Tender For Sc/St Basti Fund Providing And Laying Rmc With Construction Of Sw Drain Of Remaining Work Of Gali No. 13 To 16 (Including Patli Gali) At Block 28-29, Vishwas Nagar (Ac-59). - 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 All kinds of soil. 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) 5 1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size) 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. 7 Thermo-Mechanically Treated bars of grade Fe-500 D or more. 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 9 Cement mortar 1:4 (1 cement : 4 coarse sand) 10 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. 11 Cement mortar 1:4 (1 cement : 4 coarse sand) 12 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 13 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 14 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) 15 Neat cement punning 16 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 17 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 18 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. 19 In cement mortar 20 Carriage of material by mechanical transport including loading, unloading and stacking 21 Lime, Moorum, Building rubbish 22 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. 23 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 24 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 25 H D - 20Circular shape 560 mm internal diameter 26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 27 Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 28 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 29 Desilting of Nallah/drain in running flow and under foul condition for depth not exceeding 1.5 meter including removal of stones, bricks, brick bats, garbage, sill, mud polythene sewage if andy etc and diversion of flow of sludge if required and removing the same away from cluster at the place as directed Engineer-in-charge. Disposed silt to be leveled and neatly dressed. 30 Providing and laying dry brick aggregate 40 mm nominla size in foundation & plinth or under floors at all levels including spreading and ramming in layers as directed by Engineer in charge. 31 Dedcut for not providing using screet board vibrator, vacum dwatring, process and fianlly finished by floating bromming with wire brushes etc complet as per specifications and direction of Engineer-in-charge in providing and laying CC pavement of Mix- M-25 with ready mixed concrete from batching plant. 32 Supply of earth and banking the same in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with half tonne roller or wooden or steel rammers and dressing up in embankments for roads, flood banks, guide banks and filling of ground depressions with all lead, lift etc. complete. 33 Provinding & fixing non asbestos multi purpose fibre cement board strips in joints of cement concrete pavements 50 mm + 5 mm wide and 6 mm thick having normal length not less than 90 cm. 34 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 35 Lettering with black Japan paint of approved brand and manufacture 36 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 37 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works 38 Excavating holes more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto1.5 m. All kinds of soil. 39 Supply of malba/building rubbish and banking the same in layers not exceeding 20cm in depth including breaking clods watering rolling each deposited layer with 1/2 tonne roller or wooden or steel rammer and dressing up in ebankments for roads flood banks guide banks or filling or ground depression with all leads lifts etc. complete. 40 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 41 Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in:Cement mortar 1:4(1 cement : 4 coarse sand) 42 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) 43 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)) 44 Add 35.22% on cost index excluding Item No. 27 to 29 45 Less 09.50% on cost index excluding Item No. 27 to 29
