.6-KL |
| 41 | Installation, integration, testing and commissioning of flameproof cum weather proof, min SIL 2 certified smart pressure transmitter with display unit & keypad, SS manifold, 1 no. isolation ball valve, Aluminium canopy/sunshade with mounting accessories etc on the TLF main header line complete as per specifications and tender document. (Transmitter will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) (Range 0-15 kg/cm2) |
| 42 | Tank Farm Management System |
| 43 | Installation, integration, testing and commissioning of minimum SIL 2 certified Non - contact type Radar level gauges with instrument accuracy of +/- 1 mm or better, in built digital display, along with mounting accessories etc complete as per specification and tender document. (Transmitter will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) |
| 44 | For U/G horizontal product tanks |
| 45 | Installation, integration, testing and commissioning of multi point temperature averaging sensor with integrated water interface probe (MSTW) along with mounting accessories etc complete as per specification and tender document |
| 46 | For U/G horizontal product tanks (minimum Two No.) |
| 47 | Installation, integration, testing and commissioning of Density probe along with accessories etc for density measurement of the product in product tanks complete as per specification and tender document. (Transmitter will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) |
| 48 | For U/G horizontal product tanks (minimum One No.) |
| 49 | Installation, integration, testing and commissioning of Tank Side indicator along with mounting accessories etc complete as per specification and tender document for displaying respective tank inventory data. (TSI will have IEC & ATEX certified minimum along with any other certification as stated else where in tender) |
| 50 | For U/G horizontal product tanks |
| 51 | Installation, integration, testing and commissioning of top mounted minimum SIL2 certified Overfill detector (vibrating fork type) of suitable probe length along with mounting accessories, spool piece of minimum 500mm, proof testing equipment, etc complete as per specification and tender document |
| 52 | For U/G horizontal product tanks (minimum One No.) |
| 53 | Installation, integration, testing and commissioning of flameproof cum weather proof to IP 65 or better SIL 2 smart pressure transmitter with in built display, SS manifold, isolation valve, Aluminium canopy/ sunshade, other erection material etc as per hook up drawing attached else where in tender complete as per specifications and Tender Document. (Transmitter will have IEC & ATEX certified minimum and any other certification as stated else where in tender). |
| 54 | Underground tank Discharge Line |
| 55 | Cabling,JB, Earthing: Note: laying, glanding, ferruling, termination of cables shall be along with accessories like certified double compression cable glands with PVC shrouds, plugs for excess entries, SS 316 engraved tag plate, mounting clamp, SS 316 fasteners , OFC accessories (like 12/24 port LIU, splice trays, loaded adaptor and blank plates, UTP and optical patch cords, pigtails, media converters etc), LAN face plates, conduits, structural steel for mounting of equipments, making RCC trenches with cover wherever required, hume pipes, Aluminium tags, lugs, ferrules, etc. |
| 56 | laying, glanding, ferruling, termination of FRLS Armoured Copper Power cable as per tender specifications. |
| 57 | 3C x 2.5 sqmm |
| 58 | 12C x 2.5 sqmm |
| 59 | laying, glanding, ferruling, termination of FRLS Armoured Copper Control cable as per tender specifications. |
| 60 | 2C x 1.5 sqmm |
| 61 | 48C x 1.5 sqmm |
| 62 | laying, glanding, ferruling, termination of FRLS Armoured Copper Signal cable as per tender specifications. |
| 63 | 1P x 1.5 sqmm |
| 64 | 2P x 1.5 sqmm |
| 65 | 16P x 1.5 sqmm |
| 66 | laying, glanding, ferruling, termination of 1C x 6 Sq. mm FRLS Flexible copper insulated green wirefor earthinginstruments and junction boxes etc complete as per specification and tender document |
| 67 | Installation of Exd/FLP Junction Box (Power/Control/Signal JB) with IP 65 as per specification suitable for hazardous area of zone 1, group IIA/IIB, T3 or better having CCOE/CMRI approval. It shall be complete in all respect. Accessories like certified double compression cable glands with PVC shrouds & plugs for excessentries, SS 316 engraved tag plate, mounting clamp & SS 316 fasteners.Complete as perspecification / tender documents. |
| 68 | 24 way JB |
| 69 | 18 way JB |
| 70 | 6 way JB |
| 71 | 4 way JB |
| 72 | Design, Supply, Installation, Testing & commissioning of MOV DB as approved by EIC. The job includes bus-bar modifications if any at site. Installation of panel shall be with supply of all ancillary materials all complete as directed by EIC. The MOV DB shall have minimum 12 nos. feeders for providing power supply to 10 nos. 6" MOVs. & 2 nos. spare and ancillary items as directed by EIC. |
| 73 | Design, development, modification, configuration, testing and commissioning of existing TAS software, DCS/PLC logic, GUI etc for implementation of following features after FAT (if required) or during CAMC period as stated in tender document. The job includes necessary tro-& fro travel, lodging, boarding, food etc required for implementation at site complete in all respect and as per directionof EIC. The job includes supply, installation, testing & commissioning of required additional IOs, PLC modules, CIUs and necessary hardwares at Control room, liasioning with TAS vendors of refinery, OMCs, Pipeline division etc.for completion of the work as directed by EIC. |
| 74 | Product pump addition |
| 75 | Product tank addition |
| 76 | MISCELLANEOUS WORKS FOR CABLE LAYING |
| 77 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in widthas well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately. |
| 78 | i) All kinds of Soil |
| 79 | Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. |
| 80 | i) Local Fine Sand within grading zone IV |
| 81 | Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: |
| 82 | iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) |
| 83 | v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) |
| 84 | viii) 1:4:8(1 Cement :4 Coarse Sand :8 Graded stone aggregate of 20mm) |
| 85 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 86 | i) Foundations,footings,bases of columns, etc. for mass concrete |
| 87 | Clearing grass and removal of the rubbish outside site premises and at an unobjectionable place. |
| 88 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels |
| 89 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 |
| 90 | Providing and laying inposition specified grade ofreinforced cement concreteexcludingthecostofcentering,shuttering, finishing and reinforcement - All work up to plinth level |
| 91 | ii) RCC 1 Cement :2 Coarse Sand: 4 Graded Stone Aggregate 20mm |
| 92 | GI STRUCTURAL STEEL & GRATING: Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position. Structure & Gratings shall be duly hot dip galvanized after fabrication given in the detailed specification with minimum thickness of galvanisingof average 85 microns all through the sectional area, & erecting in position and fixing in position mild steel Gratingwelded/ bolted/placedwith adequate clamps wherevever applicable in floors, platforms, staircase steps, trench covers, landings etc. including cutting for openings wherever required as specified and directed at all floors at all levels etc. complete. The grating shall confirm to the typical section details of grating as shown in drawing . This works includessetting in position in Footpath/ Gutter/Drains/Floors to the required level and line over a bed of 20mm Average thick cement mortar (1:3). NOTE: The Grating shall be factory made, i.e. fabricated & Hot dip Gavanised in shop & transported to site for erection. |
| 93 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength |
| 94 | ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH |
| 95 | Providing and laying cement plaster on surfaces with fine sand including curing etc. |
| 96 | ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 97 | DemolishingPCC/RCC manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge. |
| 98 | i) 1:3:6 or richer mix (i/c equivalent design mix) |
| 99 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge |
| 100 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 101 | Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm: |
| 102 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty |
| 103 | iv) 300 mm dia. R.C.C. pipe |
| 104 | Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil |
| 105 | v) 450mm x 25mm x 2mm |
| 106 | ii) 150mm x 25mm x 2mm |
| 107 | ii) Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng.etc. all complete as per specif. & direction of Engineer-In-charge |
| 108 | Supply & drawing/laying, jointing, connecting, testing and commissioning ofearth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : |
| 109 | ii) 32 x 6 mm G.I.strip |
| 110 | PLC MODULE REPLACEMENT |
| 111 | SUPPLY COMPONENTS |
| 112 | Cabling, JB, Earthing |
| 113 | Supply of cables shall be along with accessories like certified double compression cable glands with PVC shrouds, plugs for excess entries, SS 316 engraved tag plate, mounting clamp, SS 316 fasteners , OFC accessories (like 12/24 port LIU, splice trays, loaded adaptor and blank plates, UTP and optical patch cords, pigtails, media converters etc), LAN face plates, conduits, structural steel for mounting of equipments, making RCC trenches with cover wherever required, hume pipes, Aluminium tags, lugs, ferrules, etc |
| 114 | Supply of FRLS Armoured Copper Power cable as per tender specifications. |
| 115 | 3C x 2.5 sqmm |
| 116 | Supply of FRLS Armoured Copper Control cable as per tender specifications. |
| 117 | 2C x 1.5 sqmm |
| 118 | 4C x 1.5 sqmm |
| 119 | Supply of CAT 6 Ethernet armoured cable as per tender specifications and instructions of Engineer in charge. |
| 120 | Supply of 1C x 6 Sq. mm FRLS Flexible copper insulated green wire for earthing instruments and junction boxes etc complete as per specification and tender document |
| 121 | Supply of Exd/FLP Junction Box (Power/Control/Signal JB) with IP 65 as per specification suitable for hazardous area of zone 1, group IIA/IIB, T3 or better having CCOE/CMRI approval. It shall be complete in all respect. Accessories like certified double compression cable glands with PVC shrouds & plugs for excess entries, SS 316 engraved tag plate, mounting clamp & SS 316 fasteners. Complete as per specification / tender documents. |
| 122 | 4 ways JB |
| 123 | SERVICE COMPONENTS |
| 124 | Cabling, JB, Earthing |
| 125 | Laying, glanding, ferruling, termination of cables shall be along with accessories like certified double compression cable glands with PVC shrouds, plugs for excess entries, SS 316 engraved tag plate, mounting clamp, SS 316 fasteners , OFC accessories (like 12/24 port LIU, splice trays, loaded adaptor and blank plates, UTP and optical patch cords, pigtails, media converters etc), LAN face plates, conduits, structural steel for mounting of equipments, making RCC trenches with cover wherever required, hume pipes, Aluminium tags, lugs, ferrules, etc |
| 126 | Laying, glanding, ferruling, termination of FRLS Armoured Copper Power cable as per tender specifications. |
| 127 | 3C x 2.5 sqmm |
| 128 | Laying, glanding, ferruling, termination of FRLS Armoured Copper Control cable as per tender specifications. |
| 129 | 2C x 1.5 sqmm |
| 130 | 4C x 1.5 sqmm |
| 131 | Laying, glanding, ferruling, termination of CAT 6 Ethernet armoured cable as per tender specifications and instructions of Engineer in charge. |
| 132 | Laying, glanding, ferruling, termination of 1C x 6 Sq. mm FRLS Flexible copper insulated green wire for earthing instruments and junction boxes etc complete as per specification and tender document |
| 133 | Installation, testing and commissioning of Exd/FLP Junction Box (Power/Control/Signal JB) with IP 65 as per specification suitable for hazardous area of zone 1, group IIA/IIB, T3 or better having CCOE/CMRI approval. It shall be complete in all respect. Accessories like certified double compression cable glands with PVC shrouds & plugs for excess entries, SS 316 engraved tag plate, mounting clamp & SS 316 fasteners. Complete as per specification / tender documents. |
| 134 | 4 ways JB |
| 135 | Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil |
| 136 | i) 100mm x 25mm x 2mm |
| 137 | ii) Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng.etc. all complete as per specif. & direction of Engineer-In-charge |
| 138 | Supply & drawing/laying, jointing, connecting, testing and commissioning ofearth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : |
| 139 | 50 x 6 mm G.I.strip |
| 140 | Supply, Design, Engineering, installtion, testing & commissioning of PLC Panel & accessories for pump house automation with redundnat CPU, power supply, IO communication and SCADA communication, Control Expert License, Engineering Services for the PLC Logic Development & containing PLC modules as per site requirement for MS, HSD & SKO pump PLC system. The job includes all accessories such as lugs, ferrules, 0.75 sqmm copper control cable, terminal blocks, fuses & any other equipments required for commissioning of PLC panels. Job also includes Panel Wiring, PLC Hardware installation, deployment of PLC programming software integration of new system with existing TAS including support from OEM if required. The scope includes any other items not specifically mentioned as above and required for commissioning of the system as directed by Engg.-in-charge. Supply of all components are inclusive of Packing, forwarding, TPI, Transportation & transit insurance. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
