Provision And Installation Of Solar Water Heating System In Jcos / Or Otm Accn Of 6 Mahar And Other Sanctioned Works In The Aor Of Age E / M Under Ge ( West ) Jalandhar Cantt Provision And Installation Of Solar Water Heating System In Jcos /
Tender Value
46.85 Lakhs
Estimated cost
Bid Submission
13 Nov 2021
0 days left
EMD
93700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar Cantt → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision And Installation Of Solar Water Heating System In Jcos / Or Otm Accn Of 6 Mahar And Other Sanctioned Works In The Aor Of Age E / M Under Ge ( West ) Jalandhar Cantt Provision And Installation Of Solar Water Heating System In Jcos / Or Otm Accn Of 6 Mahar And Other Sanctioned Works In The Aor Of Age E / M Under Ge ( West ) Jalandhar Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, commissioning and testing of solar water heating sysytem at roof top building (Heat exchanger type) having capacity 500 LPD (05 Nos flat plate collector of 100 LPD each) confirming to IS-12933 Part-1 complete with copper riser tube, copper heating tube, copper heat absorber complete based on indirect transfer of heat (at temperature 60 degree centigrade to 70 degree centigrade) having insulation of rock wool/mineral wool 50mm thick at bottom and 25mm thick with toughened tempered glass of 4mm thick and cladding with aluminium sheet and absorber with 40x40x6mmenameled coated MS angle iron structure, with accessories, fasteneres etc duly grouted in PCC 1:2:4 (30x30x30cm block) type B-1 using 20mm graded stone aggregate, with hot water storage capacity 500 liters with inner shell fabricated from stainless steel sheet 1mm thick (having insulation of rock wool) mineral wool 100mm thick & cladding with 26SWG aluminium sheet with heating element 3KW, 02 Nos as electric backup of capacity or as per manufacturer\"s instructions/design, recommendation with heat exchanger in hot water tank with necessary makeup tank of stainless steel, 01 No float valve 20mm dia of brass to maintain water in collectors and hot water tank, temperature gauge (100 degree centigrade), brass gate valve in cold and hot water pipe complete all as specified and as directed. |
| 2 | Supply, installation, commissioning and testing of solar water heating sysytem at roof top building (Heat exchanger type) having capacity 1000 LPD (10 Nos flat plate collector of 100 LPD each) confirming to IS-12933 Part-1 complete with copper riser tube, copper heating tube, copper heat absorber complete based on indirect transfer of heat (at temperature 60 degree centigrade to 70 degree centigrade) having insulation of rock wool/mineral wool 50mm thick at bottom and 25mm thick with toughened tempered glass of 4mm thick and cladding with aluminium sheet and absorber with 40x40x6mmenameled coated MS angle iron structure, with accessories, fasteneres etc duly grouted in PCC 1:2:4 (30x30x30cm block) type B-1 using 20mm graded stone aggregate, with hot water storage capacity 1000 liters with inner shell fabricated from stainless steel sheet 1mm thick (having insulation of rock wool) mineral wool 100mm thick & cladding with 26SWG aluminium sheet with heating element 3KW, 02 Nos as electric backup of capacity or as per manufacturer\"s instructions/design, recommendation with heat exchanger in hot water tank with necessary makeup tank of stainless steel, 01 No float valve 20mm dia of brass to maintain water in collectors and hot water tank, temperature gauge (100 degree centigrade), brass gate valve in cold and hot water pipe complete all as specified and as directed. |
| 3 | Supply and fixing 25 mm bore hot water pipe duly insulated with glass wool and aluminium cladding 25 mm bore including cuttingand making good the disturbed surface in cement mortar 1:3 complete all as specified and as directed. |
| 4 | Supply and fixing 15mm dia tubes medium grade galvanised ironwith all fittingsfixed in walls, ceiling or under floors including cuttingand making good the disturbed surface in cement mortar 1:3 complete all as specified and as directed. |
| 5 | Supply and fixing 25mm dia tubes medium grade galvanised ironwith all fittingsfixed in walls, ceiling or under floors including cuttingand making good the disturbed surface in cement mortar 1:3 complete all as specified and as directed. |
| 6 | Supply and fixing 25mm dia gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 7 | Supply and fixing 15mm bore bib tap chromium plated, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed. |
| 8 | Supply and fixing submain wiring 2x4 Sqmm + 1x4 Sqmm earth wire of PVC insulated with stranded copper conductor FRLS single core in PVC conduit complete all as specified and as directed. |
| 9 | Supply and fixing sheet metal enclosure with socket plug top and MCB SPN enclosure with two pin and earth plug socket complete with one double pole 20 Amps, 240 Volts complete all as specified and directed. |
| 10 | Ball brass valve 25mm high pressure with polythene float and flynut complete screwed for iron pipe and fixed properly all as specified and as directed |
| 11 | Supply, hoist and fixing in position, 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe(medium grade) with all fittings complete all as specified and as directed. |
| 12 | Supply, hoist and fixing in position, 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe(medium grade) with all fittings complete all as specified and as directed. |
| 13 | Supply and fixing MS iron angle stand of suitable height of rolled steel equal angles 50x50x6mm and flat iron strip of 25x3mm for water storage tank including preparation of new steel surface of any description of new steel surface of any description over 10cm width and grith and applying two coats of synthetic enamel paint over a coat of red oxide primer and welding work complete all as specified and directed. |
| 14 | M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate (30x30x30cm block) as in path laid in panels, concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Nov 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender