Construction Of Proposed Block Level Mission Shakti Bhawan At Gunupur Block In The District Of Rayagada For The Year 2021 ( Civil Ei And Ph ) Construction Of Proposed Block Level Mission Shakti Bhawan At Gunupur Block In The District Of Rayagada Fo
Tender Value
42.48 Lakhs
Estimated cost
Bid Submission
12 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GUNUPUR → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Proposed Block Level Mission Shakti Bhawan At Gunupur Block In The District Of Rayagada For The Year 2021 ( Civil Ei And Ph ) Construction Of Proposed Block Level Mission Shakti Bhawan At Gunupur Block In The District Of Rayagada For The Year 2021 ( Civil Ei And Ph )
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road landincluding uprooting rank vegetation, grass, bushes, shrubs, saplings and trees grith upto 300mm, removal of stumps of trees cut earlier and disposalof unserviceables materials andstacking of serviceable materials to be used or auctioned upto a lead of 10000 meters including removal and disposal of top organic soil |
| 2 | Earth work in all kind of soil within 50m initial lead and lifts 1.5 M initial lifts including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3M in depth and as per the direction of the Engineer-in-charge with all labour and T&P required for the work complete in all respects. |
| 3 | Supplying, filling in foundation trenches & plinthwith excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour T & P complted as directed by the Engineer-in-Charge. |
| 4 | Supplying, filling in foundation trenches & plinth ditches with sand well watered and rammed in layers not exceeding23cm in depth with all lead and lift includingcost, conveyance, loading,unloading, royalties, taxes of all the materials and labour with T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 5 | Cement Concrete of proportion (1:3:6) in foundation, floors using 40mm size Hard Granite Metal of approved quality from approved quarry including hoisting, lowering, laying, compacting concrete including watering and curing with cost conveyance, royalty & taxes of all materials and labour with T&P required for the work etc. complete as per standard specification and direction of Engineer-in-Charge. |
| 6 | Cement Concrete of proportion (1:2:4) using 12mm size hard black broken granite stone chips crusher broken of approved quality from approved quarry including hosting, lowering and laying concrete in layers not exceeding 22cm (9\") thick to required level ramming watering curing, centering & shuttering etc. including cost & conveyance of all materials with all taxes and royality and all labour with T&P required for the work etc. including dewatering if required as per drawing and technical specification and as directed by the Engineer-in-charge. |
| 7 | R.C.C. work of M-20 grade having miniume compressive strength in work test of 200 kg/Cm2 at 28 days using 20mm and down graded size black hard crusher broken granite stone chips of approved quality and from approvedquarry including hoisting lowering and lating concrete and compacting by using vibrators watering,curring for 28 days centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost & conveyance , royalties and taxes of all materials with all labour with T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening,cutting, beinding grills and placing in proper position. Footing |
| 8 | Column up to slab level(GF) |
| 9 | Column up to slab level(FF) |
| 10 | Plinth Beam |
| 11 | Window Sill Band |
| 12 | Lintel |
| 13 | 65mm thick Chajja |
| 14 | Roof Beam |
| 15 | Roof Beam for First floor |
| 16 | Staircase |
| 17 | Roof Slab |
| 18 | Roof Slab for Head Room FF |
| 19 | Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-415) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.Ground Floor |
| 20 | HYSD reinforcement for Head Room FF |
| 21 | 2.5 cm (1\") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor |
| 22 | grading concrete for First Floor |
| 23 | Fly ashbrick masonry in cement mortar (1:6)usingbricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. after immersing Bricks for six hours in waters before use with watering, curing etc. completeincluding cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.(Foundation & Plinth) |
| 24 | Fly ashbrick masonry in cement mortar (1:6)usingbricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. after immersing Bricks for six hours in waters before use with watering, curing etc. completeincluding cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. Super Structure GF |
| 25 | Super Structure FF |
| 26 | Fly ashbrick masonry in cement mortar (1:4)usingbricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. after immersing Bricks for six hours in waters before use with watering, curing etc. completeincluding cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 27 | Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coal traing 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending sizes where necessary with cost and conveyance royalities and taxes of all materials and labour with T&P required for the work etc complete in all respect in all floors. |
| 28 | Supplying, fitting and fixing of 32mm thick Flush doors of approved quality with all brass fittings including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 29 | Doors Semi Glazed Providing & fabricating fixing door shutter with 19mm thick block board frame work as per drawing matching the aligned partition. The shutter will have part glazed 12mm thick float glass side beveled, high polished and part solid one covered with 6mm BWP ply both side covered with 1mm thick laminate of approve shade with necessary wood beading etc mat polished with mealmine polish complete with inclusive of cost of necessary hinges, handels aldroops etc all labour materials taxes etc completedin all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 30 | Supplying and fitting and fixing of un-Plastered Poly Viny Chloride (UPVC) (FENESTA/ NCL, VEKA LTD) Three Track Three Panel Sliding window 60 Series duly manufactured using UPVC reinforced profile of 108mm x 45mm x2.5mm for outer frame 39mm x 58mm x 2.25mm capable of mounting singles glazing system structurally reinforced with hot dip galvanised upto 50 microns o minimum thickness of 1.5mm prefabricated and welding through fusion welding the window sash shall be fitted with 6mm thick clear thoughened glass of SAINT-GOBAIN make duly fixe with EPDM weathering seal resistance accessories like clipping locking system made of alluminium 1no. per set of sashes and d the system is to be installed at the site using anchor fasteners ailicon rubber sealant easy glazing / deglazing at the site. etc including cost and conveyances of all materials accessories labour chargee materials and product confiriming of ASTM D 638-14 EN 477-95 and other applicable codes and standards. |
| 31 | Supplying ,fitting,fixing of all types of M.SgrillsWindow & Ventilatorsmade of ISI marked standard MS Angles with MS sheets of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, automatic door closers, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 32 | Providing supplying fitting and fixingof vitrified tile in floors or equivalent make in all floors Vetrified tiles flooring on 600x600mm thick sized fixed on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slurry using premium grade of size 600mmx600mm I.S. standard confirming to IS 13757 having thickness8mm to 10mm mixed with pigment to match the shade of tilesincluding rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.(15.01)Vetrified tiles 600mmx600mm coloured / printed series |
| 33 | Providing supplying fitting and fixingof vitrified industrial Tiles in all floors treads or steps and landing onover 25mm thick cement plaster (1:1) jointed with neat cement sluury mixed with pigment to match the shades the shades of the tiles including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge |
| 34 | Providing supplying fitting and fixingof vitrified tile in dado of approvedor equivalent make in all floors Vetrified tiles flooring on 600x600mm thick sized fixed on 20mm thick bed of cement mortar 1:3 (1 cement : 3 sand) jointed with neat cement slurry using premium grade of size 600mmx600mm I.S. standard confirming to IS 13757 having thickness8mm to 10mm mixed with pigment to match the shade of tilesincluding rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.(15.01)Vetrified tiles 600mmx600mm coloured / printed series |
| 35 | Providing supplying fitting and fixingof Ceramic wall Tiles of 20cmx30cm & 20cmx20cm over 12mm thick cement plaster (1:3) jointed with neat cement sluury mixed with pigment to match the shades the shades of the tiles including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge |
| 36 | Providing 16 mmthick Cement Plaster with C.M. (1:6) with screened and washed sharp sand for mortal and finished smooth to the rough surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge, Ground Floor |
| 37 | First Floor |
| 38 | Providing 12 mmthick Cement Plaster with C.M. (1:6) with screened and washed sharp sand for mortal and finished smooth to the rough surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge (For inside & Out SIde plaster), Ground Floor |
| 39 | First Floor |
| 40 | 6mm thick cement plaster (1:4) with screened and washed sharp sand for mortar and finished smooth RCC work after closed deep chipping & slurry treatmentwatering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge. (For indise Plaster), Ground Floor |
| 41 | First Floor Head Room |
| 42 | Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 43 | Painting two coats overiron with approved enamel paints of approved colour, shade over a coat ofprimer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 44 | Finishing wall surfaces with acrylic putty (water based) of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge, Ground Floor |
| 45 | First Floor |
| 46 | Primingone coat with any approvedprimer over new plaster surface including cost of all labour,all materials, conveyance, taxes T&Prequired for the work etc. complete as per tecnical specification and Technical specification and as directed by the Engineer-in-Charge. Ground Floor |
| 47 | First Floor |
| 48 | Wall Painting two coats with plastic emulsion paint ofany approved quality on new works to wall surface after cleaning surface including cost of materials, cost conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all floors as per direction of the Engineer-in-charge., Ground Floor |
| 49 | First Floor |
| 50 | Painting 2 coats with Weather coat of approved shade on new works two coats to give an even shade over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 51 | First Floor |
| 52 | Providing fitting fixing of rain water spout including cost of all materials and labour T & P etc completed |
| 53 | Paver block of M-30 grade of approved make, variety, colour and size made by block making machine with strong vibratory compaction of approved design and shape laid in required colour paitern over 50mm thick compacted bed of coarses filling the joint with fine sand etc all complete includingcost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 54 | Providing Tar paper below plinth bendall complete includingcost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 55 | Providing, Fixing and fitting of design ceiling made out of 12.5mm Gypsum board of approved section and size fitted and fixed to steel angle section framed with Aluminium anodised T-section no.3215 with 2\"-0\" centre to centre, L section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminum grid 2\"-0\" x 2\"-0\" with Gypsum board suspended from ceiling etc. complete.and suspended from roof slab with roll plug including cost, conveyance of all materials with labour and T&P required for the work etc. complete. |
| 56 | ELECTRICAL WORKSRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ROMA/ SIEMENS/ Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & coverof suitable sizewith 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard ) , Group-A. L.P.- 18F.P.- C.B.- |
| 57 | Group-B. L.P.- 30F.P.-12 C.B.- |
| 58 | Group-CL.P.-18 F.P.-13 C.B.- |
| 59 | Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard, Group-A. |
| 60 | On Existing board. |
| 61 | Recessed submain wiring along with earth wire with the following sizes of FRLS PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard/Polycab), a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring |
| 62 | a)2x1.5mm2(1.19.2.SOR-17) loop wiring |
| 63 | b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) |
| 64 | c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17) |
| 65 | e)4x6mm2+ 2x2.5mm2(1.8.8.SOR-17) |
| 66 | S/F of 20W/18WLEDbattenlight of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic make. |
| 67 | S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose. |
| 68 | S/F.of 9W/10Wt.LED lamps of Havels/Crompton make. |
| 69 | S/F of 1x15W 5700K cool daywhite lightsurface celing LED light made up of pressure die cast housing withsecondary optics ,IP66 protectionHavells make((ENDURA NEO DL SURFACE/INTEGRA NEOSURFACE) OR Equivalent model of Havells/Crompton makeincluding fixing onceiling with grip and Connection as per direction of Engineer-in-Charge.(ext) |
| 70 | S/F of1x15W LED of 3700K Warm white/6000K coolday whiterecess mounted downlighter made up of pressure die cast Al. heat sink and PC diffuser in white powder coated finish with integrated driverHavells(INTEGRA)/ Crompton (CROM ROUND) OR Equivalent model of Havells & Crompton make including cutting offalse ceiling and fixingas per direction of Engineer-in-Charge. |
| 71 | S/F of 1x30W 5700K LED street light made up of pressure die cast housing withsecondary optics ,IP66 protectionHavells make(ENDURA CITYLITE PLATINUM)/ Crompton (ASTRA+) including GI bracketall accessories and connection as per direction Engineer-in-Charge. |
| 72 | S/F.of 48\"A.C.Ceiling fans complete with ISI marked (Havells (SS390 metallic/Havells SS390 DeCo) /Usha Striker (platinum/galaxy)/ Orient(Jazz/summer pride). make including all accessories & connection as per direction of Engineer-in-charge. |
| 73 | Supplying and fixing of stepped type modular regulator of ISImarked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of18 SWG on surface or in recess with suitable size Modular base & cover modulein front including providing and fixingconnection, painting etc as required. |
| 74 | Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge including Cutting & threading of Downrod as per direction of Engineer-in-charge. |
| 75 | S/F of 300mm metal exhaust fan with wall cutting masonary work including all accessories of USHA (Aeroclean)/ Bajaj (Bahar)/ Crompton make & connection as per direction of Engineer-in-charge. |
| 76 | Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required. |
| 77 | Supplying and fixing suitable size Modular G.l. box forsurface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet AC Point with 20/25AMP SP MCB of (Hager/L&T/Legrand make)connection, painting etc as required. |
| 78 | Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & coverand blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/ Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge. |
| 79 | S/F of Modular Multipurposeboard with 1nos. Of15/16A & 6/6A modular SP switch and modular socket ncluding suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T)completewith connectionas per the direction of Engineer-in-Charge. |
| 80 | S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T)completewith connectionas per the direction of Engineer-in-Charge. |
| 81 | of S/F of (4+12) way TPN Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP,12x(6-32Amp)SP MCB of Hager/ L&T/Legrand/C&Smake including all accessories and connection. as per direction Engineer-in-Charge. |
| 82 | S/F of 6 sq.mm 2 Core Alluminium, armoured LT power Cable With G.I Stay Wire of XLPE insulated 650/1100 grade(make-Havells/Polycab)(For service wire) |
| 83 | P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required((To be connected to DBs) |
| 84 | S/F of Electrical safetyacrylic chart/Poster depicted with varioussafety precautions , management and provides information to perform First Aidin case of electric shock etc in English and odia language with Multi color images and sign |
| 85 | S/f.of Standard earthing with G.I.earth pipe(With charcoal and salt) (Sl.No.3.2.of SOR-2017) as per direction of Engineer-in-charge. |
| 86 | Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge. |
| 87 | S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft)copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge. |
| 88 | S/F of1 phase KWh meterof 1-30Amp with LCD display with optical port and boxof L&T make. |
| 89 | Service connection charges for single phase supply |
| 90 | Fabrication of 100Amp Main Panel board size 48\"x36\"x12\" with powder coat made out of SWG CR sheet with designing with(i)100A , 25kA, 4P MCCB Adjustablethermal & magenetic Legrand/ L&T/ & Hager Make.-1 nos. (iii)100A 4P onload changeover of Legrand/L&T/ Hager/C&S make(ii)63A, 4P MCB C- Series Legrand / Hager / L&T Make. - 4 Nos.(iv)40AMP, DP MCB C- Series Legrand / Hager / L&T Make. - 4(v) 100AMP Kitkat fuse -3Nos. (vi) S/F.of Digital Voltmeter,Ammeter, Selector switches CT coil and Indicator lamp RYB with toggle switch etc.-1 set (vii)Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour.(viii)Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts.(ix) 250Amp TPN Cu. busbar-1set |
| 91 | Providing SITC4.5Kg CO2 Type Fire Extinguisher, Design, construction and testing as per IS 15683 with fire rating 21B. operating temperature +5°C to +55°C, . CO2 Gas as per IS: 15222.externally painted with PO Red Shade No. 538 of IS 5, Supplied with standard accessories.(make-Safex/Minimac/Ceasefire) |
| 92 | P. H. WORKS INTERNAL PH WORK : Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 20mm dia PVC Pipe (Sch-80) |
| 93 | 25mm dia PVC Pipe (Sch-80) (Water Supply) |
| 94 | 32mm dia PVC Pipe (Sch-80)(Top Foor) |
| 95 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN |
| 96 | 15mm dia CP long body bib cock (Jaquar)CON-CHR-107KN |
| 97 | 15mm dia CP Short body bib cock (Jaquar Make)CON-CHR-037KN |
| 98 | 20mm dia CP concealed stop cock (Jaquar Make)CON-CHR-83KN |
| 99 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 573 |
| 100 | 15mm dia CPtwo way bib cock (Jaquar)CON-041KN |
| 101 | 25mm dia Brassfull way valve (Shakti make) |
| 102 | 32mm dia Brassfull way valve (Shakti make) |
| 103 | CP Extension piece |
| 104 | 125mm CP Grating |
| 105 | C.P. Flange |
| 106 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge2000 liters capacityPVC water storage tank at roof of (Ground floor) (Sintex -4 Layer) |
| 107 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. Ground Floor |
| 108 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge Ground Floor |
| 109 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor |
| 110 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 111 | 75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 112 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 113 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 114 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 115 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 116 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 117 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 118 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 119 | 110mm U-PVC Socket plain (Ori Plast/Finolex/Supreme Make) |
| 120 | Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. Orissa pan (580mmx450mm)(Hindware/ Parryware/ Neycer make) |
| 121 | Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. European water closet (Hindware/Parryware/Neycer make) |
| 122 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Magnum urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 123 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 124 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. 550mmx400mm W.H.basin (Hindware/Parryware/Neycer) make |
| 125 | Counter Basin |
| 126 | Supplying all materials, labour, T&P for fitting & fixing plain Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10”sink |
| 127 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP towel rail (Plaza/ Johnson Make) |
| 128 | Towel ring (Plaza/ Johnson Make) |
| 129 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 130 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 450mm X 600mm size BE Mirror Wallmount (Best quality) |
| 131 | Large size Mirror=1 X 1.80m X 0.90m= |
| 132 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap Dish |
| 133 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 134 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 135 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. Ground Floor |
| 136 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. Ground Floor |
| 137 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. Ground Floor |
| 138 | R.C.C slab |
| 139 | Supplying all materials, labour, T&P and providing and fixing vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge ) Ceramic Tile 30cm x 30cm Ground Floor Chamber A. Toilet:-- 1 X 1.28m X 1.28m=1.64 SQm,Female Toilet Block Toilet:-- 3 X 1.05m X 1.20m=3.78, Wash Area:-- 1 X 1.72m X 3.72m=6.40 Male ToiletToilet:-- 1 X 1.52m X 1.88m= 2.86 |
| 140 | Granite Tile |
| 141 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Ground Floor |
| 142 | Supplying all materials, labour, T&P and providing and fixing vitrified wall tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Vitrified Wall Tiles 45cm x 30cm Ground Floor =9.17 SQM Female Toilet Block=39.59 Male Toilet Block=9.84 |
| 143 | Providing fitting, fixing of Aluminium door with anodized AL. Flush door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 D1=5 X 0.75m X 2.10m= |
| 144 | Supplying all materials labor T&P and fitting & fixing 40mm to50mm thick marble partition tile including cutting grooves and mending good the damages with cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of the tile including rubbing and polishing all complete as per specification and direction of the Engineer in charge.1x 0.80m x 1.20m= |
| 145 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard)Aquaguard Reviva NXT RO+UV+MTDS WITH STAND |
| 146 | EXTERNAL PH WORK :Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 110mm dia P.V.C. pipe |
| 147 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge. Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 148 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge |
| 149 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.Man hole chamber size 910mmx910mmx910mm (18\" RCC Cover ) |
| 150 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 151 | 1 no 30 Users Septic tank of size (3.30m x 1.4m x 2.1m inside size) Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.(2X3.6 m x 2.4m x1.5m) Cum |
| 152 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial lift.(2X3.6 m x 2.4m x0.45m) Cum |
| 153 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.2X(3.6 m x 2.4m x1.95m) - (2.6m x 1.4m x 1.95m) Cum |
| 154 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 155 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 156 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting, bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 157 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge RCC floor, roof slab chhaja up to 4.430 m height |
| 158 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB brick having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:4 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 159 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 160 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 161 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 162 | AS PER CHIEF ENGINEER, RWS&S. ODISHA BHUBANSWER INDICATIVE RATES VIDE LETTER. NO. PB.340 DT.31.5.2010 AND Lr. No. 7050 DT 05.10.2010Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 125mmdia G.I/P.V.C/M.S casing pipes for housting fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well),Drilling of 125mm x 100 mmdia bore |
| 163 | Drilling of 100 mm dia bore 38 mtr to above |
| 164 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 125mm dia P.V.C casing pipes 00 mtr to 30mtrs |
| 165 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 125mm dia PVC (sch-80) pipe |
| 166 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH Rig |
| 167 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 168 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 169 | DOL Control panel |
| 170 | 40mm dia steel short piece |
| 171 | Well cap |
| 172 | 50mm size CI bracket |
| 173 | 2.50sqmm flat cable |
| 174 | 20mm dia rigid UPVC pipes |
| 175 | Steel rope with cover |
| 176 | Labour charges for lowering including transportation |
| 177 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge, 32mm HDPE pipes (Finolex/Supreme make) |
AI Tender Summary
Tender Timeline
Nov 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender