Cleaning / Repairs To Sewage Lines, Drains, Path Culverts, Retaining Wall Security Fencing And Miscellaneous Works At Pedong, Algarah, Dalapchand, Ap Algarah And Teesta Tcp Under Ge 867 Ews Cleaning / Repairs To Sewage Lines, Drains, Path Culverts
Tender Value
18 Lakhs
Estimated cost
Bid Submission
29 Nov 2021
0 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pedong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Cleaning / Repairs To Sewage Lines, Drains, Path Culverts, Retaining Wall Security Fencing And Miscellaneous Works At Pedong, Algarah, Dalapchand, Ap Algarah And Teesta Tcp Under Ge 867 Ews Cleaning / Repairs To Sewage Lines, Drains, Path Culverts, Retaining Wall Security Fencing And Miscellaneous Works At Pedong, Algarah, Dalapchand, Ap Algarah And Teesta Tcp Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n.exe 1.5m wide and n.exe 1.5m deep forfoundation, laying of pipes etc., or for shafts, wells, cesspits , manholes etc., n.exe 10 sqm on plan and n. exe 1.5 m in depth and getting out in soft/ loose soil complete all as directed by Engr - in - Charge. |
| 2 | Returning, filling in soil, including spreading leveling, watering and well ramming in laying not exceeding 25 cm thick complete all as directed by Engineer - in -Charge. |
| 3 | Removing excavated soil to a distance n.exe 50m and depositing where directedat a level n.exe 1.5m above the starting point complete all as directed by Engineer - in -Charge. |
| 4 | M&L for 100mm dia cast iron (Sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including taking out existing pipes complete all as directed by Engineer - in -Charge. |
| 5 | S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints laid in trenches including including demolition of old broken pipes including bedding and haunching and removing rubbish outside MD land complete all as directed by Engineer - in -Charge.complete all as directed by Engr-in-Charge. |
| 6 | S&F PVC (SWR) pipes 160mm bore single socket in any length with rubber ring joints laid in trenches including including demolition of old broken pipes including bedding and haunching and removing rubbish outside MD land complete all as directed by Engineer - in -Charge.complete all as directed by Engr-in-Charge.Make for item No 5&6: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME |
| 7 | M&L for salt glazed stone ware drain pipes of 150 mm bore grade \"A\" laid in trenches and jointed in cement mortar 1:1 including demolition of old broken pipes including bedding and haunching and removing rubbish outside MD land complete all as directed by Engineer - in -Charge.Make:- INDO PIPES/ KIRAN POTTERIES/ MANCHERIAL CERAMICS/NOVODAYA CERAMICS or equivalent make as approved by GE |
| 8 | M&L for plain cement concrete bed 1:3:6, type C2 (using 40 mm graded stone aggregate) to drain pipe 100/110 mm bore including packing under and hunching against the sides of pipes after they laid and tested complete all as directed by Engineer - in -Charge. |
| 9 | M&L for plain cement concrete bed 1:3:6, type C2 (using 40 mm graded stone aggregate) to drain pipe 150/160 mm bore including packing under and hunching against the sides of pipes after they laid and tested complete all as directed by Engineer - in -Charge. |
| 10 | M&L for 100mm dia cast iron plain bend (any radius) diminishing pieces or taper with cement joints, including taking out existing bend complete all as directed by Engineer - in -Charge. |
| 11 | Cleaning of sewage lines of dia 100/110 mm by rodding manually or mechanical means and taking out sludge, rigid soil through manholes and removing same to a distance not exceeding 50m dumped in low laying area and covering with earth and 2cm thick lime over filled earth and sprinkling bleaching powder complete all as directed by Engineer - in -Charge. |
| 12 | Cleaning of sewage lines of dia 150/160 mm by rodding manually or mechanical means and taking out sludge, rigid soil through manholes and removing same to a distance not exceeding 50m dumped in low laying area and covering with earth and 2cm thick lime over filled earth and sprinkling bleaching powder complete all as directed by Engineer - in -Charge. |
| 13 | Cleaning the septic tanks and manholes of any size by dewatering all the water, taking out sludge, rigid soil and shifting / removing same to a distance not exceeding 100m dumped in low laying area or by digging pitas per site condition and covering with earth and 2cm thick lime over filled earth and sprinkling bleaching powder, flushing the septic tanks/manholes with clean water in order to remove all slaked mud sludge tec cleaning the tanks with bleaching powder solution and surface dressing all around the septic tank/manholes to a distance not exc 3 mtr complete all as directed by Engineer - in -Charge.Notes: - (i) All precautions to be taken while working in foul condition.Filled up portion of sludge only shall be measured. |
| 14 | M & L Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggreagate as in cover slabs set in cement mortar 1:6 including all necessary form work and finishing exposed surfaces of concreteeven and smooth with out using extra cement including demolition of existing cover slabs complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for mild steel deformed TMT bars 8 mm dia as in reinforcement to concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed by Engineer-in-Charge. |
| 16 | M&L for mild steel round bars 10 mm dia and over as in handles and rungs of manholes, cut to length, bent to shape required, complete all as directed by Engineer-in-Charge. |
| 17 | Demolition of concrete block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge. |
| 18 | M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6complete all as specified and directed by Engineer-in-charge.Make: Shankar Saw Mills/Sangam Prefeb Products or equivalent as approved by GE. |
| 19 | M&L for factory made precast cement block masonry with solid blocks obtained from demolition under Item No. 17 above, exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 20 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed by Engr-in-charge. |
| 21 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished fair and even including taking down cementplaster on brickor stone masonrysurfaces of walls etc., includingrakingout joints, hackingfor key, scrubbingdown with wateretc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for preparingnewly plastered surfaces ofwalls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE. |
| 23 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channels, drains including all necessary form work and forming fair finished drain or channel of any girth, using extra cement, including forms, moulds, mitred/ stopped ends etc., including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed. |
| 24 | M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 25 | M&L for cement concrete chequered tiles 300 x300x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and removing rubbish off the premises complete all as specified and directed. Make: NITCO/DECO/BHARAT or equivalent as approved by GE. |
| 26 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M35 grade with grey cement and pigment laid on and including 50mm thick sand cushioning including demolition of existing tiles and removing rubbish off the premises complete all as specified and as directed by Engr-in-charge.Make: NITCO/ULTRA/EUROCON/DECO/BHARAT or equivalent as approved by GE. |
| 27 | M&L for plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreteincluding demolition of existing concrete in foundation and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 28 | M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F for 75mm diaPVC(SWR) pipe(4.50 KGF)for weep holes complete all as specified and directed by Engineer-in-Charge.Make: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK |
| 30 | M&L for flush pointing to precast block masonary surfaces in cement mortar 1:4 complete all as specified and directed by Engr-in-charge. |
| 31 | Dismantling of posts or struts (wood, steel or RCC), embedded in concrete any section, including taking out embedded portion complete all as directed by Engineer - in -Charge. |
| 32 | Excavation in post holes (for similar holes) each n.exc 0.5cum, getting out, in hard/dense soil and removing surplus soil to a distance n.exc 50m and making good surface complete all as directed by Engineer - in -Charge. |
| 33 | M&L for plain cement concrete 1:3:6 mix,type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concretecomplete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., including dismantling old rusted barbed wire any type all as specified and directed. |
| 35 | S&F MS galvanised chain link fencing fixed to any type of standards, rails, posts, straining bolts etc., including provision of binding wire including dismantling of old fencing wire mesh any type complete all as specified and directed by Engineer-in-charge. |
| 36 | S&F Fe-290 Gde E-165 mild steel angle or other sections as in posts and struts in fencing etc., and similar work including cutting tops to shape as directed,drilling holes, notching for wire, including all necessary drilling holes for bolting or riveting, etc., complete all as specified and directed by Engineer-in-charge. |
| 37 | S&F mild steel machine made screw bolts not exceeding 5cm long 11 to 15 mm (diameter of neck) with hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut, not exceeding 5 cm long all as specified and directed. |
| 38 | S&F Mild steel bar round bars 6 to 8 mm dia in fencing, cut to length, bent to shape required including cranking, bending, hooking ends and binding etc. conforming tograde I,IS-432 (Part I) all as specified and directed. |
| 39 | M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat ofred oxide zinc chrome primer all as specified and directed by Engineer-in-Charge. |
| 40 | M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat ofred oxide zinc chrome primer all as specified and directed by Engineer-in-Charge.Make for Item No. 39&40: ASIAN/ SHALIMAR/ BERGER/ JENSON & NICHOLSON/ IEL/ NEROLAC |
| 41 | M&L for 25mm thick precast cement concrete 1:2:4 mix type B0 (using 12.5 mm graded stone aggregate) jallies and loures including all mouldings but excluding frame setting in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge. |
| 42 | Sub Total of Schedule \"A\" |
| 43 | Schedule of Credit (Minus) Rs. 36,690.00 B/F from Ser page No. 25 NOTE: Bidder shall insert credit amount as rate Rs. 36,690.00 in Green field under Col-M.If bidder does not insert the amount the same will be deducted from total amount of Schedule \"A\" and accordingly total amount of tender will be considered in deciding the lowest tender. |
| 44 | Sub Total of Schedule of Credit |
AI Tender Summary
Tender Timeline
Nov 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender