Military Engineer Services-MES has published Provision Of Ht Ug Cable Networks And Connected Works At Fol Depot And Provision Of Lt Apfc Panel Connected Works At Hq 2 Corps And Comn Complex Under Ge ( Utility ) Ambala Cantt Provision Of Ht Ug Cable Networks And Connected Works At Fol Depot And Pro. Submission Date for this Tender is 22-11-2021. HT Cable Tenders in Ambala Cantt Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-11-2021 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in any type of soil and taking out of HT/UG cables/pipes, foundation of poles, locating fault of LT cable and stay assembly complete all as specified and as directed. |
| 2 | All as per item No. 1 above but excavation depth exceeding 1.5 metre and not exceeding 3.0 metre. |
| 3 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil of any description, complete, all as specified and as directed. |
| 4 | Removing excavated soil to a distance exc 100 mtr but not exceeding 250 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete, all as specified and as directed. |
| 5 | Material and labourSand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cmsdeep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- Punned thickness 18cm shall be measured for payment purposes. |
| 6 | Supplying and laying un-reinforced precast cement concrete cable cover, class HV, Type 1, with peak, size 300mm x 180 mm x 40 mm, complete all as specified and as directed. |
| 7 | Supply and laying sub class "B" bricks old sizes over the HT/LT cable laid flat with width equal to length of brick, laidperpendicular to the cable for protection complete all as specified and as directed. |
| 8 | Supply and errecting steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11.0 metres long) conforming to IS-1678 and including marking alternate 05 Nos white and black strip 30cm height with two coats ofsynthetic enamel paint includingpreparation of surfaces, upto 1.5 metre above the coping of pole, starting with black strip, including dismantling and taking down of old unserviceable steel tubular HT pole complete all as specified and directed. Note: Excavation and earth wok and PCC for foundation, channel, clamps nuts, bolts to be measured and paid separately. |
| 9 | Material and labour plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), for mass filling inpole pit and foundation complete, all as specified and as directed. |
| 10 | Material and labour plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates)for mass filling in stay pits and pole foundation, complete all as specified and as directed. |
| 11 | Material and labour brickwork, with subclass "B" bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 12 | Material and labour for 100mm thick PCC (1:2:4) type B-2, using 40mm graded stone aggregates, as in floor finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | Supply and fixing in replacement of GI tubing, 80mm bore, light grade, for cable protection along/on poles/culvert/drainage or under road crossing, complete, all as specified and as directed. |
| 14 | Material and labour in replacement of danger notice plate 1.60 mm thick of size 25x20 cm, mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size for HT, complete all as specified and as directed. |
| 15 | Supply, installing, testing and commissioning of air break gang operated triple switch (GODO) outdoor type, vertical mounting type of capacity 200 Amp with drop out fuse consisting 12 insulators, ISI marked mechanically operated, mounted on insulator and frame work with operating GI rods and mechanical work from ground level with locking arrangement including Godrej pad lock with two keys complete with fuse carrier and HT fuse element having upto 200 Amp rating suitable for HT 11 KV 50 HZ AC supply including necessary electric connection and dismantling and taking down of old unserviceable GOD complete all as specified and directed. |
| 16 | Material and labour in replacement of lightning arrester expulsion type, suitable for 11000 Volt, with allfittings, trasmission class,discharge capacity 65 KA including connecting with HT line and dismantling and taking down of old unserviceable lightning arrester complete all as specified and as directed. |
| 17 | Material and labour aluminium conductor steel reinforced (ACSR)weasel/squirrel conductor from 66 KV sub station and other areas, including fixing, stretching on poles and proper noseling with binding wire to insulator of any size on 11 KV OH line as required at site and dismantling and taking down of old unserviceable ACSR conductor complete all as specified directed. |
| 18 | Material and labour earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate not less than 1.5 m below normal ground level connectedwith GI earth strip of size 32x6 mm by means of nut, bolts, washers etc to eqpt/machinery all as shown in electric plate No 3 of SSR Pt I including PCC (1:3:6) pit, cover 50mm thick RCC 1:2:4 type B-1 using 8mm for steel bars @ 10 cm C/C both ways, 40 mm bore medium grade GI protection pipe, watering pipe 20 mm bore nedium grade , funnel, wire mesh, also including earth work, common salt, charcol dust ,including testing on completion complete all as specifiedand as directed. Note : The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire wesh and RCC cover. |
| 19 | Material and labour earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less than 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanised earth lead wire of 4.0 mm dia by means of GI nuts bolts, check nuts and washers and connected to earthing test point drawn through 15 mm dia GI pipe for protection of GI earth lead wire including 20mm dia GI pipe for watering GI funnel PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part - I including testing complete all as specified and directed. Note : The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire wesh and RCC cover. |
| 20 | Material and labour cross arm bracing supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling hole for bolts in any shape or size as indicated or directed including two coats of aluminium paint over a coat of red oxide primer complete, all as specified and as directed. |
| 21 | Supply and fixing pin type, porcelain,vitreous,white or brown or green insulators,11000 volts grade of 150 mm dia, 150 mm height including one galvanized mild steel spindle, two galvanised iron washers and one galvanized iron nuts and dismantling and taking down of old unserviceable insulators complete all as specified and as directed. |
| 22 | Supply and fixing disc type insulators, porcelain, vitreous 145 mm height and 255 mm dia ball and socket type, white, brownor green disc, "Two-in-series" assembly for tension with tension clamps for conductor, working pressure 11000 volts grade,and dismantling and taking down of old unserviceable insulators complete all as specified and as directed. |
| 23 | Material and labour Boring of holes under road, pavement, hard standing of any material and description,by trench less technology using ultra sound techniqueincluding providing HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete, all as specified and as directed. |
| 24 | Supply and fixing of stay assembly complete with all accessories such as stay plate 500mmx300mmx6mm,stay rod 20 mm dia and 215cm long threaded end with nuts including 14mm dia GIstay bow. turn buckle,etc. complete, all as shown in Electrical plate No 1 of SSR part I 2009 complete including dismantling and taking down of old unserviceable stay assembly all as specified and as directed. Note- The quoted rate shall include the cost of loop type insulator, stay clamps, excavation, PCC, stay wire, stay bow, turn buckle, nuts etc., excavation, demolition and removal of demolished concrete outside defence land complete. |
| 25 | Supplying and laying of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with aluminium conductor, 11000 Volts grade, cross sectional area 95 Sqmm 3 core, suitable for 11 KV earthed system confirming to IS 7098 Part - 2 for insulation and for conductors Class 2 to IS 8130 - 84, in trenches, floors, ducts passing through pipe forroad crossing etc.,complete all as specified and directed. |
| 26 | Supply, Laying and connecting including testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts cross sectional area 150 Sqmm 3.5 core grade laid in trenches, floors, ducts passing through pipe forroad crossing etc complete all as specified and directed. (Note : Excavation, earth work, brick protection, sand cushioning and GI pipe etc shall be measured & paid for separately). |
| 27 | Supply, Laying and connecting including testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts cross sectional area 95 Sqmm 3.5 core grade laid in trenches, floors, ducts passing through pipe forroad crossing etc complete all as specified and directed. (Note : Excavation, earth work, brick protection, sand cushioning and GI pipe etc shall be measured & paid for separately). |
| 28 | Supply, Laying and connecting including testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts cross sectional area 25 Sqmm 3.5 core grade laid in trenches, floors, ducts passing through pipe forroad crossing etc complete all as specified and directed. (Note : Excavation, earth work, brick protection, sand cushioning and GI pipe etc shall be measured & paid for separately). |
| 29 | Supply, Laying and connecting including testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts cross sectional area 120 Sqmm 3.5 core grade laid in trenches, floors, ducts passing through pipe forroad crossing etc complete all as specified and directed. (Note : Excavation, earth work, brick protection, sand cushioning and GI pipe etc shall be measured & paid for separately). |
| 30 | Supply, Laying and connecting including testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts cross sectional area 16 Sqmm 4 core grade laid in trenches, floors, ducts passing through pipe forroad crossing etc complete all as specified and directed. (Note : Excavation, earth work, brick protection, sand cushioning and GI pipe etc shall be measured & paid for separately). |
| 31 | Material and labour heat shrinkable end terminationjointing kit suitable for LT 1.1 KV (Earthed) grade cable outdoor type, complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 120 to 150 sqmm disconnecting and taking down of old unserviceable HT joint complete all as specified and as directed. |
| 32 | Material and labour heat shrinkable end terminationjointing kit suitable for LT 1.1 KV (Earthed) grade cable outdoor type, complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 95 sqmm disconnecting and taking down of old unserviceable HT joint complete all as specified and as directed. |
| 33 | Material and labour Cable jointing kit suitable for HT 11 KV (Earthed) grade cable outdoor end termination, Heat shrinkable type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm disconnecting and taking down of old unserviceable HT joint complete all as specified and as directed. |
| 34 | Supplying, fabrication, errecting , connecting, testing and commissoning of out door type cubical panel board of size 1.2mtrx0.9mtrx0.5mtr outer shell made out of3.15 mm thick MS sheet including door and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm aboveand 45 cm below the ground level,frame factory fabricated with front & back openable, double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keyshaving chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricatedhaving modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following :- |
| 35 | (a) TPN Copper bus bar 200 Amps insulated with colour coded heat shrinkable sleeve heavy duty and shall be mounted on suitable size “F” class insulators not less than 1.0 mtr long |
| 36 | (b) Incoming MCCB 160 Amps 4 pole 415 Volts 36 KA AC,Icu=100%Ics, having microprocessor based releasefor over current,short circuit & earth faultfront face isolation with positive break indication with double break contacts with spreader and phase barrier complete conforming to IS/IEC 60947-2. - 01 Nos |
| 37 | (c) Outgoing MCCB 100Amps 3 pole 415 Volts 36KA AC,Icu=100%Ics, having microprocessor based releasefor over current,short circuit & earth fault with front face isolation with positive break indication with double break contacts with spreader and phase barrier complete conforming to IS/IEC 60947-2. - 02 Nos |
| 38 | (d)Outgoing MCCB 63Amps 3 pole 415 Volts 36KA AC,Icu=100%Ics, having microprocessor based releasefor over current,short circuit & earth fault with front face isolation with positive break indication with double break contacts with spreader and phase barrier complete conforming to IS/IEC 60947-2. - 3 Nos |
| 39 | (e) MCB SP 32 Amps-05 Nos |
| 40 | (f) Digital Ammeter 0-400 A of size 96sqmm with selector switch - 01 No. |
| 41 | (g) Digital Volt meter 0-500 V of size 96sqmm with selector switch - 01 No |
| 42 | (h) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder-01 set of three. |
| 43 | (j) CT Coils of suitable ratio-01 Set. |
| 44 | Notes :- (i)The quoted rate shall includes minor items such as lugs, nuts & bolts, washers, top insulators, sleeves,link spreater provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming toIS-694. (iii) Panel drawing shall be got approved from accepting officer before placing of orderfrom Engr-in-Charge/GE. (iv)The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (vi) The Panel shall be surrounded with 9 inch brick wall upto 0.5 mtr height all around the panel and blank portion between panel and wall shall be filled with PCC 1:2:4including masonary work leaving ducts for cables complete all as specified anddirected. |
| 45 | Supply only only MS galvanisd chain link fencing of any size as directed and confirming to IS:2712-2003, IS 280:2006 and IS 4826 , including straining bolts ,bending wire complete all as specified and directed. |
| 46 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed. |
| 47 | Supply and fixing Mild steel flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe 410-0 or Fe 250-E complete all as specified and directed. |
| 48 | Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , cutting, drilling & welding, conforming to GDE Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 49 | Supply and fixing hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balustrers running bars, for doors, balusters, noising to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron , fillets (for securing wire mesh etc) including all necessary drilling, bolting, or riveting etc and similar work conforming to Fe-290 Gde E-165 etc, wind ties for roof including inclusive of one primer coat of red oxide primer and two coats of aluminium paint complete all as specified and directed. |
| 50 | Supply and fixing brick work using sub class "B" bricks straight or curved on plan exc 6 mtr mean radious, built in CM 1:6 and pointed flush as the work proceeds, including demolation of old bricks in lime/cement mortar complete all as specified and as directed. |
| 51 | Supply and filling Hard core with broken bricks of gauge not exceeding 63mm deposited spread and levelled in layers not exc 30cm thick each layer, watered and rammed to a true surfacecomplete all as specified and as directed. |
| 52 | Material and labour for 10 mm thick rendering using cement morter 1:6 on fair surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 53 | Material and labour anti climping device , spikes type fabricated from MS bars (round, suquare and flat) comprising 2.24 mm dia galvanised steel 2-strand barbed wire with 2.00 mm dia barbs wrapped spirally round poles, to a length of 0.5 to 1.0 meter clamped and property secured or as orded (clamps meassured separetly) complete all as specified and directed. |
| 54 | Taking down old unserviciable board and supply and fixing of Retro reflective sign board of size 600mm x 750mm made of ACP sheet of 3mm thick ACP sheet shall be fixed on MS frame with legs of MS angle section 35mm X 35mm X 4mm grouted in PCC 1:3:6 type C-1, 750mm above the ground level and 600mm below the ground level. The background of board to be provided with green colour, letters and border with white retro reflective tape. Same description shall be mentioned on both sides of ACP sheet complete all as specified and directed. NOTE:- (i) Excavation, earth work, PCC, nuts, bolts, fasners, paint on MS frame and legs shall be included in quoted rates by contractor.(ii) The size of letters and description shall be all as per sample approved by Engr-in-Charge. |
| 55 | Material & Labour forauguring of hole of suitable dia under exisitingRailway trackAmbala Cantt Railway Station onUMB RPJ(Ambala Cantt- ) Railway Section and providing heavy duty HDPE pipe of size 100mm dia in true horizontal drill complete all as specified and directed. Note : (i) The auguring of horizontal hole will be carried out through trenchless horizintal boring machine. (ii)The boring shall be carried out 3 meter deep below the railway track level (iii)During carrying out the work below railway trackthe contractor shalladhere to the instructions issue and to the followed by the respective authorities.The work will be carried out under the supervision of MES and Railway authorities. (iv)Any damage to the existing property like sewage, pipes, cables, water pipes etc of all the authorities will be repaired to the entre satisfaction of respective authorities without any extra cost Department in no way will be responsible for such damages. (v)The quoted rate shallinclude all the above and excavation, working space for trenchless boring HDPE pipe, machinary, transportation, DG set labour charge etc complete and nothing extra is admissble on this account. |
| 56 | Dismanting and taking down of transformer and shifting oftransformer of capacity200 KVA from pole using crain/lift, tools and plants as necessary and installing/mounting on plinth including testing and commissioning of transformer complete all as specified and directed. |
| 57 | Supply, installation, testing and commissioning outdoor type LT feeder pillar. panel size 1.2mtr x 1.0mtr x 50Cm with out door type cubical feeder pillar box outer shell made out of 3.15 mm thick MS sheet inner shell made out of 2 mm thich MS sheet and MS angle section 50x50x6 mm on PCC 1:2:4 type B-1 platform 45cm above the ground level and 30 cm below the ground level, frame factory fabricated with front and backopen able double door system complete suitable for 3 phase 4 wire 415 Volt, 50 Hz, a) TPN, Copper bus bar 600 Amps insulated with colour coded heat shrinkable sleeve. b) Incoming MCCB 4 pole 315 Amp 36 kA fixed type-01 No c) Out going MCCB TP 200 Amps 25 kA fixed type- 01 Nosd)Out going MCCB TP 160 Amps 25 kA fixed type-02 Nos (e) Indicator lamps RYB –01 Set (f) Voltmeter 0-500 volts 96 mm square flush pattern-01 No. (g) Amp meter 0-500 Amps 96mm square flush pattern - 01 No (h) On load change over switch 4 pole, 415 volts 320 Amps in open execution. -01No |
| 58 | Notes:- (i) The quoted rate shall includes minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) Panel drawing shall be got approved from accepting officer before placing of orderfrom Engr-in-Charge/GE. (iii)The bus bar connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (iv) Cost of marking description on the front door as per direction of Engr-in-Charge is incl in quoted rate. (v) Cable will be entered in panles through gland. |
| 59 | Excavating in post holes (or similar holes) eachn exc 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n, exc 50 mtr and making good surface for hard and dense soil complete all as specified and directed. |
| 60 | Supplying, fabrication, errecting , connecting, testing and commissoningoffactory made and tested,automatic power factor control panel (APFC Panel), indoor type , floor mounted,cubical front opening type,protection class IP-42 and made of 16 SWG CRCA MS sheet and MS angle 40x40x6mm thick, powder coated finish over one coat of red oxide primeron outside surface and painted inside with two coats of red oxide primer,including internal wiring with PVC insulated solid copper conduit cables, IS – 694 marked, 1100 volts grade of appropriate size but not less than 2.5 sqmm and comprising of the following :-(for 630KVA Transformer) |
| 61 | (a) Incoming MCCB, LT, 4 pole, 400Amp rating, 35 kA rupturing capacity adjustable thermal settings: 01 Nos . |
| 62 | (b) Capacitors type MPPH(heavy duty) as per IS 13585/ hot I / 1994 / IS 13340/ 1993, for 225 KVAR, having 5 nos of steps / stages. (5,10,10,25,50x3) |
| 63 | (c) Microprocessor based, modular type , IntelligentAPFC relay capable of having self adjustment to any capacitor value suitable to maintain power factor between 0.9to 0.99 with digital indication of power factor, preset parameters and having in built capability of indication and elimination of defective capacitor steps. |
| 64 | Supply, installing, testing and commissioning offactory made and tested,automatic power factor control panel (APFC Panel), outdoor type, cubical front opening type,protection class IP-54 and made of 16 SWG CRCA MS sheet and MS angle 40x40x6mm thick, powder coated finish over one coat of red oxide primeron outside surface and painted inside with two coats of red oxide primer,including internal wiring with PVC insulated solid copper conduit cables, IS – 694 marked, 1100 volts grade of appropriate size but not less than 2.5 sqmm and comprising of the following :-(for 250 KVA Transformer) |
| 65 | (a) Incoming MCCB, LT, 4 pole, 160Amp rating, 35 kA rupturing capacity adjustable thermal settings: 01 Nos . |
| 66 | (b) Capacitors type MPPH (Heavy duty) as per IS 13585/ hot I / 1994 / IS 13340/ 1993, for 100 KVAR, having 5 nos of steps / stages. (5,10,10,25,50) |
| 67 | (c) Microprocessor based, modular type , IntelligentAPFC relay capable of having self adjustment to any capacitor value suitable to maintain power factor between 0.9to 0.99 with digital indication of power factor, preset parameters and having in built capability of indication and elimination of defective capacitor steps. |
| 68 | (d) Direct capacitor for Transformer no load losses 7.5 KVAR withTPN MCB 25 Amps |
| 69 | Supplying, fabrication, errecting , connecting, testing and commissoningoffactory made and tested,automatic power factor control panel (APFC Panel), outdoor type, cubical front opening type,protection class IP-54 and made of 16 SWG CRCA MS sheet and MS angle 40x40x6mm thick, powder coated finish over one coat of red oxide primeron outside surface and painted inside with two coats of red oxide primer,including internal wiring with PVC insulated solid copper conduit cables, IS – 694 marked, 1100 volts grade of appropriate size but not less than 2.5 sqmm and comprising of the following :-(For 400 KVA Transformer) |
| 70 | (a) Incoming MCCB, LT, 4 pole, 250Amp rating, 35 kA rupturing capacity adjustable thermal settings: 01 Nos . |
| 71 | (b) Capacitors type MPPHas per IS 13585/ hot I / 1994 / IS 13340/ 1993, for 150 KVAR, having 5nos of steps / stages. (5,10,10,25,50x2) |
| 72 | (c) Microprocessor based, modular type , IntelligentAPFC relay capable of having self adjustment to any capacitor value suitable to maintain power factor between 0.9to 0.99 with digital indication of power factor, preset parameters and having in built capability of indication and elimination of defective capacitor steps. |
| 73 | Supplying, fabrication, errecting , connecting, testing and commissoningoffactory made and tested,automatic power factor control panel (APFC Panel), outdoor type, cubical front opening type,protection class IP-54 and made of 16 SWG CRCA MS sheet and MS angle 40x40x6mm thick, powder coated finish over one coat of red oxide primeron outside surface and painted inside with two coats of red oxide primer,including internal wiring with PVC insulated solid copper conduit cables, IS – 694 marked, 1100 volts grade of appropriate size but not less than 2.5 sqmm and comprising of the following :-(For 100 KVA Transformer) |
| 74 | (a) Incoming MCCB, LT, 4 pole, 100Amp rating, 35 kA rupturing capacity adjustable thermal settings : 01 Nos . |
| 75 | (b) Capacitors type MPPHas per IS 13585/ hot I / 1994 / IS 13340/ 1993, for 40 KVAR, having 5 nos of steps / stages. (2,3,5,10,20) |
| 76 | (c) Microprocessor based, modular type , IntelligentAPFC relay capable of having self adjustment to any capacitor value suitable to maintain power factor between 0.9to 0.99 with digital indication of power factor, preset parameters and having in built capability of indication and elimination of defective capacitor steps. |
| 77 | (d) Direct capacitor for Transformer no load losses 3.3 KVAR withTPN MCB 16 Amps |
| 78 | Notes for Ser item No 49 to 52 :- (i) The APFC panel and all connected items mentioned shall be of the same make. (ii) The equipment offered shall be complete in all respects. Any material and components not specifically stated in this specification but which is necessary for trouble free operation of the equipment and accessories specified in this specification, shall be deemed to be included unless specifically excluded. Theequipment shallconform in all respects to high standards of engineering design and workmanship and shall be capable of performing in continuous operation. (iii) Necessary foundation with PCC 1: 3:6 of C-2 in 20mm graded stone aggregate shall be done & deemed to be included in the contract. (iv) Panel drawing shall be got approved from accepting officer before placing of orderfrom Engr-in-Charge/GE. |
| 79 | Supply, fabrication, errecting , connecting, testing and commissoning of LT feeder pillar box outdoor type fabricated out of 3.0 mm thick CRCA sheet ,CPRIapproved complete with powder coating withlockable/open ablewith arrangement of pad locking on both doors . mounted on M.Sangle Iron frame of size 40x40x5mm of suitable length and comprising of following, complete all as specified and directed:- (a) Supply and fixing copper bus bar 100 Amp with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set. (b)Direct capacitor for transformer 630 KVA atno load losses 22.1 KVAR to withstand @ 480V. (c) Supply and fixing MCCB FP 63 Amps 25kA - 01 NoFor Main incoming,Thermal adjustable Type ics=100%icu ) |
| 80 | Supply, fabrication, errecting , connecting, testing and commissoning ofLT feeder pillar box outdoor type fabricated out of 3.0 mm thick CRCA sheet ,CPRIapproved complete with powder coating withlockable/open ablewith arrangement of pad locking on both doors . mounted on M.Sangle Iron frame of size 40x40x5mm of suitable length and comprising of following, complete all as specified and directed:- (a) Supply and fixing copper bus bar 100 Amp with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set. (b)Direct capacitor for transformer 400 KVA atno load losses 15 KVAR to withstand @ 480V. (c) Supply and fixing MCCB FP 40 Amps 25kA - 01 NoFor Main incoming,Thermal adjustable Type ics=100%icu ) |
| 81 | Supplying, fabrication, errecting , connecting, testing and commissoning of factory made, CPRI approved, cubical type, indoor type LT panal board, totally enclosed , dust, weather and vermin proof 1100 Volt grade , 50Hz, AC supply made out by 3.15mm thick CRCA sheet steel for load bearing and 2 mm thick for non load bearing, fully compartmentalised, with IP 65 protection all as per conferming to IS 2417 of 1962 complete including the following accessories housed in all as specified and as directed . |
| 82 | (a) 4 Nos bus bar of equal size made out ofcopper strip of suitable size with PVC insulated coloured heat shrinkabal type sleeves, of rating 1200Amps, mounted on non cracking resin type insulators - 01 Job (b)LT ACB, 4 pole, 415 volts, 50 kA, 800 Amps mannual draw out type with thermal magnetic release, Icu=Ics=Icw 50kA (1 Sec) with accessories confirming to IEC 60947-2&3 - 01 No (Incoming). (c) TPN, 4 Pole, MCCB 400 Amps, 415 Volt,with thermal magneticreleaseIcs = 100% Icu as per IEC 60947-2 breacking capacity 36 KA - 02 No (out going)for LTP1& APFC Panel. (d) TPN, 4 Pole, MCCB 200 Amps, 415 Volt,with thermal magnetic releaseIcs = 100% Icu as per IEC 60947-2 breacking capacity 36 KA - 03No (out going) for LTP2 ,LTP3& Spare. (e) TPN, 4 Pole, MCCB 100 Amps, 415 Volt,with thermal magnetic releaseIcs = 100% Icu as per IEC 60947-2 breacking capacity 36 KA - 01No (out going) LTP4. |
| 83 | (f)Interconnection of MCCBs to Busbar with copper strip of suitable size with PVC insulated colour coaded heat shrinkable type sleeves - 1 Job. (g) Digital type multifunctional meter for measuring Voltage & Amperage with sellector switch for incoming - 01 Set. (h)Indication lamps R, Y & B - 01 Set. (i)Copper tinned cable glands for incoming & Outgoing cables. - 01 Job. (j)Interconnection of metering equipment with PVC insulated unsheathed, single core, multistranded, copper conductor cables 1100 volts grade of suitable size - 01 Job. (k)Protection fuses HRC type of suitable capacity for Panel wiring - 01 Job. (l)Digital type multifunctional meter for measuring Voltage & Amperage with sellector switch for outgoingACB`s & MCCBs. |
| 84 | Notes for item No 53 to 55:- (i) The quoted rate shall includes minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) Panel drawing shall be got approved from accepting officer before placing of orderfrom Engr-in-Charge/GE. (iii)The bus bar connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (iv) Cost of marking description on the front door as per direction of Engr-in-Charge is incl in quoted rate. (v) Cable will be entered in panles through gland. |
| 85 | Supply and Fixing in existing panelMCCB TPN160 Amps , 415 Volts, 35 kA ,4 pole, Ics=100% Icu , overload adjustable short circuit adjustabletypeincluding complete connection complete all as specified and directed. |
| 86 | Supply and Fixing in existing panelMCCB TPN250 Amps , 415 Volts, 35 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustabletypeincl complete connection complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
