Construction Of Vision Care Centre At Chc, Sinapali For The Year 2021-22.
Tender Value
8.85 Lakhs
Estimated cost
Bid Submission
22 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khariar → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Vision Care Centre At Chc, Sinapali For The Year 2021-22.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKEarth Work in excavation of foundation in hard soilwithin initial lead & lift with carriage by mechanicle means including rough dressing & breaking clods to minimum 5cm to 7cm & laying in layers not exceeding 0.3m in depth for filling raincuts & depression including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with good coarse river sand free from organic materials of approved wuality to required level and to required compacted thickness including watering to complete saturation,ramming complete with all leads and lifts includingcost, conveyance of water and cost of all labour,T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 3 | Providing Cement concrete of proportion (1:3:6) in foundation and floors using 4 cmsize clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15 cm [6”] thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalties and all labour with T & P required for the work etc. complete including dewatering if required. |
| 4 | Fly ash Bricks in cement mortar (1:6) in Foundation & Plinth having crushing strength not less than 73.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary including watering and curing for seven days with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc complete and as per direction of Engineer-in-charge. |
| 5 | Fly ash Bricks in cement mortar (1:6) in super structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary including watering and curing for seven days with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc complete and as per direction of Engineer-in-charge. |
| 6 | R.C.C.work of Grade M-20 having minimum compressive strength in work test of 200kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 20mm down graded size black crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, lowering & laying concrete & compacting by using vibrators, watering & curing for 4 (four) weeks centring, shuttering & finishingthe exposed surface smooth providing grooves or beads where necessary including cost & conveyance royalties & taxes of all materials & labour required for thework etc., complete in all respect but excluding cost & conveyance of M.S.Rods,HYSD bars or tor steel and binding wires of 18 to 20 gauge & labour charges for straightening, cutting, bending etc.,of the M.S.Rods, HYSD bars or torsteel & binding wires & laying the grills placing in proper position as per direction of Engineer-in-Charge.Column base Footing |
| 7 | Plinth Beam |
| 8 | Column in Superstructure |
| 9 | Lintel |
| 10 | Chajja |
| 11 | Roof beam |
| 12 | Roof Slab |
| 13 | Supplying,Placing & conveying for (HYSD UNCOATED BAR) M.S. reinforcement for RCC works including cutting,bending,binding and tyinggrills and placing in position including cost,conveyance as required for the site of work with all leads ,lifts,delifts and as per specifiction and direction of the Engineer-in-charge. |
| 14 | Supplying ,fitting and fixing of M.S.Doors, Windows, Grill Gate ,Angle/Shutter & Ventilators etc. to windows and openings and making holesin walls R.C.C. structure and wook work etc. and making good to the damages to walls of R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black broken granite stone chips of 12 mm to 20 mm (1/2” to 3/4\") (20 mm not to exceed 25%) with cost and conveyance of all materials labor taxes and royalities with all T & P etc. complete in all floors.MS Grill Window |
| 15 | MS Door |
| 16 | Ventilator |
| 17 | 2.5 cm.(1\"\") thick grading concrete(1:2:2) over roof slab after chipping and cleaning the surfaces by wire brushing laid to proper slope finished smooth including watering, curing, cost, conveyance of all materials such as 6mm size black hard granite crusher broken chips, sand, cement etc. and labour with T& P required for the work with all taxes and royalities etc. complete in all respect . |
| 18 | 12 mm thickcement plaster (1:6) to ceiling inincluding racking out joints finishing smooth with proper plumb and line watering curing for seven days with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc complete and as per direction of Engineer-in-charge. |
| 19 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 20 | Painting one coat ofpriming of approved shade including all cost of labour, paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge. |
| 21 | Finishing wallsurface with two coats weather coat over a coat of Primer including all cost of paint watering and curing cost conveyance and taxes of all materials and labour with T & P required for the work etc. complete in all floors . |
| 22 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth andeven surface to received painting including cost of scaffording staging charges with cost of all materials. |
| 23 | Painting two coats with plastic emulation paintof approved shade by means of brush after cleaning the surface including watering and curing etc. complete using weather paint to be supplied by the contractor of his own cost, including costpaint and all materials with all taxes, royalty, labour and T&P required for the work etc. complete. |
| 24 | Propviding fiting fixing of alumina window sliding made up allumina section-9778 as windows frame , section no 4095, 4096 and 9777, 3994 as shutter frame with 5 mm thick black glass as pannel fitted with ruber beading Aluminium Section/5mm thick Black glass |
| 25 | Propviding fiting fixing of alumina Door with OEL anodised alumina door section of 9202 as buttom and middle member and 12 mm thick prelaminated Aluminium Section/5mm thick Black glass |
| 26 | Painting two coats of enamel paint over a coat of Primingon new or old wood/iron work including all cost of labour, paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge. |
| 27 | Fixing tile in floors and Wall with Virtified tileson 25mm thick bed of cement mortar (1:1) joined with neat cement slury mixed with pigment to match the shades of the tile including cost of tile & rubbing and polishing etc. complete. |
| 28 | Providing fitting and fixing of Gypsm board ceeling with aluminium frames including cost, Conveyance, Labour ,T&P etc. complete |
| 29 | EI WORK-Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R. PVC insulated single core multi strand copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with5/6Amp. 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FR pvc insulated S.C multistrand copper conductor as earth wire Including all accessories and connection.as per direction of Engineer-in-charge. (Make of wire:- Finolex/Anchor/ Havells/HPL/L&T/ V.Guard).a)Group-A |
| 30 | b)Group-B |
| 31 | c) Group-C |
| 32 | Recessed wiring to 5/6A modular type socket outlet with 2x1.5mm2 PVCInsulated S.C F.R multistand Cu.wire ISI marked in 20mm dia non-metalic PVC flexible conduit pipe with modular type switch.a) Group-A |
| 33 | b) on existing board |
| 34 | Recessed wiring to modular type power plug point consisting of 16A modular shuttered socket and16A Indicator type switch with 2x4mm2 PVCInsulated S.C F.R multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with1x1.5mm2 F.R PVC insulated S.C Cu.wire for loop earthing as required.(Make of wire :-Finolex/Anchor/Havells /HPL/V.Guard ) |
| 35 | Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havells/HPL/L&T/ V.Guard).1x1.5mm2 Sub-Main Wiring for Invertor connection. |
| 36 | a) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 37 | b) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 38 | c) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 39 | S/F of 8-Way double door Distribution Box with 1x32Amp DP MCB + 6x(10-16)Amp. SP MCB of Havels/HPL/L&T make. |
| 40 | S/F of Call bell/Buzzer and Bell push and flexible cord.(Sl.1.30 of SOR-2015) |
| 41 | S/F of 63Amp 240V.ICDP main switch ofSeimens/HPL/Havells/Anchor/L&T/ C&S make |
| 42 | S/F of 48\" AC Ceiling Fan complete without Regulator of brand Usha Allure /Bajaj Elegance make of white/Ivory colour. |
| 43 | S/F of Step type modular electronic fan regulator of Anchor/Cona make. |
| 44 | S/F of 2-Pole 63Amp Change over switch of Havells/HPL/L&T/any equivalent make. |
| 45 | S/F of 18watt LED Tube Light fitting of Philips/Bajaj/Havells make. |
| 46 | S/F of Computer Board consisting of 3 Nos of Modularplug and switch, all accessories including recessed wiring,Cutting of wall & connection as per requirement. |
| 47 | S/F of Modular Angle Holder of any ISI make. |
| 48 | S/F of10wt LED Bulb of Havells/HPL/Bajaj make. |
| 49 | S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.2-SOR-2015) |
| 50 | S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard . |
| 51 | S/F of 2 Core 10mm2 PVC Alluminium Armoured Cable ISI marked of Polycab/Havells/Nicco make |
| 52 | S/F of 25Watt LED Street Light fitting complete of Havells/Philips/Bajaj/HPL make. |
| 53 | S/F of G.I.bend pipe for street light including all accessories i.e.clamp or jam lock etc. |
| 54 | GPH WORK-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.20mm dia PVC ASTM pipe (sch-80)GroundFloor |
| 55 | 25mm dia PVC ASTM pipe (sch-80)GroundFloor |
| 56 | 32mm dia PVC ASTM pipe (sch-80) top floor |
| 57 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cockplaza make |
| 58 | 15mm dia CP short body bib cock plaza make |
| 59 | 15mm dia CP long body bib cockplaza make |
| 60 | 25mm dia brassfull way valve (Shakti make) |
| 61 | 15mm CP Extension piece |
| 62 | 125mm CP grating |
| 63 | 15mm size C.P. flange |
| 64 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge500 liters capacityPVC water storage tank with out staging |
| 65 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.Ground Floor |
| 66 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-chargeGround Floor |
| 67 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.First Floor |
| 68 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 69 | 75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 70 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 71 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 77 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 78 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 79 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) |
| 80 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeTowel ring |
| 81 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 82 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 83 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 84 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 85 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor |
| 86 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )Ceramic tile 30cmx30cm |
| 87 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.ground Floor |
| 88 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Glazed tile 30cmx45cm |
| 89 | Supplying fitting, fixing in position of approved design & drawing P.V.C shutter with choukath framed & fixed (wrought & put up) including cost, conveyance, royalties and other taxes of all materials, cost of all labor T&P required for the work etc. complete as per direction of the Engineer-In-Charge.- 2 x 0.75m x 1.95m= |
AI Tender Summary
Tender Timeline
Nov 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender