|
| 1 | Design, Supply, fabricated / welded construction, made out of high quality Steel section suitable for mounting the 1 Nos. exhaust pipes verticallyand horizontally . The base frame shall be suitably designed & shop drawings to be got approved from Architect. |
| 2 | Supply&burryingof 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnelforwatering and one earthing lead ofno. 6SWGG.I. wirein 15 mm dia. GI pipe upto ground level, 300mm square C.I. box with hinged cover,masonary housing alternate layer of coke and salt at least 150mm thick alround, including excavation and back filling etc. as per the direction of engineer in-charge complete in all respect . |
| 3 | Providing & fixing 50mm x 6mm G.I. strip on surface, in recess or in ground including connections etc. as required (Pig Tails of DG sets). |
| 4 | Supply&burryingof 600mm x 600mm x 6 mm copper plate, vertically for earthing with itstop at least 3 meters below ground level complete with 20 mm G.I. pipefor watering funnel, 300 mm square C.I. frame with hinged cover, masonry housing, alternate layersof coke and salt at least 150 mm thick alroundincluding excavation and back filling etc. complete in all respects. |
| 5 | Providing & fixing 50mm x 6mm insulated Copper strip on surface, in recess or in ground including connections etc. as required. |
| 6 | Supply, Laying and testing of aluminium / copper conductor cable PVC / XLPE insulated armoured, served, sheathed 1100 volts grade. On surface the cable run shall be fixed by GI clamps etc. of suitable size or on existing cable tray or insideexisting RCC / HDPE DWC pipe complete in all respect .The armouring of the cable shall be properly connected with the earth conductor including fixing of palm or pin type copper tin plated cable socket (lug) / end terminations to the cable leads, insulating with tape and making connections with brass / nickle plated compression gland, providing cable tags complete in all respect upto the satisfaction of Engineer-in-charge. (The supply of terminations and glands shall be included in the item). |
| 7 | 35 sqmm 4 core aluminum cable |
| 8 | 300 Sq.mm. 3.5 Core aluminium cable. |
| 9 | Supply and erection of Perforated type cable trays made out of prefabricated Galvanized sheet steelincluding tees, bends, crossings, reducers, couplings to be laid in cable trenches, over head on wall or hanged from ceilingincluding all neccessary supports, brackets at every 1500 mm c/c, grouting, levelling, suspention and fixing arrangements, dash fastners, G.I. nuts & bolts complete in all respects. |
| 10 | The support for 450 mm wide cable tray will be by 40 x 40 x 5 mm MS angle to be included in this item only. |
| 11 | 450 mm (W) X 50 mm (H) X 2.0 mm (T) |
| 12 | Supply installation testing & commissioning of Control panel to integrate with Main LT panel and HVAC panel complete all inclusive and as per instructions of the Architect/Engineer-in-charge. |
| 13 | Supply, installation, testing & commissioning of AMF control panel with acoustic enclosure complete as per specification and as per instructions of the Architect/Engineer-in-charge. |
| 14 | Supplying, installation, erection, testing and commissioning offollowing radiator cooled Diesel Engine with rated capacity of380 KVA with in-line 4 stroke, 6 cylinder well designed air handling system of following specifications-Dry type, Replaceable paper element air cleaner with restriction indicator.- Air to air after cooling.- Optimized Turbocharger for increased altitude capabilities.Best in class fuel economy with- CELECT fuel system with A1 class electronic governing.- Dual fuel filter system: Pre filter including water separator and Water In Fuel (WIF) sensor and main filter. All D.G. Set shall be as per latest CPCB-II regulation. The Cost to include all taxes, freight, loading, unloading and placing on the foundation and synchronizing with the main electrical panel, HVAC panel of the college and above mentioned control panel & AMF Panel. |
| 15 | Electrical lift pump for faster response• Standard integral set-mounted radiator system, designed and tested for 50°C ambient temperature.• Full flow spin on lube oil filter.• Plate type lube oil cooler.• First fill of lube oil and coolant.• Electrical starter motor with soft start engagement feature.• Battery charging alternator.• 2 x 12 V DC batteries. |
| 16 | Alternator• HC alternator frames .• Brushless type, Screen protected, Revolving field, Self-excited alternator conforming to IS/IEC 60034-1• Phase reconnect able winding with 12 terminals brought out for connection.• Better motor starting capability.• Best in class efficiency.• Compact design with sealed bearings for longer life and lesser maintenance.• Impregnation on all wound components for better mechanical strength. |
| 17 | Control Panel• Control panel to be manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish.• The control panel must consists of the following parts:• Power Command 1.2 controller• Aluminum bus bars with suitable capacity with incoming/ outgoing terminals• Indicating lamps for ‘Load ON’ and ‘Set Running’• Instrument fuses duly wired and ferruled• MCCB of suitable rating with overload and short circuit protections |
| 18 | Power Command 1.2 featuresThe Power Command® control system must be a microprocessor based generator set monitoring, metering and control system with LCD display designed to meet the demands of today’s engine driven generator sets.• Intuitive operator interface which includes LED backlit LCD display with tactile feel soft-switches and generator set status LED lamps.• Digital AVR for shunt or PMG excitation with torque matching. • Digital electronic governing with temperature compensation and smart starting.• SAE J1939 interface to Full Authority Electronic (FAE) engines. • Remote start-stop.• Engine metering: Oil pressure, Coolant temperature, Battery voltage, Engine speed. |
| 19 | • AC Alternator metering: L-L Voltage and L-N Voltage, Current (1 and 3 phase), Volt-Amperes (phase and total) and Frequency. • Engine protection: Low lube oil pressure, High/Low coolant temperature, over speed, Battery Over/Under/Weak Volts, Fail to crank/start, Sensor failure.• AC Alternator protection: Over/Under voltage, Over/Under frequency, Over current, Short circuit and Loss of AC sensing.• Data logging: Engine hours, Control hours, Engine starts and up to 10 recent fault codes. • Configurable glow plug control.• Configurable cycle cranking.• 12 and 24 Volt DC operation.• Sleep mode.• Programmable I/Os (4 inputs and 2 outputs), expandable with AUX101/102 modules.• Modbus interface (RS485 RTU).• In Power compatible (PC based service tool).• Certifications - meets the requirement of relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards. |
| 20 | Silencer•Hospital grade silencer suitably optimized to meet stringent noise emission standards laid down by MoEF / CPCB. Mounting Arrangement•Engine and alternator are mounted on a common MS fabricated base frame with AVM pads.•Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning. |
| 21 | Acoustic Enclosure•Specially designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions.•The acoustic enclosure to be made of CRCA sheets in munsel green shade and a structural/ sheet metal base frame painted in black.•High quality noise absorbent and fire-retardant grade acoustic insulation material (Rockwool) complying to IS 8183.•Air inlet louvers specially designed to operate at rated load.•Base lifting for easy handling at customer site.•Designed to have optimum serviceability.•Made on special purpose CNC machines for consistency in quality and workmanship.•11 tank pretreatment process and UV resistant powder coating of all parts to withstand extreme environment.•Use of special hardware for longer life.•Flush styling - no projections.•Fluid drains for lube oil and fuel.•Fuel filling arrangement inside the enclosure |
| 22 | TOTAL AMOUNT INCLUSIVE OF GST |
