Renovation Of Space For Installation Of Submarine Periscope In Csir-Csio Chandigarh Renovation Work
Tender Value
15.23 Lakhs
Estimated cost
Bid Submission
10 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CSIO SECTOR 30 CHANDIGARH → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Space For Installation Of Submarine Periscope In Csir-Csio Chandigarh Renovation Work
BOQ
| Sl. No. | Item Description |
| 1 | HalfbrickmasonrywithF.P.S.brickofclassdesignation7.5 First class in foundations and plinth/ superstructure in. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 3 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Make :- DorSet/Indobrass/Dorma |
| 4 | Providing and fixing aluminium sliding door bolts, ISI marked poweder coated to required colour or shade, with nuts and screws(also powder coated) etc. complete :250x16 mm Make:- Classic or Equivalent |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, powder coated to required colour or shade, with necessary screws(powder coated) etc. complete :250x10 mm Make:- Classic or Equivalent |
| 6 | Providing and fixing aluminium tower bolts, ISI marked, powder coated to required colour or shade, with necessary screws etc. complete : 150x10 mm Make:- Classic or Equivalent |
| 7 | Providing and fixing aluminium handles, ISI marked, powder coated to required colour or shade, with necessary screws etc. complete :125 mmMake:- Classic or Equivalent |
| 8 | Providing and fixing aluminium hanging floor door stopper,powder coated to required colour and shade, with necessary screws etc. complete.Twin rubber stopper Make:- Classic or Equivalent |
| 9 | Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand).Stone ware spout |
| 10 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Make:- Diplast/ Supreme or Equivalent |
| 11 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter |
| 12 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°110 mm bend Make:- Diplast/ Supreme or Equivalent |
| 13 | 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on old work Make :- Asian/Narolac/Dulux. |
| 15 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. Two coats on old work Make :- Asian/Narolac/Dulux. |
| 16 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 17 | Taking out existing wooden and aluminiumdoor/Cupborad/Window shutter andrepair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 18 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within CSIOas per direction of Engineer - in- charge. |
| 19 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin- charge. |
| 20 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within CSIO as per direction of Engineer-in-charge In cement mortar |
| 21 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within CSIO: Of area 3 sq. metres and below |
| 22 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling pvc flooring,old plaster etc including disposal of unserviceable material and stacking of serviceable material with in CSIO as directed by Engineer-in-charge |
| 23 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond CSIO for all leadsincluding all lifts involved |
| 24 | Cutting holes up to 30x30 cm in walls including making good thesame: With common burnt clay F.P.S. (non modular) bricks |
| 25 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing completeso as to make it leak proof. |
| 26 | Providingandfixingaluminiumworkfordoors,windows,ventilators andpartitionswithextrudedbuiltupstandardtubularsections/Including filling of sapce between frame and wall with sealent appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws orwithfixingclips,orwithexpansionholdfastenersincluding necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing /paneling, C.P.brass/stainless steelscrews,allcompleteas perarchitectural drawingsandthedirectionsofEngineer-in-charge.(Glazingand paneling to be paid for separately) : For fixed portion . Powdercoatedaluminium(minimumthicknessofpowder coating 50 micron) |
| 27 | Providingandfixingaluminiumworkfordoors,windows,ventilatorsandpartitionswithextrudedbuiltupstandardtubularsections/appropriateZsectionsandothersectionsofapprovedmakeconforming to IS: 733 and IS : 1285, fixed with rawl plugs and screwsorwithfixingclips,orwithexpansionholdfastenersncludingnecessary filling up of gaps at junctions, at top, bottom and sides withrequired PVC/neoprene felt etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing /paneling,C.P.brass/stainless steelscrews,allcompleteas perarchitecturaldrawingsand fiklling the gap between aluminium and wall with PU sealentthedirectionsofEngineer-in-charge.(Glazingandpaneling to be paid for separately) :Forshuttersofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision forfixingoffittingswhereverrequiredincludingthecostofPVC / neoprene gasket required (Fittings shallbepaid forseparately).Powdercoatedaluminium(minimumthicknessofpowder coating 50 micron). |
| 28 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative lamination on both sides Make :- GVK/Novapan/Merico |
| 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) Make :- Saint Gobind/Modi Guard/Atul |
| 30 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Make :- Godrej or Equivalent |
| 31 | Providing and fixing aluminium double bend handle ofwith SS screws etc. complete as per direction of Engineer-inchargePowder coated minimum thickness 50 micron aluminium |
| 32 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 33 | Supplying and applying Blown or Residual bituminou applied hot at 1.73. Kg/Sqmon roof and upto 300 on Vertical wall surfaceas per direction of Engineer in Charge |
| 34 | Supplying and filling in Roof with , Brick Aggregate ( 40 mm nominal size) ramming, consolidating in required slope and packing complete to fill the depth in slab panels first floor and dressing complete as per direction of Engineer in Charge |
| 35 | Providing &fixing aluminum composite paneling 3mm thick on wall, partition, facia ,column etc etc at required place as per direction of Engineer in-charge. The ACP be exterior grade of any metallic colour, Alstone, or equivalent on frame work 1\"1/2\" x1\"x2mm (standard aluminums section). The aluminum section to be anchored to existing wall etc with screw, desh fasteners etc. The size, c/c spacing of ACP be as per the site adjustment but must be uniform spacing. The joints to be filled with silicon of DOWcoming /wacker make. |
| 36 | Finishing walls/Roofwith Damp Proof Paint with additives of required shade (Two coats ). including priming coat of one coat ofprimer appliedMake :- Asian Damp Proof paint or Equivalent |
| 37 | P/L 2mm thick PVC flooring with adhesive of approved brand all complete as directed by Engineer in charge. Make Tusker or equivalent. |
| 38 | Carrying out petty jobs of welding workswith necessaqry tools, welding set &rods etc. for petty works at diffrent locations which can not be measured as directed by engineer in charge. |
AI Tender Summary
Tender Timeline
Nov 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender