Purchase Of Laboratory Equipment 1. POLYHOUSE Area (3 options): Size A: 300sq.m.Dimension: 30m x 10m x 4m :5.5m ( L x W x SH: CH) Size B: 250sq.m. Dimension: 25m x 10m x 4m :5.5m ( L x W x SH: CH) Size C: 200sq.m. Dimension: 20m x 10m x 4m :5.5m ( L x W x SH: CH) STRUCTURE: All galvanized steel is used and design as per IS875 standards to take withstand of wind speed 120 km. /hour. End wall and side wall framing Aluminium corner trims, aluminium ridge bar and Galvanized gutter trim Brackets & fasteners as required to assemble frame. a) Columns: 80mm × 50 mm in 2mm thick hot dip galvanized pipe. b) Trusses: Bottom cord 42mm x 1.8mm; Truss Members 32mm x 1.8mm; Bracing 25mm, pipe; structural member will be fitted with zinc plated nuts & bolts without welding. c) Purlins: 38mm × 38mm x 1.8mm/42 x 1.8mm mm thick. Nuts and other metallic parts: This includes all the elements required for joining and water tighten components (such as fittings, clamps, screws and nuts plated against corrosion). DOUBLE DOOR ROOM: Double Door Room- of size 2.1m x 2.1m x 2.43m (L ×W×H) covered with 200 micronpoly film. Sliding Door – Double door size: 1.9m × 0.91m long & wide, normally lockable made with clear 6mm polycarbonate glazing, top & bottom tracks, jambs, flashings & installation hardware - 2 nos. CLADDING: Attaching the Plastic on Roof & Side walls, of Poly house & Double Door Room.200 micron UV stabilized poly film having 85% light transmission, multi-layered, anti-drip. This is attached with the structure by the spring & GRP profile & GRP clamps which click into it. SHADINGSYSTEM: By 50% UV stabilized agro shading net, green in color, movable with manual rolling system will be provided. COOLING SYSTEM: Cooling Pad Size: 1.5mH × 9.6mW ×100mm thick evaporative CELDEC cooling pad complete with All necessary framing material of Aluminum required supporting distribution & returning piping with suitable water tank & pump. Axial Flow Fan: 36 single speed belt driven exhaust fan 1 hp, 220V, 50 cycles, 1 phase) 20,000 CFM each. – 2 Nos. FOGGING SYSTEM: Fogging System 1.5HP heavy duty motor with screen filter, fogging nozzles, pipes, polymer water tank. CONTROL PANEL FOR AUTOMATION: Microclimate Control Panel for Temp. & Humidity controller with Piltz timer and manual operating option and, volt meter, RYB indicator etc. Technical feature of Temperature Control System • Accuracy: ±1°C. • Hysteresis: 0.4°C with sensor probe Pt-100 Sensor • Humidity controller with Piltz timer CIVIL WORK: A) Foundation wall for all sides of Poly house along with the double door room. Based 1’ below earth’s surface, 1.5.’ above earth’s surface, as kick-board 9” wide. Frame base block height 2’. B) Floor: Natural Soil ELECTRICAL WIRING: All wires will be of copper and desired load (Make-Havells/Finolex). Each feature has own electric line with MCB and will be underground in PVC pipe complete set with A grade work. Separate electrical work, panel board and main switches as well. GREENHOUSE Area (3 options): Size A: 300sq.m. Dimension: 30m x 10m x 4m :5.5m ( L x W x SH: CH) Size B: 250sq.m. Dimension: 25m x 10m x 4m :5.5m ( L x W x SH: CH) Size C: 200sq.m. Dimension: 20m x 10m x 4m :5.5m ( L x W x SH: CH) STRUCTURE: All galvanized steel is used and design as per IS875 standards to take withstand of wind speed 120 km. /hour. End wall and side wall framing Aluminum corner trims, aluminum ridge bar and Galvanized gutter trim Brackets & fasteners as required to assemble frame. a) Columns: 80mm × 50mm in 2mm thick hot dip galvanized pipe. b) Trusses: Bottom cord 42mm x 1.8mm; Truss Members 32mm x 1.8mm; Bracing 25mm, pipe; structural member will be fitted with zinc plated nuts & bolts without welding. c) Purlins: 38mm × 38mm x 1.8mm/42 x 1.8mm mm thick. Nuts and other metallic parts: This includes all the elements required for joining and water tighten components (such as fittings, clamps, screws and nuts plated against corrosion). DOUBLE DOOR ROOM: Double Door Room- of size 2.1m x 2.1m x 2.43m (L ×W×H) covered with 6mm thick polycarbonate sheet. Sliding Door – Double door size: 1.9m × 0.91m long & wide, normally lockable made with clear 6mm polycarbonate glazing, top & bottom tracks, jambs, flashings & installation hardware - 2 nos. CLADDING: Roof, front wall, end wall, & sidewalls of the Greenhouse-sets and double room for rigid covering with6mm thick clear multiwall polycarbonate sheet, Aluminum Profile, EPDM gasket, Silicon sealant, and accessories. SHADINGSYSTEM: External Shading:70:30% agro shade net, with manually rolling arrangement in the Greenhouse. Internal Shading: by aluminium 50% thermal Screen with motorized rolling arrangement. LIGHT: Photosynthesis active radiation lamp (PAR Lamp) are specific action spectra lamps for photosynthesis 250 watts – 15 Nos. HEATING SYSTEM: Biotech Heat Convector Great, By electric heat convector gerat system 2.5 KW. Complete uniform heat circulation system has been given in this heat, so that the heat can be blown in the complete area. Special heat convector gerat system for to maintain required temperature. – 10 Nos. COOLING SYSTEM: Cooling Pad Size: 1.5mH × 19.2mW ×100mm thick evaporative CELDEC cooling pad complete with All necessary framing material of Aluminum required supporting distribution & returning piping with suitable water tank & pump. Axial Flow Fan: 36 single speed belt driven exhaust fan 1 hp, 220V, 50 cycles, 1 phase) 20,000 CFM each.-04 Nos. FOGGING SYSTEM: Fogging System 1.5HP heavy duty motor with screen filter, fogging nozzles, pipes, polymer water tank. CONTROL PANEL FOR AUTOMATION: Microclimate Control Panel for Light, Temp. & Humidity controller with Piltz timer and manual operating option and, volt meter, RYB indicator etc. Technical feature of Temperature Control System • Accuracy: ±1°C. • Hysteresis: 0.4°C with sensor probe Pt-100 Sensor • Humidity controller with Piltz timer CIVIL WORK: A) Foundation wall for all sides of Greenhouse along with the double door room. Based 1’ below earth’s surface, 1.5.’ above earth’s surface, as kick-board 9” wide. Frame base block height 2’. B) Floor: Natural Soil ELECTRICAL WIRING: All wires will be of copper and desired load (Make-Havells/Finolex). Each feature has own electric line with MCB and will be underground in PVC pipe complete set with A grade work. Separate electrical work, panel board and main switches as well. MIST CHAMBER Area (3 options): SizeA: 200sq.m. Dimension: 20m x 10m x 4m :5.5m ( L x W x SH: CH) SizeB: 150sq.m. Dimension: 15m x 10m x 4m :5.5m ( L x W x SH: CH) Size C: 108sq.m. Dimension: 12m x 9m x 4m :5.5m ( L x W x SH: CH) STRUCTURE: All galvanized steel is used and design as per IS875 standards to take withstand of wind speed 120 km./hour. End wall and side wall framing Aluminum corner trims, aluminum ridge bar and Galvanized gutter trim Brackets & fasteners as required to assemble frame. a) Columns: 80mm × 50mm in 2mm thick hot dip galvanized pipe. b) Trusses: Bottom cord 42mm x 1.8mm; Truss Members 32mm x 1.8mm; Bracing 25mm, pipe; structural member will be fitted with zinc plated nuts & bolts without welding. c) Purlins: 38mm × 38mm x 1.8mm/42 x 1.8mm mm thick. Nuts and other metallic parts: This includes all the elements required for joining and water tighten components (such as fittings, clamps, screws and nuts plated against corrosion). DOUBLE DOOR ROOM: Double door room- of size 2.1m x 2.1m x 2.43m (L ×W×H) covered with 6mm thick polycarbonate sheet. Sliding Door – Double door size: 1.9m × 0.91m long & wide, normally lockable made with clear 6mm polycarbonate glazing, top & bottom tracks, jambs, flashings & installation hardware - 2 nos. CLADDING: Roof, front wall, end wall, & sidewalls of the Greenhouse-sets and double room for rigid covering with6mm thick clear multiwall polycarbonate sheet, Aluminum Profile, EPDM gasket, Silicon sealant, and accessories. SHADINGSYSTEM: External Shading:70:30% shade net, with manually rolling arrangement in the GreenhouseLIGHT: Photosynthesis active radiation lamp (PAR Lamp) are specific action spectra lamps for photosynthesis 250 watts – 10 Nos. HEATING SYSTEM: Biotech Heat Convector Great, By electric heat convector gerat system 2.5 KW. Complete uniform heat circulation system has been given in this heat, so that the heat can be blown in the complete area. Special heat convector gerat system for to maintain required temperature-8Nos. COOLING SYSTEM: Cooling Pad Size: 1.5mH × 19.2mW ×100mm thick evaporative CELDEC cooling pad complete with All necessary framing material of Aluminum required supporting distribution & returning piping with suitable water tank & pump. Axial Flow Fan: 36 single speed belt driven exhaust fan 1 hp, 220V, 50 cycles, 1 phase) 20,000 CFM each. – 14Nos. FOGGING SYSTEM: Fogging System 1.5HP heavy duty motor with screen filter, fogging nozzles, pipes, polymer water tank. CONTROL PANEL FOR AUTOMATION: Microclimate Control Panel for Light, Temp. & Humidity controller with Piltz timer and manual operating option and, volt meter, RYB indicator etc. Technical feature of Temperature Control System • Accuracy: ±1°C. • Hysteresis: 0.4°C with sensor probe Pt-100 Sensor. • Humidity controller with Piltz timer. CIVIL WORK: A) Foundation wall for all sides of Greenhouse along with the double door room. Based 1’ below earth’s surface, 1.5.’ above earth’s surface, as kick-board 9” wide. Frame base block height 2’. B) Floor: Anti-slippery Tiles. ELECTRICAL WIRING: All wires will be of copper and desired load (Make-Havells/Finolex). Each feature has own electric line with MCB and will be underground in PVC pipe complete set with A grade work. Separate electrical work, panel board and main switches as well. IRRIGATION FACILITY/ WATER SUPPLY FACILITY (for Nursery, Green House and Poly House) (i) Overhead Water tank (approx. height- 5m; structure-concrete or Iron/steel; capacity- 1000Lx2 or 2000Lx1 with water pump (2-5hp) (ii) Ground Water source (Well) with water pump (2-5hp), (iii) Pipes and sprinklers in Nursery, green house, mist chamber and poly house 5 SEED GERMINATOR/ SEED STORAGE (i) SEED GERMINATOR with 4KVA stabilizer(CVT) Capacity/Chamber Volume1200 Litres Interior dimensions (w x d x h)1310mm x 675mm x 1410mm Exterior dimensions (w x d x h)1440mm x 810mm x 1975mm Construction External Epoxy powder coated MS sheets Internal High grade SS 304 stainless steel Temperature range5°C to 60°C Temperature sensitivity+0.5°C Humidity range35-80%RH Humidity sensitivity±1%RH Temperature sensorPT-100 Water reservoir18 L Water quality Distilled/ ionized Shelves Standard 3 Temperature controller Solid State digital Controller/ PID optional Solid State digital Controller/ PID optional Display LED/LCD display accuracy0.5% full scale Connectivity RS 232/RS 422 port, Ethernet communications port Nominal voltage220-230V, 50 Hz, single phase Power requirements950W (ii) SEED STORAGE CHAMBER with 4KVA Stabilizer (CVT) Capacity/Chamber Volume 4000/ 8000/12000Litres (approx.) Electrical Connection 230V +-10%,50/60Hz Temperature Fluctuation with Time +-0.3 deg C Temperature +4 deg C Humidity 15%RH at +4 deg C 6 Refrigerator (4°C) with 4KVA stabilizer Capacity 600-700L Door Double side-by-side / French door type Temperature 4°C and Frost Free Ice maker Single or multiple chamber ice trays
