Rfp For Supply And Installation Of Furniture At Incubation Centre Bharatpur Rfp For Supply And Installation Of Furniture At Incubation Centre Bharatpur , Supply & Installation Workstations - 1200Mm W1 X 1200 W2 X 600Mm D Upbeat- The System Shall Be A Des, As Per RFP-Rajasthan

Rfp For Supply And Installation Of Furniture At Incubation Centre Bharatpur Rfp For Supply And Installation Of Furniture At Incubation Centre Bharatpur , Supply & Installation Workstations - 1200Mm W1 X 1200 W2 X 600Mm D Upbeat- The System Shall Be A Desk-Based System With A Platform Understructure Made Up Of A Combination Of Ms. Tubes And Plates. Understructure- The Slanted Legs Should Beconnected To The Understructure With The Help Of Pdc Connectors To Provide A Stable And Sturdy Base For The Worktops. Modesty Panel Shall Be Of Metal 1.2 Mm Thick Crca. Workstations- Worktop Shall Be Made Of 25Mm Thick Pre-Laminated Board Conforming To Is: 12823. All The Edges Of Work Surface Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. The Worktop Shall Be Complete With Provisions For Screen Mounting As Well As For Wire Management On The Workstation. Provisions For Fixing Of The Switches Shall Be On The Wire Tray / Channel. Access Flaps With Soft Closing Technology Shall Be Provided On The Table Tops To Access The Switch Points On The Tray. Wire Management-It Shall Be A Part Of The Understructure And Can Be In The Form Of Enclosed Metal Tray To Provide Concealed Wire Management Throughout The Cluster Formation. Wire Riser Legshall Be Provided As Per The Layout Structure. Screen- Screen Shall Be Provided As Per The Requirement Of The Design And Layout. The Screen Finishes Selected Is Fabric18mm Thk. The Screens Provided Shall Be Complete With Its Set Of Pdc Clamps For Fixing On The Worktop. Including Following A ) Pedestal, Free Standing & Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht, 2Drawer = 1Box+1File. B ) Cpu Holder - Metal C ) Keyboard Drawer With Mousetray Note: As Per Picture : ( 3*2 ) *9=54 Seats As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of 2 Seater Sofa The Seat Should Bemade Of Pu Foam With Density 32 ± 2 Kg / Cu.Mtr Having An Additional Top Layer Of J Pu Foam With Density 28 ± 2 Kg / Cu. Seat Should Beupholstered With Fabric Or Leatherette. 2 ) Back Foam: The Back Should Bemade Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 23±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure:Should Bemade Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood Dia 4Mm Zigzag Spring Assembly Should Bemounted In Understructure For Support And Additional Cushioning Purpose .It Should Bea Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate. As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of 3 Seater Sofa The Seat Should Bemade Of Pu Foam With Density 32 ± 2 Kg / Cu.Mtr Having An Additional Top Layer Of J Pu Foam With Density 28 ± 2 Kg / Cu. Seat Should Beupholstered With Fabric Or Leatherette. 2 ) Back Foam: The Back Should Bemade Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 23±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Bemade Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood Dia 4Mm Zigzag Spring Assembly Should Bemounted In Understructure For Support And Additional Cushioning Purpose .It Should Bea Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate. As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Chair With Headrest For 1 Person Seat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn.Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. Armrests : The Armrest Should Behaving Two Adjustment, Height ( 6.0±0.5Cm ) And Depth ( 6.0±0.5Cm ) . Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner.Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type• Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort • Tilt Tension Adjustment Can Be Operated In Seating Position • 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair • Seat / Back Tilting Ratio Of 1:2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated ( Dft 40 To 60 Micron ) Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cm Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm. Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter..The Neckrest Assembly Consshould Be Ts Of Upholstered Neckrest Inner ( Material-Polypropylene ) With Moulded Polyurethane Foam And Polyster Fabric.Upholstered Inner Should Befixed To Neckrest Cover.Neckrest Should Befixed To Back Assembly Through Neckrest Spine .Neckrest Assembly Has Height Adjustment Of 5.5 + / - 0.5Cm And Rotation Adjustment Of Overall 20° + / - 2°   As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Chair Without Headrest Seat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. Armrests : The Armrest Should Behaving Two Adjustment, Height ( 6.0±0.5Cm ) And Depth ( 6.0±0.5Cm ) . Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type • Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort • Tilt Tension Adjustment Can Be Operated In Seating Position • 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair • Seat / Back Tilting Ratio Of 1:2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated ( Dft 40 To 60 Micron ) Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cm Lumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustmentof 5.0±0.5Cmpneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm.Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter.As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Reception Counter Top Shall Be Of Rubberwood With Clean Matt Pu Finish 18 Mm Thick , Inside Radius - 700 Mm , Outside Radius - 1350 Mm And Depth - 650 Mm . Cork Shall Be 18 Mm Thick Of Rubber . Glass Shall Be Frostered 10 Mm Thick Diamond Cut Finishing On Edges , Inside Radius Shall Be - 1202.5 Mm , Otside Radius - 1402.5 Mm And Depth - 200 Mm . The Modesty Panel Shall Be Ms Perforated Sheet Below Worksurface : 0.8 Mm ( Thick ) X 665 Mm ( Height ) X 1345 Mm ( Flat Length ) . Above Worksurface : 0.8 Mm ( Thick ) X 260 Mm ( Height ) X 1345 Mm ( Flat Length ) . The Legs Shall Be Of Ms Tube 1.6 Mm Thick Diameter 50.8 Mm And Height 604 Mm Provision For 3 No. 5 / 15 Amp Switch / Sockets Along With 1 No. Lan Sockets Should Also Be There. As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Collaborative Seating Stools Drift’S Flat Top And Round Edge Supports Freedom Of Movement • Its Wooden Base Should Be Attached With Castors And Can Be Moved Around In All Directions With Ease Width-445 Depth-445 Height -575 It Should Be Covered With Fabric As Per Approval Of Engineer In Charge As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Conference Table 1. Furniture Top:- The Material Of Working Surface Shall Be Made Of Alumina Tri-Hydrate And Acrylic Resin Material Supported On Minimum 12 Mm Thick Mdf Base With Molded Polyurethane Edge.The Top Finish Shall Be Fire Retardant, Water, Resistant And Scratch Resistant And Shall Have High Hardness. Induction Charging Shall Be Provided On Furniture Top For Fsc Every User. 2. The Manufacture Shall Be Fsc Certified. 3. The Under Structure Shall Be Made Up Of 18 Mm Thick Mdf Board With 2 Mm Thick Pvc Edge Banding Tape. 4. Accessories: Flap 5. Cable Trays And Wiring:- The Furniture Must Be Designed With Cable Trays To Alllow For Continuous & Concealed Cable Management Across The Furniture. Approximate Minimum Dimensions Of Table - 5000 ( W ) X 2500 ( D ) X 750 ( H ) Provision For 3 Set Of3 No. 5 / 15 Amp Switch / Sockets Along With 1 No. Lan Sockets Should Also Be There Including Supply & Provision Of Connector For Laptop Connectivity. The Breakup Of 2500Mm Is : 600Mm Table Width + 1300Mm Gap + 600Mm Table Width As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Manager Table 1800X2100x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top.Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top.Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Should Be 325 Mm. Drawers Should Have A Soft Closing & Anti Slam Mechanism. Handles Should Be Provided For Ease Of Opening. Pedestals Should Be Provided With Lock For Security. Provision For 3 Set Of5 / 15 Amp Switch / Sockets Along With 1 No. Lan Sockets Should Also Be There Including Supply & Provision Of Connector For Laptop Connectivity. As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Oftable Work Surface:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Soft Closing Access Flap Provided For Access To Power Supply And Audio Cables.Work Top Is Available In Two Shapes Square And Pebble ( Round ) .Side Panel:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990 Matching To The Worktop, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Cutout With Gromet Provided For Routing Cables In Case Any Audio Visual Equipment Is To Be Fixed Later.Understructure:The Under-Structure Consists Of An Inner Tube Assembly With Top For Worktop Mounting And Base Plate With Levellers. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steelplates ( Hr ) ( As Per Is: 2062 ) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) . The Inner Tube Assembly Is Made Of 25.4Mmx 25.4Mm X 1.2Mm Thk Round Electric Resistant Welded Tube ( Erw ) ( As Per Is:7138 ) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) . Table Top Should Be 1Mtr By 1Mtr. As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq , Supply & Installation Of Center Unit For Sofa Overall Size : Width : 118Cm Depth : 60Cm Height : 45Cmtable Meterials & Size :Top:Sheesham 18 Mm Legs: 80X80 Top Side 40X40 Bottom Side Support 45X25mm & 8 Pcs Bolt & Nut Length : 1.1 Mtr. As Per Sketch / Drawing Matching With Photographs As Attached In Rfp Boq

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	11-11-2021	Revised Specific Requirements	Technical Bid	18-11-2021
2	11-11-2021	Date Extend	Date	18-11-2021

INR 1000 /-

INR 100000.0 /-

INR 50 Lakhs /-