Providing Fixing Aluminium Partition. ( Sh P F Aluminium Partition At Hall No.203 204 Of Material Science Engineering Department. Providing Fixing Aluminium Partition. ( Sh P F Aluminium Partition At Hall No.203 204 Of Material Science Engineeri
Tender Value
14.33 Lakhs
Estimated cost
Bid Submission
16 Nov 2021
0 days left
EMD
28680
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NIT Construction Cell Hamirpur H P → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Fixing Aluminium Partition. ( Sh P F Aluminium Partition At Hall No.203 204 Of Material Science Engineering Department. Providing Fixing Aluminium Partition. ( Sh P F Aluminium Partition At Hall No.203 204 Of Material Science Engineering Department.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work:- |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 3 | For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 4 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float plain/frosted glass panes of 5 mm thickness of Saint-Gobain make (weight not less than 12.50 kg/ sqm)including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 6 | Providing and fixing 4 mm thick bakalight tile/sheet in aluminium shutter with aluminium beading and rubber/gasket complete as per direction of Engineer - In - Charge including entire carriage of materials upto all leads, lifts and cost of other incidentals. |
| 7 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 8 | Providing and fixing floor spring including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 9 | Providing and fixing 250x16 mmsize aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 10 | Providing and fixing aluminium handles 200 mmsize, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 11 | Providing and fixing aluminium tower bolts 150x10 mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 12 | Electrical work:- |
| 13 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, singlecore cable of Havells/Plaza/Finolex make in surface/ recessed medium class PVC conduit as requiredincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 14 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 15 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 16 | Supplying and fixing of 25mm size of medium class PVC conduit (ISI) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as requiredincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 17 | Supply of following material of specified make in NIT Campus complete in all respect and best satisfaction of Engineer-in-chargeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 18 | S.P. 5/6 amps, one way modular switch, ISI marked |
| 19 | S.P. 15/16 amps, one way modular switch, ISI marked |
| 20 | 3 pin 5/6 amps modular socket outlet, ISI marked |
| 21 | 6 pin 15/16 amps modular socket outlet, ISI marked |
| 22 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Legrand-DX3/Schneider-Acti9/Siemens-Betagard/Hager makeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 23 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required of Legrand-Myrius/Schneider-ZENcelo / MK-Blenze/Cabtree Murano makeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 24 | 4 Module |
| 25 | 12 Module (200mmX150mm |
AI Tender Summary
Tender Timeline
Nov 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender