Repair / Maintenance To Hangars And Manually Operated Hangar Gates / Doors At Various Location Near Atc Complex Under Ge ( Af ) Tech Area Agra.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
06 Dec 2021
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE (AF) TECH AREA AGRA → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Maintenance To Hangars And Manually Operated Hangar Gates / Doors At Various Location Near Atc Complex Under Ge ( Af ) Tech Area Agra.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Nov-2021 | Corrigendium | BOQ | 29-Nov-2021 |
| 2 | 29-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Dec-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantiling of plain or corrugated steel sheeting any gauge, thickness ofroof coverings complete all as specified and as directed. |
| 2 | Dismantling of wrought iron or mild steel of any description at any position not otherwise provided for complete all as specified and as directed. |
| 3 | S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in wind ties for roof including securing bolts etc including all necessary cutting and welding for similar work complete all as specified and as directed. |
| 4 | S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plate , rails, bracess etc, drilling for fixing of steel sheets or other covering including distance pieces work confirming to Fe- 410-W (Gde -E-250) quality A complete all as specified and as directed. |
| 5 | S&F plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 6 | S&FPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering ridge/velly gutturs etc, fixed with self tapping screws complete all as specified and as directed. |
| 8 | M&L for Galvanised, corrugated / semi corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed. |
| 9 | S&F Plain, 0.63mm thick galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 10 | M&L for preparation of new zinc/ galvanised suffaces to receive painting, by coating with mordant solution in cluding washing and cleaning, etc. of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 11 | Preparation of new iron or steel surfaces of any description, over 10cm in width or girth, when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 12 | M & L for prepararing old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 13 | Dismantling existing door frame / shutters of area exc 60 Sqm and n.exc 80 Sqm by hydraulic/ mechanical cranes other tools & plant, necessary scaffolding required for lowering down the shutters carefully without causing damage to other components of hangars for repairing work and re-fixing the door shutters in same position after necessary repairs complete all as specified and as directed.Note :- (a)Damages if any, caused due to poor workmanship shall be made good by the contractor at his own cost to match with the existing complete without any extra cost to the department.(b)Proper record of the hangar doors repaired with respect to its location and repairs carred out duly signed by all concern shall be maintained by the Engr-in-Charge and shall be produced to GE on demand. |
| 14 | S&F structural steel framed work such as grills gratings / cattle trap / trolley gate / railings / rails etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings frame work of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and as directed. |
| 15 | Fixing/fabrication only structural steel framed work such as grills gratings / cattle trap / trolley gate / railings / rails etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings frame work of water tanks and similar work conforming to Fe 290 Grade E-165 in any position such as in cemet concrete and embedding the same in plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and as directed. |
| 16 | S&F bottom wheel made up of mild steel IS 2062Fe 410 of 250 mm dia and 81-90 mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardning, nurling, fixing only roller bearings (qty 02 Nos) and other fittings etc complete and all as specified and all as directed. |
| 17 | S&F bottom wheel made up of mild steel IS 2062Fe 410 of 150 mm dia 60 - 70 mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardning, nurling, fixing only roller bearings (qty 02 Nos) and other fittings etc complete and all as specified and all as directed. |
| 18 | S&F bottom wheel made up of mild steel IS 2062Fe 410 of200 mm dia 71 - 80 mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardning, nurling, fixing only roller bearings (qty 02 Nos) and other fittings etc allcomplete and all as directed. |
| 19 | S&F top wheel made up of taplon / cast iron wheel, including fixing only of ball bearings 02 Nos circlips, 01 No shaft of dia 25 mmx 120 mm long or size as per required at site , including necessry welding, drilling and other fittings etc allcomplete and all as specified and as directed. |
| 20 | Supply and fixing gears system suitable for gate complete all as specified and as directed. |
| 21 | Supply only MS Chain of size 20 mm and 3.50 mtr long complete all as specified and as directed. |
| 22 | Supply and fixing Bottom spocket attached wheel 250 mm dia complete all as specified and as directed. |
| 23 | Supply and fixing Bottom spocket attached wheel 150 mm dia complete all as specified and as directed. |
| 24 | Supply and fixing Bottom spocket attached wheel 200 mm dia complete all as specified and as directed. |
| 25 | Supply and fixing Ball bearing roller of make SKF of size 100 x 60 mm, or size as per site requirement complete all as specified and as directed.. |
| 26 | Supply and fixing Gear Shaft of 50 mm dia and 450 mm long of EN 19 complete all as specified and as directed. |
| 27 | Supply and fixing MS flat iron handle of500 mm long suitable for operating door shutters complete all as specified and as directed. |
| 28 | S & F in repairs Steel rolling shutters of laths thickness 1.00 mm , gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual typecomplete all as specified and as directed. |
| 29 | S & F Nylon Netfor Bird proofing for shed / storage accn withand included wooden fillets / aluminium strip, upto 15 mtr height, fixedas per under mentioned details complete all as specified and as directed :- (i) Burst strength up to 44 pound(ii) Shall meet ISO 1806 Protocols(iii) Size of mesh 20 mm x 20 mm.(iv) Thickness 0.071 inch( 6 strand each .012 inch)(v) Quality control:- Filament are twisted and knotted pressure, stretched and tightened.(vi) Break strength: 52 lbs / 2316 Kg per strand(vii) Chemical Properties:- Polyethylene ( a paraffin hydrocarbon, chemically inert, flame retardant and highly resistant to most chemical at temperature. High resistance to acids and alkaloids at all concentration.(viii) High temperature 210 to 239 degree F (100 to 115 Degree centigrade.(ix) Low temperature resistance 139 to 166 Degree F (-95 to -11 degree Centigrade) Make:- As approved by the GE after checking above parameters from manufacturers test certificate.Notewooden fillets for fixing of mesh will be measured & paid separately. |
| 30 | S&F in repair of galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of operture 1.18mm and fixed with tinned tacks or galvanished wire stapple/ aluminium fillet , at height upto 15.0 mtr complete all as specified and as directed. |
| 31 | S&F anodised aluminium fillets / frame work of any size and any thickness (wt n. less than 200 gm / RM ), for fixing of wiremesh , at height upto 15 mtr,jointingcleats, screws dash fasteners, plugs for fixing with walls / ceilling etc complete all as apecified and as directed. |
| 32 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specially provided for, all as specified and as directed. |
| 33 | Supply and laying dry clean sand spreading, levelling in layers 10mm thick consolidated complete all as specified and as directed .Note : Sand for filling shall 1.18 mm single size and sandshall be pass 100% through 2.36mm sieve and shall be 100% retain on 600 micron sieve. |
| 34 | M & L for Polythene film (transparent colour) in single layer of 400 micron thickness, virgin quality as per ASTM D2103/IS 2508 laid over sand layer with side and end overlapping not less than 150mm complete all as specified and as directed. Note:- (a) Measurement shall be taken for net area and unit rate quoted shall deemed to include for over lapping. (b):- Sand layer will be measured and paid separately under relevant item of this schedule. |
| 35 | M&L for Pavment Quality cement concrete (PQC) work in pavemnt of flexural strength 44 kg/sqcm (lower control limit-LCL) in field using minimum 400kg of cement per cubic metre or as per design mix, mixed with and including traingular/ Non circular synthetic polyster fibre reinforcement @ 0.25% by weigth of cement, spread and compacted including necessary form work, finishing by brooming / belting, curing etc complete all as specified and as directed. Note:- (a) Construction joints / dummy joints (Contraction joints) and exponsion joints shall be measured and paid separately under respective items. (b) No price adjustment shall be applicable if excess quantity of cement than the minimum is used / approved based on mix design in the execution of work under this item. (d) Cost of admixtures . fibers to maintain as required by design mix shall be paid as supply only here in after. |
| 36 | Supply only polyster non circular / trangular synthetic fibers 6/12 mm long with circum circle diameter 30-35micron design for melting point 240 - 260 degree celcius an having specific gravity of 1.34 to 1.4 recon complete all as specified and as directed. |
| 37 | M&L for forming dummy joint, cutting 100mm deep with 3mm width as initial cutting and secondary cutting of 25mm deep from the top and 8mm wide using diamond cutter to accommodatepolyethylene backup sheet 12mm thick/backup rod of dia 25% more than width of joints, filled with polyethylene sealant (minimum depth of sealant abovepolythylene sheet shall be of 10mm) complying with BS5212, BS 4254 and EN 141875 - 2003 (for hydrolysis water resistance test) priming the sites, with minimum MAF ±30% (with 10 years performance guarantee) and applying masking tape on edges of joint to prevent accidental spilage of sealant and removing the masking tape after sealant is applied by mechanical means all as specified and as directed.Note : (a)The make of polyethylene rod shall be of brand \" DURAboard HD 100\" manufactured by M/S Supreme Industries Ltd or equivalent of makes listed here in before after (b) The polyethylene rod shall be of desired diameter having minimum density of 22 Kg/Cum and compression strength of 0.40 Kg /Sqm 25% greater than the joint width of white colour (c)Primer to be used before filling sealant(d)Edge shall be bevelled and jointed cut within 24 hours using diamond bit coutters of Bosch or equivalent used for cutting green concrete. |
| 38 | Tightening of screw bolts of any shape and size and in any position ( Vertival / Horizontal ) in hangars of height upto 20.00 mtr , including washers etc complete all as specified and as directed. Note:- Nut and bolt will be paid saperately under respected item here-in-after wherever replacement of nut and bolts are required. |
| 39 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, of any size complete all as specified and as directed. |
| 40 | M&L for preparation of old painted steel/ zinc / galvanised surfacesof any description over 10cm width or girth not otherwise described and applying one coat of Aluminium paint of any height complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Nov 29, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 29, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Dec 06, 2021
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 06, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender