|
| 1 | Steel Rule 30 cm | 30 cm |
| 2 | Steel Rule 60 cm. | 60 cm. |
| 3 | Straight edge steel | 45 cm |
| 4 | Surface plate CI / Granite. | 45 x 45 cm |
| 5 | Universal scribing block | 22 cm. |
| 6 | V-Block pair with clamps | 7 cm and 15 cm |
| 7 | Square adjustable blade. | 15 cm |
| 8 | Angle plate. | 10 x 20 cm |
| 9 | Spirit Level metal | 15 cm |
| 10 | Punch letter set. | 3 mm |
| 11 | Punch number set. | 3 mm |
| 12 | Punch hollow | 6 mm to 19 set of 5 |
| 13 | Punch round | 3mm x 4 mm set of 2 |
| 14 | Portable hand drill (Electric) | 0 to 6 mm |
| 15 | Drill twist straight shank 1.5 to 12 mm by 0.5 mm | 1.5 to 12 mm by 0.5 mm |
| 16 | Drill twist straight shank | 8 mm to 15 mm by ½ mm |
| 17 | Taps and dies complete set in box B.A | Standard |
| 18 | Taps and dies complete set in box with-worth. | Standard |
| 19 | Taps and dies complete set in box | 3-18 mm set of 10 |
| 20 | File warding smooth | 15 cm |
| 21 | File knife edge smooth | 15 cm |
| 22 | File cut saw smooth | 15 cm |
| 23 | File Rounded edge smooth | 15 cm |
| 24 | File triangular smooth | 15 cm |
| 25 | File round second cut 20 cm | 20 cm |
| 26 | File square second cut 15 cm | 15 cm |
| 27 | File square second cut 25 cm | 25 cm |
| 28 | Feeler gauge | 10 blades |
| 29 | File triangular second cut.15 cm | 20 cm |
| 30 | File triangular second cut. | 15 cm |
| 31 | File flat second cut. | 30 cm |
| 32 | File flat bastard | 20 cm |
| 33 | File flat bastard. | 30 cm |
| 34 | File half round second cut. | 25 cm |
| 35 | File Swiss type needle. | set of 12 |
| 36 | File round bastard. | 30 cm |
| 37 | File hand second cut. | 15 cm |
| 38 | Card file. | standard |
| 39 | Oil Stone | 15 cm x 5 cm x 2.5 cm |
| 40 | Stone carborandum | 15 cm x 5 cm x 5 cm x 4 cm. |
| 41 | Oil Can. | 0.25 litres |
| 42 | Pliers combination | 15 cm |
| 43 | Soldering Iron | 350 gm. |
| 44 | Blow Lamp | 0.50 liters. |
| 45 | Spanner D.E. | 6 -26 mm set of 10 pcs. |
| 46 | Spanner adjustable | 15 cm |
| 47 | Interchangeable ratchet socket set with a 12 mm driver, & attachments. | sized10-32 mm set of 18 socket |
| 48 | Box spanner set with Tommy bar. | 6-25 mm set of 8 |
| 49 | Glass magnifying | 7 cm |
| 50 | Clamp toolmaker | 5 cm and 7.5 cm set of 2. |
| 51 | Clamp “C” 5 cm | 5 cm |
| 52 | Clamp “C” | 10 cm |
| 53 | Hand Reamer adjustable cover | max 9 ,12,18mm – set of 3 |
| 54 | Hand Reamer taper | 4 -9mm set of 6 OR 4 -7 mm setof 4. |
| 55 | Reamer parallel | 12 – 16mm set of 5. |
| 56 | Scrapeer flat | 15 cm. |
| 57 | Scrapeer triangular | 15 cm. |
| 58 | Scrapeer half round | 15 cm. |
| 59 | Chisel cold cross cut | 9 mm |
| 60 | Chisel cold flat 19 mm | 19 mm |
| 61 | Chisel cold round nose. | 9 mm |
| 62 | Stud Extractor EZY – out | Standard |
| 63 | Combination Set. | 30 cm |
| 64 | Micrometer outside. | 0 – 25 mm |
| 65 | Micrometer inside with extension rods. | 25 – 50 mm |
| 66 | Vernier caliper | 15 cm |
| 67 | Vernier height gauges. | 30 cm |
| 68 | Vernier bevel protractor. | For ITI Fitter Trainee |
| 69 | Screw pitch gauge. | For ITI Fitter Trainee |
| 70 | Wire gauge, metric standard. | For ITI Fitter Trainee |
| 71 | Drill twist Taper Shank | 12 mm to 25 mm x 1.5. |
| 72 | Drill chuck | 12 mm. |
| 73 | Pipe wrench | 40 cm |
| 74 | Pipe vice | 100mm |
| 75 | Adjustable pipe die set cover pipe | size 15, 20, 25,32,38,50 mmwith die stock |
| 76 | Wheel dresser | One for 4 units |
| 77 | Machine vice.10 cm | 10 cm |
| 78 | Machine vice.15 cm | 15 cm |
| 79 | Sleeve drill Morse. | 0 – 1, 1 – 2, 2 – 3 |
| 80 | Vice bench jaws. | 12 cm |
| 81 | Vice leg jaw. | 10 cm |
| 82 | Lathe tools H.S.S. tipped set. | Single point cutting tool |
| 83 | Lathe tools bit.6 mm x 75 mm | 6 mm x 75 mm |
| 84 | Lathe tools bit.8 mm x 75 mm | 8 mm x 75 mm |
| 85 | Lathe tools bit. | 10 mm x 85mm |
| 86 | Arm strong type tool bit holder R.H. | Standard |
| 87 | Arm strong type tool bit holder L.H. | Standard |
| 88 | Arm strong type tool bit holder straight. | Standard |
| 89 | Bench working. | 240 x 120 x 90 cm |
| 90 | Machine vice. | 100mm |
| 91 | Wing compass. | 25.4 cm or 30 cm |
| 92 | Hand hammer with handle. | 1 kg. |
| 93 | Torque wrench | 14 to 68 Nm |
