}

Vii/Rt1 Construction Of 20 Mtr Span Steel Bridge (Bailey) Over Gairee Khola In North Sikkim, North Sikkim-Sikkim

Pradhan Mantri Gram Sadak Yojana-PMGSY has published Vii/Rt1 Construction Of 20 Mtr Span Steel Bridge (Bailey) Over Gairee Khola In North Sikkim. Submission Date for this Tender is 12-11-2021. Bridge Work Tenders in North Sikkim Sikkim. Bidders can get complete Tender details and download the document.




Tender Notice

29806796
Vii/Rt1 Construction Of 20 Mtr Span Steel Bridge (Bailey) Over Gairee Khola In North Sikkim
Open Tender
Indian
Sikkim
North Sikkim
12-11-2021

Tender Details

Vii/Rt1 Construction Of 20 Mtr Span Steel Bridge (Bailey) Over Gairee Khola In North Sikkim

Key Value

Document Fees
INR 30000 /-
EMD
INR 423391.0 /-
Tender Value
INR 1.69 Crore /-

BOQ Items

Name of Work:(Gairee to U Gairee) Construction of 20 Mtr Span Steel Bridge over Gairee Khola in North Sikkim.
Sl. No. Item Description
1Construction of 20 Mtr Span Steel Bridge over Gairee Khola in North Sikkim.
2(ii) Excavation in Hilly Areas in Soil by mechanical means.
3(A) Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per drawing and Technical Specification Clause 1603.1
4Construction of Embankment with material obtained from Roadway cutting
5Construction of Embankment with approved material deposite at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical specification Clause 301.5
6Compacting Original Ground.
7(ii) Compacting original ground supporting subgrade.
8Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers for subgrade construction as per Technical Specification Clause 303.5.2.
9Granular Sub-Base with well graded material (Table 400.1)
10(A) By Mix in Place Method.
11Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in-place method with rotavator at OMC, and compacting with smooth wheeled roller to achieve the desired density, complete as per technical specification clause 401.
12(i) For Grading I Material.
13Water Bound Macadam with Crushable Screenings
14(2) WBM Grading 2
15Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
16(A) By manual means.
17(3) WBM Grading 3
18Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
19(A) By manual means.
20Prime Coat
21(i) Low porosity
22Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 1.2-1.5 kg/sqm using mechanical means as per Technical Specification Clause 502.
23Tack Coat
24(iii) Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with primer and cleaned with Hydraulic broom as per Technical Specification Clause 503.
2520mm thick Open-Graded Premix Carpet
2620 mm thick Open Graded Premix Carpet using Bitumen Emulsion as per Technical Specification Clause 508.2
27By ManualMeans
28Seal Coat
29Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510
30Type B(ii) Bitumen (S-65)
31Construction of earthen shoulder.
32Construction of subgrade and earthen shoulder with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compavted to meet requirement of table 300.2 with lead upto 1000m as per technical specification clause 303.1.
33Loading and unloading of Lime, Aggregates, Stone boulder,Brick Aggregates etc. by manual means
34i) Loading of aggregates
35ii) Loading of sand
36Loading and unloading of Lime, Aggregates, Stone boulder,Brick Aggregates etc. by Mechanical means
37iii) Unloading of aggregates
38iii) Unloading of sand
39Loading and unloading of Bitumen drums by manual means including a lead upto 30m
40i) Loadingof Bitumen drums by manual means including a lead upto 30m
41ii) Unloading of Bitumen drums by manual means including a lead upto 30m
42Haulage excluding Loading and Unloading
43Haulage of materials by tipper excluding cost of loading, unloading and stacking
44Case-I : Surfaced road
45a) Sandlead distance 60 Km
46b) Aggregates ad distance60 Km
47c) Bitumen ad distance 120 Km
48Case-III : Katcha Track
49a) Sandlead distance 15 Km
50b) Aggregates lead distance 15 Km
51c) Bitumen lead distance 0.0 Km
52Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps ,Dewatering,Shoring and shuttering and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.
53Ordinary soil
54Upto 3 m depth
553 m to 6 m depth
56Ordinary rock
57Hard rock (requiring blasting)
58Hard rock (blasting prohibited)
59Filling annular space around footing in rock as per technical specification Clause 1203.4.3.
60P.C.C grade M 15 (Nominal mix 1:2.5:5)
61Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203
62P.C.C grade M 15
63Nominal mix (1:2.5:5)
64R.C.C. grade M 30
65Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
66Sub Structure
67Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204
68For height upto 5 m
69R.C.C. grade M30
70For height5 to 10 m
71For height above 10 m
72Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
73Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
74Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
75Granular material
76Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smallersize towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specificationClause 1204.3.8
77Supplying,fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel complete including all accessories as per drawing and Technical Specifications and BS: 5400, section 9.1 & 9.2 (for PTFE) and clause 2004 of MoRTH Specifications.
78Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) Section IX complete, including all accessories as per drawings and technical specification Clause 1207.1
79Super Structure
80Providing Bailey Bridge Complete Set as per Bailey Bridge Speecification
81P.C.C. M 15 ordinary grade (1:2.5:5) levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211
82Nominal mix (1:2.5:5)
83Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211
84Providing and laying of an elastomeric slab seal expansion joint complete as per approved drawing and approved specifications to be installed by manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer’s instructions for installlation and as per technical specifications Clause 1207.2.5
85Filler Joint
86Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans, covered with sealant complete as per drawing and technical specifications
87River Bank Protection Work
88Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301
89For 2 m height of Gabion toe wall for Length of 20 m on both side of abutment wall
90Loadingof stone aggregates
91M15 grade concrete
92M25 grade concrete
93M30 grade concrete
94Bituminous Macadam
95Premix carpet
96Seal coat
97Unloading of stone aggregates
98M15 grade concrete
99M25 grade concrete
100M30 grade concrete
101Bituminous Macadam
102Premix carpet
103Seal coat
104Loading of sand
105M15 grade concrete
106M25 grade concrete
107M30 grade concrete
108Bituminous Macadam
109Seal coat
110Unloading of sand
111M15 grade concrete
112M25 grade concrete
113M30 grade concrete
114Bituminous Macadam
115Seal coat
116Loading of cementand stacking
117M15 grade concrete
118M25 grade concrete
119M30 grade concrete
120Unloading of cementand stacking
121M15 grade concrete
122M25 grade concrete
123M30 grade concrete
124Loading steeland stacking
125Unloading steeland stacking
126Loading Bitumen Drumsand stacking
127Bituminous Macadam
128Premix carpet
129Seal coat
130Unloading Bitumen Drums and stacking
131Bituminous Macadam
132Premix carpet
133Seal coat
134Cost of Haulage Excluding Loading and Unloading
135Surfaced Road
136a) Cement lead distance 120 Km
137b) Stone Aggregates lead distance 60 Km
138c) Sand lead distance 60 Km
139d) Steel lead distance 120 Km
140e) Bitumen lead distance 120 Km
141Unsurfaceroad
142a) Cement lead distance 0.0 Km
143b) Stone Aggregates lead distance 15 Km
144c) Sand lead distance 15 Km
145d) Steel lead distance 0.0 Km
146e) Bitumen lead distance 0.0 Km
147GST 12% on Civil Works
148Labour Cess 1%
149GST on Steel parts 18%
150Labour Cess 1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail