|
| 1 | Taking down carefully copper / aluminium point wiring (light, fan, socket, power, etc)complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all asspecified and as directed. |
| 2 | Taking down un-serviceable DB/sheet metal enclosures including earth plug socket of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all asspecified and as directed. |
| 3 | Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through andincluding rigid PVC or PVC casing & caping including cutting chases for cinduits and making good disturbed surfaces complete all as specified and asdirected. |
| 4 | All as per Sl item No.03 above but with out taking down steel conduit. |
| 5 | M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick hylum sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .Note :- surface conduit shall be laid in ceiling portion only. |
| 6 | All as per serial item No 5.00 above but for One light point controlled by 2 way switch. |
| 7 | All as per serial item No 5.00 above but for 5 Amps socket outlet on same board with other switches. |
| 8 | All as per serial item No 5.00 above but for 5 Amps socket outlet on independent board. |
| 9 | All as per Item No. 5.00 above but for 15 Amps socket point on independent board with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all asspecified and as directed. |
| 10 | M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and includingin PVC casing & caping with all fittings and accessories , complete fixed on wall/roof/floor etc, with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick hylum sheetcover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed . |
| 11 | All as per serial item No 10.00 above but for 5 Amps socket on same board with other switches. |
| 12 | All as per serial item No 10.00 above but for 5 Amps socket point on independent board. |
| 13 | All as per serial Item No. 10.00 above but for 15 Amps switch socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor as earth wire complete all as specified and as directed. |
| 14 | All as per Serial Item No.10 above but wiring in existing conduit / casing & capingfor one way switch one light/ fan/bell point controlled by one, one way switch 5Ampscomplete all as specified and directed . |
| 15 | All as per Serial Item No.10 above but wiring in existing conduit / casing & capingfor one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed. |
| 16 | All as per Serial Item No.10 above but wiring in existing conduit / casing & capingfor one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed. |
| 17 | All as per serial Item No.10 above but wiring in existing conduit / casing & capingfor 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor as earth wire |
| 18 | M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting ofmodular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch one light / fan point controlled by one, one way switch complete all as specified and directed . |
| 19 | All as per serial item No 18.00 above but for 5 Amps socket on independent board. |
| 20 | All as per serial item No 18.00 above but for 5 Amps socket on same board with other switches. |
| 21 | All as per serial item No 18.00 above but for wiring with 4 sqmm copper cable with 4 sqmm copper cable as continuous earth wire for one 5/6 pin / 16 Amps socket outlet on independent boards. |
| 22 | S&F in replacement switch piano 5 Amp flush type single pole one way with ISI marked,complete all as specified and as directed. |
| 23 | S&F in replacement switch piano 5 Amp flush type two way with ISI marked,complete all as specified and as directed. |
| 24 | S&F in replacementsocket outlet 5 Amps 2-in-1, 3 pin 230 V AC flush type, complete all as specified and as directed. |
| 25 | S&F in replacement switch socket outlet 5 Amps 2-in-1, 3/5 pin 230 V AC flush type, complete all as specified and as directed. |
| 26 | S&F in replacement switch socket outlet, multipurpose, 3 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed. |
| 27 | S&F in replacement ceiling rose surface bakelite type 65x50mm, three terminals complete including taking down old all as specified and asdirected by Engr-in-Charge. |
| 28 | S&F in replacement bell push, flush type, 5 Amps, 230 Volts complete all as specified and as directed. |
| 29 | S&F in replacement modular switch single pole 1way, 6 Amps 1 module complete all as specified and directed. |
| 30 | S&F in replacement modular switch single pole 1way, 16 Amps 1 module complete all as specified and directed. |
| 31 | S&F in replacement modular socket, 6 amps 2/3 pins combined 2 module complete all as specified and directed. |
| 32 | S&F in replacement modular socket, 6/16 amps 2/3 pins combined 2 module complete all as specified and directed. |
| 33 | S&F in replacement modular type fan regulator, 120 W, 2 module, complete all as specified and as directed. |
| 34 | S&F in replacement modular bell push, single pole 1way, 6 Amps 1 module complete all as specified and directed. |
| 35 | S&F in replacement modular white cover plate with frame suitable for 2 Module complete all as specified and as directed. |
| 36 | S&F in replacement modular white cover plate with frame suitable for 3 Module complete all as specified and as directed. |
| 37 | S&F in replacement modular white cover plate with frame suitable for 6 Module complete all as specified and as directed. |
| 38 | S&F in replacement modular white cover plate with frame suitable for 8 Module complete all as specified and as directed. |
| 39 | S&F in replacement Bell ding dong AC 230 volt single pole complete all as specified and as directed. |
| 40 | S&F in replacement ofElectronic fan regulator, stepped type, 100 W, AC, 230 Volts,fixed on existing laminated sheet complete all as specified and as directed. |
| 41 | S&F in replacement ofElectronic mini fan regulator, stepped type, 100 W, AC, 230 Volts,fixed on existing laminated sheet complete all as directed. |
| 42 | S&F LED light fitting 1X10Wbulk head luminaries, with lamp holdersincluding 10W LED bulb including taking down old fitting complete all as specified and asdirected Make : Model No. LW07-141-XXX-57-G1 of Make Wipro or techno commercially equivalent in Havells/ Bajaj/Philips/CROMPTON |
| 43 | S&F in replacement of LED tube light fitting 20W 4 feet PVC extruded with batten ( integrated driver), 6500K CCT, decorative type with all accessories internally pre wired including retrofit T5 polycarbonate tube with connector block and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and asdirected Make :Havells Cat Part No. LHEXBXPNIN1W020 or techno commercially equivalent model of make Bajaj /Philips / CROMPTON / wipro |
| 44 | S&F in replacement of LED PVC extruded batten tube light fitting2 feet, 10 watt with retrofit T5 polycarbonate tube with connector block etc.,complete with all accesories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and asdirected Make : Model No. LL20-111-XXX-65NE3 of Make WIPRO or techno commercially equivalent in HPL / Havells /CROMPTON/ Philips |
| 45 | S&F LED tube rod ( integrated driver), 6000K CCT, 4 feet long of 20 watt (PC) in existing tube light fitting includingtaking down oldtube rod complete all as specified and asdirected Make : CROMPTON / Bajaj /Philips / Havells/ wipro |
| 46 | S&F in replacement of Recess mounted 36W LED panel light (2\" x 2\")cool white , white powder coated CRCA sheet steel housing with high power LED\"s mounted, seamless front frame with flat white high transmission acrylic coverwith all accessories and prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Bajaj model No. BZRSQL 36W GZi NW or techno commercially equivalent of make inCROMPTON / Havells / Philips / wipro. |
| 47 | S&F in replacement lamp Holder, insulated body with back plate , 230 Volts for batten fittingcomplete all as specified and as directed. |
| 48 | S&F LEDdownlight of 6 watt of warm white / white 5\" dia (as per existing) flat down light back lit, recess mounting round type with all attachment includingtaking down old downlight complete all as specified and asdirected . Make : Cat Part No. LD80-350-XXX-60-XX of make Wipro or techno commercially equivalent in Bajaj / Havells / Philips / CROMPTON |
| 49 | S&F LEDdownlight of 9 watt round/square withwarm white / white (as per existing) flat down light back lit, recess mounting round/square type with all attachment includingtaking down old downlight complete all as specified and asdirected Make : Model No. LD80-530-XXX-60-XX of make Wipro or techno commercially equivalent in Bajaj / Havells / Philips / CROMPTON |
| 50 | S&F in replacement of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LED\"s with secondary optics and IP-66 protection security light luminaires 25 W, 5700K, impact resistance of IK 07fixed with and including bracket and made out of 25 mm dia GI tube light grade 1.2 mtr bend to shape as required including 02 Nos MS clamp (FI 25 x 3mm) with nuts and bolt washerincluding connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.Make :- Havells Model No. LHETAXU7PA6S025 or techno commercially equivalent make inBajaj / CROMPTON / Philips/ wipro |
| 51 | S&F PVC board of size 30cmX25cmX 5cm depthincluding taking down old board complete all as specified and as directed. |
| 52 | S&F PVC board of size 25cmX20cmX 5cm depthincluding taking down old board complete all as specified and as directed. |
| 53 | S&F PVC board of size 20cmX15cmX 5cm depthincluding taking down old board complete all as specified and as directed. |
| 54 | M&L for PVC hylum sheet 3mm thick top cover of size 30cmX25cm including taking down old one complete all as specified and directed. |
| 55 | M&L for PVC hylum sheet 3mm thick top cover of size 25cmX20cm including taking down old one complete all as specified and directed. |
| 56 | M&L for PVC hylum sheet 3mm thick top cover of size 20cmX15cm including taking down old one complete all as specified and directed. |
| 57 | M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & capingfixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dollycomplete all as specified and directed.Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement. |
| 58 | M&L for submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & capingfixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dollycomplete all as specified and directed.Note :- Three runs of 4 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement. |
| 59 | M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through existing conduit / PVC casing & caping and connected to common earth dollycomplete all as specified and directed.Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement. |
| 60 | M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including drawn through and including 25mm diaPVC rigid conduitconcealed with accessories and connected to common earth dollycomplete all as specified and directed.Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement. |
| 61 | M&L for submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including drawn through and including 20mm diaPVC rigid conduitconcealed with accessories and connected to common earth dollycomplete all as specified and directedNote :- Three runs of 4 sqmm and one run of PVCconduit shall be measured as one length for the purpose of measurement. |
| 62 | M&L factory made distribution board in sheet metal enclosure in single door with out bus bar,SPN 2 way, 240V for fixing MCB\"s complete all as specified and as directed. |
| 63 | S&F factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,SPN 4 way, 240V for fixing MCB\"s complete all as specified and as directed. |
| 64 | S&F factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,SPN 8 way, 240V for fixing MCB\"s complete all as specified and as directed. |
| 65 | S&F factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,TPN 4 way, 415V for fixing MCB\"s complete all as specified and as directed. |
| 66 | Taking out old unserviceable MCCB TP/ TPN FP from existing LT panel boardand S&F MCCB TPN 100 Amps capacity, breaking capacity 25KA at 415V 50 Hz AC supply including necessary modification in panel board if required to fix the MCCB complete with replacement of incoming and out going cable connection with lugs, aluminium conductor cable of proper size, nut, bolts, burnt lugs and wire/ cable pieces as required at site complete all as specified and as directed. |
| 67 | M&L MCB SPN ‘C’ Curve 10KA, 5 to 32 amps 240 volt complete all as specified and directed . |
| 68 | M&L MCB SPN ‘C’ Curve 10KA, 40 amps 240 volt complete all as specified and directed . |
| 69 | M&L MCB SPN ‘C’ Curve 10KA, 63 amps 240 volt complete all as specified and directed . |
| 70 | M&L MCB SP ‘C’ Curve 10KA, 5 to 32 amps 240 volt complete all as specified and directed . |
| 71 | M&L MCB SP ‘C’ Curve 10KA, 40 amps 240 volt complete all as specified and directed . |
| 72 | M&L MCB SP ‘C’ Curve 10KA, 63 amps 240 volt complete all as specified and directed . |
| 73 | M&L MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed . Make :Legrand cat part No. 603308 or techno commercially equivalent model of make Siemens/ Havells |
| 74 | M&L Blanking plate for filling gap of MCB complete all as specified and directed. |
| 75 | S&F in replacement sheet metal enclosures comprising 2 pin earth plug socket, MCB SP 20 Amps (C-curve-10 KA) modular type complete all as specified and as directed. |
| 76 | Taking down ceiling fan / wall mounting fan ,any size and sweep from its position and transport to workshop for servicing,dismantling for servicing including removal of bearing,bushes,condenser, connector, PVC insulated unsheathed twisted twin core flexible copper conductor cord,split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing, re- assamble the same and transporting from workshop to any location in Jalipa and fixing to position / location as directed, connecting to electric system, testing etc for smooth functioning complete all asspecified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store / workshop & taking down unserviceable/ defective parts.(iii) Item such as bearings,gun metal bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only. |
| 77 | Taking down and transporting of exhaust fan 9\" (230mm)/12\" (300mm) / 15\" (375mm)/ 18\" (450mm) sweep from any location inside Jalipa Mil Stn to MES E/M Store Yard / Workshop for stripping of fan washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade body etc thoroughly provision of new greasing replacement of worn-out / defective unserviceable parts (wherever necessary) assembling the same after defective / unserviceable parts is replaced including provision of PVC insulated unsheathed twisted twin core flexible copper conductor wire upto 0.7 mts long size 23/0.0076 (ISI marked)and re-fixing the same at the same location including making good disturbed surface including testingetc for smooth functioning complete all asspecified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store / workshop & taking down unserviceable/ defective parts.(iii) Item such as bearings, bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only. |
| 78 | M & L spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as directed by Engineer-in-charge. |
| 79 | Supply only fan blades (set of three) of any make / type of ceiling fan of size 1200mm sweep complete all as specified and as directed. |
| 80 | Supply only fan blades (set of three) of any make / type of ceiling fan of size 1400mm sweep complete all as specified and as directed. |
| 81 | Supply onlyU clamp complete with nut bolt washer, split pinand rubber wheel etccomplete all as specified and as directed. |
| 82 | M&L cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed. |
| 83 | M&L cutting and taking out old burnout winding of 230 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed. |
| 84 | M&L cutting and taking out old burnout winding of 300 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testingcomplete all as specified and as directed. |
| 85 | M&L cutting and taking out old burnout winding of 380/450 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed. |
| 86 | M&L spray painting with two coats of spray painting to exhaust fan any type and size with Ist quality synthetic enamel paint, colour as approved after removing existing paint by scrubbing, dusting etc and finally writing the fan numbers etc in paint (Colour as approved )complete all as specified and as directed. |
| 87 | Supply only ball bearing suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and as directed. |
| 88 | Supply only gun metal bush suitable for ceiling fanof any sweep complete all as specified and as directed. |
| 89 | Supply only gun metal bush suitable for exhaust fan any sweep complete all as specified and as directed. |
| 90 | Supply only condensor 2.5 MFD suitable for ceiling fan of any sweep complete all as specified and as directed. |
| 91 | Supply only condensor 4.0 MFD suitable for Exhaust fan /wall mounted fan/ Desert Cooler of any sweep complete all as specified and as directed. |
| 92 | S&F in replacment 230mm sweep Exhaust fan plastic body minimum three star rating with accessriescomplete including taking down old unserviceable fan and depositing at MES store all as specified and asdirected . |
| 93 | S&F in replacment 300mm sweep Exhaust fan plastic body minimum three star rating with accessriescomplete including taking down old unserviceable fan and depositing at MES storeall as specified and asdirected . |
| 94 | S&F in replacment 1200mm sweep ceiling fan minimum three star rating complete including taking down old unserviceable fan and depositing at MES storeall as specified and asdirected. |
| 95 | M&L for front grill (moveable) of the Desert Cooler made out of 20 gauge PGI sheet including Selector switch with knob, indicator etc suitable for 4000/5000 cfm desert cooler including taking down old grill, selector switch, indicator, etccomplete all as specified and as directed. |
| 96 | M&L for desert cooler fan motor capacity 1/5 HP three speed, 1400 RPM single phase with fan blade, stand and selector switchincluding taking down old motor complete all as specified and as directed. |
| 97 | M&L for Submersible pump set of discharge head 2.5 Mtr 220-240 volts AC supply single phase 40 wattincluding taking down old pump from desert cooler complete all as specified and as directed. |
| 98 | M&L for grass/wood wool chips pad for Desert Cooler of size 600 x 550 x 30mm (set of three pads) superior quality complete all as specified and directedincluding taking down old pads complete all as specified and as directed. |
| 99 | M&L for supporting jali to grass/wood wool chips pad set made out of hard SS wire of 2mm dia and fitted inside louvers (set of three)complete all as specified and directedincluding taking down old jali complete all as specified and as directed. |
| 100 | M&L for selector switch with knob three speed suitable for fan motor of desert cooler including taking down old switch complete all as specified and as directed. |
| 101 | M&L for PVC insulated and PVC sheathed cable copper conductor 3 core 23/0.0076 cross sectional area (superior quality)including taking down old cable complete all as specified and as directed. |
| 102 | M&L for PVC water distributor of 3 out lets withMS nuts & boltsincluding taking down old one complete all as specified and as directed. |
| 103 | M&L for PVC elbow suitable for desert coolerincluding taking down old elbow complete all as specified and as directed. |
| 104 | M&L for PVC pipe 15mm dia heavy duty for Desert Cooler Pumpincluding taking down old pipe complete all as specified and as directed. |
| 105 | M&L for Plug top 3 pinof capacity 5 Amp AC 240 Volts 50 Hzincluding taking down old plug top complete all as specified and as directed. |
| 106 | M&L for Motor fixing ring (clip type) for desert cooler including taking down old one complete all as specified and as directed. |
| 107 | M&L for spray painting to old steel surfaces of Desert cooler up to 5000 cfm with two coatsof synthetic enamelpaint over one coat of red oxide primer on external surface and two coats of anti-corrosive black paint over a coat of red oxide primer on inside the body & water tank and side grillsincluding scraping / rubbing with wire brush on old surface of Desert cooler and writing MES No. etc complete all as specified and directed. |
