Military Engineer Services-MES has published Repairs To Ac Sheet Valley Gutter False Ceiling Roof Treatment Joinery And Certain Misc Works At Otm Accn Under Age Br I Of Ge North Delhi Cantt 10 Repairs To Ac Sheet Valley Gutter False Ceiling Roof Treatment Joinery And Certain Misc Works At Otm Accn U. Submission Date for this Tender is 07-12-2021. Drainage Tenders in GE NORTH DELHI CANTT-10 Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-12-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel/ fibre sheeting of any guage as in roof covering includingridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified anddirected. |
| 2 | Hacking out oldbroken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, nut bolts & filletsat ht upto 15 mtr complete all as specified and directed. |
| 3 | Dismantling of AC sheet roof corrugated/semi corrugated of any description including ridges/gutters etc at height upto 15 mtr complete all as specified anddirected. |
| 4 | Dismantlingwroughtiron or mild steel work of any description not otherwise provided for .complete all as specified anddirected. |
| 5 | M&L 6mm thick Asbestos cement Sheet corrugated/semi corrugated fixed with ""L"type or "J"type or cranked hook/bolts at height upto 15mtr all as specified and directed |
| 6 | Fixing only6 mm thick AC sheet corrugated/semi corrugated at height upto 15 mtr fixed with "L" type or "J" type or cranked hook bolts complete all as specified and directed. |
| 7 | S&F for MS work in Bands, straps, supports or stays for RWP, ventilating pipes, gutters including bolts, if reqd hooks (stay), clamps, holdfasts, wall ties, nosing angles,hooks for hanging fans and similar small articles conforming to Fe-290 gde E-165 hight up to 15 mtrs complete all as specified anddirected. |
| 8 | S&F structural steel work for rolled sections as in main and crossbeams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angles and angle cleats or other connecting plates gde Fe-410-Wat any height complete all as spd and directed. |
| 9 | S&F Rough cast, wired glass exc 6.00 mm thick but n.exc6.40 mm thick fixed with Flat Iron and nut bolts in square exc. 0.75 Sqm but n.exc 01 sqmin each pane at ht upto 15 mtr complete all as specified and directed. ( Incl Flat Iron & nut bolts ) |
| 10 | S&F sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane at ht upto 15 mtr complete all as specified and directed. |
| 11 | Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 12 | Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 13 | M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15 mtr complete all as specified and directed. |
| 14 | M&L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15 mtr complete all as specified and directed. |
| 15 | Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed. |
| 16 | M&L 15 mm thick Ready mix plaster (Make:- Ultratech readiplast/Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (internal surface )finished even and smooth complete all as specified and as directed by GE. |
| 17 | M&L 15 mm thick Ready mix plaster (Make:- Ultratech readiplast/Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (external surface )finished even and smooth complete all as specified and as directed by engr-in-charge. |
| 18 | M&L preparation of newly plastered surface of walls and applying two coats of cement base paintcomplete all as specified and directed. |
| 19 | Taking down and refixingonly the Sliding/ rolling shuttersarea exc 10 sqm and n.exc 25 sqmincluding hood covers after cleaning the sides of the shutters, suspension rod, shaft and the guide channel, greasing all the moving parts, including gear box, strengthening the shafts of guide channel lath, curtain of shutters, locking device incuding welding, reballing and re-alignment of connected rod andselecting position the roller, ball bearing including replacement of worn and unserviceable parts (cost of new parts shall be paid under respective item of Sch "A") including nuts and bolts complete all as directed. |
| 20 | S&F 2mm thick PGI Sheet having 275 mm of zinc coating per sqm (both side) in gutter dripper straight flushing with 100mm overlap made to required shape as rain water pipe of 250mm dia incl welding or revetting and fixed in position at ht upto 15 mtr all as specified and directed. |
| 21 | S&F0.80 mm thick PGI sheet as in ridges, hips valley gutters drip andstraight, flashingetc having 275 gm of zinc coating per sqm (both side inclusive) fixed with L or J hook or cranked hook bolts up to 15 mtr hight completeall as specified and directed. |
| 22 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap fixed with coach screw and washer, L-type or J-type hooks bolts in roof, wall etc hight up to 15 mtrs complete all as spd and directed. |
| 23 | M&L providing 1:2:4 type B-0 cement concrete in roof padding or PCC gola for maintain the roof slope etc and other similar works complete all as specified anddirected. |
| 24 | Supply only safety lever locks mild steel with 4 lever for rolling shutters. |
| 25 | Supply only rollers and ball bearing of approved make complete all as specified anddirected. |
| 26 | Supply only mild steel helical wire spring 45cm long , 75 mm dia and weighting of each spring not less than 3.00 kg complete all as specified and directed |
| 27 | Supply only steel gear Box of full set required size and approved make complete all as specified anddirected. |
| 28 | M&L for preparation of new steeland iron surfaces any description over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide completeall as specified. |
| 29 | S&Fsteel rolling shutters,withoutball bearing as specifiedincluding top covers anchoring rod, hasp & staple and one shop coat of red oxide primer gear operated type with bevel gear box and crank handle and errected in position complete thickness of laths 1.25mm complete all as specified and directed. |
| 30 | S&F for ball bearing for rolling shutters all as specified and directed. |
| 31 | M&L for preparation of newlysteelsurfaces and applyng two coats of aluminium paint over a coat of red oxide complete all as specified and directed. |
| 32 | M&L for preparation of oldsteelsurfaces of rolling shutter and applyng two coats of aluminium paintcomplete all as specified and directed. |
| 33 | S&F in repairs 1.25 mm thick laths in any type of rolling shutter and in any length complete all as specified and directed. |
| 34 | Dismantling wall & ceiling boards incl frame of any description as in panelling ceiling, etc incl cover fillets in any surfaces complete complete all as specified anddirected. |
| 35 | M&L for Gypsum ceiling board for ceilingprepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light complete all as specified and directed. |
| 36 | Taking down brick tiles,terracing tiles, single layer from roof laid, beddedand pointed in any mortar allas specified & directed. |
| 37 | Demolition of mud phuska in roof any thickness, including plaster and leaping/whether full thickness removed on only a part thereof complete all as specified anddirected. |
| 38 | M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning old surface and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPCshall be measured and paid separately) complete all as specified anddirected. |
| 39 | M & L forWater proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (A)Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (B)Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (C)Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by GE |
| 40 | Taking down chowkats with shutters (without taking off shutters from the frame)exc 1.5 Sqm but n exc 4 Sqm each removing to or store complete. |
| 41 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified anddirected. |
| 42 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plaincolour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified anddirected. |
| 43 | S&F Aluminium anodised 200mm long barrel tower bolts of extruded section and fixed complete all as specified anddirected. |
| 44 | S&F Extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified anddirected. |
| 45 | S&F butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified anddirected. |
| 46 | S&Fpowder coated aluminium window double leaf X 2 (2 leaf glazed & 2 leaf with SS wire mesh ) made of aluminium tubular frame of size 101.60 x 44.40 x1.6 mm and shutter of section 38.10 x 38.10 x 1.60 mm and style fixed openable horizontal and vertical member of aluminium beading rubber gasket of aluminium fittings such as tower bolts, handle stay and rod and hinges, 5 mm thick glass etc and outer frame fixed with aluminium grill of thickness 4 mm and aperture 60 x60 mm on U channel withcomplete all as specified and directed( Note : Fixtures / fittings of window shutter are deemed to be inclusive in the quoted rate) complete all as specified anddirected. |
| 47 | S&Fpowder coated aluminium anodised hollow section door frame of size 101.60x44.50x1.60 mmand shutter openable with top rail , style of section 84 x 44.7 x 1.60 mm and lock rail, bottom& top rail of 101.60x44.5 x1.6 mm incl jointing cleats, snap beading, glass/ nova pan,gasket for fixing glass/board in panel including 2 nos dish type handle,3 nos hinges, tower bolts -02 Nos 150 mm in each leaf and screws complete all as specified. ( Note : Fixtures / fittings of door shutter are deemed to be inclusive in the quoted rate) complete all as specified anddirected. |
| 48 | S&F in repairs steel ventilators with top hung shutters including hinges, steel peg stay complete in repairs, all as specified and directed by GE. |
| 49 | M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified anddirected. |
| 50 | M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic paint over a coat of red oxide zinc chrome primer complete all as specified anddirected. |
| 51 | M&L preparation of newly plastered surfaceon walls andapplying 3 mm thick birla putty smoth finish , 2 coat of OBD over a one coat of primer complete all as specified. |
| 52 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40mm Fixed with stainless steel wire staplesand nut bolt including flat iron strips complete all as specified and directed by GE. ( Note : Rate inclusive wooden /steel/ nut bolts rquired for fixing ) |
| 53 | S&F factory made, 2nd class hard wood (sal/hollock),plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick completeincluding fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified. |
| 54 | S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut &mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats completeincluding fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified. |
| 55 | S&F of galvanised mild steel wire clothcut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified . |
| 56 | S&F in repair galvanised mild steel wire clothcut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified . |
| 57 | S&F in repair2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc., complete all as specified anddirected. |
| 58 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 59 | M&L for glass dividing strips , 3mm thic and width of strip 38mm inserted in position to confirm design complete all as specified anddirected. |
| 60 | M&L for providing40 mm thick cement concrete 1:2:4 type B-1using20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified. |
| 61 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified anddirected. . |
| 62 | M&L steel windows with side hung shutter including friction hinges with steel handle and two No 100mm mild steel bolts on each opening shutter complete with glazing bars dove tailed or welded including a shop coat red oxide of zinc chrome primer completeall as specified. |
| 63 | S&F in repairs aluminium die cast body door closer hydraulically regulated, Designation No.2 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified anddirected. |
| 64 | S&F in rep of aluminum door lock brass vertical type 100mm,4 lever suitable for aluminum doors with duplicate key complete all as specified anddirected. |
| 65 | M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminiumalloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking out the old damaged spring any description and any position and making good all disturbed surfaces to match with adjoining surfaces all as directed. |
| 66 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 67 | M&L for Vitrified Ceramic coloured dark shade tiles 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqmas in floors,skirting, set and jointed in neat cement slurry and pointed in colouredcement to match the surface insluding 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 68 | S&F non skid ceramic tiles 300X300X 7 mm thick,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15mm thick secreed in CM 1:6 for bed layercomplete all as specifed and directed. |
| 69 | M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x350x7mm)thick set and jointed in neat cement slurry and pointed in colouredcement to match the surface complete all as specified and directed by GE. |
| 70 | M&L for10 mm thick rendering as backing coat onbrick /concrete surfacesin cement mortar 1:4 rough finished on vertical surfaces to receive tiles etc.complete all as specified. |
| 71 | Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 1,89,688.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
