Public Works Department-PWD has published Repairing Of Water Circulating Pumps At Gandhi Nagar, Jaipur. Repairing Of Water Circulating Pumps At Gandhi Nagar, Jaipur.. Submission Date for this Tender is 10-11-2021. Pump repair and Maintenance Tenders in Gandhi Nagar Jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying and Laying ISI marked P.V.C. insulated submersible cable as per PWD specification for electrical Worksconfirming to IS:694 and as per IS 8130 : 2013 of 1.1 kV grade .Wire should be made from99.99% purity copper, class 5 stranding in acc. to IEC 60228 forlower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4 including making connection etc. as required.OEM Must have its own in house NABL lab setup for all testing facilities for wires. All as per pre approved by Engineer in charge, making connections.For additional technical parameters of products/ work, referAnnexure "A" attached with this BSR . |
| 2 | 2.5 Sq.mm 3 core flat / Round |
| 3 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: |
| 4 | Exposed on wall |
| 5 | 20mm dia nominal bore |
| 6 | "B" Class |
| 7 | 25mm dia nominal bore |
| 8 | "B" Class |
| 9 | 32mm dia nominal bore |
| 10 | "B" Class |
| 11 | Rewinding of single phase motor of 1400 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire "E" class insulation material and testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 12 | 0.25 H.P.To 0.50 H.P. |
| 13 | 0.75 H.P.To1.0 H.P. |
| 14 | S & F of capacitor of 230V/ 275V, 50Hz rating of plastic casing and terminals -Lugs or copper wire. |
| 15 | Running capacitor |
| 16 | 10.0 micro farad |
| 17 | 15.0 micro farad |
| 18 | Rewinding of single phase/3phase submersible motor including all necessary material and of the same characteristics as original with required size of super enamelled wire "E" class insulation material and testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 19 | 2.0 H.P.to 3.0 HP |
| 20 | From7. 5 HP to 10.0 HP |
| 21 | Repairing of submersible pump of withreplacement of broken impellers ,diffuser,bush/bearing set , oil seal complete with testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 22 | 2.0 H.P.to 3.0 HP |
| 23 | From7. 5 HP to 10.0 HP |
| 24 | Providing & Fixing ofAC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 25 | 3 pole Power contactorswith following AC 3 Rating |
| 26 | 13 to 25 Amp |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
