Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work, Garhshanker-Punjab

TDR : 29746500

Tender Notice
Corrigendum Details
BOQ

Expired

Garhshanker , Punjab

Tender Brief : Corrigendum : Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work

Document Fees
₹ 100000 /-

EMD
₹ 15788524.0 /-

Tender Value
₹ 78.94 Crore /-

Submission Date
22-11-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	11-11-2021	Clause 29	Other	22-11-2021

Name of Work: CONSTRUCTION OF SIRI GURU RAVIDASS MEMORIAL AT KHURALGARH SAHIB, TEHSIL: GARHSHANKER, DISTT.: HOSHIARPUR (BALANCE WORK)

Sl. No.	Item Description
1	Building ZONE -1
2	EARTH WORK
3	Supplying and filling cinder on roof (Ist story) including light ramming
4	CENTRING AND SHUTTERING WORK
5	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
6	Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc.
7	CONCRETE WORK
8	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concretemixer volumetric type
9	BRICK WORK
10	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
11	HOISTING AND ROOFING WORK
12	Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allowmovement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
13	Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
14	Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.
15	FLOORING AND CLADDING WORK
16	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
17	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
18	50mm thick ironite ( Metallic Floor Hardner to be mixed with Granolithic topping for heavy duty floors) floor consisiting of 40mm thick cement concrete 1:2:4 base and top layer 10mm thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6mm gauge by volume finished smooth with hard rubbing
19	Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana, Doongri, Adanga viened and chack Doongri with grey stretches. Slabs sizes above 0.50 sqm
20	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
21	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
22	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
23	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
24	Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
25	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
26	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
27	Plain Cement Concrete Pavement Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 gradeconforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications
28	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
29	PLASTER AND POINTING WORK
30	10mm thick Cement Plaster 1:4
31	12.5 mm thick cement plaster 1:5
32	20mm thick cement plaster 1:5 in two coat work
33	PAINTING WORK
34	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
35	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
36	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior / internal surface
37	Spirit polishing two coats including a coat of wood filler on wood work
38	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
39	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
40	WOOD WORK
41	Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mm x 150mm) (60mm x 150mm)
42	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing thesame in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
43	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
44	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and othersections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointedmechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
45	For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required
46	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle boardconforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.
47	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
48	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 4 mm thickness
49	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, fordoors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single pieceMS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge.
50	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250mm x 16mm
51	Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
52	Providing & fixing 30mm thick factory made Hollow PVC Profile PVC Flush door shutter consisting of panel of of 20mm thickness,frame made out of M.S. tubes of size of 19mm x 19mm x19 guage inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section using 5mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of panel etc. complete as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
53	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall bepaid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made.
54	Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).
55	Providing and Fixing Single Glazing with 6mm thick glass with high perfromance coating as per relevent codal provisions as per satisfaction of Engineer-in-Charge.
56	Providing and fixing aluminum grill 6.3 mm including cost of necessary fittings i.e. screws,u Type Beading etc. complete
57	Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete
58	STEEL WORK
59	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
60	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
61	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
62	Extra rate for steel reinforcement produced by primary producer
63	BUILDINGZONE -2A
64	BRICK WORK
65	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
66	HOISTING AND ROOFING WORK
67	Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, and the joints shall beprovided with aluminium strips at top and bottom as a seal complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Pollycarbonate sheet Multiwalled 12mm thick
68	Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allowmovement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
69	Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
70	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary
71	cross \"T\" of length 600 mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x600 mm and wallangle of size 24x24x0.3 mm and laying false ceiling tiles ofapproved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
72	Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.
73	FLOORING AND CLADDING WORK
74	Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Udaipur Green Marble Tiles ofthickness 12mm to 15mmSlabs sizes above 0.50 Sqm
75	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
76	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
77	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
78	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
79	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
80	PLASTER AND POINTING WORK
81	12.5 mm thick cement plaster 1:5
82	PAINTING WORK
83	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
84	Spirit polishing two coats including a coat of wood filler on wood work
85	Finishing walls with textured exterior / interior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
86	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
87	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
88	WOOD WORK
89	Teak wood wrought planed and fixed in position (Chowkats)
90	Imported Teak Wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position Panelled, glazed or glazed and panelled. 40mm thick (Single / Double Leaf)
91	Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.
92	Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect 8.0mm thick Plate glass(weight not less than 20 kg/ sqm)
93	Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per design and shape required 50mmx12mm
94	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000/3000mm)
95	Providing & fixing 1\"-6\" stainless steel handles ISI marked on door & window frames complete in all respect as per thedirections of Engineer-in-charge.
96	Providing & fixing 12\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per thedirections of Engineer-in-charge.
97	STEEL WORK
98	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
99	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
100	Extra rate for steel reinforcement produced by primary producer
101	BUILDING ZONE -2B
102	EARTH WORK
103	Supplying and filling sand on roof (Ist story) including light ramming
104	CENTRING AND SHUTTERING WORK
105	Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc.
106	CONCRETE WORK
107	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concretemixer volumetric type
108	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
109	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the sameshall be deducted )
110	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
111	BRICK WORK
112	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
113	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
114	HOISTING AND ROOFING WORK
115	Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allowmovement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
116	Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
117	Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.
118	FLOORING AND CLADDING WORK
119	50mm thick ironite ( Metallic Floor Hardner to be mixed with Granolithic topping for heavy duty floors) floor consisiting of 40mm thick cement concrete 1:2:4 base and top layer 10mm thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6mm gauge by volume finished smooth with hard rubbing
120	Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
121	Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana, Doongri, Adanga viened and chack Doongri with grey stretches. Slabs sizes above 0.50 sqm
122	Marble work of thickness 18-20 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Udaipur Green Marble Tiles of thickness 15mm to 20mm Slabs sizes above 0.50 sqm
123	Kota stone slab 20-25 mm thick flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
124	Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, includingrubbing and polishing
125	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
126	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
127	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
128	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
129	Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
130	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
131	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
132	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
133	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
134	Providing and Fixing Toilet Cubicles System made of 12mm thick compact laminated board size as per drawing x 2100mm, door siize 600mm x 1750mm over all height cubicals 2100mm including bottom gap of 150mm excessary SS 304 Grade such as U channel, F Channel, SS Top rail, SS coat huk, SS Privacy thumb turn SS Door Knob, SS Hing with cover, SS adjustable foot, rubber linning for groove screws and PVC Wall plug merino Make or euivalantcomplege in all respect as per specification and as desired by engineer in charge] (Payment to be made per square meter of the partition including doors)
135	PLASTER AND POINTING WORK
136	10mm thick Cement Plaster 1:4
137	12.5 mm thick cement plaster 1:5
138	20mm thick cement plaster 1:5 in two coat work
139	PAINTING WORK
140	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
141	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
142	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior / internal surface
143	Spirit polishing two coats including a coat of wood filler on wood work
144	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
145	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
146	WOOD WORK
147	Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mm x 150mm) (60mm x 150mm)
148	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing thesame in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
149	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
150	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and othersections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointedmechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
151	For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required
152	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle boardconforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.
153	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
154	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 4 mm thickness
155	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, fordoors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single pieceMS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge.
156	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250mm x 16mm
157	Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
158	Providing & fixing 30mm thick factory made Hollow PVC Profile PVC Flush door shutter consisting of panel of of 20mm thickness,frame made out of M.S. tubes of size of 19mm x 19mm x19 guage inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section using 5mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of panel etc. complete as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
159	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall bepaid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made.
160	Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).
161	Providing and Fixing Single Glazing with 6mm thick glass with high perfromance coating as per relevent codal provisions as per satisfaction of Engineer-in-Charge.
162	Providing and fixing aluminum grill 6.3 mm including cost of necessary fittings i.e. screws,u Type Beading etc. complete
163	Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete
164	STEEL WORK
165	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
166	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
167	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
168	Extra rate for steel reinforcement produced by primary producer
169	Building ZONE -3A
170	Earth Work
171	Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres
172	Fine grassing including uprooting rank vegetation and weeds by digging the area to a depth of 30 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growth after 10 to 15 days, mixing fertilizer and then fine dressing for planting new grass, including disposal of allrubbish with all leads and lifts, watering, weeding and maintenance for 30 days or till thick lawn is formed. Planting Selection no. 1 grass roots in rows 10 cm apart in both directions.
173	CENTRING AND SHUTTERING WORK
174	Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc.
175	CONCRETE WORK
176	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
177	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the sameshall be deducted )
178	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
179	BRICK WORK
180	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
181	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
182	HOISTING AND ROOFING WORK
183	Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allowmovement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
184	Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
185	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary
186	cross \"T\" of length 600 mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x600 mm and wallangle of size 24x24x0.3 mm and laying false ceiling tiles ofapproved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
187	Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionouscoating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface preprationand cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.
188	FLOORING AND CLADDING WORK
189	Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings
190	Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
191	Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana, Doongri, Adanga viened and chack Doongri with grey stretches. Slabs sizes above 0.50 sqm
192	Marble work of thickness 18-20 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Udaipur Green Marble Tiles of thickness 15mm to 20mm Slabs sizes above 0.50 sqm
193	Kota stone slab 20-25 mm thick flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
194	Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, includingrubbing and polishing
195	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
196	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
197	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
198	Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
199	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
200	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
201	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
202	Providing and Fixing Toilet Cubicles System made of 12mm thick compact laminated board size as per drawing x 2100mm, door siize 600mm x 1750mm over all height cubicals 2100mm including bottom gap of 150mm excessary SS 304 Grade such as U channel, F Channel, SS Top rail, SS coat huk, SS Privacy thumb turn SS Door Knob, SS Hing with cover, SS adjustable foot, rubber linning for groove screws and PVC Wall plug merino Make or euivalantcomplege in all respect as per specification and as desired by engineer in charge] (Payment to be made per square meter of the partition including doors)
203	PLASTER AND POINTING WORK
204	10mm thick Cement Plaster 1:4
205	12.5 mm thick cement plaster 1:5
206	20mm thick cement plaster 1:5 in two coat work
207	PAINTING WORK
208	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
209	Spirit polishing two coats including a coat of wood filler on wood work
210	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
211	WOOD WORK
212	Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mm x 150mm) (60mm x 150mm)
213	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing thesame in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
214	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
215	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and othersections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointedmechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
216	For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required
217	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle boardconforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.
218	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
219	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 4 mm thickness
220	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, fordoors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single pieceMS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge.
221	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250mm x 16mm
222	Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
223	Providing & fixing 30mm thick factory made Hollow PVC Profile PVC Flush door shutter consisting of panel of of 20mm thickness,frame made out of M.S. tubes of size of 19mm x 19mm x19 guage inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section using 5mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of panel etc. complete as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
224	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall bepaid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made.
225	Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).
226	Providing and Fixing Single Glazing with 6mm thick glass with high perfromance coating as per relevent codal provisions as per satisfaction of Engineer-in-Charge.
227	Providing and fixing aluminum grill 6.3 mm including cost of necessary fittings i.e. screws,u Type Beading etc. complete
228	Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete
229	STEEL WORK
230	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
231	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
232	Extra rate for steel reinforcement produced by primary producer
233	ZONE -3B
234	HOISTING AND ROOFING WORK
235	Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allowmovement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
236	Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
237	FLOORING AND CLADDING WORK
238	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
239	Lvl. 85.05
240	Lvl. 94.3
241	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
242	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
243	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
244	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
245	PLASTER AND POINTING WORK
246	20mm thick cement plaster 1:5 in two coat work
247	PAINTING WORK
248	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
249	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
250	STEEL WORK
251	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
252	BUILDING ZONE -3C
253	EARTH WORK
254	Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.
255	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outsidethe building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
256	Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres
257	Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer\"s specifications (i) In foundation pits, by treating the bottom & sides upto height of 300mm by uniformly spraying solution @ 5 Litre / Sqm (ii) In the refill earth on both sides of all built up walls @7.5 Litre / Running meter ( width - 300 mm, depth - 450 mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per Sqm.
258	CENTRING AND SHUTTERING WORK
259	Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)
260	Centering and shuttering for faces of walls, partitions,retaining walls and the like (vertical or battering) includingattached pilasters, buttresses etc when curved.
261	Below Ground Floor
262	Ground Floor
263	Centering and shuttering for columns (Square or rectangularor poly gonal in plain)
264	Below Ground Floor
265	Ground Floor
266	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
267	Below Ground Floor
268	Ground Floor
269	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
270	Below Ground Floor
271	Ground Floor
272	Centring and shuttering for stair cases with sloping withsoffits including risers and stringers.
273	Below Ground Floor
274	CONCRETE WORK
275	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
276	Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type
277	Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material
278	Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
279	Reinforced cement concrete M-40 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
280	Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
281	Below Ground Floor
282	Ground Floor
283	Reinforced cement concrete M-40 mechanically batch mixed using batch mixed using concrete mixer and vibrated by needlevibrator but excluding steel reinforcement centring and shuttering in superstructure.
284	Below Ground Floor
285	Ground Floor
286	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the sameshall be deducted )
287	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
288	BRICK WORK
289	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
290	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
291	Extra for c above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof for Brick Work/ Concrete Block/ Clay Block.
292	115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth
293	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
294	Extra for 115mm/100mm thick of walls done above 4 meters (where any single storey exceeds 4 meters in height) for every additional height of 2 meters or parts thereof for Brick Work/ Concrete Block/ Clay Block.
295	HOISTING AND ROOFING WORK
296	Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mmthick cement concrete 1:8:16
297	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
298	Supplying and filling cinder on roof (Ist story) including light ramming
299	Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings specifications and to the entire satisfaction of engineer-in- charge.
300	Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
301	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction ofEngineer-in- charge.
302	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
303	Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction ofEngineer- in- charge.
304	Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry cost of neat cement using 2.75kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in- charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement :5 coarse sand) admixed with water proofing ompound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement L5 coarse sand) admixed with water proofing compound conforming to IS :2645 and approved by Engineer.
305	Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to befixed in horiziontal direction at 600mm center to centerso as to form a grid of 600mm x 600mm.
306	Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles areto be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre ) roll and two coats of primersuitable for panelling as per manufacturer\"s specificationas per direction of Engineer-in-Charge all complete.
307	Water proofing treatment of RCC structures (after making the surface clean, dry & free from all internal voids or honey combs ), with Zycosil /equivalent water proofing Solution (1 litre of Zycosil / equivalent & 20 litres of potable waterstirred first & 2 litres of Zycoprime / equivalent added and stirred (total 23 litres)) using two coats till it meets the saturation level and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls.
308	Water proofing of roof terraces, Basements, Retaining Walls, Water tanks etc with Zydex Zycoprime / Elastobar / Equivalent solution so as to form a water-resistant cementitious bondingcoat and to form on-site seamless cross-linked elastomeric membrane on the concrete surface to reduce its porosity. Creating a cementitious elastomeric polymeric membrane of Elastobar and Zycoprime/Equivalent after application ofZycosil & Zycoprime Solution in New Construction. Take equal parts of Elastobar and Cement and form a paste. Add little water to the paste to make it brushable. Apply the paste on surface with brush. Leave the surace for drying for at least 4 - 6 hours to get elastomeric membrane. After this application, make one more layer of rough cementatios membrane using mixture of 1Part of Zycoprime + 1 Part of Cement + 1 Part of fine sand. Apply paste on the surface with a brush to make a rough texture. Now your surface is ready to bond well with tiles/screed.
309	Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.
310	Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mmthick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thicksheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 20 mm thick beveled tegular mineral fibre false ceilingtile (NRC 0.7)
311	FLOORING AND CLADDING WORK
312	Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
313	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
314	Below Ground Floor
315	Ground Floor
316	Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
317	Below Ground Floor
318	Ground Floor
319	40mm thick grey polished flooring cement concrete 1:2:4 toping finished with 3mm thick neat coat of cement rubbed and polished using mechanical mixer for mixing of material
320	Extra labour for projected nosing of stair case of any shape and design.
321	Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc.
322	Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings
323	Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
324	Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana, Doongri, Adanga viened and chack Doongri with grey stretches. Slabs sizes above 0.50 sqm
325	Marble work of thickness 18-20 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Udaipur Green Marble Tiles of thickness 15mm to 20mm Slabs sizes above 0.50 sqm
326	Kota stone slab 20-25 mm thick flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
327	Below Ground Floor
328	Ground Floor
329	Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, includingrubbing and polishing
330	Below Ground Floor
331	Ground Floor
332	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
333	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
334	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
335	Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts thedesired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.
336	Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
337	Below Ground Floor
338	Ground Floor
339	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
340	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
341	Providing & fixing of 4.5 mm thick Carpet tile flooring not made of 100 % polyfine polypropleyne natural with dual baching, Primary baching with PVC & Secondary with fibar glass form approved make in required colours, shades, Complete as per manufacture\"s specification including cost of special quality adhesive complete fixed in position to the entire satisfaction of engineer in charge.
342	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
343	PLASTER AND POINTING WORK
344	10mm thick Cement Plaster 1:4
345	Below Ground Floor
346	Ground Floor
347	12.5 mm thick cement plaster 1:5
348	Below Ground Floor
349	Ground Floor
350	20mm thick cement plaster 1:5 in two coat work
351	Below Ground Floor
352	Ground Floor
353	External wall surface
354	PAINTING WORK
355	White washing (Three coat)
356	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
357	Below Ground Floor
358	Ground Floor
359	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
360	Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
361	Spirit polishing two coats including a coat of wood filler on wood work
362	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
363	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
364	WOOD WORK
365	Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mm x 150mm) (60mm x 150mm)
366	Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999)Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
367	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
368	Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per design and shape required 50mmx12mm
369	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm)
370	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and othersections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointedmechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
371	For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required
372	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle boardconforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.
373	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
374	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 4 mm thickness
375	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, fordoors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single pieceMS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge.
376	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250mm x 16mm
377	Providing & fixing 46mm thick fully flush double skin fire door shutter of 120 minutes fire rating confirming to IS:3614(Part II),tested & certified by CBRI (Roorki). Door frame & leaf shall be manufactured from 1.6mm (16 gauge) & 1.2mm (18guage) minimum thick galvanised steel sheet.The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. The edges should be interlocked with lock seam. All doors shall be finished with polyurethane aliphatic grade paint of approved colour. The door shall have passed minimum 250 hours of salt spray test.
378	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall bepaid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made.
379	Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).
380	Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.(Area upto 0.75 sqm)
381	Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.
382	For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
383	Providing and fixing aluminum grill 6.3 mm including cost of necessary fittings i.e. screws,u Type Beading etc. complete
384	Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete
385	Providing & Fixing AMBRE-FAMELINE Aluminium 750 AF Louvre is a special type of louver with width of 150mm. The thickness of the aluminium sheet is 1.2mm and with the total length of 0.6meters of each panel. The Aluminium 750 AF Louvre then attached to the special extruded frame with length of 6meters support which incorporated to the main frame of glass to provide firmness and stability. The panel are locked by a special pin in Stainless Steel 304, in a module of C/C finalize by the architect. PAINT FINISH: Electrostatically Polyester Powder Coating Gloss Level 35%, minimum Thickness 60 micron tested according to ASTM B 117. Or Electrostatically Baked Enamel Spray Painting (Acrylic resin) Gloss Level 35%, minimum Thickness 30 micron. Paint is as per AMBRE-FAMELINE exterior paint finish as per manufacturer\"s specification.
386	Providing and Fixing Toilet Cubicles System made of 12mm thick compact laminated board size as per drawing x 2100mm, door siize 600mm x 1750mm over all height cubicals 2100mm including bottom gap of 150mm excessary SS 304 Grade such as U channel, F Channel, SS Top rail, SS coat huk, SS Privacy thumb turn SS Door Knob, SS Hing with cover, SS adjustable foot, rubber linning for groove screws and PVC Wall plug merino Make or euivalantcomplege in all respect as per specification and as desired by engineer in charge] (Payment to be made per square meter of the partition including doors)
387	STEEL WORK
388	Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For plates and trussed girders etc. for bridge of span more than 15 metres but upto 30 mts. Span including cost of all machinery i.e hydra crane etc
389	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
390	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
391	Below Ground Floor
392	Ground Floor
393	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
394	Extra rate for steel reinforcement produced by primary producer
395	ZONE -4
396	EARTH WORK
397	Eaxcavation in Soil(any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom sand side slopes, in accordance with requirements of lines, grades and cross sections, including all lift and combined lead up to 60 mtr.
398	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth In 15 cm layers including ramming, watering and consolidating lead upto 30 metres
399	ProvidingandapplyingAntiTermite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containing chloropyrifos systemic insecticide diluted to manufacturer\"sspecifications(i)In foundationpits,bytreatingthebottom& sides up to height of 300mm by uniformly spraying solution @ 5 Litre / sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter (width - 300 mm, depth - 450 mm) (iii)Before laying the floor, by uniformly sprinkling the top surface oftheconsolidated earthwithintheouter perimeter @ 5 Litre solution per sqm.
400	CONCRETE WORK
401	Cement concrete 1:4:8 with stone ballast of 40mm guage. Using volumetric type concrete mixer
402	Cement concrete 1:3:6 with stone ballast or shingle 40 mm guage. using concrete mixing volumetric type
403	Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrater but excludingsteel reinforcement,centring and shuttering in foundation and plinth.
404	Reinforced cement concrete M-30 mechanicaly batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrater but excludingsteel reinforcement,centring and shuttering in superstructure.
405	Ground floor
406	First Floorwith Extra cost of subsequent storey
407	Second Floor with Extra cost of subsequent storey
408	Third Floor with Extra cost of subsequent storey
409	FourthFloor with Extra cost of subsequent storey
410	5th Floor with Extra cost of subsequent storey
411	6th Floor with Extra cost of subsequent storey
412	7th Floor with Extra cost of subsequent storey
413	8th Floor with Extra cost of subsequent storey
414	9th Floor with Extra cost of subsequent storey
415	10th Floor with Extra cost of subsequent storey
416	11th Floor with Extra cost of subsequent storey
417	Extra for using computerized concrete batch mixingplant includingcarriage by transitmixerwith in1 km lead. (Note- Where concrete mixer is already included in the rate the same shall be deductedbefore adding this item)
418	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
419	CENTRING AND SHUTTERING WORK
420	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
421	Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when curved.
422	Basement Floor
423	Ground floor
424	First Floor
425	Second floor
426	Thrid Floor
427	Fourth Floor
428	5th Floor
429	6th Floor
430	7th Floor
431	8th Floor
432	9th Floor
433	10th Floor
434	11th Floor
435	Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
436	Basement Floor
437	Ground floor
438	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
439	Basement Floor
440	Ground floor
441	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
442	Basement Floor
443	Ground floor
444	First Floor
445	Second floor
446	Thrid Floor
447	Fourth Floor
448	5th Floor
449	6th Floor
450	7th Floor
451	8th Floor
452	9th Floor
453	10th Floor
454	11th Floor
455	Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
456	Basement Floor
457	Ground floor
458	First Floor
459	Second floor
460	Thrid Floor
461	Fourth Floor
462	5th Floor
463	6th Floor
464	7th Floor
465	8th Floor
466	9th Floor
467	10th Floor
468	11th Floor
469	BRICK WORK
470	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
471	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
472	ground Floor
473	First Floorextra for additional story uptu 4 mtrs abovethe top of structural roof of story
474	Second Floorextra for additional story uptu 4 mtrs abovethe top of structural roof of story
475	Third Floorextra for additional story uptu 4 mtrs abovethe top of structural roof of story
476	fourth Floorextra for additional story uptu 4 mtrs abovethe top of structural roof of story
477	5thfloor extra for additional story uptu 4 mtrs abovethe top of structural roof of story
478	6thfloor extra for additional story uptu 4 mtrs abovethe top of structural roof of story
479	7thfloor extra for additional story uptu 4 mtrs abovethe top of structural roof of story
480	8thfloor extra for additional story uptu 4 mtrs abovethe top of structural roof of story
481	9thfloorextra for additional story uptu 4 mtrs abovethe top of structural roof of story
482	10thfloorextra for additional story uptu 4 mtrs abovethe top of structural roof of story
483	115 mm thick brick wall laid in cement mortar 1:4withoutreinforcement infoundationand plinth.
484	FLOORING AND CLADDING WORK
485	Screed 50mm thick of cement concrete 1:8:16 to be laid below the toping.
486	Basement Floor
487	Ground floor
488	First Floor
489	Second floor
490	Thrid Floor
491	Fourth Floor
492	5th Floor
493	6th Floor
494	7th Floor
495	8th Floor
496	9th Floor
497	10th Floor
498	11th Floor
499	Kotah stone tile flooring 20mm to 30mm thick over 12.5mm thick base of cement mortar 1:3 laid and jointed with neat cemetn slurry mixed with pigment to match the shade of stone including rubbing & polishing.
500	Basement Floor
501	Ground floor
502	Kotah stone tile 20mm thick in skirting riser of steps dado walls and pillars laid in 12.5mm thick base of cement mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing & polishing .
503	Basement Floor
504	Ground floor
505	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
506	Basement Floor
507	Ground floor
508	First Floor
509	Second floor
510	Thrid Floor
511	Fourth Floor
512	5th Floor
513	6th Floor
514	7th Floor
515	8th Floor
516	9th Floor
517	10th Floor
518	11th Floor
519	Extra labour for projected nosing of stair case of any shape and design.
520	Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc.
521	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
522	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
523	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
524	PLASTER AND POINTING WORK
525	12.5mm thick cement plaster 1:5 (for internal wall)
526	Basement Floor
527	Ground floor
528	First Floor
529	Second floor
530	Thrid Floor
531	Fourth Floor
532	5th Floor
533	6th Floor
534	7th Floor
535	8th Floor
536	9th Floor
537	10th Floor
538	11th Floor
539	10mm thick Cement Plaster 1:4
540	Basement Floor
541	Ground floor
542	First Floor
543	Second floor
544	Thrid Floor
545	Fourth Floor
546	5th Floor
547	6th Floor
548	7th Floor
549	8th Floor
550	9th Floor
551	10th Floor
552	11th Floor
553	20mm thick cement plaster 1:5 in two coat work
554	Basement Floor
555	Ground floor
556	First Floor
557	Second floor
558	Thrid Floor
559	Fourth Floor
560	5th Floor
561	6th Floor
562	7th Floor
563	8th Floor
564	9th Floor
565	10th Floor
566	11th Floor
567	PAINTING WORK
568	Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
569	Basement Floor
570	Ground floor
571	First Floor
572	Second floor
573	Thrid Floor
574	Fourth Floor
575	5th Floor
576	6th Floor
577	7th Floor
578	8th Floor
579	9th Floor
580	10th Floor
581	11th Floor
582	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
583	Basement Floor
584	Ground floor
585	First Floor
586	Second floor
587	Thrid Floor
588	Fourth Floor
589	5th Floor
590	6th Floor
591	7th Floor
592	8th Floor
593	9th Floor
594	10th Floor
595	11th Floor
596	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
597	Basement Floor
598	Ground floor
599	First Floor
600	Second floor
601	Thrid Floor
602	Fourth Floor
603	5th Floor
604	6th Floor
605	7th Floor
606	8th Floor
607	9th Floor
608	10th Floor
609	11th Floor
610	Applying pink primer or aluminium priming coaton wood work including preparation of surface knothing and stopping etc.(with special quality paint)
611	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
612	Applying priming coat with metal primer on new steel or iron work including preparation of surface. (with special quality paint)
613	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
614	Spirit polishing two coats including a coat of wood filler on wood work
615	WOOD WORK
616	Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mm x 150mm) (60mm x 150mm)
617	Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999)Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
618	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
619	Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per design and shape required 50mmx12mm
620	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm)
621	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250mm x 16mm
622	Providing & fixing 46mm thick fully flush double skin fire door shutter of 120 minutes fire rating confirming to IS:3614(Part II),tested & certified by CBRI (Roorki). Door frame & leaf shall be manufactured from 1.6mm (16 gauge) & 1.2mm (18guage) minimum thick galvanised steel sheet.The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. The edges should be interlocked with lock seam. All doors shall be finished with polyurethane aliphatic grade paint of approved colour. The door shall have passed minimum 250 hours of salt spray test.
623	STEEL WORK
624	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
625	Gr. Floor
626	First Floor
627	Second floor
628	Thrid Floor
629	Fourth Floor
630	5th Floor
631	6th Floor
632	7th Floor
633	8th Floor
634	9th Floor
635	10th Floor
636	11th Floor
637	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
638	Wroughtironandmildsteelladders,framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
639	Providing and fixing Alloy steel Anchor bolt plates, dashfasteners, angles, channels, shelves and fabrication for Fixing pre -cast slab in fins
640	Extra rate for steel reinforcement produced by primary producer
641	Structural Steel Work in highrise fins
642	Providing, fabricating and erecting in position Structural steel work for girders , beams, trusses , portals, columns, stairs, runners, purlins, bracings, using the rolled steel structural members conforming to grade 355 (Yield Strength in N/mm2) of TATA / CORUS / JINDAL / ESSAR make (conforming to BS EN 100025) in rolled sections such as universal beams, universal columns, channels etc, and in built-up sections including straightening, welding , insert plates and angles with hold fasts etc., of all sizes and shapes and as per detail design, drawings andspecifications for various spans, fillet welding, butt welding as specified in drawings, butt weld splicing, necessary edge preparation for butt welding, etc., all as per specifications and drawings. The weight of bolts and nuts will be paid separately. The rate includes necessarymachining/grinding/smoothening of membersand all weld joints before grid/shot blasting to give a neat and clean appearance. The rate also includes the erection machinery/equipment, temporary supporting structures and members required for erection etc complete. The rate shall include preparation of detail shop drawings on 3D Software TEKLA Structures (X-steel) & Revit .Fabrication can only be taken after approval of shop drawings by Consultant. The contactor shall prepare the connection design calculation and fabrication shop drawings, based on the forces given on the drawings for all the connections / splices, discussing with Architects regardingaesthetics. These shall be approved by the structural consultant before proceeding further.Contactor has also to submitt a complete erection methology of the buiding considering thestability during erection.
643	Providing, fabricating and erecting in position Structural steel work for girders , beams, trusses , portals, columns, stairs, runners, purlins, bracings, using the rolled steel structural members conforming to grade 355 (Yield Strength in N/mm2) of TATA / CORUS / JINDAL / ESSAR make (conforming to BS EN 100025) in rolled sections such as universal beams, universal columns, channels etc, and in built-up sections including straightening, welding, bending as per architectural radius , insert plates and angles with hold fasts etc., of all sizes and shapes and as per detail design, drawings andspecifications for various spans, fillet welding, butt welding as specified in drawings, buttweld splicing, necessary edge preparation for butt welding, etc., all as per specificationsand drawings. The weight of bolts and nuts will be paid separately. The rate includes necessary machining/grinding/smoothening of members and all weld joints before grid/shot blasting to give a neat and clean appearance. The rate also includes the erection machinery/equipment, temporary supporting structures and members required for erection etc complete. The rate shall include preparation of detail shop drawings on 3D Software TEKLA Structures (X-steel) & Revit .Fabrication can only be taken after approval of shop drawings by Consultant. The contactor shall prepare the connection design calculation andfabrication shop drawings, based on the forces given on the drawings for all theconnections / splices, discussing with Architects regarding aesthetics. These shall beapproved by the structural consultant before proceeding further. Contactor has also tosubmitt a complete erection methology of the buiding considering the stability duringerection.
644	All steel surfaces shall be abrasive blast cleaned to Sa 2.5(ISO8501-1:1988) or SSPCSP6, using a blend of shot and grit. If oxidation has occurred between blasting and paint application, the surface should be reblasted to the specified visual standard. Any surface defects revealed by the blast cleaning process should be filled/ ground or treated suitably. Surface profile of 40-50 microns (1.5-2 mils) is recommended. Before blasting, surfaces shall be washed and cleaned by waterjet / Solvent to remove surface contamination/ grease etc. The painting work shall be carried out by applicator, approved bymanufacturer. Also manufacturer shall depute their technical representative to inspect andcertify the workmanship & quality of the work at every stage. Contractor shall submit guarantee on Rs.100 Stamp Paper from manufacturer for the executed work for the specified period, against deterioration, loss of gloss, colour, retention etc., as per approved format erection.Painting system for steel structures 2 coat of Zinc rich primer and 2 coat of PU paint colour as per approvals
645	Providing fabricating and fixing for all connections of steel members MS galvanized bolts, nuts washers, etc of grade 10.9/12.6, of any diameter between M-20 mm to M-40 dia 500mm long with nut and viser etc of grade 10.9 as per IS:1367, this include drill of holes, chemical anchor and chemical from Hilti/Dwalt/Qwik
646	Providing fabricating and fixing for all connections of steel members MS bolts, nuts washers, etc of grade 10.9/12.6, of any diameter between M20 to M-32 and long 800mm to 1000mm long using for foundationa as per IS:1367. Includes drilling of holes, grouting of
647	Scaffolding, supports, zigs and fixtures
648	BUILDING ZONE -5
649	EARTH WORK ZONE-5
650	Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.
651	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outsidethe building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
652	Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer\"s specifications (i) In foundation pits, by treating the bottom & sides upto height of 300mm by uniformly spraying solution @ 5 Litre / Sqm (ii) In the refill earth on both sides of all built up walls @7.5 Litre / Running meter ( width - 300 mm, depth - 450 mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per Sqm.
653	CENTRING AND SHUTTERING WORK
654	Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)
655	Centering and shuttering for faces of walls, partitions,retaining walls and the like (vertical or battering) includingattached pilasters, buttresses etc when curved.
656	Below Ground Floor
657	Centering and shuttering for columns (Square or rectangularor poly gonal in plain)
658	Below Ground Floor
659	Ground Floor
660	Terrace Floor
661	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
662	Below Ground Floor
663	Ground Floor
664	Terrace Floor
665	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
666	Below Ground Floor
667	Ground Floor
668	Terrace Floor
669	Centring and shuttering for stair cases with sloping withsoffits including risers and stringers.
670	Below Ground Floor
671	Ground Floor
672	Terrace Floor
673	CONCRETE WORK
674	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
675	Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material
676	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
677	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
678	Ground Floor
679	Terrace Floor
680	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the sameshall be deducted )
681	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
682	BRICK WORK
683	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
684	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
685	Extra for c above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof for Brick Work/ Concrete Block/ Clay Block.
686	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
687	Extra for 115mm/100mm thick of walls done above 4 meters (where any single storey exceeds 4 meters in height) for every additional height of 2 meters or parts thereof for Brick Work/ Concrete Block/ Clay Block.
688	HOISTING AND ROOFING WORK
689	Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mmthick cement concrete 1:8:16
690	Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3
691	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
692	Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings specifications and to the entire satisfaction of engineer-in- charge.
693	Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allowmovement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
694	Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
695	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction ofEngineer-in- charge.
696	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
697	Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction ofEngineer- in- charge.
698	Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry cost of neat cement using 2.75kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in- charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement :5 coarse sand) admixed with water proofing ompound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement L5 coarse sand) admixed with water proofing compound conforming to IS :2645 and approved by Engineer.
699	FLOORING AND CLADDING WORK
700	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
701	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
702	Ground Floor
703	Terrace Floor
704	Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping using mechanical mixer for mixing of material
705	Ground Floor
706	Terrace Floor
707	Extra labour for projected nosing of stair case of any shape and design.
708	Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc.
709	Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings
710	Ground Floor
711	Terrace Floor
712	Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
713	Ground Floor
714	Terrace Floor
715	Kota stone slab 20-25 mm thick flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
716	Ground Floor
717	Terrace Floor
718	Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, includingrubbing and polishing
719	Ground Floor
720	Terrace Floor
721	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
722	Ground Floor
723	Terrace Floor
724	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
725	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
726	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
727	Ground Floor
728	Terrace Floor
729	Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
730	Ground Floor
731	Terrace Floor
732	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
733	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
734	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
735	PLASTER AND POINTING WORK
736	10mm thick Cement Plaster 1:4
737	Ground Floor
738	Terrace Floor
739	12.5 mm thick cement plaster 1:5
740	Ground Floor
741	Terrace Floor
742	20mm thick cement plaster 1:5 in two coat work
743	Ground Floor
744	Terrace Floor
745	PAINTING WORK
746	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
747	Ground Floor
748	Terrace Floor
749	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
750	Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
751	Ground Floor
752	Terrace Floor
753	Spirit polishing two coats including a coat of wood filler on wood work
754	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
755	Ground Floor
756	Terrace Floor
757	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
758	WOOD WORK
759	Chowkats of Imp. Teak Woodconfirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm)Double Rebate (60mm x 150mm) (60mm x 150mm)
760	Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
761	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
762	Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per design and shape required 50mmx12mm
763	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm)
764	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and makingnecessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
765	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250mm x 16mm
766	Providing & fixing 46mm thick fully flush double skin fire door shutter of 120 minutes fire rating confirming to IS:3614(Part II),tested & certified by CBRI (Roorki). Door frame & leaf shall be manufactured from 1.6mm (16 gauge) & 1.2mm (18guage) minimum thick galvanised steel sheet.The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. The edges should be interlocked with lock seam. All doors shall be finished with polyurethane aliphatic grade paint of approved colour. The door shall have passed minimum 250 hours of salt spray test.
767	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall bepaid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made.
768	Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).
769	Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.(Area upto 0.75 sqm)
770	Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.
771	For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
772	Providing and fixing aluminum grill 6.3 mm including cost of necessary fittings i.e. screws,u Type Beading etc. complete
773	Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete
774	Providing & Fixing AMBRE-FAMELINE Aluminium 750 AF Louvre is a special type of louver with width of 150mm. The thickness of the aluminium sheet is 1.2mm and with the total length of 0.6meters of each panel. The Aluminium 750 AF Louvre then attached to the special extruded frame with length of 6meters support which incorporated to the main frame of glass to provide firmness and stability. The panel are locked by a special pin in Stainless Steel 304, in a module of C/C finalize by the architect. PAINT FINISH: Electrostatically Polyester Powder Coating Gloss Level 35%, minimum Thickness 60 micron tested according to ASTM B 117. Or Electrostatically Baked Enamel Spray Painting (Acrylic resin) Gloss Level 35%, minimum Thickness 30 micron. Paint is as per AMBRE-FAMELINE exterior paint finish as per manufacturer\"s specification.
775	Providing and Fixing Toilet Cubicles System made of 12mm thick compact laminated board size as per drawing x 2100mm, door siize 600mm x 1750mm over all height cubicals 2100mm including bottom gap of 150mm excessary SS 304 Grade such as U channel, F Channel, SS Top rail, SS coat huk, SS Privacy thumb turn SS Door Knob, SS Hing with cover, SS adjustable foot, rubber linning for groove screws and PVC Wall plug merino Make or euivalantcomplege in all respect as per specification and as desired by engineer in charge] (Payment to be made per square meter of the partition including doors)
776	STEEL WORK
777	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
778	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
779	Below Ground Floor
780	Ground Floor
781	Terrace Floor
782	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
783	Extra rate for steel reinforcement produced by primary producer
784	BUILDING NAME : EXTERNAL DEVELOPMENT WORK
785	Earth Work
786	Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.
787	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres
788	Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications.
789	CONCRETE WORK
790	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concretemixer volumetric type
791	Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type
792	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steelreinforcement centring and shuttering in foundation and plinth
793	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steelreinforcement centring and shuttering in superstructure.
794	Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded
795	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
796	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the same shall be deducted )
797	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
798	CENTRING AND SHUTTERING
799	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
800	Centering and shuttering for faces of walls, partitions,retaining walls and the like (vertical or battering) includingattached pilasters, buttresses etc when curved.
801	Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
802	Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc.
803	BRICK WORK
804	First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
805	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
806	HOISTING AND ROOFING WORK
807	Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.
808	Sand filling under floor and in wells of bridge foundation including handling withing 100 metres
809	Corrugated G.I. Sheet roofing 0.80 mm thick fixedwith galvanized iron J or L hooks 10mm dia, G.I.Limpot and bitumen washers complete excludingthe cost of purling rafters and trusses
810	FLOORING AND CLADDING WORK
811	SLOPE/PROTECTION SCREED OF 75 MM :Providing and laying weld-mesh reinforced or on renforced depending on site condition screed over the boards The slope built-up cum protection layer shall have a average thickness of 75 mm with a slope gradient of 1:100. It shall be laid to the required slope, level and finish as directed including curing by ponding for a minimum of 7 days. Of mini M20 grade concrete screed to be used.
812	Kota stone slab 20-25 mm thick flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
813	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
814	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
815	Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved byEngineer-in-Charge:
816	Providing and fixing of white river (Stone) pebbles size of 2\" to 2.50\" dia in natural colour at site of work including loading, unloading and carriage
817	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Bansi Paharpur Stone - Exposed face machine cut & table rubber with rough backing40mm thick
818	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
819	Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases
820	PLASTER WORK
821	20mm thick cement plaster in 1:5 in two coats work.
822	PAINTING WORK
823	Finishingwallswithacrylic smoothexterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
824	Applying priming coat with metal primer onnew steel or iron work including preparation of surface. (with special quality paint)
825	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
826	STEEL WORK
827	Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For plates and trussed girders etc. for bridge of span more than 15 metres but upto 30 mts. Span including cost of all machinery i.e hydra crane etc
828	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
829	Extra rate for steel reinforcement produced by primary producer
830	ROAD WORK
831	Compaction of earth work & Preparation of subgrade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers)
832	Construction of embankment with good quality earth obtainedfromborrowpitsincluding compensationofearth,loading,unloading, carriage to siteof work, spreading, grading to requiredslope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications (Lead-5.00km)
833	Construction of granular sub-base by providing material, spreading in uniform layers with motorgrader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications
834	Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications
835	Providing and applying primer coat with bitumenemulsion SS on prepared surface of granularbase including cleaning of road surface andspraying primer at the rate of 0.85kg/sqmcomplete as per technical clause 502 of MORT&Hspecifications
836	Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications
837	Providing and laying bituminous macadam 50mm to 75mm thick with batch type hot mix plant using crushed aggregates of specified grading premixedwith bituminous binder VG-30 @3.4%, laid over a previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications
838	Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified gradingpremixed in a Continuous type hot mix plant with bituminous binder VG-30 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with asmooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications
839	Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-30 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications
840	Providing & erecting \"W\" type metal beam crash barrier single sided comprising of 3mm thick corrugated sheet metal beam rail 70cm aboveroad or ground level fixed on channel vertical post 150x75x5mm spaced 2mtr centre to centre 1.80mtr high, 1.1mtr below road or ground level,all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 & IS:1364, metal beam rail to be fixed on the verticalpost with a spacer of channel section 150x75x5mm, 330mm long fixed firmly into ground with vertical hydraulic self driving machine forvertical post complete as per approved drawings and technical clause IRC: 119-2015.
841	Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications
842	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
843	Extra rate for steel reinforcement produced by primary producer such as SAIL/TATA/RINL
844	Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications
845	Sand filling under floor and in wells of bridgefoundation including handling withing 100 metres
846	HORTICULTURE WORK
847	Fine grassing including uprooting rank vegetation and weeds by digging the area to a depth of 30 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growth after 10 to 15 days, mixing fertilizer and then fine dressing forplanting new grass, including disposal of allrubbish with all leads and lifts, watering, weeding and maintenance for 30 days or till thick lawn is formed. Planting Selection no. 1 grass roots in rows 10 cm apart in both directions.
848	MS circular tree guard with wire mesh, having 4 No. legs of angle iron size 25x25x3mm, 1.80 mtr. height, 3 No rings of M.S Flats of 25 x 6 mm, 60cm dia andfixing of wire mesh size 50x75mm. Tree guard in two halves bolted together with 8mm dia & 30 mm long bolts, and fixing 250 mm X 100 mm iron plate, fixed inground with 1:2:4 cement concrete, complete in all respects.
849	Supplying and planting permanent trees in prepared pits and watering
850	Supplying and planting permanent shrubs in prepared pits and watering
851	Supplying and planting of ornamental trees (1\"-0\" height sapling) includingfilling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
852	Azadirachtha indica/Neem
853	Delonix regia/ Gulmohur
854	Kigelia pinnata/ Sausage tree
855	Peltophorum ferrugineum
856	Spathodea campanulate/ Fountain tree
857	Plumeria alba/ Temple tree, Champa
858	Maintenance of tree including fertilization, application of insecticide, watering, weeding, training, pruning, disposal of debris and other activities.
859	Maintenance of trees for the 1st year
860	Maintenance of trees for the 2nd year
861	Maintenance of trees for the 3rd year
862	Maintenance of trees for the 4th and 5th year (Cost per year)
863	Supplying and planting ofshrubs includingfilling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
864	Barleria cerstata
865	Dwarf allamanda
866	Dwarf nerium oleander
867	Dwarf hibiscus
868	Lemonia
869	Tab verigated
870	Ficus Longisland
871	Maintenance of shrubs for one year including training, pruning, fertilization, application of insecticide, watering and weeding.
872	Individual shrubs
873	Providing and fixing of white river (Stone) pebbles size of 2\" to 2.50\" dia in natural colour at site of work including loading, unloading and carriage
874	Substation
875	EARTH WORK
876	Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.
877	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outsidethe building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
878	Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres
879	CENTRING AND SHUTTERING WORK
880	Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)
881	Centering and shuttering for columns (Square or rectangularor poly gonal in plain)
882	Ground Floor
883	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
884	Ground Floor
885	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
886	Ground Floor
887	CONCRETE WORK
888	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
889	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
890	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the sameshall be deducted )
891	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
892	BRICK WORK
893	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
894	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
895	HOISTING AND ROOFING WORK
896	Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mmthick cement concrete 1:8:16
897	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction ofEngineer-in- charge.
898	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
899	Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction ofEngineer- in- charge.
900	Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry cost of neat cement using 2.75kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in- charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement :5 coarse sand) admixed with water proofing ompound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement L5 coarse sand) admixed with water proofing compound conforming to IS :2645 and approved by Engineer.
901	FLOORING AND CLADDING WORK
902	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
903	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
904	Ground Floor
905	PLASTER AND POINTING WORK
906	12.5 mm thick cement plaster 1:5
907	Ground Floor
908	20mm thick cement plaster 1:5 in two coat work
909	Ground Floor
910	PAINTING WORK
911	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
912	Ground Floor
913	Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
914	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
915	WOOD WORK
916	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and othersections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointedmechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
917	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
918	Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.
919	For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
920	STEEL WORK
921	Supplying and fixing rolling shutters, ofapproved make, made of 80mmx1.25mm,M.S. Laths, interlocked together throughtheir entire length and jointed together, atthe end, by end locks, mounted onspecially designed pipe shaft, withbrackets, side guides, 27.5cm long wirespring grade No. 2 and arrangement forinside and outside locking with push andpull operation complete, including topcover 0.80mm thick (payment is to be made for the exact size of opening whererolling shutter is to be fixed)c
922	Extra for providing mechanical device,chain and crank operation, for operatingrolling shutter, exceeding 11.20 sqm inarea, of the rolling shutter
923	Wroughtironandmildsteelladders,framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
924	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
925	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
926	Below Ground Floor
927	Meter Room
928	EARTH WORK
929	Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.
930	CENTRING AND SHUTTERING WORK
931	Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)
932	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
933	Ground Floor
934	CONCRETE WORK
935	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
936	Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
937	Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the sameshall be deducted )
938	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
939	BRICK WORK
940	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
941	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
942	HOISTING AND ROOFING WORK
943	Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mmthick cement concrete 1:8:16
944	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction ofEngineer-in- charge.
945	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
946	Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction ofEngineer- in- charge.
947	Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry cost of neat cement using 2.75kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in- charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement :5 coarse sand) admixed with water proofing ompound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement L5 coarse sand) admixed with water proofing compound conforming to IS :2645 and approved by Engineer.
948	FLOORING AND CLADDING WORK
949	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
950	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
951	PLASTER AND POINTING WORK
952	12.5 mm thick cement plaster 1:5
953	20mm thick cement plaster 1:5 in two coat work
954	PAINTING WORK
955	White washing (Three coat)
956	STEEL WORK
957	Wroughtironandmildsteelladders,framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
958	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
959	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
960	PUBLIC HEALTH
961	PART-I INTERNAL WORKS (A) CSR ITEM
962	Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm diaincluding cost ofseat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
963	Providing and fixing jet spray with 2\"-6\" long PVC pipe.With C.P. Brass nut
964	Providing and fixingin position CP Brass Grab Barof approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
965	Providing and fixingin position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.Size 550 mm x 400 mm x 815 mm
966	Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect.
967	Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge)complete in all respect.
968	Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer-in-charge)complete in all respect.
969	Providing and fixingin position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inletof approved make (to the approval of Engineer-in-charge) complete in all respect.
970	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backingfixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on topcomplete in all respect (as required by the Engineer-in- Charge) Size 550mmx400mm
971	Providing and fixingin position stainless steel sinksof approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm
972	Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
973	Providing and fixingin position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.C.P. brass toilet paper holder
974	Providing and fixingin positiontowel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
975	C.P. brass towel Rails size 15mm dia 610mm long
976	C.P brass towel ring
977	Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.C.P. Brass khunti with 3 pegs
978	Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
979	C.P. brass Bib cock long nose/ long body foam flow without flange
980	C.P. brass Bib cock foam flow without flange
981	Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
982	C.P.brass 15mm Concealed stop cock with flange.
983	C.P.brass 15mm Angle valve without flange
984	Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect.C.P. brass liquid soap container
985	Providing & fixing in position PVC flexible tube connectionof approved make (to the approval of Engineer-in-charge ) complete in all respect.PVC tube connection of size 15 mm x 375 mm with PTMT nut
986	Providing and fixingin position C.P. brass soap dishof approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
987	Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge)consisting of C.P. brass Urinal waste Couplingdome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm longcomplete.
988	Vitreous white Chinaware PartitionSmall partitions size 69x 16.5 x 32.5 cm
989	Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge)with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.
990	25 litre capacity water heater
991	50 litre capacity water heater
992	Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
993	Sub Work-2 Soil Waste, Vent & Fittings
994	Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. manufacture or any other reputed firm including cost of lead yarn,fuel and toolsetc.
995	100mm i/d (1.36 kg.)
996	75mm i/d (1.13 kg.)
997	Providing & Fixing in position M.S or heavy flat iron clamps made out ofM.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
998	Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100mm i/d pipes
999	100mm i/d door Bend
1000	100mm i/d Bend plain
1001	100mm i/d H.C.I. Heal Rest Bend
1002	100mm i/d Door Tee
1003	100mm i/d Plain Tee
1004	100mm i/d Cowls
1005	100mm i/d Collars
1006	100mm i/d P-Trap
1007	Providing ,laying, jointing, fixing and testing ISI MarkedG.I. Pipe (as per IS 1239) B-Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
1008	32mm i/d
1009	50mm i/d
1010	Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge. 100mm i/d
1011	Sub Work-3 Rain Water Pipes and Fittings
1012	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type A
1013	160mm o/d single socket SWR UPVC pipe lines laid complete
1014	110mm o/d single socket SWR UPVC pipe lines laid complete
1015	Providing & Fixing in position M.S or heavy flat iron clamps made out ofM.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
1016	M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
1017	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipesElbow 90 Degree (All side socketed)
1018	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. DSR-2014 12.44
1019	Sub Work-4 Water Supply
1020	INTERNAL -EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
1021	SDR 11 CPVC pipes & fittings 16mm o/d
1022	SDR 11 CPVC pipes & fittings 20mm o/d
1023	SDR 11 CPVC pipes & fittings 25mm o/d
1024	SDR 11 CPVC pipes & fittings 32mm o/d
1025	SDR 11 CPVC pipes & fittings 40mm o/d
1026	SDR 11 CPVC pipes & fittings 50mm o/d
1027	Providing ,laying, jointing, fixing and testing ISI MarkedG.I. Pipe (as per IS 1239) B-Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
1028	15mm i/d
1029	20mm i/d
1030	25mm i/d
1031	32mm i/d
1032	40mm i/d
1033	50mm i/d
1034	Providing and laying, jointing, fixing, testing ISI MarkedG.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
1035	25mm i/d
1036	32mm i/d
1037	40mm i/d
1038	50mm i/d
1039	65mm i/d
1040	Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879in G.I. Pipe lines complete in all respect.
1041	15mm i/d G.I. Union
1042	20mm i/d G.I. Union
1043	25mm i/d G.I. Union
1044	32mm i/d G.I. Union
1045	40mm i/d G.I. Union
1046	50mm i/d G.I. Union
1047	Providing, fixing and jointing ISI MarkedGun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
1048	15mm i/d Gun Metal peet valve heavy pattern.
1049	20mm i/d Gun Metal peet valve heavy pattern.
1050	25mm i/d Gun Metal peet valve heavy pattern.
1051	32mm i/d Gun Metal peet valve heavy pattern.
1052	40mm i/d Gun Metal peet valve heavy pattern.
1053	50mm i/d Gun Metal peet valve heavy pattern.
1054	Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75 mm x 50 mm
1055	Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
1056	Through wall 11.43 cm thick
1057	Through wall 22.86 cm thick
1058	Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
1059	Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
1060	450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
1061	Sub Work-5 Internal Works
1062	INTERNAL WORKS ALL N.S. ITEMSProviding and fixing to the basement ceiling M.S. clamps/supports fabricated form M.S. structural steel consisting of channels, angle iron, M.S. rods, nuts, bolts and washers, fixed to the basement ceiling with expansion fasteners including painting of supports with an enamel paint over a coat of primer complete in all respects.(Sample of structural clamp to be submitted for approval before installation). (Soil, Water & Fire Pipes)
1063	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B160mm o/d SWR UPVC pipe lines laid complete
1064	Providing and laying, jointing, fixing, testing ISI MarkedG.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
1065	65mm i/d
1066	80mm i/d
1067	Constructing brick masonry water tight grease trap (with three chambers , each of 0.4 M X 0.6 M in plan) with 75 class designation bricks in cement mortar 1 : 5 ( 1 cement : 5 fine sand ) earth work, excavation in all kinds of soil, foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including constructing baffle wall, stainless steel angles on corners, stainless steel perforated plates with stainless steel lifting handles in each chamber,inlet and outlet fittings in UPVC, double seal C.I. covers complete as per standard design:
1068	Inside size 2.0m x 1.5m and 1.0m deep including two nos. 60x60 cm. C.I. Cover and frame (double seal weight of cover and frame not less than 75 kg)
1069	PART-I EXTERNAL WORKS (A) CSR ITEM
1070	Sub Work-1 Water Supply
1071	Providing and laying, jointing, fixing, testing ISI MarkedG.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
1072	25mm i/d
1073	32mm i/d
1074	40mm i/d
1075	50mm i/d
1076	65mm i/d
1077	80mm i/d
1078	Providing, fixing and jointing ISI MarkedGun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
1079	25mm i/d Gun Metal peet valve heavy pattern.
1080	32mm i/d Gun Metal peet valve heavy pattern.
1081	40mm i/d Gun Metal peet valve heavy pattern.
1082	50mm i/d Gun Metal peet valve heavy pattern.
1083	65mm i/d Gun Metal peet valve heavy pattern.
1084	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
1085	80 mm i/d
1086	100 mm i/d
1087	150 mm i/d
1088	Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring.
1089	D.I. Pipe as per IS 8329 DI-K7
1090	80mm i/d pipe lines laid complete
1091	100mm i/d pipe lines laid complete
1092	Supplying andlaying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.D.I. specials upto 300mm i/d
1093	Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
1094	Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
1095	600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal
1096	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cuttingin streets or open areaincluding trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.Earth work upto 1.5 m. Depth forAll classes of soil except rocky
1097	Sub Work-2 Sewerage System
1098	Providing, Laying , fixing & jointing ofP.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
1099	110mm o/d pipe of 8 Kgf. / sqcm
1100	160mm o/d pipe of 8 Kgf. / sqcm
1101	200mm o/d pipe of 8 Kgf. / sqcm
1102	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc.as per standard design minimumdepth of water should be 150 mm with a minimum seal 50mm.
1103	100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
1104	Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards,fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works,upto one chain (15m) complete in all respects.Depth not exceeding 3 m. BGLAll kinds of soil except rocky
1105	Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
1106	450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
1107	600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal
1108	Extra for every 0.30 metre depth of inspection chamber.
1109	450mm x 600mm inside
1110	600mm x 900mm inside
1111	Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
1112	Inside size 75x120 cm and 120 cm deep
1113	Inside size 90x150 cm and 120 cm deep
1114	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 upto1.80 m increase in depth.
1115	Inside size 75x120 cm
1116	Inside size 90x150 cm
1117	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 beyond 1.80 m upto 3.60 m beyond addiational depth.Inside size 90x150 cm
1118	Sub Work-3 Storm Water Drainage System
1119	Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards,fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works,upto one chain (15m) complete in all respects.
1120	Depth not exceeding 3 m. BGLAll kinds of soil except rocky
1121	Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting ofreinforced cement concrete spigot and socketedpipes and specials with rubber ringISI marekd as per IS code IS 458-2003into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc.R.C.C. Pipe NP -3
1122	150mm i/d pipe
1123	250mm i/d pipe
1124	300mm i/d pipe
1125	400mm i/d pipe
1126	450mm i/d pipe
1127	Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
1128	Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
1129	600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal
1130	Extra for every 0.30 metre depth of inspection chamber.
1131	450mm x 450mm inside
1132	600mm x 900mm inside
1133	Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick C.C 1:6:12in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.49)complete and to the requirement of the Engineer-In-Charge. Single Road Gully chamberSize 610mm x 457mm x 800mm
1134	Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
1135	Inside size 75x120 cm and 120 cm deep
1136	Inside size 90x150 cm and 120 cm deep
1137	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 upto1.80 m increase in depth.
1138	Inside size 75x120 cm
1139	Inside size 90x150 cm
1140	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 beyond 1.80 m upto 3.60 m beyond addiational depth.Inside size 90x150 cm
1141	Sub Work-4 Pumping System
1142	PUMPING SYSTEMProviding, fixing, testing and commissioning of Vertical in line type pump set with SS casing, SS impeller and SS shaft suitable for operation on 400/440 volts, 3 phase 2900 RPM, TEFC electric motor mounted on a common channel base plate with coupling guard, 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster complete as required.( Including control panel board cosisting ofvoltmete,r amps MCB etc. and earthing as per speicification complete in all respects.) a) Irrigation water supply pumpsPump capacity - 400 lpmHead- 40 mRPM - 2900
1143	Providing, fixing and commissioning non clog type mono block submersible drainage pumps suitable for handling solids of 12 mm size with totally water and dust proof motor as specified.( Including control panel board cosisting ofvoltmete,r amps MCB etc. and earthing as per speicification complete in all respects.)
1144	Capacity 500 lpm & Head 15 m (in basement)(9 nos. working + 1 no. spare)
1145	Capacity 300 lpm & Head 15 m (in pumproom)
1146	Providing, fixing and commissioning non clog type mono block submersible sewage pumps suitable for handling solids of 32 mm size with totally water and dust proof motor as specified .
1147	Capacity 100 lpm & Head 15 m (in basement)(2 nos. working + 1 no. spare)
1148	Supplying and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor on prelaid cabel trays including supplying and making and termination with brass compression glands: (cabel trays shall be installed by electrical cotrator).
1149	3 Core x 4 sq.mm
1150	3 Core x 6 sq.mm
1151	Supply, assembly, erection, testing and commissioning ofdiaphragn type dosing chlorinator with metering pump mounted on 500 litres capacity HDPE tank and suitable for operation on 220 ± 5% single phase, 50 Hz AC supply, competein all respects. a)Suitable for flow rate 18000 lph
1152	Sub Work-5 SUCTION AND DELIVERY PIPES AND VALVES FOR WATER SUPPLY PUMPS
1153	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1154	50mm internal diameter
1155	80mm internal diameter
1156	100mm internal diameter
1157	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
1158	50 mm i/d
1159	80 mm i/d
1160	100 mm i/d
1161	Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines includingjointing & cost of Nut Bolt , rubber insertion etc.complete.
1162	50 mm nominal bore
1163	80mm i/d check valve .
1164	100mm i/d check valve
1165	Sub Work-6 Tubewell & Tubewell Pumps (1 Nos)
1166	Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.
1167	200mm nominal diameter (weight 41.6 kg per metre) 8.0 mmthickness
1168	Supplying at siteofgravel of 1/16\" to 1/8\" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe)
1169	Supplying, commissioning and testing of submersible pumping set suitable for bore 200 mm dia, discharge 300 LPM including cost of supplying and lowering double flanged G.I. \"B\"class column pipe of suitable size (upto 170 metre length)The rate shall also including cost of submerssible 4 sqmm cooper cable 3 core of approved make from ground with submersible pumpingset complete in all respect .(NOTE:- This rate is only for estimate / BOQ Purpose. Payment will be made as per rate approved by Engineer in Charge as per actual strata chart approved)
1170	1 No. of pump set head 200 Mtr , Discharge 300 LPM. (1 no. working & 1 no. stand by)
1171	Supplying and fixing mild steel centering guides made out of 32mm x 6mm thick M.S. bar complete in all respects.
1172	Supplying and fixing mild steel centering guides made out of 32mm x 6mm thick M.S. bar complete in all respects.
1173	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cuttingin streets or open areaincluding trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.Earth work upto 1.5 m. Depth forAll classes of soil except rocky
1174	Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879in G.I. Pipe lines complete in all respect.80mm i/d G.I. Union
1175	Providing, fixing and jointing ISI MarkedGun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.80mm i/d Gun Metal peet valve heavy pattern.
1176	GALVANIZED IRON PIPES AND G.I. EARTHING:Earthing of Sheet metal/ iron clad Switches and metallic cases etc ., with No. 7/12 S.W.G. (7/2.18mm dia.) G.I. wire in20mmdiaG.I.pipepartlyrecessedandpartlyon surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 20mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling).
1177	Supplying and laying C.I. specials as per IS:1538 complete as desired by Engineer-in-Charge conforming to ISI specifications.Note: If C.I specials of ISI Marked is used intead of specials confirming to ISI Specifications , than 10% extra on ratesof this item will be paid.C.I. specials upto 300mm i/d
1178	Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.C.I Single air valve screwed (Size 25mm)
1179	Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004in pipe lines includingjointing & cost of Nut Bolt , rubber insertion etc.complete.Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5%will be paid extra.Class PN-1.0 as per ISI with rubber Flap80mm i/d Non-return valve
1180	Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working partsSluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet,all carriage complete (with the approval of Engineer in-charge).Class PN-1 as per ISI80mm i/d Sluice Valves flanged
1181	Providing and laying, jointing, fixing, testing ISI MarkedG.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.40mm i/d
1182	Providing, fixing and jointing ISI MarkedGun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.40mm i/d Gun Metal peet valve heavy pattern.
1183	Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standarddesign & drawings of public health department.Size 0.9 m. x 0.9 m.
1184	Sub Work-7 Sewerage Treatment Plant
1185	SEWAGE TREATMENT PLANT 120 KLDDesign Supply, erection, testing and commissioning of sewage treatment plant based on attached Growth system working on the principle of Fluidized Aerobic Bio-reactor process based on the FAB processPH : 7.0 - 8.0S. Solids : 250 mg/lCOD : 450 mg/lOil & Grease: 15 mg/lColiform: 10^6- 10^7 counts / 100 mlEffluent discharge standard after treatment:Conforming to requirement approved standardsPH : 7.0 - 8.0BOD 5: Less than 6 mg/lS. solids : Less than 30mg/lCOD : Less than 150 mg/lOil & Grease: Less than 10 mg/lOutlet Coliform : < 1000 counts / 100 ml
1186	Sewage treatment plant shall include supply erection, testing & commissioning of the following items: Ssuch as bar screen, sewage lifting pumps of designed capacity and speicification, submersible drainage pumps, air blowers including air grids, media for tube settler as per designed requirement, treated water pumps, filter press and filter press feed screw pumps, pipe lines and valves, waste water treatement of appropriet technology and any other item required as per design complete in all respect to be satisfection of engineer-in-charge. The cost also include O &M of STP for a period of one year after commissioning. All spares and replacement of any defective part shall be included in the controct.
1187	Sub Work-9.1 Recharging Well with Bore Hole
1188	Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopesto full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.Depth upto 1.5 m B.G.LAll classes of soil except rocky
1189	Earth fillingEarth work (exclusive of compensation for earth) in excavation in ordinary soil or soil containing gravel or kankar upto 40% and filling in 15 cm layers in foundation and plinth including ramming watering and consolidating under floors with earth brought from a distance not exceeding 30 metres
1190	Sub Work-9.2 Concrete Work
1191	Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
1192	Cement concrete 1:3:6 with stone ballast or shingle 40 mm guage. using concrete mixing volumetric type
1193	Reinforced cement concrete M-25mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
1194	Sub Work 9.3 Centering and Shuttering
1195	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
1196	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
1197	Sub Work-9.4 Brick Work
1198	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
1199	Sub Work 9.5 Plaster Work
1200	12.5mm thick cement plaster 1:5.
1201	Sub Work 9.6 Steel Work
1202	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
1203	Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).RCC Man hole cover with Frame560mm i/d RCC man hole cover with frame as per ISIHeavy duty
1204	Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
1205	Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting ofreinforced cement concrete spigot and socketedpipes and specials with rubber ringISI marekd as per IS code IS 458-2003into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc.R.C.C. Pipe NP -3200mm i/d pipe
1206	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer – in-charge, upto 90 metre depth below ground level.All types of soil.400 mm dia.
1207	Providing, laying in trenches to correct gradient and alignment and jointing ofUPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.160mm o/d pipe
1208	Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:-Third Layer :----- Bajri screened, cleaned and washed and graded from6mm to 20mm (from Pathankot or approved equivalent quarry).
1209	Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:-Second Layer :----- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry).
1210	Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:-Top Layer:Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.
1211	Supplying at siteofgravel of 1/16\" to 1/8\" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe)
1212	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer -in-charge.
1213	Supplying & Fixing of bail plug of M.S pipe complete with inverted U-hook attched to the bottom plug complete in all respect.200mm internal diameter (weight 41.6 kg per metre) 8.0 mmthickness
1214	Sub Work 9.9 Water Features with 5 Nos Cascade Jet
1215	Water Features with 5 nos cascade JetSkimmer Type Area : 140 m2 x 0.3 m depthTotal Pool Volume: 42 m3Filteration Flow rate: 14.0m3/hr Filtration Plant with PumpBobbin Wound PolysterFibre Glass , Filtration Velocity : 30 m3/hr/m2 Dia. 750 mm working pressure 2.5 kg/cm2 Flow rate: 14 m3/hr outletconnection 63 mm , complete with pressure gauge,manual bleeder,water drain,empty drain for filter media with 500mm bed depth with media ( 450 Kgs)
1216	Make : AtecPool 6 Way side mountedMultiport valve with all acessoriesconnection size 63 mm
1217	Make : AtecPoolSelf Priming Pump ABS plastic impeller of polyperelene flow rate 14.0 m3/hr @10 mtrs head with inbuiltprefilter strainer 1.0 hp ,2850 rpm,230volts (1W+1S)
1218	Chemical Dosing systems
1219	Inline chlorine dispenser for chlorine
1220	Make : AtecPool
1221	Pool Basin Fittings
1222	ABS Square drain 300 mm x 300 mm in White plastic
1223	Make : AtecPool
1224	Floor inletsin ABS white plastic flow rate 2 m3/hr with 50 mm glue connection
1225	Make : AtecPool
1226	Suction Nozzle in ABS white plastic for suction sweeper with 2\" connection
1227	Make : AtecPool
1228	ABS white plastic skimmer with inbuilt basket , 2\" connection
1229	Make : AtecPool-CMP
1230	Cascade Jet
1231	Made of Cast BronzeProduce a graceful conical shaped Flow rate 3.0 m3/hr at 8 m head , Orifice : 50 mm , Spray height : 500 mm connection size : 1\" , water level dependent areated display
1232	Make :PF-3450
1233	Chrome Body & spot mirror with polycarbon luminaire cover 8.0 W ( warm white ) 12 to 24 V DC Ø96 mm & depth 90 mm
1234	Make : Fiberli
1235	Driver for Underwater light 60 W ,12-24VDC, IP 67
1236	Make : Meanwell
1237	Deck Box ABS for Underwater light
1238	Make : AtecPool
1239	Fountain Self Priming Pump ABS plastic impeller of polyperelene flow rate 15.0 m3/hr @8 mtrs head with inbuiltprefilter strainer 1.5 hp ,2850 rpm,230volts (1W+1S)
1240	Make: AtecPool
1241	Maintenance Kit
1242	suction sweeper 450 mm with 1-1/2\" connection size
1243	Reinforced telescopic Handle 1.2-2.4 mtrs long
1244	Make : AtecPool
1245	Deep Bag skimmer clip type
1246	Make : AtecPool
1247	Water surface skimmer clip type
1248	Make : AtecPool
1249	Curved brush clip type
1250	Make : AtecPool
1251	Test kit for pH and chlorine
1252	Make : AtecPool
1253	Sub Head 6 :- Plant Room within 20 mtr from water Feature
1254	uPVC Piping with complete fittings of 10 bar for water feature & Plant Room (3.5 mx 3.5 mx1.8m) min.750 mm lower than drain
1255	Ø 50 mm drain pipe
1256	Ø 50 mm Inlet pipe to floor inlet
1257	Ø 63 mm pump for skimmer
1258	Ø 50 mm from vacume pipe to pump header
1259	Ø 32 mm
1260	Ø 63 mm inlet pipe to fountain
1261	Ø 75 mm suction pipe to fountain pump
1262	UPVC paddle flange
1263	Ø 25 mm
1264	Ø 50 mm
1265	Ø 63 mm
1266	Ø 75 mm
1267	Ø 90 mm with end plug + pipe 25 mm for U/W Light
1268	UPVC Ball Valve solvent
1269	Ball Valve Solvent type Ø 50 mm
1270	Ball Valve Solvent type Ø 63 mm
1271	Ball Valve Solvent type Ø 75 mm
1272	Check valveØ 50 mm solvent type
1273	Check valveØ 63 mm solvent type
1274	Common Electrical Panel forrecirculation pumps( 02 nos.) , foutain pumps (02 nos.) `RCCB for underwater lights ,Panel 16 gauge powder coated, VAF, Indicator Lamp , MCB for pumps
1275	3 core 2.5 mm2 PVC copper cable for pumps with PVC 20 mm conduit in mtrs
1276	2 Core Copper cable with rigid conduit for Underwater light (2.5 mm2)
1277	Intial chemical charge for 7 days of working ( HCL/TCCA/ALUM/ALEGACIDE)
1278	Pipe support
1279	SWG 8 GI wire for pumps/panel
1280	Sub Work 7 Water Cascade-1
1281	Water Cascade - 1Skimmer Type Area : 164 m2 x 0.5 m depthTotal Pool Volume: 82 m3Filteration Flow rate: 28.0 m3/hr
1282	Filtration Plant with Pump
1283	Bobbin Wound PolysterFibre Glass , Filtration Velocity : 30 m3/hr/m2 Dia. 750 mm working pressure 2.5 kg/cm2 Flow rate: 14 m3/hr outletconnection 63 mm , complete with pressure gauge,manual bleeder,water drain,empty drain for filter media with 500mm bed depth with media ( 450 kgs)
1284	Make : AtecPool
1285	6 Way side mountedMultiport valve with all acessoriesconnection size 63 mm
1286	Make : AtecPool
1287	Self Priming Pump ABS plastic impeller of polyperelene flow rate 14.0 m3/hr @10 mtrs head with inbuiltprefilter strainer 1.0 hp ,2850 rpm,230volts (2W+1S)
1288	Make: AtecPool
1289	Chemical Dosing systems
1290	Dosing pump 0-5 LPH at 5 bar with 100 ltrs tank for pH & chlorine
1291	Make : AtecPool-Aqua
1292	Pool Basin Fittings
1293	ABS Square drain 300 mm x 300 mm in White plastic
1294	Make : AtecPool
1295	Floor inletsin ABS white plastic flow rate 2 m3/hr with 50 mm glue connection
1296	Make : AtecPool
1297	Suction Nozzle in ABS white plastic for suction sweeper with 2\" connection
1298	Make : AtecPool
1299	ABS white plastic skimmer with inbuilt basket , 2\" connection
1300	Make : AtecPool-CMP
1301	Water Wall 100 mtrs
1302	Perporated pipe in UPVC 110 mm with perforation
1303	Chrome Body & spot mirror with polycarbon luminaire cover 8.0 W ( warm white ) 12 to 24 V DC Ø96 mm & depth 90 mm
1304	Make : Fiberli
1305	Driver for Underwater light 60 W ,12-24VDC, IP 67
1306	Make : Meanwell
1307	Deck Box ABS for Underwater light
1308	Make : AtecPool
1309	Fountain Self Priming Pump ABS plastic impeller of polyperelene flow rate 60.0 m3/hr @ 10 mtrs head with inbuiltprefilter strainer 5.5 hp ,2850 rpm, 400volts (3W+1S)
1310	Make: AtecPool
1311	Sub Work 8Plant Room Within 20 mtrs from Water Features
1312	Plant Room within 5 mtrs from Water Feature
1313	uPVC Piping with complete fittings of 10 bar for water feature & Plant Room (5 mx5 mx1.8m) min.750 mm lower than drain
1314	Ø 50 mm drain pipe
1315	Ø 75 mm Inlet pipe to floor inlet
1316	Ø 90 mm pump for skimmer
1317	Ø 50 mm from vacume pipe to pump header
1318	Ø 110 mm inlet pipe to water wall
1319	Ø 160 mm suction pipe for water wall
1320	UPVC paddle flange
1321	Ø 25 mm
1322	Ø 50 mm
1323	Ø 75 mm
1324	Ø 90 mm
1325	Ø 110 mm
1326	Ø 160 mm
1327	Ø 90 mm with end plug + pipe 25 mm for U/W Light
1328	UPVC Ball Valve solvent
1329	Ball Valve Solvent type Ø 50 mm
1330	Ball Valve Solvent type Ø 63 mm
1331	Ball Valve Solvent type Ø 75 mm
1332	Butterfly valve with Valve kitØ 90 mm
1333	Butterfly valve with Valve kitØ 110 mm
1334	Butterfly valve with Valve kitØ 110 mm
1335	Check valveØ 50 mm solvent type
1336	Check valveØ 75 mm solvent type
1337	wafertype Check valveØ 110 mm with valve kit
1338	Common Electrical Panel forrecirculation pumps( 03 nos.) , foutain pumps (03 nos.) `RCCB for underwater lights ,Panel 16 gauge powder coated, VAF, Indicator Lamp , MCB for pumps, with phase preventer
1339	3 core 2.5 mm2 PVC copper cable for pumps with PVC 20 mm conduit in mtrs
1340	3 core 4.05 mm2 PVC copper cable for pumps with PVC 20 mm conduit in mtrs
1341	2 Core Copper cable with rigid conduit for Underwater light (2.5 mm2)
1342	Intial chemical charge for 7 days of working ( HCL/TCCA/ALUM/ALEGACIDE)
1343	Pipe support
1344	SWG 8 GI wire for pumps/panel
1345	Sub Work-9 Water Cascade
1346	Water Cascade - 2Skimmer Type Area : 164 m2 x 0.5 m depthTotal Pool Volume: 82 m3Filteration Flow rate: 28.0 m3/hr
1347	Filtration Plant with Pump
1348	Bobbin Wound PolysterFibre Glass , Filtration Velocity : 30 m3/hr/m2 Dia. 750 mm working pressure 2.5 kg/cm2 Flow rate: 14 m3/hr outletconnection 63 mm , complete with pressure gauge,manual bleeder,water drain,empty drain for filter media with 500mm bed depth with media ( 450 kgs)
1349	Make : AtecPool
1350	6 Way side mountedMultiport valve with all acessoriesconnection size 63 mm
1351	Make : AtecPool
1352	Self Priming Pump ABS plastic impeller of polyperelene flow rate 14.0 m3/hr @10 mtrs head with inbuiltprefilter strainer 1.0 hp ,2850 rpm,230volts (2W+1S)
1353	Dosing pump 0-5 LPH at 5 bar with 100 ltrs tank for pH & chlorine
1354	ABS Square drain 300 mm x 300 mm in White plastic
1355	Floor inletsin ABS white plastic flow rate 2 m3/hr with 50 mm glue connection
1356	Suction Nozzle in ABS white plastic for suction sweeper with 2\" connection
1357	ABS white plastic skimmer with inbuilt basket , 2\" connection
1358	Perporated pipe in UPVC 110 mm with perforation
1359	Chrome Body & spot mirror with polycarbon luminaire cover 8.0 W ( warm white ) 12 to 24 V DC Ø96 mm & depth 90 mm
1360	Driver for Underwater light 60 W ,12-24VDC, IP 67
1361	Deck Box ABS for Underwater light
1362	Fountain Self Priming Pump ABS plastic impeller of polyperelene flow rate 60.0 m3/hr @ 10 mtrs head with inbuiltprefilter strainer 5.5 hp ,2850 rpm, 400volts (3W+1S)
1363	Sub Work 6:-Plant Room within 5 mtrs from Water Feature
1364	Plant Room within 5 mtrs from Water Feature
1365	uPVC Piping with complete fittings of 10 bar for water feature & Plant Room (5 mx5 mx1.8m) min.750 mm lower than drain
1366	Ø 50 mm drain pipe
1367	Ø 75 mm Inlet pipe to floor inlet
1368	Ø 90 mm pump for skimmer
1369	Ø 50 mm from vacume pipe to pump header
1370	Ø 110 mm inlet pipe to water wall
1371	Ø 160 mm suction pipe for water wall
1372	UPVC paddle flange
1373	Ø 25 mm
1374	Ø 50 mm
1375	Ø 75 mm
1376	Ø 90 mm
1377	Ø 110 mm
1378	Ø 160 mm
1379	Ø 90 mm with end plug + pipe 25 mm for U/W Light
1380	UPVC Ball Valve solvent
1381	Ball Valve Solvent type Ø 50 mm
1382	Ball Valve Solvent type Ø 63 mm
1383	Ball Valve Solvent type Ø 75 mm
1384	Butterfly valve with Valve kitØ 90 mm
1385	Butterfly valve with Valve kitØ 110 mm
1386	Butterfly valve with Valve kitØ 110 mm
1387	Check valveØ 50 mm solvent type
1388	Check valveØ 75 mm solvent type
1389	wafertype Check valveØ 110 mm with valve kit
1390	Common Electrical Panel forrecirculation pumps( 03 nos.) , foutain pumps (03 nos.) `RCCB for underwater lights ,Panel 16 gauge powder coated, VAF, Indicator Lamp , MCB for pumps, with phase preventer
1391	3 core 2.5 mm2 PVC copper cable for pumps with PVC 20 mm conduit in mtrs
1392	3 core 4.05 mm2 PVC copper cable for pumps with PVC 20 mm conduit in mtrs
1393	2 Core Copper cable with rigid conduit for Underwater light (2.5 mm2)
1394	Intial chemical charge for 7 days of working ( HCL/TCCA/ALUM/ALEGACIDE)
1395	Pipe support
1396	SWG 8 GI wire for pumps/panel
1397	PART - III FIRE FIGHTING PUMPS & EQUIPMENT
1398	Supply, installation, testing & commissioning of electric driven Hydrant Pump & Sprinkler pumpsuitable for automatic operation consisting of the following: Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump. NSCommon bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required.NSThe pump shall be of the following specifications:Discharge- 2850 lpmHead - 70 mNo. of stage preferred - Single / DoubleSpeed RPM - 2900Material of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease Lubicatede) Seal & Make- MechanicalType of pump - End suction
1399	Supply, installation, testing & commissioning of electric driven water curtain pumpsuitable for automatic operation consisting of the following: Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pumpSquirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications:Discharge- 2850 lpmHead - 40 mNo. of stage preferred - Single / DoubleSpeed RPM - 2900Material of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease Lubicatede) Seal & Make- MechanicalType of pump - End suction
1400	Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for automatic operation consisting of the following:Horizontally mounted centrifugal end suction pump complete with mechanical seal and including necessary arrangement for testing of pump.Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications:Discharge- 300 lpmHead - 70 mNo. of stage preferred - MultistageSpeed RPM - 2900Mover- Electric Motor DrivenMaterial of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease Lubicatede) Seal & Make- MechanicalType of pump - End suction
1401	Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for automatic operation consisting of the following:Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pumpWater coolled Diesel Engine developing suitable BHP at 1500-2000 RPM for the Pump,common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 400 lts with first charge and manual oil pump set. Flexible coupling and coupling guard with the Pump,Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. Engine panel Sealed maintenance free batteries of 24 V, 88 AHExhaust pipe of required length with asbestos lagging, muffler
1402	Day oil tank of 400 lts with first charge and manual oil pump set.The pump shall be of the following specifications:Discharge- 2850 lpmHead - 70 mNo. of stage preferred - Single / DoubleSpeed RPM - 1850Mover- Diesel engine drivenMaterial of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease Lubicatede) Seal & Make- MechanicalType of pump - End Suction
1403	Supply, installation, testing & commissioning of diesel engine water curtain Pump suitable for automatic operation consisting of the following:Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pumpWater coolled Diesel Engine developing suitable BHP at 1500-2000 RPM for the Pump,common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 400 lts with first charge and manual oil pump set.Flexible coupling and coupling guard with the Pump,Common bed plate of fabricated mild steel channel or cast iron type.
1404	Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. Engine panel Sealed maintenance free batteries of 24 V, 88 AHExhaust pipe of required length with asbestos lagging, mufflerDay oil tank of 400 lts with first charge and manual oil pump set.The pump shall be of the following specifications:Discharge- 2850 lpmHead - 40 mNo. of stage preferred - Single / DoubleSpeed RPM - 1850Mover- Diesel engine drivenMaterial of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease Lubicatede) Seal & Make- MechanicalType of pump - End Suction
1405	Design,supply,installation,testing andcommissioningofnon draw out Cubical typesectionalised floor standing powder coated switch board of 31 MVA fault capacity at 415 V +/- 10% complete with 4 strip, 600 A capacity Aluminium Bus - Bar Electrolytic grade, cable alley & supplying & fixing of following switchgears including connections & interconnections complete as required for 1 No Hydrant Pump, 1 No sprinker pump, 1 No Water Curtain Pump, 2 Nos. Jockey Pump, 1 No Engine Starting Panel for Diesel Pump & 1 No Engine Starting Panel for Water Curtain Diesel Pump Details of requirements given in specs.CUBICAL FIRE PANEL BOARDi) For 1 x 55 KW Fire hydrant Pump ( or motor rating as per pump design)ii) For 1 x 55 KW Sprinkler Pump (motor rating as per pump design)iii) For 1 x 30 KW Water Curtain Pump (motor rating as per pump design)iv) For 2 x 15 KW Jockey Pumps ( Motor rating as per pump manufacturer design)
1406	INCOMER1 no. 500A TPN MCCBwith Thermal Magnetic Release & ROH, with 96 mm (0 -500 A) ammeter with 3 CT and selector switch, 96 mm (0 - 300 V) Voltmeter with selector switch, phase indication light withprotectionfuse-01 Set.
1407	OUTGOINGSi) For 2 x 55 KW Wet Riser, Sprinkler Pump.200 A TP MCCB with DOL starter, overload relay start / stop push buttons, 96 mm (0-200 A) ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer. - 02 Setsii) For 1 x 30 KW water curtain pump.100 A TP MCCB with DOL starter, overload relay start / stop push buttons, 96 mm (0-100 A) ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer. - 01 Setii) For 2 x 15 KW Jockey Pump63A TP MCB, 25 A DOL starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT & selector switch, on/off/trip indication lights with protection fuse, single phase preventer. - 02 Setsiii) 32 A MCB for battery charging alongwith engines start relay 24V DC with AMF Panel- 02 setsiv) Provision for starting the diesel engine fire pump with battery charger for trickle & boost charging. The diesel engine driven fire pump shall start automatically in the event of pressure drop beyong preset limit on mains faulure or failure of electrical driven pumps to start.
1408	Note:- CABEL CONNECTIONSeparate neutral link to be provided wherever TP MCCB are used.Following provisions to be made in the fire panel:Audio visual alarm & indications having disconnect / reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset P Bs. The indication shall come on when electrical driven pump set fails to start on pressure drop or when there is power failure during pressure drop.Facility for mode selection ie auto or manual test & local/remote.Protection failure & control cabling.Panel shall be interlocked in such a way when fire pump startson pressure drop in the header, supply to working chiller A/c panel is disconnected.Remote indication of ON/OFF/TRIP shall be provided through potential free contact.Provision of remote starting/stopping (manuals) of the engine shall be made.
1409	NOTE:All pumps operation shallbe controled by flow switches.The logic of control panel based on specification attached.All pumps shall be works automatically or manually.
1410	(panel starter shall be based onpumps motor rating if any changes in motor rating the starter rating shall change and fabrication shall start only after approval of drawing)
1411	Supplying & fixing air vessel made out of 450mm,Dia, 8 mm thick MS sheet ,2000mm hight with air release valves on top and flanged connection to risers, drain arrangements with 50mm dia gunmental wheel valves,with required accessories,pressure gaguge and painting with synthetic enamel paint of approved shade as required.
1412	Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor including supplying and making end termination with brass compression glandsitem No.
1413	3 core x 70 sq.mm
1414	3 core x 25 sq.mm
1415	4 core x 2.5 sq mm
1416	Providing and fixing pressure switches of approved make in MS pipe line suitable for line pressure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect.
1417	Providing and fixing fire retardent / extinguishing electrical insulated synthetic mat of 3mm thick ±10% conforming to latest BIS doc no.-ET-02(5440) meeting requirements of IS 3043 / IS 5216 (Part I, II & III), IS 8437 & IEC 479 suitable for all voltages not exceeding 3.3 KV AC supply and having minimum width of 1000mm ± 20mm and including supply of required quantity of adhsive / compound and fixing the same at site as per site requirement.
1418	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
1419	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
1420	Earthing with GI Earth plate 600 mm x 600 mm x 6 mm th. including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) complete as required. ELECT.
1421	Providing & fixing 25 mm x 5 mm G.I. Strip in on surface or in recess for connections etc as required. ELECT.
1422	Providing & fixing 25 mm x 5 mm G.I. Strip in 40 mm dia GI pipe from earth electrode as required. ELECT.
1423	Providing and fixing ofS.S Pressure Gauge comlete as required complete in all respect. Dial diameter 100mm callbration 0-16 KG
1424	Sub Work -8 Suction and Delivery pipes and Valves for Fire fighting pumps
1425	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1426	50mm internal diameter
1427	80mm internal diameter
1428	100mm internal diameter
1429	150mm internal diameter
1430	200mm internal diameter
1431	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
1432	80 mm i/d
1433	100 mm i/d
1434	150 mm i/d
1435	Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines includingjointing & cost of Nut Bolt , rubber insertion etc.complete.
1436	80mm i/d check valve .
1437	150mm i/d check valve
1438	200mm i/d check valve
1439	Supplying, Installation, Testing and Commissioning ofcast iron flanged Y type strainer with stainless steelmesh in PN-1.0 including cost of Nut Bolt , rubber insertion complete in all respects.
1440	200mm i/d
1441	Sub Work 9 Fire Hydrant System
1442	FIRE HYDRANT SYSTEM
1443	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
1444	100 mm internal diameter
1445	150 mm internal diameter
1446	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. on surfaceandproviding angle iron support or cement concrete block as support including painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1447	100mm internal diameter
1448	150mm internal diameter
1449	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1450	80mm internal diameter
1451	Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.
1452	Supplying, Installation, Testing and Commissioning63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzleconfirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
1453	Providing and fixingfire brigade inlet connection of cast iron body with Gun metal63mm dia instantaneous type male coupling withbuilt in check valves and 150mm dia flanged outlet complete with bolts,nuts and rubber insertionsas per IS:904. (tobe connected to static tank).
1454	Four Way inlet connection
1455	Two Way inlet connection
1456	Supplying, Installation, Testing and Commissioning ofRRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
1457	Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884,20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.
1458	Supplying, Installation, Testing and Commissioningstandard Fire Man\"s axe with heavy insulated rubber conforming to IS 936 complete in all respect.
1459	Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.
1460	900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)
1461	1200 mm wide x 900 mm high x 400 mm deep Size
1462	Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required
1463	Providing and fixing S.S Pressure Gaugecomplete as required complete in all respect.
1464	Dial diameter 100mm calibration 0-16 Kg
1465	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
1466	80 mm i/d
1467	100 mm i/d
1468	150 mm i/d
1469	Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines includingjointing & cost of Nut Bolt , rubber insertion etc.Complete
1470	100 mm i/d check valve
1471	150 mm i/d check valve
1472	Providing ,laying, jointing, fixing and testing ISI MarkedG.I. Pipe (as per IS 1239) B-Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete
1473	40mm i/d
1474	Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
1475	40mm i/d Brass Ball Valves
1476	Providing and fixing 6 mm thick stainless steel Orifice flange 80 mm dia x 50 mm minimum bore as per requirements to restric the pressure to 3.5 kg per sq cm at the point of branching off from Riser on lower floors.
1477	Providing and fixing suction coupling for fire brigade drawl of water from tank with 100 mm dia GI (Medium) pipe and foot valve (Pipe max 8 M long)
1478	Sub Head-10 Sprinker System
1479	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
1480	100mm internal diameter
1481	150mm internal diameter
1482	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1483	25mm internal diameter
1484	32mm internal diameter
1485	40mm internal diameter
1486	50mm internal diameter
1487	65mm internal diameter
1488	80mm internal diameter
1489	100mm internal diameter
1490	150mm internal diameter
1491	Supplying and Installation control valveC/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. Make Newagecomplete in all respect.
1492	150mm control valve
1493	Providing and fixing S.S Pressure Gaugecomplete as required complete in all respect.
1494	Dial diameter 100mm calibration 0-16 Kg
1495	Supplying an Fixing Pendant / Upright type sprinkler with quartzoid bulb, operating temperature 68 / 79 degree centigrade of 15 mm dia orifice sprinler head to approved by UL/SN
1496	Supplying an Fixing Pendant / Upright type sprinkler with quartzoid bulb, operating temperature 68 / 79 degree centigrade of 15 mm dia orifice sprinler head to approved by UL/SN
1497	Supplying and Fixing Sidewall Sprinkler rated at 68 / 79degree centigrade, quartzoid bulb type, 15 mm dia orificesprinler head to approved by UL/SN complete in all respect.
1498	Providing and fixing Vane type Water flow switch in MS Pipe line for a service pressure up to 450PSI , Minimum flow rate for alarm 10GPM (38 LPM ), Minimum surge 18 FPS (5.5 m/s ) including connection with panel complete in all respect
1499	For 50mm to 150mm pipe line
1500	For 200mm pipe line
1501	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
1502	80 mm i/d
1503	100 mm i/d
1504	150 mm i/d
1505	Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines includingjointing & cost of Nut Bolt , rubber insertion etc.complete.
1506	100 mm i/d check valve
1507	150 mm i/d check valve
1508	Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
1509	50mm i/d Brass Ball Valves
1510	Providing, fixing, testing and commissioning of main control fire alarm panel suitable for 16 zones sprinkler system complete with indivisual indication for each zone with LED, Piezo Sounder and Acknowledge facility.
1511	Providing and laying 2 x 2.5 sq mm copper conductor PVC sheathed armoured cable for connecting fire alarm Panel to flow switch.
1512	Sub Work-11 Water Curtain System
1513	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
1514	100 mm i/d
1515	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. on surfaceandproviding angle iron support or cement concrete block as support including painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1516	100 mm internal diameter
1517	150 mm internal diameter
1518	Providing, laying, fixing, testing and commissioning of \"C\" Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
1519	50mm internal diameter
1520	65mm internal diameter
1521	80mm internal diameter
1522	Providing and fixing S.S Pressure Gaugecomplete as required complete in all respect.
1523	Dial diameter 100mm calibration 0-16 Kg
1524	Providing, fixing, testing & commissioning of brass water Curtain Nozzles TAC/LPC approved K-30 having 15mm BSP threads.
1525	Motorized butterfly valves complete with actuator for water control application (ON/OFF) valves complete with suitable matching flanges, nuts, bolts & washers. Motor, cable connectores etc.
1526	100 mm Dia
1527	HAND APPLIANCES
1528	Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure)as per IS: 15683complete with all accessories as per Manufactures Specification. ISI Markcomplete in all respect.
1529	6 Kg.Capacity
1530	Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Markcomplete in all respect.
1531	4.5 Kg. Capacity
1532	Providing and fixing of FIRE EXTINGUISHER, Mechanical Foam Type 9 ltrIS: 15683 Stored Pressure type complete with all accessories as per Manufactures Specification. ISI Mark of approved makecomplete in all respect.
1533	Providing and fixing Mechanicalfoam type (ISI marked) fire extinguishers consisting of weldedM.S. cylindricalbody squeeze lever dischargevalve 30 cm longhigh pressure dischargehose, discharge nozzle suspension bracketISI markedas per IS 933 finished externallywithredenamel paint and fixed to wall withbrackets complete with internal charger. (In Pump Room)
1534	50 litres capacity (trolly mounted)
1535	Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked asper IS:2878 finished externallywith red enamel paint and fixed to wall with brackets complete with internal charge. (In Pump Room)
1536	Capacity 22.5 kg. IS 2878
1537	Sub Work-12 Basement Ventilation Panel Zone-1
1538	Axial Flow Fan
1539	Supply, installation, testing and commissioning of axial flow tube/vane type fresh/exhaust fan complete fan made out of M.S. / G.I. casing having cast aluminium alloy impeller with high efficiency Aero-foil section blade directly driven,with fan with motor, drive set, mounting frame, mounting accessories canvass connection, spring isolator, gravity damper of G.I. at fan outlet.All the fans are synthetic enamelled painted and complete with birdscreen at inlet as well as outlet. The electric motor coupler shall be squirrel cage induction motor confirming to IS - 325-IP-55 with class \"H\" insulation, motor shall be fire rated upto 250 degrees centigrade for 21/2 hour rating. Fan should be as per specification and drawings.Motor shall be suitable for 415V/50Hz/3 Phase power supply.( Fan to be suspended from ceiling/installed on wall required M.S. supports etc. and mounting accessories should be taken ).
1540	36,000 cfm, 40 mmwg static pressure
1541	34,500 cfm 40 mmwg static pressure
1542	Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required..
1543	G.I. Sheet Metal Ducting (Rectangular)
1544	0.63 mm (24 Ga)
1545	0.80 mm (22 Ga)
1546	1.00 mm (20 Ga)
1547	1.25 mm (18 Ga)
1548	Grilles/Diffusers Supply, installation, testing and commissioning of Aluminium extruted powder coated supplyand returnairgrilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).
1549	Supplying & fixing of powder coated extruded aluminium Supply / Exhaust Air Grills with aluminium volume control dampers as per specifications.
1550	Fresh air GrillesSupply and installation of Fresh air grille of 18 Ga G.I. withlouvers, bird Screen and damper as per specifications and drawings.
1551	Volume Control DamperSupply, installation, testing & commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
1552	Electric Panel BoardBasement Ventilation PanelSupply, installation,testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of2.0mmthick steel sheet duly painted complete withvoltmeter, ammeter, indicatinglights for selectorswitch,incoming/outgoingfeedersCTS contactorsfor complete asperspecifications andrequired.1 No. 630 Amps TPN incoming MCCB.1 Set 800 Amps TPN Aluminium conductor bus bar duly sleeved.
1553	13 Nos. 63 Amps MCCB outgoing along with 13 Nos. star delta starter for axial fan 15.0 kw motor. (1 No. Spare)
1554	XLPE INSULATED ARMOURED CABLES (LOOSE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
1555	Overall size 400sq.mm (3½ Core) Armoured (Loose)
1556	Overall size 4sq.mm (3Core) Armoured (Loose)
1557	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
1558	Cable Tray Size 450mm x 50mm x 50mm (2mm thick)
1559	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
1560	EarthingSupply and laying of double earthing continuity conductors of G.I. /G.S.S between panel boards and equipments as drawings. (May be checked at site).
1561	Providing & fixing of 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
1562	Providing & fixing of 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
1563	Sub Work-2 Sangat Hall Zone-2
1564	Sangat Hall VentilationZone-2Propeller FanSupply, installation, testing and commissioning of propeller fans for exhaust air as shown on drawings. Each fan shall be complete with permanenet split capacitor, mounting plate and accessories like wire guard, bird screen for weather protection as required, complete MCB panel and cabling, earthing as per specifications and drawings.630 mm dia, 5000 cfm
1565	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
1566	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
1567	Sub Work-2 A. MUSEUM,INTERPRETATION CENTRE & LEVEL + 85.05M Zone-3 Water Chilling Unit
1568	A. MUSEUM,INTERPRETATION CENTRE & LEVEL + 85.05M Zone-3 Water Chilling UnitSupply Installation,testing and commissioning of Aircooled screw chilling unit complete with semi hermetic/hermetically sealed screw compressor single/multi circuit chiller, aircooled condenser, microprocessor based control panel,chiller shall have star delta starter, refrigerant controls & piping, mounting base frame, foundations, foundation shall be vibration with anti vibration pads etc. complete as per specifications and drawings.Chilled water out : 7.2O CChilled water in : 12.8O CChiller F.F. :As Per AHRIDesign Outside Air Ambient 43.3 Degree CelciusIKW shall be 1.41 (on tender condition)110 TR ( Actual )
1569	Pump SetSupplying, installing, testing and commissioning of following Vertical Inline type chilled water PUMPS sets with bronze impeller fully enclosed type impeller shall be dynamically balanced, pump casing shall be cast iron suitable for 175 psig (12 bars) working pressure at 1400 F (600C). The casing shall be hydrostatically tested to 150% maximum working pressure. Mechanical seal shall be single spiring inside type with resin bonded carbon with stainless steel spring and hardware. TEFC squirrel cage, induction motor, base plate, pressure gauges at inlet and outlet, priming function.(Pumps shall be fitted with SS expansion joints on suction / discharge side, factory mounted on a common base with electric motor for recirculation of water for the central air conditioning system. Weather proof canopy shall be required. All pumps shall be aligned properly as required. The pump motor shall be suitable for 415 + 10% volts, 50 cycles, 3 phase power supply meeting criterion of ASHRAE standard 90.1 – 2007 and high efficiency.Pumps with performance characteristics as given below .Primary Chilled water pump, 264 USGPM at 12 mt. head
1570	SecondaryChilled WaterPumpswith Variable Speed Pumping System Supplying, installing, testing and commissioning of following Vertical Inline type chilled water PUMPS sets with bronze impeller fully enclosed type impeller shall be dynamically balanced, pump casing shall be cast iron suitable for 175 psig (12 bars) working pressure at 1400 F (600C). The casing shall be hydrostatically tested to 150% maximum working pressure. Mechanical seal shall be single spiring inside type with resin bonded carbon with stainless steel spring and hardware. TEFC squirrel cage, induction motor, base plate, pressure gauges at inlet and outlet, priming function.(Pumps shall be fitted with SS expansion joints on suction / discharge side, factory mounted on a common base with electric motor for recirculation of water for the central air conditioning system. Weather proof canopy shall be required. All pumps shall be aligned properly as required. The pump motor shall be suitable for 415 + 10% volts, 50 cycles, 3 phase power supply meeting criterion of ASHRAE standard 90.1 – 2007 and high efficiency.Pumps with performance characteristics as given below .
1571	Variable speed pumping system consisting of 1 No. (EFF-1 motor) pumps, 1 No. dedicated microprocessor based pump controller with parallel pumping software duly downloaded, 1 No. adjustable frequency drives and multiple differential pressure sensor/ transmitters as necessary and as described in the specifications.
1572	The entire system alongwith pumps must be sourced from single manufacturer only .The system shall be complete in all respects and suitable for following rating.Vertical inline secondary chilled water pump 264 USGPM at 25 mtr. Head.
1573	Variable Refrigerant Volume SystemSupply, installation, testing and commissioning of variable refrigerant volume modular typeairconditioning system complete with indoorand out door units with individual controller and with refrigerant piping, gas charging R-410, M.S. stand, control cabling asper detailgiven in specifications and having following items:
1574	Outdoor Unit14 HP(11.2 TR)
1575	Indoor UnitsVRV ductable unit 2047 cfm (6.36 Tons) .
1576	VRV ductable unit 1130 cfm (3.18 Tons) .
1577	VRV furredin unit 583 cfm (2.02 Tons) .
1578	Imported fittings Y-jointsand headers etc.
1579	Corded remote controls
1580	Airhandling Units(Floor Mounted Type)Supply, installation, testing and commissioning offactory builtfloor mounted chilled/hot water double skin type air handling units made of 25 mm thick panels consisting of G.I. casing of thickness 0.8 mm precoated outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation of density not less than 38 kg/cum, factory injected between them by injection molding machine, complete with DIDW forward curved centrifugal fan section suitable for static pressure as detailed below, fire retardent flexible connection, cooling/heating coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling/heating coil, filter sections with 50 mm thick metal washable synthetic type air pre-filters,belt drive package with TEFC high efficiency motor type EFF-2 suitable for 415+-10% volts.50 HZ, 3 Phase, A.C. supply, drain connections, stainless steel drain pan complete with all fittings and accessories, necessary vibration isolation arrangement etc.complete as per specifications and of following capacities.
1581	AHU FM 17,000 CFM,6 Row Cooling/Heating Coil, 57 TR, 50 mmwg Static Pressure,Forward Curved Blower,Pre Filter.
1582	Airhandling Units(Ceiling Suspended Type)
1583	Supply, installation, testing and commissioning offactory built ceiling suspended type chilled/hot water double skin type air handling units made of 25 mm thick panels consisting of G.I. casing of thickness 0.8 mm precoated outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation of density not less than 38 kg/cum, factory injected between them by injection molding machine, complete with DIDW forward curved centrifugal fan section suitable for static pressure as detailed below,fire retardent flexible connection,cooling/heating coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling/heating coil,filter sections with 50 mm thick metal washable synthetic type air pre-filters,belt drive package with TEFC high efficiency motor type EFF-2 suitable for 415+-10% volts.50 HZ, 3 Phase, A.C. supply,drain connections, stainless steel drain pan complete with all fittings and accessories, necessary vibration isolation arrangement etc.complete as per specifications and of following capacities.
1584	AHU CS 4,500 CFM,6 Row Cooling/Heating Coil, 15 TR, 40 mmwg Static Pressure,Forward Curved Blower,Pre Filter.(For Level +99.4M)
1585	AHU CS 3,000 CFM,6 Row Cooling/Heating Coil, 10 TR, 40 mmwg Static Pressure,Forward Curved Blower,Pre Filter.(For Level +94.6M)
1586	AHU CS 2,000 CFM,6 Row Cooling/Heating Coil, 7 TR, 32 mmwg Static Pressure,Forward Curved Blower,Pre Filter.(For Level +94.6M)
1587	PID ValvesSupply, installation, testing and commissioning of 2 way modulating valve cum pressure independent balancing valve along with actuator & proportionate thermostat, transformer complete as per specifications and drawings.
1588	100 mm dia
1589	50 mm dia
1590	40 mm dia
1591	Insulated Chilled/HotWater Piping (Nitrile Rubber Insulation)Supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled/hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastomeric nitrile rubber of class \"O\" insualtion applied by adhesive cofirming to standard specifications and finally applying 0.63 mm aluminium sheet cladding complete with type 3, grade 1 roofing feltstrip (as per IS : 1322 as amended upto date) at joints and repairing of damage to building etc. as per specifications and as required complete in all respect.Note : The pipes size 150 mm and below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.
1592	Piping
1593	100 mm (32 mm thick insulation)
1594	80 mm (32 mm thick insulation)
1595	65 mm (32 mm thick insulation)
1596	50 mm (32 mm thick insulation)
1597	40 mm (32 mm thick insulation)
1598	Insulated ValvesSupplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled/hot water plumbing duly insulated tothe same specifications as the connected piping andadequately supported as per specifications.
1599	Supply, installation, testing and commissioning of Motorized Butterfly Valves along with Controls Actuators, Control Wiring,Transformer etc.
1600	125 mm dia
1601	Butterfly Valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled/hot wate circulation as specified.
1602	125 mm
1603	100 mm
1604	50 mm
1605	Balancing Valve with Built in Measuring Facility with C I body flanged construction with EPDM coated disc with longpitch with protected out pipe insulation & PN 16 pressure rating for chilled/hot water circulation as specified.
1606	125 mm
1607	100 mm
1608	Non Return ValvesNon return valve with dual plate of CI body and SS plates vulcanized NBR seal flanged and PN 16 pressure rating for chilled/hotwater circulation including insulation as specified.
1609	125 mm
1610	Y - Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation includinginsulation as specified.
1611	125 mm
1612	100 mm
1613	50 mm
1614	Pot Strainer
1615	125 mm
1616	Ball Valves
1617	40 mm with strainer
1618	40 mm without strainer
1619	Flexible Connection
1620	125 mm
1621	Water flow switch
1622	Providing and fixing of in position the industrial type pressure gauges with gun metal / brass valves complete as required.
1623	Providing and fixing of in position the mercury in glass industrialtype thermometers.
1624	Auto Airvent 25 mm dia
1625	Burried Chilled/Hot Water PipingSuppluing, laying / fixing, testing and commissioning of following nominal sizes of chilled/hot water piping outside the builiding (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with PUF insualtion 36+2 kg /cum density, pipe section insulation covered with two layer of 120 gm/sqm polythene sheet (vapour barrier), chicken wire mesh and finished with tow coat PARACOAT- BPC of density 1.12 to 1.2 / kg.Note : The pipes size 150 mm and below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.
1626	125 mm
1627	100 mm
1628	Exposed Chilled / Hot Water Piping
1629	Supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled / hot water piping outside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainer, gauges etc.) duly insulated with PUF insulation 36+2 kg/cum density, pipe section insulation covered with two layer of 120 gm/sqm polythene sheet (vapour barrier) chicken wire mesh and finished with 26 ga aluminium cladding.Note : The pipes size 150 mm and below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.
1630	125 mm
1631	Refrigerant Piping
1632	Supply and installaiton of Interconnecting copper, refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation betweeneach set of indoor & outdoor units as perspecifications, all piping inside the buildingshallbe properlysupportedwith MS hanger and shall run in cable trayand all external piping shall run in covered cable tray.
1633	28.6 mm O.D.(insulation : 19 mm) (1.00 mm thickness)
1634	22.2 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1635	19.1 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1636	15.9 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1637	12.7 mm O.D.(insulation : 13 mm) (0.80 mm thickness)
1638	9.5 mm O.D.(insulation : 13 mm) (0.80 mm thickness)
1639	Air & Dirt Separator
1640	Supply, installation, testing and commissioning of Air & dirt separator mild steel construction, unit shall be able to remove free air and micro bubbles as well as remove solid particles upto 10 microns. Unit shall be as per specifications & drawings.
1641	125 mm dia (Working pressure 3.5 bar)
1642	Hot Water Generator
1643	Supply, installation,testing and commissioning of electrical HW generator with sufficient number of electrical imersion heaters. The pressure vessel shall be constructed as per ASME standards and insulated on all sides with 100 mm thick fiber glass and cladded with 0.80 mm aluminium sheet in a neat and clean manner. The generator shall be equipped with all automatic and safety controls such as manual reset high temperature water outlet,step controller and recycling relay,\"ON\" \"OFF\" switch thermostats,pilot light,low water cutoff and other controls as per manufacturers recommendations. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The generator shall be suitable for 415(+) (-) 10% volts,50 cycle,3 phase power supply. The entire generator shall be factory assembled and tested at 350 PSI pressure.Brand/model shall be approved by the engineer.Hot waterWater IN45.0O CWater OUT50.5O CWater flow rate504 lit/m180 kw
1644	Expansion Tank
1645	Supply,installation,testing and commissioning of PVC expansion tank 200 Liters complete with 50 mm thick expanded polystyrene (TF quality) insulation covered with vapour barrier, 0.5 mm x 20 mm GI wire mesh netting and finished with 0.5 mm thick GI cladding duly plastered and complete with vent and drain connections with float valve, quick fill and control valves etc.as required.Brand/model shall be approved by the engineer incharge.
1646	200 litres capacity
1647	Inline Fans
1648	Supply, installation, testing and commissioning of inline ducted fans of G.I. construction complete with centrifugal fan with motor, drive, canvassconnection at inlet & outlet complete with MCB panel with cabling and earthing(with 5 Rm). Fan shall be suitable for operation on 220+6% volts, 50 Hz, 1 Phase AC power supply. All single phase inline fans shall be provided with factory filled speed regulation and as per specification and drawings.
1649	3,800 cfm, 15 mmwg S.P.
1650	2,800 cfm,15 mmwg S.P.
1651	1,200 cfm,10 mmwg S.P.
1652	1,000 cfm,10 mmwg S.P.
1653	800 cfm,10 mmwg S.P.
1654	350 cfm,10 mmwg S.P.
1655	250 cfm,10 mmwg S.P.
1656	100 cfm,10 mmwg S.P.
1657	Axial Flow Fan
1658	Supply, installation, testing and commissioning of axial flow tube/vane type fresh/exhaust fan complete fan made out of M.S. / G.I. casing having cast aluminium alloy impeller with high efficiency Aero-foil section blade directly driven,with fan with motor, drive set, mounting frame, mounting accessories canvass connection, gravity damper of G.I. at fan outlet.All the fans are synthetic enamelled painted and complete with birdscreen at inlet as well as outlet. The electric motor coupler shall be squirrel cage induction motor confirming to IS - 325-IP-55 with class \"H\" insulation, motor shall be fire rated upto 250 degrees centigrade for 21/2 hour rating. Fan should be as per specification and drawings.Motor shall be suitable for 415V/50Hz/3 Phase power supply.( Fan to be suspended from ceiling/installed on wall required M.S. supports etc. and mounting accessories should be taken ).
1659	11,000 cfm, 40 mmwg static pressure
1660	10,500 cfm, 40 mmwg static pressure
1661	5,500 cfm, 40 mmwg static pressure
1662	Packaged Type Airwasher
1663	Providing, fixing, testing and commissioning packaged type airwasher in double skin construction comprising of DIDW backward curved centrifugal blower, TEFC energy efficient motor, belt, drive packaged, 50 mmthick 7 layer aluminium wire meshfilters, stainless steel 18 Gwetsection, 16 G SS bottom panel of blower section, locable volume control damper of G.I. at fan outlet, 200 mm cellulose paper pads of 90% efficiency, with 100 mm wide PVC eleminator, M.S. reinforced, piping, FRP distributor, double layer canvas connections 1 No. monobloc pump set along with fittings for capacities Mentioned below, M.S. frame for supports as per specification & drawings.
1664	13,500 CFMat 40 mmwg static pressure
1665	Exhaust Scrubber
1666	Providing, fixing, testing and commissioning of weather proof double skin DIDW centrifugal exhaust scrubber with fan with motor and drive (both fan and motor shall be mounted on a common frame using cushy foot mounting) with back suction and frontdischarge including vibration isolator, water tank with float valve, pump, distributor, nozzels, eleminator, piping & valve from tank to pump to distributor and M.S. frame for supports etc. as per specifications and drawings.
1667	15,000 cfm, 40 mm static pressure
1668	Supply and Installation ofPVC piping complete withfittings, supports as per specifications and dulyinsulated with6 mmthick closed cell nitrile rubber insulation.
1669	50 mm dia
1670	40 mm dia
1671	32 mm dia
1672	25 mm dia
1673	Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
1674	G.I. Sheet Metal Ducting (Rectangular)
1675	0.63 mm (24 Ga)
1676	0.80 mm (22 Ga)
1677	1.00 mm (20 Ga)
1678	1.25 mm (18 Ga)
1679	Supplying and fixing of following thickness duly laminated aluminum foilof mat finish closed cell Nitrile rubber (class \"O\") insulation on existing duct after applying two coats of coldsetting adhesive (CPRXcompound). The joints shall sealed with50 mm wide and 3 mm thick self adhesive nitrile rubber tapeinsulation complete as per specifications and as required.19 mm thick
1680	Duct Acoustic Lining
1681	Supply & installation ofduct acoustic lining with open cell nitrile rubber insulation of below mention thickness as per specifications and drawings.15 mm
1682	Grilles/Diffusers
1683	Supply, installation, testing and commissioning of Aluminium extruted powder coated supplyand returnairgrilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).
1684	Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
1685	Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers butwithout volume control dampers complete as required.
1686	Supplying, fixing testing commissioning of supply / return air diffusersof powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
1687	Supplying, fixing testing commissioning of Returnair diffusers of powder coated aluminium without volume control damperswith anti smudge ring & removable core.
1688	Fresh air Grilles
1689	Supply and installation of Fresh air grille of 18 Ga G.I. withlouvers, bird Screen and damper as per specifications and drawings.
1690	Acoustic Insulation for AHU Room
1691	Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25 X 50 X50 X 50 X 25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc.complete as required and as per specifications.
1692	Volume Control Damper
1693	Supply, installation,testing & commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
1694	Flexible Duct Connection
1695	Supply and installaiton ofFire retardant non porous doublelayerflexible connectionbetweeneach indoor unit and duct.
1696	Fire Damper
1697	Supplying, fixing, testing and commissioning of fire dampers insupply air duct/main branch and return air path as and wherere quired of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signalcomplete as required and as per specifications.
1698	Fire dampers
1699	Actuator assembly (10 NM)
1700	Electric Panel Board
1701	Supply, installation,testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of 2.0 mm thick steel sheet duly painted complete with voltmeter, ammeter, indicating lights for selector switch, incoming/outgoing feeders CTS contactors for complete as per specifications and required.1 No. 630 Amps TPN incoming MCCB.1 set 800 Amps TPN Aluminium conductor bus bar duly sleeved.2 Nos. 630 Amps MCCB outgoing for chilling unit. (One Standby)2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for primary chilled water pump (3.7 kw) (One Standby).2 Nos. 63 Amps MCCB outgoing for secondary pumpand space for VFD (11.0 kw) (One Standby).2 Nos. 630 Amps TPN MCCB outgoing for Hot water generator of 180 kw along with mechanical interlocking with chiller i.e. either chiller or Hot water generator will run. (One Standby)
1702	Supply, installation, testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of2.0mmthick steel sheet duly painted complete withvoltmeter, ammeter, indicatinglights for selectorswitch,incoming/outgoingfeedersCTS contactorsfor complete asperspecifications andrequired.
1703	3 Nos. 63 Amps MCCB outgoing along with 3 Nos. star deltastarter for AHU 11.0 kw motor. (One Spare)
1704	3 Nos. 16 Amps MCB outgoing along with 3 Nos. DOL starter for AHU 2.2 kw motor. (One Spare)
1705	3 Nos. 10 Amps MCB outgoing along with 3 Nos. DOL starter for AHU 1.5 kw motor. (One Spare)
1706	2 Nos. 10 Amps MCB outgoing along with 2 Nos. DOL starter for AHU 1.1 kw motor. (One Spare)
1707	Supply, installation, testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of2.0mmthick steel sheet duly painted complete withvoltmeter, ammeter, indicatinglights for selectorswitch,incoming/outgoingfeedersCTS contactorsfor complete asperspecifications andrequired.
1708	3 Nos. 25 Amps MCB outgoing along with 3 Nos. DOL starter for Axial fan 5.5 kw motor. (One Spare)
1709	2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for Axial fan 3.7 kw motor. (One Spare)
1710	Supply, installation, testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of2.0mmthick steel sheet duly painted complete withvoltmeter, ammeter, indicatinglights for selectorswitch,incoming/outgoingfeedersCTS contactorsfor complete asperspecifications andrequired.
1711	3 Nos. 32 Amps MCB outgoing along with 3 Nos. star delta starter for airwasher and scrubber 7.5 kw motor. (One spare)3 Nos. 5 Amps MCB outgoing for Airwasher &Scrubber pump.(One Spare)
1712	Electrical Panle For Level 88.65 M (VRV)
1713	Supply, installation, testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of2.0mmthick steel sheet duly painted complete withvoltmeter, ammeter, indicatinglights for selectorswitch,incoming/outgoingfeedersCTS contactorsfor complete asperspecifications andrequired.
1714	INCOMING:1 No.63A 415 volt 10 kA 4P MCCB with microprocessor based release.
1715	BUS BAR:Electrolyte high conductivity aluminium three phase and neutral busbars rated at 100 A. having a maximum current density of 1 amp. Per sq.mm. Suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The netutral busbars is to be of 50% capacity.INDICATING PANEL:Incomer shall have the following indicating panel.Single phase Digital Voltmeter, 96mm sq., 0-100 volt with 3 way ON/OFF selector switch.Three nos. 100/5 class 1.0 accuracy 15 VA burden C.T.s for metering.Single phase Digital Ammeter 0-100 amps for CT ratio 100/5A with 3 way ON/OFF selector switch.Three phase indicating lights.LED type with control fuses for protection
1716	OUTGOING UNITS:2 Nos. 40A. 415 volts 4P RCBO. (25 kA) with thermal magnetic release - for Outdoor Unit.(1 No.Spare)2 Nos. 6A. 220-240 volts 2P MCB - (10 kA) with thermal magnetic release - for Indoor unit 3.1 TR, 2.02 TR(1 No.Spare)The switchboard shall be complete with all interconnection risers internal wiring lables etc. complete as required.
1717	Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
1718	Overall size 400sq.mm (3½ Core) Armoured (Loose)
1719	4 C - 10 sqmm (Copper for VRV Outdoor Unit)
1720	Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-Overall size 6sq.mm (4Core) Armoured (Loose)
1721	Overall size 4sq.mm (3Core) Armoured (Loose)
1722	4 C - 1.5 sqmm
1723	Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
1724	Overall size 2.5sq.mm (50/0.25mm), 3Core
1725	Cable Tray
1726	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
1727	Cable Tray Size 450mm x 50mm x 50mm (2mm thick)
1728	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
1729	PVC Pipe / PVC Tray
1730	Supply and installaiton of150 mm dia PVC pipes / tray for running refrigerant pipes thru shaft.
1731	Control & Transmission Wiring
1732	Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (48/0.20mm), 2Core
1733	Controller Wiring
1734	Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (48/0.20mm), 2Core
1735	Switchgear
1736	Supply and installaiton of 63 Amps 4P MCCB near each outdoor unit.
1737	Earthing
1738	Supply and laying of double earthing continuity conductors of G.I. /G.S.S between panel boards and equipments as drawings. (May be checked at site).
1739	Providing & fixing of 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
1740	Providing & fixing of 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
1741	Total;
1742	PID Valves
1743	Supply, installation, testing and commissioning of 2 way modulating valve cum pressure independent balancing valve along with actuator & proportionate thermostat, transformer complete as per specifications and drawings.
1744	100 mm dia
1745	65 mm dia
1746	50 mm dia
1747	Insulated Chilled / HotWater Piping (Nitrile Rubber Insulation)
1748	Supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled/hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastomeric nitrile rubber of class \"O\" insualtion applied by adhesive cofirming to standard specifications and finally applying 0.63 mm aluminium sheet cladding complete with type 3, grade 1 roofing feltstrip (as per IS : 1322 as amended upto date) at joints and repairing of damage to building etc. as per specifications and as required complete in all respect.
1749	Note : The pipes size 150 mm and below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.
1750	Piping
1751	125 mm (32 mm thick insulation)
1752	100 mm (32 mm thick insulation)
1753	80 mm (32 mm thick insulation)
1754	65 mm (32 mm thick insulation)
1755	50 mm (32 mm thick insulation)
1756	Insulated Valves
1757	Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled/hot water plumbing duly insulated tothe same specifications as the connected piping andadequately supported as per specifications.
1758	Supply, installation, testing and commissioning of Motorized Butterfly Valves along with Controls Actuators, Control Wiring,Transformer etc.
1759	125 mm dia
1760	Butterfly Valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled/hot wate circulation as specified.
1761	125 mm
1762	100 mm
1763	65 mm
1764	50 mm
1765	Balancing Valve with Built in Measuring Facility with C I body flanged construction with EPDM coated disc with longpitch with protected out pipe insulation & PN 16 pressure rating for chilled/hot water circulation as specified.
1766	125 mm
1767	Non Return Valves
1768	Non return valve with dual plate of CI body and SS plates vulcanized NBR seal flanged and PN 16 pressure rating for chilled/hotwater circulation including insulation as specified.
1769	125 mm
1770	Y - Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation includinginsulation as specified.
1771	125 mm
1772	100 mm
1773	65 mm
1774	50 mm
1775	Pot Strainer
1776	125 mm
1777	Flexible Connection
1778	125 mm
1779	Water flow switch
1780	Providing and fixing of in position the industrial type pressure gauges with gun metal / brass valves complete as required.
1781	Providing and fixing of in position the mercury in glass industrialtype thermometers.
1782	Auto Airvent 25 mm dia
1783	Burried Chilled/Hot Water Piping
1784	Suppluing, laying / fixing, testing and commissioning of following nominal sizes of chilled/hot water piping outside the builiding (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with PUF insualtion 36+2 kg /cum density, pipe section insulation covered with two layer of 120 gm/sqm polythene sheet (vapour barrier), chicken wire mesh and finished with tow coat PARACOAT- BPC of density 1.12 to 1.2 / kg.
1785	Note : The pipes size 150 mm and below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.
1786	125 mm
1787	Exposed Chilled / Hot Water Piping
1788	Supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled / hot water piping outside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainer, gauges etc.) duly insulated with PUF insulation 36+2 kg/cum density, pipe section insulation covered with two layer of 120 gm/sqm polythene sheet (vapour barrier) chicken wire mesh and finished with 26 ga aluminium cladding.Note : The pipes size 150 mm and below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.
1789	125 mm
1790	Air & Dirt Separator
1791	Supply, installation, testing and commissioning of Air & dirt separator mild steel construction, unit shall be able to remove free air and micro bubbles as well as remove solid particles upto 10 microns. Unit shall be as per specifications & drawings.
1792	125 mm dia (Working pressure 3.5 bar)
1793	Drain Piping
1794	Supply and Installation ofPVC piping complete withfittings, supports as per specifications and dulyinsulated with6 mmthick closed cell nitrile rubber insulation.
1795	50 mm dia
1796	40 mm dia
1797	32 mm dia
1798	Sarai BuildingZone-5
1799	Variable Refrigerant Volume System
1800	Supply, installation, testing and commissioning of variable refrigerant volume modular typeairconditioning system complete with indoorand out door units with individual controller and with refrigerant piping, gas charging R-410, M.S. stand, control cabling asper detailgiven in specifications and having following items:
1801	Outdoor Unit
1802	36 HP(28.8 TR)
1803	12 HP(9.6 TR)
1804	10 HP(8.0 TR)
1805	Indoor Units
1806	Vertical floor standing duct type / floor stanidng AHU type 6072 cfm (15.9 Tons).
1807	Vertical floor standing duct type / floor stanidng AHU type 4730 cfm (12.8 Tons).
1808	VRV ductable unit 2542 cfm (7.95 Tons)
1809	VRV round flow cassette unit 1130 cfm (3.18 Tons)
1810	Imported fittings Y-jointsand headers etc.
1811	Corded remote controls
1812	Main centrallised controller suitable for groups of indoor units.
1813	HRV Unit
1814	Supply, installation, testing and commissioning of heat reclaim ventilation unit with inlet and exhaust blower with fan (Inlet & exhaust) desiccant absorption material non contact seal, modular design with Aluminium supports of extruded section, galvanized steel plate casing, self extinguishable polyurethene foam insulation, multi-directional fibrous fleeces air filtercomplete as per requirements.
1815	2000 CMH
1816	Refrigerant Piping
1817	Supply and installaiton of Interconnecting copper, refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation betweeneach set of indoor & outdoor units as perspecifications, all piping inside the buildingshallbe properlysupportedwith MS hanger and shall run in cable trayand all external piping shall run in covered cable tray.
1818	41.3 mm O.D.(insulation : 19 mm) (1.2 mm thickness)
1819	34.9 mm O.D.(insulation : 19 mm) (1.2 mm thickness)
1820	28.6 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1821	22.2 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1822	19.1 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1823	15.9 mm O.D.(insulation : 13 mm) (1.00 mm thickness)
1824	12.7 mm O.D.(insulation : 13 mm) (0.80 mm thickness)
1825	9.5 mm O.D.(insulation : 13 mm) (0.80 mm thickness)
1826	Packaged Type Airwasher
1827	Providing, fixing, testing and commissioning packaged type airwasher in double skin construction comprising of DIDW backward curved centrifugal blower, TEFC energy efficient motor, belt, drive packaged, 50 mmthick 7 layer aluminium wire meshfilters, stainless steel 18 Gwetsection, 16 G SS bottom panel of blower section, locable volume control damper of G.I. at fan outlet, 200 mm cellulose paper pads of 90% efficiency, with 100 mm wide PVC eleminator, M.S. reinforced, piping, FRP distributor, double layer canvas connections 1 No. monobloc pump set along with fittings for capacities Mentioned below, M.S. frame for supports as per specification & drawings.
1828	10,000 CFMat 30 mmwg static pressure
1829	Exhaust Scrubber
1830	Providing, fixing, testing and commissioning of weather proof double skin DIDW centrifugal exhaust scrubber with fan with motor and drive (both fan and motor shall be mounted on a common frame using cushy foot mounting) with back suction and frontdischarge including vibration isolator, water tank with float valve, pump, distributor, nozzels, eleminator, piping & valve from tank to pump to distributor and M.S. frame for supports etc. as per specifications and drawings.
1831	11,000 cfm, 30 mm static pressure
1832	Inline Fans
1833	Supply, installation, testing and commissioning of inline ducted fans of G.I. construction complete with centrifugal fan with motor, drive, canvassconnection at inlet & outlet complete with MCB panel with cabling and earthing(with 5 Rm). Fan shall be suitable for operation on 220+6% volts, 50 Hz, 1 Phase AC power supply. All single phase inline fans shall be provided with factory filled speed regulation and as per specification and drawings.
1834	400 cfm, 10 mmwg S.P.
1835	Drain Piping
1836	Supply and Installation ofPVC piping complete withfittings, supports as per specifications and dulyinsulated with6 mmthick closed cell nitrile rubber insulation.
1837	50 mm dia
1838	40 mm dia
1839	32 mm dia
1840	Ducting
1841	Supply and installaiton ofsheet metal ducting complete with supports, neoprone gaskets, vanes, dampers etc.as per specifications & drawings.
1842	G.I. Sheet Metal Ducting (Rectangular)
1843	0.63 mm (24 Ga)
1844	0.80 mm (22 Ga)
1845	1.00 mm (20 Ga)
1846	1.25 mm (18 Ga)
1847	Insulation
1848	Supplying and fixing of following thickness duly laminated aluminum foilof mat finish closed cell Nitrile rubber (class \"O\") insulation on existing duct after applying two coats of coldsetting adhesive (CPRXcompound). The joints shall sealed with50 mm wide and 3 mm thick self adhesive nitrile rubber tapeinsulation complete as per specifications and as required.
1849	19 mm thick
1850	Supply and installation of nitrile rubber insulation on ducts complete as per specifications and drawings.
1851	9 mm thick
1852	Acoustic Insulation for AHU Room
1853	Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25 X 50 X50 X 50 X 25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc.complete as required and as per specifications.
1854	Duct Acoustic Lining
1855	Supply & installation ofduct acoustic lining with open cell nitrile rubber insulation of below mention thickness as per specifications and drawings.
1856	15 mm thick
1857	Grills/Diffusers
1858	Supply, installation, testing and commissioning of Aluminium extruted powder coated supplyand returnairgrilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).
1859	Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
1860	Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers butwithout volume control dampers complete as required.
1861	Supplying, fixing testing commissioning of supply / return air diffusersof powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
1862	Volume Control Damper
1863	Supply, installation,testing & commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
1864	Flexible Duct
1865	Supply and installaiton ofaluminium wired flexible insulated duct complete as per specifications and drawings.
1866	350 mm dia
1867	Fresh air Grilles
1868	Supply and installation of Fresh air grille of 18 Ga G.I. withlouvers, bird Screen and damper as per specifications and drawings.
1869	Flexible Duct Connection
1870	Supply and installaiton ofFire retardant non porous doublelayerflexible connectionbetweeneach indoor unit and duct.
1871	Fire Damper
1872	Supplying, fixing, testing and commissioning of fire dampers insupply air duct/main branch and return air path as and wherere quired of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signalcomplete as required and as per specifications.
1873	Fire dampers
1874	Actuator assembly (10 NM)
1875	PVC Pipe / PVC Tray
1876	Supply and installaiton of150 mm dia PVC pipes / tray for running refrigerant pipes thru shaft.
1877	Control & Transmission Wiring
1878	Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (48/0.20mm), 2Core
1879	Controller Wiring
1880	Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (48/0.20mm), 2Core
1881	Switchgear
1882	Supply and installaiton of 63 Amps 4P MCCB near each outdoor unit.
1883	Cable Tray
1884	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
1885	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
1886	Electrical Panel Board (Airconditioning)
1887	Distribution Boards and Panels
1888	Design, fabrication, assembling, wiring and supply installation, connecting, testing & commissioning of following totaly enclosed, compartmentalized, indoor mounting, free standing, front operated, dust & vermin proof IP 42, distribution panels fabricated out of 14/16 gauge CRCA sheet steel in cubicle formation with reinforcement of suitable size angle iron, channels irons, flats wherever necessary for large distribution panels. The boards shall be treated with all anticorrosive process before painting as per standards with Powder coated with seven tank process with final approved shade of enameled paint, 2 Nos. earthing terminals shall be provided for 3 phase distribution panels. The panels shall be suitable for 415 V, 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall be fabricated in easily transportable sections & length, height, depth etc to match with site conditons, including the cost of interconnections with heavy duty copper crimping lugs, bonding to earth suitable for a fault level of 25 MVA symmetrical at 415 volts, as per the technical specification complete in all respect as required. Prior approval of GA drawing and scheme of panel shall be taken for each panel before final manufacture. Galvanized hardware with zinc passivation shall be used in fabrication of boards. Suitable earth bus to be provided throughout length of Panels.
1889	All switchboardshall have provision for entry of cables from the top and bottom as required.
1890	All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC / DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders; doors and switch handles shall be lockable in OFF position.
1891	AC MAIN PANEL INCOMING:1 No. 250A 415 volt 35 kA 4P MCCB with microprocessor based release.
1892	BUS BAR:Electrolyte high conductivity aluminium three phase and neutral busbars rated at 400 A. having a maximum current density of 1 amp. Per sq.mm. Suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The netutral busbars is to be of 50% capacity.
1893	INDICATING PANEL:Incomer shall have the following indicating panel.Single phase Digital Voltmeter, 96mm sq., 0-400 volt with 3 way ON/OFF selector switch.Three nos. 400/5 class 1.0 accuracy 15 VA burden C.T.s for metering.Single phase Digital Ammeter 0-400 amps for CT ratio 400/5A with 3 way ON/OFF selector switch.Three phase indicating lights.LED type with control fuses for protection
1894	OUTGOING UNITS:5 Nos. 40A. 415 volts 4P, RCBO - (300 mAsensitivity) (1 No.Spare).3 Nos. 25A. 415 volts 4P RCCB - (10 kA) with thermal magnetic release - for Floor Standing Unit / AHU (1 No.Spare)3 Nos. 16A. 220-240 volts 2P MCB - (10 kA) with thermal magnetic release - for Ductable Unit / HRV Unit (1 No.Spare)4 Nos. 6A. 220-240 volts 2P MCB - (10 kA) with thermal magnetic release - for Cassette Unit (1 No.Spare)The switchboard shall be complete with all interconnection risers internal wiring lables etc. complete as required.
1895	Supply, installation, testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of2.0mmthick steel sheet duly painted complete withvoltmeter, ammeter, indicatinglights for selectorswitch,incoming/outgoingfeedersCTS contactorsfor complete asperspecifications andrequired.
1896	3 Nos. 16 Amps MCB outgoing along with 3 Nos. DOL starter for airwasher and scrubber 3.7 kw motor. (One spare)
1897	3 Nos. 5 Amps MCB outgoing for Airwasher &Scrubber pump.(One Spare)
1898	Power Cabling
1899	Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
1900	Overall size 50sq.mm (3½ Core) Armoured (Loose)
1901	4 C - 10 sqmm (Copper for VRV Outdoor Unit)
1902	4 C - 6 sqmm (Copper)
1903	4 C - 4 sqmm (Copper)
1904	Overall size 4sq.mm (3Core) Armoured (Loose)
1905	4 C - 1.5 sqmm
1906	Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-
1907	Overall size 1.0sq.mm (32/0.20mm), 2Core
1908	Earthing
1909	Supply and laying of double earthing continuity conductors of G.I. /G.S.S between panel boards and equipments as drawings. (May be checked at site).
1910	Providing & fixing of 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
1911	Providing & fixing of 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
1912	SEWERAGE AND DRAINAGE WORK
1913	Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths asshown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boningrods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects. Depth not exceeding 3 m. BGL For Semi Conglomerate soil having gravel/boulder above 40% up to 50%
1914	For depth exceeding 3.00 m but not exceeding 4.5 B.G.L For Semi Conglomerate soil having gravel/boulder above 40% up to 50%
1915	Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concretemixer volumetric type
1916	Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as perIS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing ofrubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. R.C.C. Pipe NP -3 600mm i/d pipe
1917	Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as perIS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing ofrubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. R.C.C. Pipe NP -4 1000mm i/d pipe
1918	Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard designcomplete in all respects. Inside size 150x180 cm and 120 cm deep
1919	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 upto 1.80 m increase in depth. Inside size 150x180 cm
1920	1.2m to 1.5m
1921	1.5m to 1.8m
1922	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 beyond 1.80 m upto 4.5 m beyond addiational depth. Inside size 150x180 cm
1923	1.8m to 2.1m
1924	2.1m to 2.4m
1925	2.4m to 2.7m
1926	2.7m to 3.0m
1927	3.0m to 3.3m
1928	3.3m to 3.6m
1929	3.6m to 3.9m
1930	3.9m to 4.2m
1931	4.2m to 4.5m
1932	Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) infoundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. 600mm x 900mm inside with 455mm x455mm cover and frame light duty double seal
1933	Extra for filling earth in 15 cm layers and compaction
1934	ELECTRICAL SERVICES
1935	ENTRANCE PLAZA, BASEMENT (ZONE-1):
1936	POINT & SUBMAIN WIRING:
1937	REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01)
1938	Wiring fan point with sheet metal fan box
1939	Wiring light point
1940	Wiring call-bell point
1941	Wiring 3 pin 6 Amp. wall socket point
1942	Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
1943	Wiring 3 pin 16/20 amp. power plug control point
1944	COPPER WIRES & CONDUIT PIPE:
1945	PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
1946	Overall size 1sq.mm (Un-sheathed)
1947	Overall size 1.5sq.mm (Un-sheathed)
1948	Overall size 2.5sq.mm (Un-sheathed)
1949	Overall size 4sq.mm (Un-sheathed)
1950	Overall size 6sq.mm (Un-sheathed)
1951	Overall size 10sq.mm (Un-sheathed)
1952	Overall size 16sq.mm (Un-sheathed)
1953	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
1954	Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)
1955	Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1956	Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
1957	Heavy Gauge PVC Conduit Pipe 20mm dia. (On-surface)
1958	Heavy Gauge PVC Conduit Pipe 25mm dia. (On-surface)
1959	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
1960	PVC flexible pipe 40mm dia.
1961	Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
1962	PVC compression Socket gland 40mm dia.
1963	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Casing \"n\" Capping (Double Lock) ISI markedfor wiring purposes including cost of bends (L), (U), (T) & inspection boxes etc., where necessary including other petty material:-
1964	PVC Casing \"n\" Capping Size 20mm x 12mm
1965	PVC Casing \"n\" Capping Size 25mm x 16mm
1966	SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-
1967	Powder Coated Concealed Metal Box with Brass Lugs One/Two Module
1968	Powder Coated Concealed Metal Box with Brass Lugs Three Module
1969	Powder Coated Concealed Metal Box with Brass Lugs four Module
1970	Powder Coated Concealed Metal Box with Brass Lugs Six Module
1971	Powder Coated Concealed Metal Box with Brass Lugs Eight Module
1972	Powder Coated Concealed Metal Box with Brass Lugs Twelve Module
1973	HEAVY GUAGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
1974	Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
1975	MAIN /SUB DISTRIBUTION BOARDS & DISTRIBUTION BOARDS:
1976	ZONE-1
1977	LT PANELS & MCCB\"s (MOULDED CASE CIRCUIT BREAKERS):Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
1978	Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB\"s. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of MCCB\"s to be installed in the cubical panel Enclosure (Excluding the cost of MCCB\"s) as per following:-
1979	MDB-ENTRANCE PLAZA, UPPER BASEMENT:
1980	LT Panel enclosure having space for 1No. Incomer MCCB 160Amp. and 4Nos. outgoing MCCB\"s40amp. to 100amp. according to the requirement at site (Approx. size 1825 x 900 x 300mm) (DETAIL SEE IN THE PANEL INVENTORY)
1981	MCCB\"s (MOULDED CASE CIRCUIT BREAKER):Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevantPWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc
1982	MCCB Four Pole 100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
1983	MCCB Four Pole 80amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
1984	MCCB Four Pole 40amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
1985	EMDB- ENTRANCE PLAZA, UPPER BASEMENT:
1986	Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacture should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP44).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS:8623. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. The base channel will be made out of 75mm x 40mm x 5mm rolled channel. \"The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc.
1987	Painting:The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work. Busbars: The panel shall be provided with TPN copper busbar of suitable size according to the size of MCCB\"s.All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard). The Concerned contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of ACB/MCCB\"s to be installed in the cubical panel Enclosure (including the cost of MCCB\"s+E.R.H.) as per following.
1988	Incomer:¦ MCCB 630A, 415V breaking capacity =36kA 4P microprocessor based adjustable thermal and magnetic protection= 1No.Outgoings: ¦ MCCB 250A, 415V breaking capacity =36kA 4P microprocessor based adjustable thermal and magnetic protection= 3Nos.¦ MCCB 200A, 415V breaking capacity =25kA 4P microprocessor based adjustable thermal and magnetic protection= 4Nos.¦ MCCB 100amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 3Nos.¦ MCCB 40amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 9Nos.¦All Incomers & Out going With Extendable Rotary Handle with adjustable depth complete as per schematic diagram attached & Satisfaction of the Engineer in charge at site.Enclosure:Panel Size: As per NormsPanel builders Make: Kalyani Switchgear, ETE Electrogears, Power Associates, Unix, CMKL
1989	ESDB- UPPER BASEMENT:
1990	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s:Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB\"s as incomer and outgoings SP/TPminiature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
1991	TP&NDouble Door Vertical DB\"s 4 way each (With provision of FP MCCB upto 125amp)
1992	Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
1993	MCCB Four Pole 63/80/100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
1994	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
1995	MCB Single Pole 6-32amp. (10kA, Curve-C)
1996	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
1997	SP&N Double Door Distribution Board 8 way each
1998	TP&N Vertical Double Door Distribution Board4 way each.
1999	TP&N Vertical Double Door Distribution Board 8 way each.
2000	Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
2001	Cable End Box for SPN 8 Way
2002	Cable End Box for TPN Vertical 4/8/12Way
2003	MCB\"S & MCB DISTRIBUTION BOARDS:
2004	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2005	MCB Single Pole 6-32amp. (10kA, Curve-C)
2006	MCB Double Pole 40amp. (10kA, Curve-C)
2007	MCB Four Pole 40amp. (10kA, Curve-C)
2008	RCCB\"s:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kAas per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2009	RCCB Double Pole 32/40amp., Sensitivity 100mA
2010	CABLES & SUBMAIN WIRING:
2011	XLPE INSULATED ARMOURED CABLES (ON SURFACE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
2012	Overall size 25sq.mm (3½ Core) Armoured (On-Surface)
2013	Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
2014	Aluminium thimble cable Core size 10 -16sq.mm
2015	Aluminium thimble cable Core size 25 -35sq.mm
2016	Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections
2017	Brass Gland for Aluminium cable 2/3/3½/4 Core size 25-35sq.mm
2018	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
2019	Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2020	Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
2021	Heavy Gauge PVC Conduit Pipe 50mm dia. (Flushed)
2022	CABLE TRAY:
2023	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
2024	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
2025	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
2026	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
2027	Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
2028	Double walled corrugated (DWC) HDPE pipe 90/76mm (outer/ inner dia.)
2029	Double walled corrugated (DWC) HDPE pipe160/136mm (outer/ inner dia.)
2030	EARTHING SYSTEM:
2031	G.I. EARTHING:Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).
2032	Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 8Metre in length)
2033	COPPER EARTHING (Upto 8 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc.,up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2034	Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
2035	COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
2036	Additional Length 20mm x 3mm thick Copper Tape
2037	G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc.
2038	Additional length G.I. rope 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (On Surface)
2039	LIGHT FIXTURES AND FANS:
2040	Supply and erection of LED batten 20watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Philips BN02IC LED20S PSU CW GRS2, Havell\"s ENDURALINEARNEOBS20WLED865SPCWH,Crompton CCS-103-20-65-SL-DP-NWH, Wipro LL20-281-XXX-65 ALI, Panasonic PBTM08208, Bajaj BCLAB 20W WH LED P
2041	S/E of LED 18 watt surface mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.LCDSPLN-R-18CDL, WIPRO Cat No. LD80-171-XXX-60-SM, Bajaj Cat No-BZSLOS NXT 18L LED WH SD
2042	Supply, installation, testing and commissioning of 6 watt LED (including LED driver) burried in ground light fixture complete as required and all accessories as required. Wipro LI20-600-030-30-XX or its equivalent
2043	Supply, Installation, Testing and Commissioning of 35W, 24V DC Driver suitable for under water luminaires complete in all respect with satisfaction of the Engineer-in-charge.MAKE: WIPRO Cat. No.LPV-35-12/24 (For IN Ground Burried Fixtures) or its equivalent
2044	Supply and erection of LED batten 10watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Wipro Cat. No.LL20-111-XXX-65NE3, Bajaj Cat No.BCLSB10NW, Crompton Cat. No.CCS-103-10-65-SL-DP-NWH
2045	S/E of LED 12 watt recessed mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.CDR-205-12-57-SL-NWH, WIPRO Cat No. LD90-141-XXX-65-XX, Bajaj Cat No-BZSLO NXT 12L LED WH SD
2046	Supply and erection ofLEDBulk Head 9/10 wattIP65 surface mounted, pressure die cast housing complete in all respects as approved. and desired by the Engineer in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATBP/20/GL Dated 30/11/2017Make:-CROMPTON Cat No. LBHE10CDL, Philips Cat. No.WT202W LED6S NW PSU S2 PC,WIPRO Cat. No. LW07-141-XXX-57-XX, Bajaj Cat. No. BIBWP 10W LED.
2047	Supply, installation, testing and commissioning of Step light recess mounted 4-6W LED fixture (including driver) and all accessories as required. Make: Crompton Cat. No. LSL-6-CDL, Bajaj Cat. No.BLSGV 4W LED WH, Havell\"s Cat. No. RADIANTNEOFT07WLED830SASYMBOPC
2048	S/E of M S powder coated & glass finsihed 5 x 9 W Surface mounted cluster light fixture with 9W LED Lamp and all accessories as required with complete satisfaction of Engineer-in-charge.Decon Cata. Ref. 03RN. or its equivalent
2049	Supply, installation, testing and commissioning of 5-6 watt per meter (Low) Flexible strip light with Driver and all accessories as required of Bajaj Cat. No. .NXT 25W PROFESSIONAL LED STRIP IP20 WH, Wiro Cat. No. LS06-005-120-65-50, Havell\"s Cat. No. FLEXISTRIP5MIP2024V/1ALED865S
2050	SUPPLY AND ERECTION OF WIRING ACCESSORIES:
2051	Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
2052	Bakelite Batten Holder (Large size)
2053	Supply and erection of Ceiling Fan 1200mm (48\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS or equivalent.
2054	Supply and erection of Ceiling Fan 900mm (36\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS
2055	Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearinglonger life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make: Crompton EXHD300-6-1, Havells Turbo Force SP, Orient (Heavy Duty)
2056	TELEPHONE & EPABX SYSTEM:
2057	RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
2058	Wiring Telephone socket point RJ11 (one module)
2059	Supply & erection of20 Pair 0.5mm jelly filled Armored cable manufactured as per ITD specification with up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton, Finolex, RR kabel, Polycab, Shalimar.
2060	Supply and erection of 30 pairs MDF with krone modules & lockable box complete in all respect as desired by the engineer in charge at site. Make: Krone, M-Tel, Reliance, A-Tel, Airtele
2061	SANGAT HALL (ZONE-2):
2062	POINT & SUBMAIN WIRING:
2063	REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01)
2064	Wiring fan point with sheet metal fan box
2065	Wiring light point
2066	Wiring call-bell point
2067	Wiring 3 pin 6 Amp. wall socket point
2068	Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
2069	Wiring 3 pin 16/20 amp. power plug control point
2070	COPPER WIRES & CONDUIT PIPE:
2071	PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
2072	Overall size 1sq.mm (Un-sheathed)
2073	Overall size 1.5sq.mm (Un-sheathed)
2074	Overall size 2.5sq.mm (Un-sheathed)
2075	Overall size 4sq.mm (Un-sheathed)
2076	Overall size 6sq.mm (Un-sheathed)
2077	Overall size 10sq.mm (Un-sheathed)
2078	Overall size 16sq.mm (Un-sheathed)
2079	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2080	Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)
2081	Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
2082	Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
2083	Heavy Gauge PVC Conduit Pipe 20mm dia. (On-surface)
2084	Heavy Gauge PVC Conduit Pipe 25mm dia. (On-surface)
2085	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
2086	PVC flexible pipe 40mm dia.
2087	Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
2088	PVC compression Socket gland 40mm dia.
2089	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Casing \"n\" Capping (Double Lock) ISI markedfor wiring purposes including cost of bends (L), (U), (T) & inspection boxes etc., where necessary including other petty material:-
2090	PVC Casing \"n\" Capping Size 20mm x 12mm
2091	PVC Casing \"n\" Capping Size 25mm x 16mm
2092	SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-
2093	Powder Coated Concealed Metal Box with Brass Lugs One/Two Module
2094	Powder Coated Concealed Metal Box with Brass Lugs Three Module
2095	Powder Coated Concealed Metal Box with Brass Lugs four Module
2096	Powder Coated Concealed Metal Box with Brass Lugs Six Module
2097	Powder Coated Concealed Metal Box with Brass Lugs Eight Module
2098	Powder Coated Concealed Metal Box with Brass Lugs Twelve Module
2099	HEAVY GUAGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
2100	Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
2101	MAIN /SUB DISTRIBUTION BOARDS & DISTRIBUTION BOARDS:
2102	ZONE-2
2103	LT PANELS & MCCB\"s (MOULDED CASE CIRCUIT BREAKERS):Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
2104	Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB\"s. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of MCCB\"s to be installed in the cubical panel Enclosure (Excluding the cost of MCCB\"s) as per following:-
2105	EMDB-SANGAT HALL:
2106	LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 10Nos. outgoing MCCB\"s40amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1800 x 400mm)
2107	SDB-SANGAT HALL:
2108	LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB\"s40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)
2109	MCCB\"s (MOULDED CASE CIRCUIT BREAKER):Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevantPWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc.
2110	MCCB Four Pole 250amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
2111	MCCB Four Pole 100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2112	MCCB Four Pole 63amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2113	MCCB Four Pole 40amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2114	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
2115	TP&N Vertical Double Door Distribution Board4 way each.
2116	TP&N Vertical Double Door Distribution Board 8 way each.
2117	TP&NVertical Double Door Distribution Board 12 way each
2118	Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
2119	Cable End Box for TPN Vertical 4/8/12Way
2120	MCB\"S & MCB DISTRIBUTION BOARDS:
2121	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2122	MCB Single Pole 6-32amp. (10kA, Curve-C)
2123	MCB Four Pole 40amp. (10kA, Curve-C)
2124	MCB Four Pole 50, 63amp. (10kA, Curve-C)
2125	RCCB\"s:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kAas per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2126	RCCB Double Pole 32/40amp., Sensitivity 100mA
2127	RCCB Double Pole 63amp., Sensitivity 100mA
2128	CABLES & SUBMAIN WIRING:
2129	XLPE INSULATED ARMOURED CABLES (ON SURFACE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
2130	Overall size 6sq.mm (4Core) Armoured (On-Surface)
2131	Overall size 10sq.mm (4Core) Armoured (On-Surface)
2132	Overall size 16sq.mm (4Core) Armoured (On-Surface)
2133	Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
2134	Aluminium thimble cable Core size 10 -16sq.mm
2135	Aluminium thimble cable Core size 25 -35sq.mm
2136	Aluminium thimble cable Core size 50sq.mm
2137	Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections
2138	Brass Gland for Aluminium cable 2/3/3½/4 Core size 25-35sq.mm
2139	Brass Gland for Aluminium cable 2/3/3½/4 Core size 50sq.mm
2140	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
2141	Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2142	Heavy gauge PVC conduit pipe 40mm dia. (Flushed)
2143	Heavy gauge PVC conduit pipe 50mm dia. (Flushed)
2144	CABLE TRAY:
2145	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
2146	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
2147	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
2148	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
2149	Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
2150	Double walled corrugated (DWC) HDPE pipe 90/76mm (outer/ inner dia.)
2151	Double walled corrugated (DWC) HDPE pipe160/136mm (outer/ inner dia.)
2152	EARTHING SYSTEM:
2153	G.I. EARTHING:Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).
2154	Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 8Metre in length)
2155	COPPER EARTHING (Upto 8 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc.,up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2156	Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
2157	COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
2158	Additional Length 20mm x 3mm thick Copper Tape
2159	G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc.
2160	Additional length G.I. rope 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (On Surface)
2161	LIGHT FIXTURES AND FANS:
2162	Supply and erection of Recessed mounted 36watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Philips RC380B LED36S-6500 G4 L60 W60 PSU OD WH OC, Crompton LCTLRNE-36-FO-CDL (2X2), Wipro CRCO10R038HP57GL1, Bajaj BZRSQL 36W GZi WH
2163	S/E of LED 24 watt recessed mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.LCDSPLN-R-18CDL, WIPRO Cat No. LD06-301-XXX-57-XX**, Bajaj Cat No-BZSLO NXT 24L LED NW SD
2164	SUPPLY AND ERECTION OF WIRING ACCESSORIES:
2165	Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
2166	Bakelite Batten Holder (Large size)
2167	Supply and erection of Ceiling Fan 1400mm (48\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS or equivalent.
2168	Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearinglonger life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make: Crompton EXHD300-6-1, Havells Turbo Force SP, Orient (Heavy Duty)
2169	TELEPHONE & EPABX SYSTEM:
2170	RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
2171	Wiring Telephone socket point RJ11 (one module)
2172	Supply & erection of20 Pair 0.5mm jelly filled Armored cable manufactured as per ITD specification with up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton, Finolex, RR kabel, Polycab, Shalimar.
2173	Supply and erection of 10 pairs MDF with krone modules & lockable box complete in all respect as desired by the engineer in charge at site. Make: Krone, M-Tel, Reliance, A-Tel, Airtele
2174	MUSEUM (ZONE-3) & ICONIC TOWER (ZONE-4):
2175	POINT & SUBMAIN WIRING:
2176	REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01)
2177	Wiring fan point with sheet metal fan box
2178	Wiring light point
2179	Wiring 3 pin 6 Amp. wall socket point
2180	Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
2181	Wiring 3 pin 16/20 amp. power plug control point
2182	COPPER WIRES & CONDUIT PIPE:
2183	PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
2184	Overall size 1sq.mm (Un-sheathed)
2185	Overall size 4sq.mm (Un-sheathed)
2186	Overall size 6sq.mm (Un-sheathed)
2187	Overall size 10sq.mm (Un-sheathed)
2188	Overall size 16sq.mm (Un-sheathed)
2189	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2190	Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)
2191	Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
2192	Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
2193	Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
2194	Heavy Gauge PVC Conduit Pipe 50mm dia. (Flushed)
2195	Heavy Gauge PVC Conduit Pipe 20mm dia. (On-surface)
2196	Heavy Gauge PVC Conduit Pipe 25mm dia. (On-surface)
2197	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
2198	PVC flexible pipe 40mm dia.
2199	Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
2200	PVC compression Socket gland 40mm dia.
2201	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Casing \"n\" Capping (Double Lock) ISI markedfor wiring purposes including cost of bends (L), (U), (T) & inspection boxes etc., where necessary including other petty material:-
2202	PVC Casing \"n\" Capping Size 20mm x 12mm
2203	PVC Casing \"n\" Capping Size 25mm x 16mm
2204	SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-
2205	Powder Coated Concealed Metal Box with Brass Lugs One/Two Module
2206	Powder Coated Concealed Metal Box with Brass Lugs Three Module
2207	Powder Coated Concealed Metal Box with Brass Lugs four Module
2208	Powder Coated Concealed Metal Box with Brass Lugs Six Module
2209	Powder Coated Concealed Metal Box with Brass Lugs Eight Module
2210	Powder Coated Concealed Metal Box with Brass Lugs Twelve Module
2211	HEAVY GUAGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
2212	Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
2213	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
2214	AC Plug and Socket TP&N with provision of One Triple Pole MCB 20amp.
2215	MAIN /SUB DISTRIBUTION BOARDS & DISTRIBUTION BOARDS:
2216	ZONE- 3 &4
2217	LT PANELS & MCCB\"s (MOULDED CASE CIRCUIT BREAKERS):Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
2218	Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB\"s. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of MCCB\"s to be installed in the cubical panel Enclosure (Excluding the cost of MCCB\"s) as per following:-
2219	EMDB-MUSEUM (ZONE-3 + ZONE-4):
2220	LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 10Nos. outgoing MCCB\"s40amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1800 x 400mm)
2221	ESDB- COOLLONADE & MDB-MUSEUM (ZONE-3 + ZONE-4):
2222	LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB\"s40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)
2223	SDB-MUSEUM, SDB-ZONE-4 (TOWER) & SDB- COOLLONADE:
2224	LT Panel enclosure having space for 1No. Incomer MCCB 160Amp. and 4Nos. outgoing MCCB\"s40amp. to 100amp. according to the requirement at site (Approx. size 1825 x 900 x 300mm)
2225	MCCB\"s (MOULDED CASE CIRCUIT BREAKER):Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevantPWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc.
2226	MCCB Four Pole 250amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
2227	MCCB Four Pole 160amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2228	MCCB Four Pole 100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2229	MCCB Four Pole 63amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2230	MCCB Four Pole 40amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2231	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s: Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB\"s as incomer and outgoings SP/TPminiature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
2232	SDB- PRESSURIZATION:
2233	TP&NDouble Door Vertical DB\"s 4 way each (With provision of FP MCCB upto 125amp)
2234	ESDB-MUSEUM & ESDB- ZONE-4 (TOWER):
2235	TP&NDouble Door Vertical DB\"s 8 way each (With provision of FP MCCB 160amp.)
2236	Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
2237	MCCB Four Pole 63/80/100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2238	MCCB Four Pole 160amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2239	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2240	MCB Triple Pole 40amp. (10kA, Curve-C)
2241	MCB Triple Pole 50, 63amp. (10kA, Curve-C)
2242	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
2243	TP&N Vertical Double Door Distribution Board 8 way each.
2244	TP&NVertical Double Door Distribution Board 12 way each
2245	Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
2246	Cable End Box for TPN Vertical 4/8/12Way
2247	MCB\"S & MCB DISTRIBUTION BOARDS:
2248	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2249	MCB Single Pole 6-32amp. (10kA, Curve-C)
2250	MCB Four Pole 40amp. (10kA, Curve-C)
2251	RCCB\"s:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kAas per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2252	RCCB Double Pole 32/40amp., Sensitivity 100mA
2253	CABLES & SUBMAIN WIRING:
2254	XLPE INSULATED ARMOURED CABLES (ON SURFACE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
2255	Overall size 10sq.mm (4Core) Armoured (On-Surface)
2256	Overall size 16sq.mm (4Core) Armoured (On-Surface)
2257	Overall size 95sq.mm (3½ Core) Armoured (On-Surface)
2258	Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
2259	Aluminium thimble cable Core size 10 -16sq.mm
2260	Aluminium thimble cable Core size 50sq.mm
2261	Aluminium thimble cable Core size 95sq.mm
2262	Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections
2263	Brass Gland for Aluminium cable 2/3/3½/4 Core size 10sq.mm
2264	Brass Gland for Aluminium cable 2/3/3½/4 Core size 16sq.mm
2265	Brass Gland for Aluminium cable 2/3/3½/4 Core size 95-120sq.mm
2266	CABLE TRAY:
2267	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
2268	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
2269	COPPER EARTHING (Upto 8 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc.,up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2270	Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
2271	COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
2272	Additional Length 20mm x 3mm thick Copper Tape
2273	LIGHT FIXTURES AND FANS:
2274	Supply and erection of LED batten 20watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Philips BN02IC LED20S PSU CW GRS2, Havell\"s ENDURALINEARNEOBS20WLED865SPCWH,Crompton CCS-103-20-65-SL-DP-NWH, Wipro LL20-281-XXX-65 ALI, Panasonic PBTM08208, Bajaj BCLAB 20W WH LED P
2275	S/E of LED 18 watt surface mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.LCDSPLN-R-18CDL, WIPRO Cat No. LD80-171-XXX-60-SM, Bajaj Cat No-BZSLOS NXT 18L LED WH SD
2276	S/E ofSurface LED1\"x4\" 31-40Watt Panel Ceiling light with high performance, commercial grade full diffuser providing uniform light with efficacy of LED fixture 100 lumens per watt (Minimum) and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % including erection, connections (With PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete) & testing etc complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Crompton Cat No. LCTLSNE-40-TL(1x4) Model SPAN/ WIPRO - Cat No. CRCO13S038HP57G1 Model Aura Plus/ Bajaj Cat No-BZSSLL36W LED WH Model-SKYLUX LED or its equivalent cat. and model of approved make.
2277	Supply and erection of LED batten 10watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Wipro Cat. No.LL20-111-XXX-65NE3, Bajaj Cat No.BCLSB10NW, Crompton Cat. No.CCS-103-10-65-SL-DP-NWH
2278	S/E of LED 12 watt recessed mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.CDR-205-12-57-SL-NWH, WIPRO Cat No. LD90-141-XXX-65-XX, Bajaj Cat No-BZSLO NXT 12L LED WH SD
2279	Supply and erection ofLEDBulk Head 9/10 wattIP65 surface mounted, pressure die cast housing complete in all respects as approved. and desired by the Engineer in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATBP/20/GL Dated 30/11/2017Make:-CROMPTON Cat No. LBHE10CDL, Philips Cat. No.WT202W LED6S NW PSU S2 PC,WIPPRO Cat. No. LW07-141-XXX-57-XX, Bajaj Cat. No. BIBWP 10W LED.
2280	S/E of 1x10 watt wall mounted LED fixture complete with lamp, ballast and all accessories as required with complete satisfaction of Engineer-in-charge Make: PHILIPS, Cat. No.(DUO-1, Model No.58152) or equivalent.
2281	S/E ofSurface LED1\"x4\" 31-40Watt Panel Ceiling light with high performance, commercial grade full diffuser providing uniform light with efficacy of LED fixture 100 lumens per watt (Minimum) and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % including erection, connections (With PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete) & testing etc complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Crompton Cat No. LCTLSNE-40-TL(1x4) Model SPAN/ WIPRO - Cat No. CRCO13S038HP57G1 Model Aura Plus/ Bajaj Cat No-BZSSLL36W LED WH Model-SKYLUX LED or its equivalent cat. and model of approved make.
2282	S/E of surface mounted30-35W LED spot light fixture complete with all accessories as requried at site. Make: Crompton Cat. No.CDS-200-30-40-SL-NWH, Wipro Cat. No.LD30-301-36W-40-PL, Havell\"s Cat. No.CYLINDROPROSURFDLS35WLED840S45DWHT
2283	S/E of 1 Metre of Track light system of 3 wire move up of CRCA, powder coated complete with end caps and suspention sytem as required at site. Make: Havell\"s Cat. No.1MTR3PHASETRACKTSWHT, WIPRO Cat. No.XTS5100 or its equivalent
2284	S/E of 2 Metre of Track light system of 3 wire move up of CRCA, powder coated complete with end caps and suspention sytem as required at site. Make: Havell\"s Cat. No.2MTR3PHASETRACKTSWHT, WIPRO Cat. No.XTS5200 or its equivalent
2285	S/E of Track mounted 35-41W Spot light fixture complete with lamp, ballast and all accessories as required at site. Make: WIPRO Cat. No. LD57-501-024-40-XX, Havell\"s Cat. No. CYLINDROTS35WLED80S3WIRE38DWHT or its equivalent
2286	S/E of M S powder coated & glass finsihed 5 x 9 W Surface mounted cluster light fixture with 9W LED Lamp and all accessories as required with complete satisfaction of Engineer-in-charge.Decon Cata. Ref. 03RN. or its equivalent
2287	SUPPLY AND ERECTION OF WIRING ACCESSORIES:
2288	Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
2289	Bakelite Batten Holder (Large size)
2290	Supply and erection of Ceiling Fan 1200mm (48\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS or equivalent.
2291	Supply and erection of Ceiling Fan 1400mm (48\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS or equivalent.
2292	TELEPHONE & EPABX SYSTEM:
2293	RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
2294	Wiring Telephone socket point RJ11 (one module)
2295	Supply & erection of20 Pair 0.5mm jelly filled Armored cable manufactured as per ITD specification with up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton, Finolex, RR kabel, Polycab, Shalimar.
2296	Supply and erection of 10 pairs MDF with krone modules & lockable box complete in all respect as desired by the engineer in charge at site. Make: Krone, M-Tel, Reliance, A-Tel, Airtele
2297	SARAI BUILDING (ZONE-5) GROUND FLOOR:
2298	POINT & SUBMAIN WIRING:
2299	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
2300	Wiring fan point with sheet metal fan box
2301	Wiring light point
2302	Wiring call-bell point
2303	Wiring 3 pin 6 Amp. wall socket point
2304	Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
2305	Wiring 3 pin 16/20 amp. power plug control point
2306	COPPER WIRES & CONDUIT PIPE:
2307	PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
2308	Overall size 1sq.mm (Un-sheathed)
2309	Overall size 1.5sq.mm (Un-sheathed)
2310	Overall size 2.5sq.mm (Un-sheathed)
2311	Overall size 4sq.mm (Un-sheathed)
2312	Overall size 6sq.mm (Un-sheathed)
2313	Overall size 10sq.mm (Un-sheathed)
2314	Overall size 16sq.mm (Un-sheathed)
2315	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2316	Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)
2317	Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
2318	Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
2319	Heavy Gauge PVC Conduit Pipe 20mm dia. (On-surface)
2320	Heavy Gauge PVC Conduit Pipe 25mm dia. (On-surface)
2321	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
2322	PVC flexible pipe 40mm dia.
2323	Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
2324	PVC compression Socket gland 40mm dia.
2325	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Casing \"n\" Capping (Double Lock) ISI markedfor wiring purposes including cost of bends (L), (U), (T) & inspection boxes etc., where necessary including other petty material:-
2326	PVC Casing \"n\" Capping Size 20mm x 12mm
2327	PVC Casing \"n\" Capping Size 25mm x 16mm
2328	SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-
2329	Powder Coated Concealed Metal Box with Brass Lugs One/Two Module
2330	Powder Coated Concealed Metal Box with Brass Lugs Three Module
2331	Powder Coated Concealed Metal Box with Brass Lugs four Module
2332	Powder Coated Concealed Metal Box with Brass Lugs Six Module
2333	Powder Coated Concealed Metal Box with Brass Lugs Eight Module
2334	Powder Coated Concealed Metal Box with Brass Lugs Twelve Module
2335	HEAVY GUAGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
2336	Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
2337	MAIN /SUB DISTRIBUTION BOARDS & DISTRIBUTION BOARDS:
2338	ZONE- 5
2339	LT PANELS & MCCB\"s (MOULDED CASE CIRCUIT BREAKERS):Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
2340	Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB\"s. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of MCCB\"s to be installed in the cubical panel Enclosure (Excluding the cost of MCCB\"s) as per following:-
2341	MDB- SARAI BUILDING:
2342	LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 10Nos. outgoing MCCB\"s40amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1800 x 400mm)
2343	MCCB\"s (MOULDED CASE CIRCUIT BREAKER):Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevantPWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc.
2344	MCCB Four Pole 400amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
2345	MCCB Four Pole 100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2346	MCCB Four Pole 63amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2347	MCCB Four Pole 40amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2348	EMDB- SARAI BUILDING:
2349	Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacture should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP44).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS:8623. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. The base channel will be made out of 75mm x 40mm x 5mm rolled channel. \"The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc.
2350	Painting:The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work. Busbars: The panel shall be provided with TPN copper busbar of suitable size according to the size of MCCB\"s.All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard). The Concerned contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of ACB/MCCB\"s to be installed in the cubical panel Enclosure (including the cost of MCCB\"s+E.R.H.) as per following.
2351	Incomer:¦ MCCB 400A, 415V breaking capacity =36kA 4P microprocessor based adjustable thermal and magnetic protection= 1No.Outgoings: ¦ MCCB 250A, 415V breaking capacity =36kA 4P microprocessor based adjustable thermal and magnetic protection= 3Nos.¦ MCCB 200A, 415V breaking capacity =36kA 4P microprocessor based adjustable thermal and magnetic protection= 4Nos.¦ MCCB 100amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 3Nos.¦ MCCB 40amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 9Nos.¦All Incomers & Out going With Extendable Rotary Handle with adjustable depth complete as per schematic diagram attached & Satisfaction of the Engineer in charge at site.Enclosure:Panel Size: As per NormsPanel builders Make: Kalyani Switchgear, ETE Electrogears, Power Associates, Unix, CMKL
2352	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
2353	TP&N Vertical Double Door Distribution Board 8 way each.
2354	Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
2355	Cable End Box for TPN Vertical 4/8/12Way
2356	MCB\"S & MCB DISTRIBUTION BOARDS:
2357	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2358	MCB Single Pole 6-32amp. (10kA, Curve-C)
2359	MCB Four Pole 40amp. (10kA, Curve-C)
2360	RCCB\"s:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kAas per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2361	RCCB Double Pole 32/40amp., Sensitivity 100mA
2362	CABLES & SUBMAIN WIRING:
2363	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2364	Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
2365	Heavy Gauge PVC Conduit Pipe 50mm dia. (Flushed)
2366	CABLE TRAY:
2367	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
2368	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
2369	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
2370	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
2371	Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
2372	Double walled corrugated (DWC) HDPE pipe 90/76mm (outer/ inner dia.)
2373	Double walled corrugated (DWC) HDPE pipe160/136mm (outer/ inner dia.)
2374	EARTHING SYSTEM:
2375	G.I. EARTHING:Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).
2376	Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 8Metre in length)
2377	COPPER EARTHING (Upto 8 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc.,up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2378	Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
2379	COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
2380	Additional Length 20mm x 3mm thick Copper Tape
2381	G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc.
2382	Additional length G.I. rope 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (On Surface)
2383	LIGHT FIXTURES AND FANS:
2384	Supply and erection of LED batten 20watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Philips BN02IC LED20S PSU CW GRS2, Havell\"s ENDURALINEARNEOBS20WLED865SPCWH,Crompton CCS-103-20-65-SL-DP-NWH, Wipro LL20-281-XXX-65 ALI, Panasonic PBTM08208, Bajaj BCLAB 20W WH LED P
2385	S/E of LED 18 watt surface mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.LCDSPLN-R-18CDL, WIPRO Cat No. LD80-171-XXX-60-SM, Bajaj Cat No-BZSLOS NXT 18L LED WH SD
2386	S/E ofSurface LED1\"x4\" 31-40Watt Panel Ceiling light with high performance, commercial grade full diffuser providing uniform light with efficacy of LED fixture 100 lumens per watt (Minimum) and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % including erection, connections (With PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete) & testing etc complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Crompton Cat No. LCTLSNE-40-TL(1x4) Model SPAN/ WIPRO - Cat No. CRCO13S038HP57G1 Model Aura Plus/ Bajaj Cat No-BZSSLL36W LED WH Model-SKYLUX LED or its equivalent cat. and model of approved make.
2387	Supply and erection of LED batten 10watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Wipro Cat. No.LL20-111-XXX-65NE3, Bajaj Cat No.BCLSB10NW, Crompton Cat. No.CCS-103-10-65-SL-DP-NWH
2388	S/E of LED 12 watt recessed mounted downlighter (including LED driver) with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Crompton Cat No.CDR-205-12-57-SL-NWH, WIPRO Cat No. LD90-141-XXX-65-XX, Bajaj Cat No-BZSLO NXT 12L LED WH SD
2389	Supply and erection ofLEDBulk Head 9/10 wattIP65 surface mounted, pressure die cast housing complete in all respects as approved. and desired by the Engineer in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATBP/20/GL Dated 30/11/2017Make:-CROMPTON Cat No. LBHE10CDL, Philips Cat. No.WT202W LED6S NW PSU S2 PC,WIPRO Cat. No. LW07-141-XXX-57-XX, Bajaj Cat. No. BIBWP 10W LED.
2390	Supply and erection of Surface mounted 36watt LED panel(including LED driver) with CRCA sheet having efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.Make:-Philips SM366C LED32-6500 PSU OD WH, CROMPTON Cat. No.LCTLSNE-36-FO-CDL (2X2), WIPRO Cat. No. CRCO10S038HP57GL1
2391	SUPPLY AND ERECTION OF WIRING ACCESSORIES:
2392	Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
2393	Bakelite Batten Holder (Large size)
2394	Supply and erection of Ceiling Fan 900mm (36\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS
2395	Supply and erection of Ceiling Fan 1200mm (48\") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High SpeedOpel White, Orient- New Breeze, Havell\"s Velocity HS or equivalent.
2396	Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearinglonger life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make: Crompton EXHD300-6-1, Havells Turbo Force SP, Orient (Heavy Duty)
2397	TELEPHONE & EPABX SYSTEM:
2398	RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
2399	Wiring Telephone socket point RJ11 (one module)
2400	Supply & erection of20 Pair 0.5mm jelly filled Armored cable manufactured as per ITD specification with up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton, Finolex, RR kabel, Polycab, Shalimar.
2401	Supply and erection of 30 pairs MDF with krone modules & lockable box complete in all respect as desired by the engineer in charge at site. Make: Krone, M-Tel, Reliance, A-Tel, Airtele
2402	PROVIDING ADDRESSABLE FIRE DETECTION & FIRE ALARM SYSTEM:
2403	FIRE PANELS & ANNUNCIATORS:
2404	Supply,installation, testing & Commissioning of Minimum 2 loopUpgradable to 10 loops Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition.Designed to meet UL864, 10th Edition & FM Approved complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Notifier by Honeywell, Bosch UL, Fire Finder by Siemens
2405	Supply,installation, testing & Commissioning of Minimum 1 loop Microprocessor based, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition.Designed to meet UL864, 10th Edition & FM Approved complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Notifier by Honeywell, Bosch UL, Fire Finder by Siemens
2406	Supply, Installation, Testing & Commissioning of Amplifier 500W, Rated power output (sin.) 2 x 250 W, Voltage consumption (230 V AC) 2.8 A, (24 V DC / Sinus continuous tone) 25 A, (24 V DC / Announcement / 1/3 load) 8.75 A (24 V DC / Announcement / 1/8 load) * 3.6 A, Power consumption in standby mode (230 V), separated f. mains supply A`pprox. 0 VA, Rated power output (sin.) 2 X 400 W Voltage consumption (230 V AC) 4.5 A, (24 V DC / Sinus continuous tone) 40.5 A (24 V DC / Announcement / 1/3 load) 13.9 A, (24 V DC / Announcement / 1/8 load) *5.6 A, Power consumption in standby mode (230 V), separated f. mains supply Approx. 0 VA, Nominal voltage 230 V AC, Nominal frequency 50 to 60 Hz, +10% / -5% Emergency power supply 24 V DC, Functional principle Class D, Transmission frequency band (-1 dB) 50 Hz to 22 kHz, Signal-to-noise ratio > 90 dB, A - unweighted Harmonic distortion at full load / 1 kHz < 0.03 %, Channel separation > 42 dB Input impedance 20 kO, el. balanced Specification 20 kO, el. balanced, Height, Width, Depth: 88mm, 402 mm / 2 HU, 19”mm, 483mm,Weight D250 approx. 16.5 kg, D400 approx. 19 kg. Makes : Honeywell, Johnson Control ( ifc series)
2407	Supply, Installing, testing and commissioning of same OEM make Cloud based service through universal gateway, which shall be enabled through internet. Remote health monitoring solution shall utilize cloud based software-as-a-service web application & supplementary network gateway hardware for all panels. System shall provide secure web access to cloud based web application using any of the web browsers like Google Chrome (preferable), Internet Explorer etc. from any computer/ tablet/ smartphone connected over internet via defined credentials – username and password. It shall also have the facility to monitor the cloud service over the mobile apps. The cloud based web application shall capture all fire alarm system data points as received from the system via supplementary gateway hardware of the same make as Fire Alarm Panel. The software shall display real time view of fire system effectiveness, multi-location unified view, custom dashboard, device level information, scheduled reporting, e-mail of critical alarms. The cloud service shall be capable of monitoring 250000 datapoints scattered accross multiple install bases spread accross multiple geographical locations. Make: Notifier by Honeywell, Bosch UL, Johnson Control ( IFC Series)
2408	DETECTORS:
2409	Supply, installation, testing & Commissioning of Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photo electric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Notifier by Honeywell ( FSP/951T+B501/White),Fire Finder by Siemens,Bosch UL
2410	Supply,installation ,testing & Commissioning of Reponse Indicator for up side of ceiling complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Notifier by Honeywell ( FSP/951T+B501/White),Fire Finder by Siemens,Bosch UL
2411	Supply,installation ,testing & Commissioning of Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches including cost of petty material required to complete the work complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Notifier by Honeywell (FST/951R+B501/White),Fire Finder by Siemens,Bosch UL
2412	Supply,installation ,testing & Commissioning of Addressable Duct Smoke Detector. The duct detector shall have an air velocity rating from 100 to 4000 ft/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches including cost of petty material required to complete the work complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Notifier by Honeywell (DNR+FSP/951+DST1.5),Fire Finder by Siemens,Bosch UL
2413	Supply, installation, testing & Commissioning of Addressable High Sensitivity early warning Photo Detector with sensitivity level of 0.02% to 2% Obs/Feet. The detector shall have the optic block to amplify signals from smoke, but diminish stray internal reflections that can cause false alarms. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition.Make: Notifier by Honeywell / XLS 3000 / Bosch UL/ Johnson Control ( IFC Series) complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Notifier by Honeywell, Vighanharta,Fire Finder by Siemens,Bosch UL
2414	MODULES:
2415	Supply, erection, testing & commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device including cost of petty material required to complete the work complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Notifier by Honeywell (F/MCP/GLASS), Fire Finder by Siemens,Bosch UL
2416	Supply, installation, testing & Commissioning of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes/ Telephone Jack. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Notifier by Honeywell FCM/1,Fire Finder by Siemens,Bosch UL
2417	Supply, installation, testing & Commissioning of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete in all respects as approved and desired by the Engineer-in-charge at site. Make:Honeywell FRM/1,Fire Finder by Siemens,Bosch UL
2418	Supply, installation, testing & Commissioning of Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Honeywell FMM/1, Fire Finder by Siemens,Bosch UL
2419	Supply, installation, testing and commissioning Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Notifier by Honeywell ISO/X,Fire Finder by Siemens,Bosch UL
2420	NOTIFICATION DEVICES:
2421	Supply, installation, testing & Commissioning of Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication UL Listed complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Notifier by Honeywell SYS/HS, Fire Finder by Siemens,Bosch UL
2422	PUBLIC ADDRESS DEVICES:
2423	Supplying, installing, testing and commissioning of Box Speaker wall mounted, Rated power 6 W, 100 V line transformer, Technical Specification,Transformer power 3W -6W, Sensitivity 88 dB, SPL 1m/6 W 96 dB, Frequency response (-10 dB) 110 Hz ~13K Hz, Dimensions 260 x 180 x 120 mm, Weight 1.08 Kg, Material ABS, Color RAL 9003. Make:Honeywell, Bosch Praesideo, Johnson Control ( IFC Series)
2424	Supply, erection, testing & commissioning of 1KVA onlinesine wave UPS/ Power plant with in built SMF batteries having 30 minutes backup time complete in all respects as approved and desired by the Engineer-in-charge at site. Make: APC, Numeric, Uniline, Eaton, Aqua Power.
2425	CONDUIT & CABLES:
2426	Supply, installation, testing & Commissioning of fire resistance cable (Colour Red) (at 950° C for 180 minutes) of BS6387/BS7846 Fire Proof Cable, 2C X 1.5 sqmm, BS6387 & BS7846, annealed stranded copper conductor, mica fire resistant tape, XLPE insulated, low smoke & zero halogen (LSZH) bedding, galvanized steel wire armour, low smoke & zero halogen (LSZH) red outer sheath. 600/1000 volts. Fire resistant to IEC 331 & BS7846 F2/BS6387 & CWZ. Acid gas emission to BS EN 50267 (IEC60754), smoke emission to BS EN 50268 (IEC61034) and flame propagation to BS EN 50265, BS EN 50266 (IEC 60332-3) complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton, Havell\"s, Rallison, Fusion, Polymair
2427	HEAVY GUAGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
2428	Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) Flushed
2429	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2430	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
2431	PVC CHANNEL (uPVC TRUNKING):Supply and erection ofPVC Channel (uPVC Trunking) with cover of various sizes (On Surface) on wall, Flat angle, internal & external angle, Flat Tee, End cap and mounting boxes including the cost of joint cover, fixing and other petty material etc.:-
2432	PVC Channel (uPVC Trunking) 50mm x 50mm
2433	End Cap50mm x 50mm
2434	PROVIDING CCTV ALONG WITH ALLIED ACCESSORIES:
2435	SITC of IP indoor Camera1/2.8\" SONY Starvis Back-illuminated CMOS Sensor 2 MP ,2.7-13.5mm Motor Zoom Auto Focus Lens ,AF,WDR; Super Starlight With Internal POE Main Stream: 1080P@30fps, 3M@15fps; 3MP HD Lens, With IR-CUT 2.7-13.5mm Motor Zoom Auto Focus Lens HDR, Defog, Flicker Control,2D DNR,3D DNR,Back Light control, Motion Deduction, Privacy Masking 3 Rectangular Zone, CompressionH.264/H.264+/ H.265/ H.265+/ JPEG/ AVI / MJPEG, Electronic Shutter Time Auto: PAL 1/25-1/10000Sec; NTSC 1/25-1/10000 Sec, Protocol:TCP/IP, ICMP, HTTP, HTTPS,FTP, DHCP , DNS, DDNS, RTP, RTSP,RTCP,NTP, SMTP, ONVIF 2.4, Camera makes Sony / Mobiteh, Mountxross, Bosch, Axis/Pelco should be compatable with same make of NVR. IE Brower IE8-11, Google Chrome, Firefox, Safari, Mac Safari, Smart PhoneiPhone, iPad, Android, Android Pad, Image ConfigSaturation/ Brightness/ Contrast /Sharpness, Mirror, 3D NR , White Balance, FLK(Flicker Control)Main Stream: 1080P/720P@30fps; 3MP HD Lens, With IR-CUT/(H.264/H.265) , IR range: 30M , Recording Mode NVR/NAS/CMS/Web completeApproved Make : Sony, Mobiteh, Bosch, Axis, Pelco
2436	SITC of 5MP Face Detection IP Network CameraOutdoor IP66 5X AF IR 60m, Face Detection and Recognition(max support 5000 faces) detection distance 12M, • 1/2.8\"SONY Starvis Back-illuminated CMOS sensor • H.264 /H.264 +/H.265 /H.265+ Compression Method • Lens: 2.7-13.5 [email protected] Motorized, Autofocus; 5MP HD Lens • IR Distance 40m Max.S/N Ratio=52dB,• IP66 Outdoor Metal Case,Infrared LED42µ x 4PCS,Infrared Distance 40M, Minimun Illumination 0.01Lux,ProtocolTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, SMTP, ONVIF 2.4,Camera makes Sony / Mobiteh, Mountxross, Bosch, Axis/Pelco should be compatable with same make of NVR .Intelligent AnalysisIntrusion Detetion, Line Cross Detetion, Loiter Detetion, People Gather Detecion,DefogMode, ROI, BLC, Motion Detection, PrivacyMasking3 Rectangular Zone, Operation Temperature-20? ~ +60? RH95% Max Make : Sony, Mobiteh,Bosch, Axis, Pelco
2437	SITC of 5 MP IP PTZ camera 1/2.8\" SONY Starvis Back-illuminated CMOS Sensor Horizontal Resolution5MP, Compression H.264/H265, S/N Ratio>50db, PTZHorizontal Rotation Speed 45°/S, Horizontal Rotation Range 0°~360°, Tilt Rotation Speed 30°/s, Tilt Rotation Range 0°~93°, Preset Points 220, Guard Tours3 groups, Guard PointsMax.16 points, Lens, Focus Length3.9mm-85.5mm, Focus Control22X Optical Zoom, Night Vision, Infrared LED?42x6PCS, IR Range120m, Day-night modeAUTO, Smart image control, Licence reading plate mode, faceless explosure mode, WDR BLC, flicker control, privacy zone, motion detection, face detection,Network, Network protocolTCP/IP, HTTP, FTP, RTSP, UPnP, DNS, NTP, RTP, UDP, IGMP,P2P, ONVIFSupport, Network interfaceBuilt-in RJ45 network interface,support 10M/100M IP DATA, Main Stream125601920@20fps, Main Stream225601440@25fps, Main Stream323041296@25fps, Main Stream419201080@25fps, Main Stream51280720@25fps, Main Stream6640512@25fps, Sub Stream1800448@25fps, Sub Stream2704576@25fps, Sub Stream3640360@25fps, Sub Stream4352288@25fps, Alarm/, SD Card Slot/, WeatherproofIP66, Operating TemperatureIndoor: 0°~ +40° Outdoor:-40°~ +60°, Operating Humidity =90% Non Condensing, PowerDC12V 2A/3A, Lightning ProtectionTransient voltage 6000V. Approved Make : Sony, Mobiteh,Bosch, Axis, Pelco
2438	GI PIPE POLES: (FOR INSTALLATION OF PTZ CAMERAS)Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/Lwith 1:2:4 cement concrete including painting of pole with two coats of approved aluminiumpaint as required:-
2439	G.I. Pipe Pole 6.1 metre Long, Dia. 100mm, Planting Depth 120cm with Pit Depth 135cm.
2440	SITC of PoE Spliliter12 v 1 Amp, IP66 For High Voltage Protection complete in all respects as approved and desired by the Engineer in-charge at site. Make : Honeywell,Mountxross, Bosch, Axis/Pelco
2441	SITC of Power supply 12Volt 3 amp for PTZ complete in all respects as approved and desired by the Engineer in-charge at site.Make : Honeywell, Bosch, Axis/Pelco
2442	SITC of 64CH NVR with(4096×2160, 2592x1944, 2048x1536, 1920×1080, 1280×960, 1280×720, etc),1 VGA, 2 HDMI, Input1 Port RCA,Audio Bit Rate64kbps,Audio Compression standardG.711,Sensor Input-16,NVR should support Output Intelligent AnalysisIntrusion Detetion, Line Cross Detetion, Loiter Detetion, People Gather Detecion,DefogMode, ROI, BLC, Motion Detection, PrivacyMasking3 Rectangular Zone4, Motion Detection 64 Channel, MD Zones: 396 (22 × 18),Trigger EventsRecording, Email, FTP, Snapshot, Buzzer and Screen Tips, alarm output,HDMI14K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, HDMI21920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz ,VGA1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz,Display Split 4CHxD1/ 36CHxD1/ 25CHxD1/ 16CHxD1/ 9CHxD1/4CHxD1/1CHx1080P/ 1CHx3MP/ 1CHx4MP/1CHx5MP/1CHx4k,Digital ZoomYES,OSDCamera Title, Time, Recording, Motion Detection,Video CompressionH.264/H.265, Resolution 4k(4096×2160), 5MP(2592×1944), 4MP(2688×1520), 3MP(2048×1536), 1080P(1920×1080), 960P(1280x960), 720P(1280×720), D1 (720×576/720×480) RecordRatePAL:4k@ 30×25fp,5MP @ 50×25fp, 4MP@64x25fp, 3MP @ 64×25 fp, 1080P@64×25fp, 960P@64×25fp,720P@64×25fp, D1@64×25fp NTSC:4k @30×30fp, 5MP@ 50×30fp,4MP@64×30fp,3MP@64×30fp,1080P@64×30fp, 960P@64×30fp, 720P@ 64×30fp, D1@ 64×30 fp Record ModeManual\Timer\Motion Detection,Local Sync Playback4CH 4K@30fps, 6CH 5MP@ 30fps, 8CH 4MP@30fps, 10CH 3M@30fps, 16CH 1080P@30fps, 16CH 960P@30fps, 16CHP@ 30fps, Decode Capability4CH 4K(3840×2160)@30fps, NVR Make :Sony/Mobiteh,Mountxross, Bosch, Axis/Pelcoshould support IP camera Make Sony/Mobiteh,Mountxross, Bosch, Axis/Pelco. Remote Sync Playback Search ModeALL, Channel, Manual, Time, Date, Motion Detection,,Playback FunctionsPlay, Pause, Stop,Fast Play, Digital Zoom Backup ModeUSB Device/Network,Interface2 RJ-45 10/100/1000Mbps self-adaptive Ethernet interfaces Incoming Bandwidth300MB,Network FunctionsTCP/CP, HTTP, UPnP, DNS, NTP, SMTP, PPPoE, DHCP, FTP, DDNS, RTP, RTSP, RTCP Make Sony, Mobiteh, Bosch, Axis, Pelco
2443	SITC of Display Information sytem working on LAN ,55\" 4K , UHD, Digital Signage,4000;1DVI-D,DP1.2,HDMIX2, HDCP2.2, Stereo mini Jack,USBX2, RS232C(in/out),RJ45, 300NITS, MagicInfo Premium software, Multi Display Control Software, WI-FI,Auto Source recovery & switching, 8Gb with StandMemory. Make Samsung, Sony, LG, Toshiba, Hitachi
2444	SITC of L2+ Managed Industrial Grade POE Switch 12 Ports Gigabit Managed Industrial Grade POE Switch , 8 10/100/1000 Base- TX portand 2 Gigabit SFP slotand 1console port Network Protocols: Support , IEEE802.3, IEEE802.3u, IEEE802.3z , IEEE802.3ab , IEEE802.3x , IEEE802.1d , IEEE802.1w , support IP camera All Make. Netgear, Cisco. Mountxross, D link,should Working temperature:-40~75? Storage temperature:-40~85?, Relative Humidity : 5%~95% (no condensation), Shell : IP30 protectgrade, metal shell Installation : DIN- Railor Wallmounts, MTBF : 300,000 hours , Support L2+ Switching features including 802.1Q VLAN, Mirroring, Portisolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACL setc. Support spanning tree STP(802.1D) and RSTP(802.1W).802.1s(MSTP) way exchange time< 50ms Jumbo frames support upto 9.6 Kkilobytes Support enhanced managemen through WEB,CLI, TELNET, SSH, SNMP Ethernet portsupport 10/100/1000 Mself-adaption.Bandwidth: 24Gbps, Packet Buffer Memory: 4M Packet Forwarding Rate:1488000 pps /port Address Table : 8K. Make: Netgear, Cisco, Mountxross, Allied telesis
2445	SITC of 24 port POE switch IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation,24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10GSFP+,Full/half duplex for 10/100 Mbps and Gigabit speed,Auto or configurable MDI/MDIX,Switching Capacity 92 Gbps,Transmission Method Store-and-forward,MAC Address Table 16,000 entries per device,Maximum 64 bytes PacketForwarding Rate 68.45 Mpps,PoE Standard IEEE 802.3af, 802.3at,Ports 1 to 24: Up to 30 W,PoE Power Budget Max. 193 W,Heat Dissipation 813.967 BTU/hr,Diagnostic LEDs Power/Stacking ID/Fan (per device), Link/Activity/Speed (per 10/100/1000 Mbps port), Link/ Activity/Speed (per Gigabit SFP port), Link/Activity/Speed (per 10G SFP+ port),L3 Features ARP• 256 Static ARP• Supports Gratuitous ARP• IPv6 Neighbour Discovery (ND)• Default Routing• Static Routing• 64 IPv4 Static Route Entries• 32 IPv6 Static Route Entries,• CLI• Telnet Server• TFTP Client• IPv6 Neighbor Discovery• Configurable MDI/MDIX• SNMP• Supports v1, v2c, v3• SNMP Trap• System Log• Max. 10,000 log entries• DHCP Client• D-Link Network Assistant support• SNTP• ICMPv6• IPv4/v6 Dual Stack• DHCP Auto Configuration• RMON v1 complete in all respects as approved and desired by the Engineer in-charge at site. Make Netgear, D-link
2446	SITC of 20 SFP ports• 4 Combo 10/100/1000BASE-T/SFP ports • 4 10 GbE SFP+ ports,Console Port • RJ45 and Mini USB console ports for out-of-band CLI management,Management Port • 10/100/1000BASE-T RJ-45 Ethernet for out-of-band IP management,• 1 RJ-45 port,1 USB 2.0 Type A port,Switching Capacity • 128 Gbps,Packet Forwarding Rate • 95.24 Mpps,Packet Buffer • 4 MBytes,MAC Address Table • 68K entries2,IPv4 Routing Table • 16K entries,IPv6 Routing Table • 7K entries,IPv4 Forwarding Table • 32K entries2,IPv6 Forwarding Table • 16K entries2,Jumbo Frame Size • 12 KBytes. Make: Cisco, D-Link, Extreme, Netgear
2447	SITC of Wall Mount 9U Rack ,Front Glass Door (tinted,Toughened) with Lock & Key,2 pairs of 19\" Mounting Rails with U-Marking,Welded Side Walls With Metal Logo,1U Cable Manager (1), Hardware Packet (1 Pkt),6 Socket 5 Amp. Power Distribution Unit (1 No),Roof Mounted Fan Unit / 90 CFM /230V AC (1 No) complete in all respects as approved and desired by the Engineer in-charge at site Make: DLink, Netrack
2448	SITC ofOutdoor Waterproof Pole Mount 9U Rack ,Front Door with Lock & Key,2 pairs of 19\" Mounting Rails with U-Marking,Welded Side Walls With Metal Logo,1U Cable Manager (1), Hardware Packet (1 Pkt),6 Socket 5 Amp. Power Distribution Unit (1 No), complete in all respects as approved and desired by the Engineer in-charge at site Make DLink/Netrack
2449	SITC of 27U Network Enclosure Frame-600X800-STEEL with accessories like fan, pdu, cable manager etc. SITC of 27U Enclosure Frame-800X1000-STEEL, Caster Wheels Set of 4 (2 with Brakes & 2 without Brakes),Adjustable Levellers set of 4, Glass Door-800-27U, Metal Door-800-27U-Vented, Side Panels-1000-27U-Vented, Mounting Hardware-(Pack of 20), FHU with 4 FAN 360CFM, Vertical Power Distribution Unit with 12 x 5/15 sockets Round Pin, 230 Volts AC, 32 Amp with Plug, Vertical Cable Manager-27U-Loop, Horz. Cable Manager-1U-Loop, Conforms to DIN 41494 OR equivalent ISO Standards, Adjustable 19” equipment mounting verticals provide the better mounting flexibility maximizing the usable mounting space, Depth adjustable mounting slots, Top and bottom Panel with ventilation and cable entry facility, Provision to mount the cooling fans on the top panel, Powder coated finish with pretreatment process meeting all industry standards, Grounding and Bonding Options can be provided, 100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment, Conforms to DIN 41494 or equivalent standard, Welded Frame, Lockable Toughened Glass Door, Metal Vented Door Steel, DIN Standard 10mm Sq. Slots / Direct M6 Tap, 19” Mounting angles made of formed steel Powder Coated, Welded to Frame, Vented and Field Cable entry exit cut outs. Make: DLink, Netrack
2450	SITC of HDD Formatted capacity 6 TB,Data transfer rate (max) Buffer to host Host to/from drive (sustained) 6 Gb/s 171 MB/s,Cache (MB) 64,Rotational speed (RPM) IntelliPower ,Load/unload cycles4 300,000,Non-recoverable read errors per bits read <1 in 1014,Operating (2 ms, read/write) 30,Operating (2 ms, read)65, Non-operating (2 ms)250,Average power requirements (W) Read/Write 5.90,Idle 4.90,Standby and Sleep 0.40 complete in all respects as approved and desired by the Engineer in-charge at site. Make: WD, Toshiba
2451	SITC of Category 6 UTP, 4 Pair This cable well exceeds the requirements of TIA/EIA-568-C.2 and IEC/ISO 11801. Construction: 4 twisted pairs separated by cross separator, 4 channel, polymer spine / full separator. Half shall not be accepted. Cable should be Armoured. Operates at bandwidth of 250 MHz, Conductor Solid Bare Electronic Grade Copper. Inner jacket should be PVC and outer should be PE, suitable for direct burial. Insulation: Polyethylene, Attenuation (< 36 db/100m), Pair – to – pair and PS NEXT, ELFEXT and PSELFEXT, Return Loss, ACR and PS ACR., Nominal Outer Diameter of Cable should be 9.70 mm and Conductor Diameter 0.56 mm (23 AWG), Cable should support operating Temperature from -20° to +60°C, Cable should come with printed sequential Length Counter on each meter, Cable support Conductor Resistance 93.5 OHMS/1000MTR@20 Degree, Mutual Capacitance of cable should be < 5.6nF/100m, Max Resistance Unbalance of cable should be 5% Max, Capacitance Unbalance of cable should max 330pF/100m, Cable support Delay Skew: < 45nS, Operating Voltage: 72V and NVP: 69%, Shall Supports Gigabit Ethernet (1000 base-T) standard and Operates at bandwidth of 250MHz.complete in all respects as approved and desired by the Engineer in-charge at site. Make: D link, Molex
2452	Supply and laying of 6 Core Single Mode Optical Fiber Cable.The fiber type is a Matched Cladding Single Mode,Fiber dual coated with acrylate coating.The fiber is optimized for operation at 1310 nm and at 1550 nm.,Should fulfill the requirements of:IEC 793-2: 1992,EN 188101 andITU-T Recommendation G.652,Testing methods are in accordance with the following standards: ITU-T G.652.D, IEC 793-1 and Telecordia : GR-20 Core,ISO : 11801,Maximum induced permanent loss after 1000 h at 1 bar H2 at 70 °C and out gassing for 72 h at 70°C (valid both at 1310 nm and at 1550 nm): 0.2 dB/km .Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System.All OFC and Components should be from same OEM. Make: Systemax, AMP, D-Link, R&M
2453	Supply, Installation, Testing and Commissioning of12 Port Rack Mount LIU loaded.LIU 12 PORT Rack Mount - Loaded (SC) SM,FIBER PATCH PANELS – RACK MOUNT Have sufficient slots accommodate Simplex/duplex SC adapters individually.Aluminum base material for light mounting,Should have Splice Tray & Cable Spoolprovision inside,Accessory kit consists of cable ties, mounting ear screw earthling and spiral wrap tube.Can Include 12SC Terminations ,Removable Rubber grommet to allow for pre-terminated fiber trunk installation,protect cable and minimize dust build up,Should have cable ties,mounting ear screws and spiral wrap tube. Make: Systemax, AMP, D-Link, R&M
2454	Supply, Installation, Testing and Commissioning of24 Port Rack Mount LIU loaded.LIU 12 PORT Rack Mount - Loaded (SC) SM,FIBER PATCH PANELS – RACK MOUNT Have sufficient slots accommodate Simplex/duplex SC adapters individually.Aluminum base material for light mounting,Should have Splice Tray & Cable Spoolprovision inside,Accessory kit consists of cable ties, mounting ear screw earthling and spiral wrap tube.Can Include 12SC Terminations ,Removable Rubber grommet to allow for pre-terminated fiber trunk installation,protect cable and minimize dust build up,Should have cable ties,mounting ear screws and spiral wrap tube. Make: Systemax, AMP, D-Link, R&M
2455	Supply, Installation, Testing and Commissioning ofLC-SC Single Mode Fiber Patch Cord - 2 Meter.PATCH CORD LC-SC SM DUPLEX,Optical Fiber Equipment Cords (minimum 2 meter) All optical fiber patch leads shall comprise of Single mode 9/125µm fiber with SC/LC/FC, fiber connectors terminated at each end. The optical fiber patch leads shall comply with the following specifications: Optical Fiber – Corning Single Mode,Connector: Zirconia ceramic ferrule,Pre-radiuses and pre-polished ferrule,Simplex / Duplex ,Color-codedYellow for SM ,Insertion Loss - <0.2 db,Cable:9/125, SM,Repeatability - < 0.2 db ,Durability – 1000 mating cycle ,Working Temp : -20 deg C.to + 65 deg. C,Standard : G652D, G 657A & G 657B. Make: Systemax, AMP, D-Link, R&M
2456	Supply, Installation, Testing and Commissioning of SC Pigtail, Simplex - Single Mode.PIGTAIL SC SM SIMPLEX LENGTH- 1m ,Pigtails Corning G652D, G657A, G657Bsingle-mode /Insertion Loss Typical:<0.2dB, Max. 0.3dB(MTRJ:Max. 0.5dB)/Return Loss PC>45dB, UPC>50 dB,APC>60dB /ConnectorFerrule Ceramic, (MTRJ: PS- Polyphenylene Sulphide )Apex Offset <50um / Fiber Height ±100nm , End-face Radius of Curvature 7mm < R < 25mm (Excluding MTRJ)/ Repeatability <0.2dB 1,000 times mating cycles / Working Temperature – 20C ~+ 65C. Make: Systemax, AMP, D-Link, R&M
2457	Supply, Installation, Testing and Commissioning of 1G Base-LR Single-Mode, 10KM, SFP+ (1310 nm).OEM Must have Local Office in Punjab/Chandigarh for Quick Support. All Switches and Networkiing Components from Same OEM.OEM should be present in Gartner Quadrant from last 5 years. Make: Cisco, Extreme, D-Link, Juniper
2458	Supply, Installation, Testing and Commissioning of 3 KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 96v, Efficiency : Above 90%. With For 60 minutes SMF battery backup , rack/interlink cables. Make: Eaton, APC, Emerson
2459	Supply, erection, testing & commissioning of 1KVA onlinesine wave UPS/ Power plant with in built SMF batteries having 30 minutes backup time complete in all respects as approved and desired by the Engineer-in-charge at site. Make: APC, Numeric, Uniline, Eaton, Aqua Power.
2460	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2461	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
2462	PVC CHANNEL (uPVC TRUNKING):Supply and erection ofPVC Channel (uPVC Trunking) with cover of various sizes (On Surface) on wall, Flat angle, internal & external angle, Flat Tee, End cap and mounting boxes including the cost of joint cover, fixing and other petty material etc.:-
2463	PVC Channel (uPVC Trunking) 50mm x 50mm
2464	End Cap50mm x 50mm
2465	PROVIDING SUBSTATION WORKS:
2466	HT CABLES & HT TERMINATION KIT:
2467	XLPE INSULATED HT ARMOURED CABLES (UNDERGROUND):Supply & laying of Circular Aluminium Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:-
2468	HT Cable Overall size 120sq.mm (3Core)
2469	XLPE INSULATED HT ARMOURED CABLES (LOOSE):Supply & laying of Circular Aluminium Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:-
2470	HT Cable Overall size 120sq.mm (3Core)
2471	S/E of Heat shrinkable cable end termination/ Straight through joint kit for 11 KVA /6.6 KV (E) XLPE Cables as approved & desired by Enginer in charge:-
2472	Heat Shrinkable End Termination for cable size 120-185 sq. mm, 3Core (Indoor Type)
2473	Heat Shrinkable End Termination for cable size 120-185 sq. mm, 3Core (Outdoor Type)
2474	11KV HT SINGLE VACUUM CIRCUIT BREAKER SWITCHBOARD PANEL FOR INCOMING & OUTGOING:
2475	Supply, Erection, Testing and Commisioning of 11kV, 3Phase, 50Hz, Indoor metal clad, floor mounted, ‘Horizontal draw out’ type VCB (Vacuum Circuit Breaker) switch board unit 630 Amp. which includes 630 Amp. Vacuum Circuit Breaker for Incoming/ Out going feeder with Electrolytic Copper bus bars of suitable rating, Horizontal Isolation type as per IEC 62271-100-200. The Switchgear panels shall be sheet steel construction with ALUZINC not less than 2.5mm thickness for load bearing sections and not less than 2mm thickness for non-load bearing, dust, moisture and vermin proof to provide a degree of protection IP-4X in accordance with IS:13947. VCBs are type tested according to International Standards IEC-62271 at renowned laboratories. They are compact, safe and reliable. The Panels shall be tested for IAC level of 25kA/1 Sec. No. of operations of Vacuum interrupter bottles for better performance (i) At rated current: 10,000 operation (ii) No. of short circuitdead operation at rated short circuit current: 100 opeartion
2476	VCB parameters are as below: (a). Rated Voltage: 12kV(b). Rated short circuit breaking current withstand : Min. 25kA for 3sec.(c). Rated insulation voltage lightning (Impulse withstand) : At 75kV Peak(d). Rated insulation voltage( Power frequency withstand) : Min. 28kV(e). Rated operating sequence : O-0.3 sec - CO - 3 min-CO(f). Spring charging mechanism : Manually as well as motor operated (230V, AC, 50Hz)(g). Operation type: Manually and electrically open (Electrical-230V, AC,50Hz) (h). Earthing Switch : Mechanically interlocked device to prevent personnel from getting electric shock during breaker maintenance. VCB incorporating mechanical as well as electrical ON/OFF indiaction \"OFF\" push button, test/ serviceposition limit switches, with minimum 6NO+6NC breaker auxiliary contacts in service position, Manual charging of breaker should be done without opening the front door.
2477	Incomer shall consist of:(a). Cast Resin CT\"s 11kV : 200-100/5+5A, Core1: Class1, 10VA for 3phase, Core2: 5P10, 10VA(b). Cast Resin PT\"s 11kV : PT Ratio 11kV/v3 / 110V/v3 / 110V/v3, Class 1, Class 0.5 Burden 50VA(c). Protections : Numerical instantaneous IDMTL mimic dispaly relay (230V, AC, 50Hz) : U/V, O/V, E/F, O/C, S/C & TCS with RS 485 Modbus protocol for communication & drawout type(d). Master Trip/ Anti pumping relay(e). Digital Voltmeter : Range 0-12kV with necessary voltmeter with built in selector switch & suitable for 230V AC 96x96 sq.mm dial with shrouded terminal.(f). Digital Ammeter : Applicable Range with necessary ammeter with built in selector switch & suitable for 230V AC 96x96 sq.mm dial with shrouded terminal.(g). Multi-function meter with suitable communication to Central Software dta control & SCADA system, Converter having facility of real time data monitoring, historical trend and web dashboard(h). Necessary AC supply, healthy indication lamp & switch, TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, Local/ remote selector switch for breaker open/close operationsAll the relays shall belong to a common platform and shall be of single make with Electro-mechanical type relays in draw-out casing. PCB shall be with conformal coating to withstand heavily polluted environments.
2478	Outgoing shall consist of:(a). Cast Resin CT\"s 11kV : 200-100/5+5A, Core1: Class1, 10VA for 3phase, Core2: 5P10, 10VA (b). Protections : Numerical instantaneous IDMTL mimic dispaly relay : E/F, O/C, S/C & TCS with RS485 Modbus protocol for communication & drawout type for line feeder protection(c). Master Trip/ Anti pumping relay(d). Transformer Protection : 3 elements auxiliary relay (230V, AC, 50Hz) for transformer fault, Alarm for Buchholz, winding temperature & oil temperature (e). Digital Ammeter : Applicable Range with necessary ammeter with built in selector switch & suitable for 110V AC 96x96 sq.mm dial with shroded terminal(f). Multi-function meter with suitable communication to Central Software dta control & SCADA system, Converter having facility of real time data monitoring, historical trend and web dashboard(g). Necessary AC supply, healthy indication lamp & switch, TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, Local/ remote selector switch for breaker open/close operationsAll the relays shall belong to a common platform and shall be of single make with Electro-mechanical type relays in draw-out casing. PCB shall be with conformal coating to withstand heavily polluted environments:-
2479	11kV, 3Phase, 50Hz, Indoor metal clad, floor mounted, ‘Horizontal draw out’ type VCB (Vacuum Circuit Breaker) Switch board unit 630 Amp. which includes 1 No. 630 /800Amp. Vacuum Circuit Breaker for Incoming/ Out going feeder with in built power pack. Make: Schneider Electric, ABB, L&T, Siemens, Crompton Greaves
2480	Supply, Erection, Testing and Commisioning of 11kV, 3Phase, 50Hz, Indoor metal clad, floor mounted, ‘Horizontal draw out’ type VCB (Vacuum Circuit Breaker) switch board unit 630 Amp. which includes 630 Amp. Vacuum Circuit Breaker for Incoming/ Out going feeder with Electrolytic Copper bus bars of suitable rating, Horizontal Isolation type as per IEC 62271-100-200. The Switchgear panels shall be sheet steel construction with ALUZINC not less than 2.5mm thickness for load bearing sections and not less than 2mm thickness for non-load bearing, dust, moisture and vermin proof to provide a degree of protection IP-4X in accordance with IS:13947. VCBs are type tested according to International Standards IEC-62271 at renowned laboratories. They are compact, safe and reliable. The Panels shall be tested for IAC level of 25kA/1 Sec. No. of operations of Vacuum interrupter bottles for better performance (i) At rated current: 10,000 operation (ii) No. of short circuitdead operation at rated short circuit current: 100 opeartion
2481	VCB parameters are as below: (a). Rated Voltage: 12kV(b). Rated short circuit breaking current withstand : Min. 25kA for 3sec.(c). Rated insulation voltage lightning (Impulse withstand) : At 75kV Peak(d). Rated insulation voltage( Power frequency withstand) : Min. 28kV(e). Rated operating sequence : O-0.3 sec - CO - 3 min-CO(f). Spring charging mechanism : Manually as well as motor operated (230V, AC, 50Hz)(g). Operation type: Manually and electrically open (Electrical-230V, AC,50Hz) (h). Earthing Switch : Mechanically interlocked device to prevent personnel from getting electric shock during breaker maintenance. VCB incorporating mechanical as well as electrical ON/OFF indiaction \"OFF\" push button, test/ serviceposition limit switches, with minimum 6NO+6NC breaker auxiliary contacts in service position, Manual charging of breaker should be done without opening the front door.
2482	Incomer shall consist of:(a). Cast Resin CT\"s 11kV : 200-100/5+5A, Core1: Class1, 10VA for 3phase, Core2: 5P10, 10VA(b). Cast Resin PT\"s 11kV : PT Ratio 11kV/v3 / 110V/v3 / 110V/v3, Class 1, Class 0.5 Burden 50VA(c). Protections : Numerical instantaneous IDMTL mimic dispaly relay (230V, AC, 50Hz) : U/V, O/V, E/F, O/C, S/C & TCS with RS 485 Modbus protocol for communication & drawout type(d). Master Trip/ Anti pumping relay(e). Digital Voltmeter : Range 0-12kV with necessary voltmeter with built in selector switch & suitable for 230V AC 96x96 sq.mm dial with shrouded terminal.(f). Digital Ammeter : Applicable Range with necessary ammeter with built in selector switch & suitable for 230V AC 96x96 sq.mm dial with shrouded terminal.(g). Multi-function meter with suitable communication to Central Software dta control & SCADA system, Converter having facility of real time data monitoring, historical trend and web dashboard(h). Necessary AC supply, healthy indication lamp & switch, TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, Local/ remote selector switch for breaker open/close operationsAll the relays shall belong to a common platform and shall be of single make with Electro-mechanical type relays in draw-out casing. PCB shall be with conformal coating to withstand heavily polluted environments.
2483	Outgoing shall consist of:(a). Cast Resin CT\"s 11kV : 200-100/5+5A, Core1: Class1, 10VA for 3phase, Core2: 5P10, 10VA (b). Protections : Numerical instantaneous IDMTL mimic dispaly relay : E/F, O/C, S/C & TCS with RS485 Modbus protocol for communication & drawout type for line feeder protection(c). Master Trip/ Anti pumping relay(d). Transformer Protection : 3 elements auxiliary relay (230V, AC, 50Hz) for transformer fault, Alarm for Buchholz, winding temperature & oil temperature (e). Digital Ammeter : Applicable Range with necessary ammeter with built in selector switch & suitable for 110V AC 96x96 sq.mm dial with shroded terminal(f). Multi-function meter with suitable communication to Central Software dta control & SCADA system, Converter having facility of real time data monitoring, historical trend and web dashboard(g). Necessary AC supply, healthy indication lamp & switch, TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, Local/ remote selector switch for breaker open/close operationsAll the relays shall belong to a common platform and shall be of single make with Electro-mechanical type relays in draw-out casing. PCB shall be with conformal coating to withstand heavily polluted environments:-
2484	11kV, 3Phase, 50Hz, Indoor metal clad, floor mounted, ‘Horizontal draw out’ type VCB (Vacuum Circuit Breaker) Switch board unit 630 Amp. which includes 1 No. 630 /800Amp. Vacuum Circuit Breaker as Incomer, 2Nos. Vacuum Circuit Breaker as Out going feeder with in built power packs interconnected with Electrolytic Copper bus bars of suitable ratingMake: Schneider Electric, ABB, L&T, Siemns, Crompton Greaves
2485	TRANSFORMERS 800KVA:
2486	Supply, installation, testing and commissioning of 11KV/433V, 800KVA, Indoor/Outdoor type floor mounted Distribution Transformer, Three Phase 50 Hz, Oil Immersed, Naturally Cooled ONAN, Core type Double wound with copper conductor cnforming to IS:1180 (2014) Level-3 & IS: 2026 with first filling of Oil as per IS:335 compltete with connections on both sides (HT/LT side) as per satisfaction of Engineer Incharge at site. (a). Output Rating : KVA (b). No Load Voltage ratio at rated voltage & frequency: 11KV/ 0.433kV(c). Off Circuit Tap changer: +5% to -10% off circuit tapping in steps of 2.5%.(d). Vector group : Dyn11 (e). Ambient temperature: 50°C(f). Oil/ Winding temperature rise: As per IS:1180(g). Magnetic Core:Prime grade of M4 or better (h). System Highest Voltage :- 12kV at the HV side (i). Terminations: Cable Box on HV & LV Side(j). Insulation Level: ? H.V. Power Frequency (KV rms) : 28 kV ? H.V. Impulse withstand voltage (KV peak): 75 kVpThe Tranformers shall fitted withaccesories like Rating and Diagram anodized aluminium plate, 2 Nos. Earthing terminals, 4 Nos. Lifting Lugs, Air Release hole with plug, Dehydrating Silica Gel Breather, Oil Level guage with minimum level marking, Conservator with Oil filling hole with cap & drain plug, Thermometer Pocket, Jacking Lugs, Bottom Drain cum filter valve, Top Filter Valve, 4Nos. Uni-directional rollers, Explosion vent with diaphragm, Marshmalling Box (Protection Class IP55), OTI with alarm & trip, WTI with alarm & trip, Double float Buchholz relay with alarm & trip, 2Nos. Shunt off valves for Buchholz relay& Fixed/ Detachable Radiator. Note: Manufacturer testing labotatory to be NABL certified with in house core cutting facility for proper control & monitoring of quality & to avoid mixing of Prime core with Second grade /defective core materials. Transformer designed for 110% continuous overfluxing withstand capability as per IS:6600. Noise Level for Transformer shall be as per NEMA TR1-2013. All Routine Test shall be carried out as per IS: 2026:- Make: Schneider, Kirloskar, Crompton Greaves, Voltamp
2487	APFC PANEL 300KVAR:
2488	Design, supply, installation, testing and commissioning of APFC Panel of 300 KVAR capacity with 7% detuned reactor suitable for operation on 415 ± 5% Volt, 3 Phase, 50 Hz, Ac supply, having MPP type resin bounded static capacitors (without oil) of suitable rating complete with MCCB Four Pole 630amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting (Ics = 100%) capacity panel, 12step microprocessor based power factor controller relay capable to select the rating from1No.x 5KVAR, 2No.x 10KVAR, 2No.x 15KVAR, 1No. x 20KVAR, 5No. x 25KVAR, 2No. x 50KVAR capcitor bank, current limiting contactors for each capacitors protected with suitable rating MCCBs of minimum 25 KA breaking capacity having thermal magnetic release for over load & short circuit protection, cooling fans for panel and digital multifunction meter, Class-1.0 with RS485 communication port indicating lights, earthing the panel etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part of 300 KVAR capacity, automatically as and when required. Capacity of static capacitor should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with1.6 mm thick CRCA sheet duly powder coated etc complete as per PWD specification complete as persatisfaction of the Engineer in charge at site.Panel builders Make: Kalyani Switchgear, ETE Electrogears, Power Associates, Unix, CMKL
2489	MAIN LT PANEL- NORMAL SUPPLY
2490	Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacture should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP44).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS:8623. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. The base channel will be made out of 75mm x 40mm x 5mm rolled channel. \"The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc.
2491	Painting:The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work. Busbars: The panel shall be provided with TPN copper busbar of suitable size according to the size of MCCB\"s.All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard). The Concerned contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of ACB/MCCB\"s to be installed in the cubical panel Enclosure (including the cost of MCCB\"s+E.R.H.) as per following.
2492	Transformer Incomer: Air circuit-breaker of suitable ampere rating at 415V, 50Hz, 4 Pole Electrical draw-out type with inbuilt microprocessor based trip sytem with thermal memory, zone selective interlocking, pre trip alarm, individual fault indicating LED, O/C, S/C, Instantaneous & E/F internal protection, Impulse withstand voltage 12kV, rated insulation voltage 1000V, rated operational voltage 690V, fully rated neutral, protection against overload & shortcircuit with setting at 50%-100%-OFF,suitability for isolation as per IEC 60947-2. The ACB should be capable for recording 10 fault history, LCD Display of current & voltage, Icu = Ics = Icw (1 Sec.) = 50kA with no derating upto 50 degree celcius on the existing industrial panel (With terminal adapter on load and line side of breaker), including bonding to the existing earth and making necessary connections with suitable size of thimbles as required by the Engineer-in-Charge at site and as per PWD General Specifications¦ 1250 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From Transformer-1, 800KVA)Under Voltage Release 220VAC for ACB Interlocking¦ 1250 Amp.415volts 50KA,, 4P EDO ACB = 1No. (Bus Coupler)Under Voltage Release 220VAC for ACB Interlocking¦1250 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From Transformer-2, 800KVA) Under Voltage Release 220VAC for ACB InterlockingINTERLOCKING: Both incomer and Buscoupler electricaly interlocked at a time two breaker can be operate. (Electrically & Mechanical Interlocked)
2493	Outgoings from Transformer-1, 800KVA.:¦ 630amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 2Nos.¦ 400amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 1No.¦ 250amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit= 2Nos. ¦ 160amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 1No. ¦ 100amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 2Nos. ¦ 40-80amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 2Nos. Outgoings from Transformer-1, 800KVA :¦ 800amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 2Nos.¦ 400amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 2No.¦ 250amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 2Nos. ¦ 160amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 1No. ¦ 100amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 2Nos. ¦ 40-80amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 2Nos. ¦All Incomers & Out going With Extendable Rotary Handle with adjustable depth complete as per schematic diagram attached & Satisfaction of the Engineer in charge at site.Enclosure:Panel Size: As per NormsPanel builders Make: Kalyani Switchgear, ETE Electrogears, Power Associates, Unix, CMKL
2494	AMF PANEL (LOAD SHARING PANEL):
2495	Designing, Supply, Erection, Testing & commissioning of indoor Type AMF PANEL (LOAD SHARING PANEL) suitable for 2Nos. DG Set capacity 400 KVA enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacture should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP44).Fabrication: Panel shallbe made from 14/16 SWG CRCA sheet, conforming to IS:8623. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. The base channel will be made out of 75mm x 40mm x 5mm rolled channel. \"The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/topwith cable glands etc.
2496	Painting:The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work. Busbars: The panel shall be provided with TPN copper busbar of suitable size according to the size of MCCB\"s.All Busbar will be airinsulated withcodified in Red,Yellow,Blue & Black asperstandardfor cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT\"s & L.E.D. type indicator etc. Manufacturer of Panel should beCPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard). The Concerned contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of ACB/MCCB\"s to be installed in the cubical panel Enclosure (including the cost of MCCB\"s+E.R.H.) as per following.
2497	AMF Systemfor Load Sharing:AMF Relay, Start - Stop Push Buttons (Set), Auxiliary Relay - 220VAC - 10A, Auxiliary Relay - 12/24VDC - 10A, Control Selector Switch, Battery Charger 220V AC/12/24VDC-10A with Auto-Cut Booster,Terminal Blocks - Power and Control, Panel Mounted Hooter, Emergency Stop Push Buttons 220V AC, Hooter for Alarm - 24V DC, Hooter Accept Push Button, Voltage Monitoring RelayPLC System - For Interlocking & Load Shearing + Load Management:
2498	AMF PANEL (LOAD SHARING PANEL) suitable for 2Nos. DG Set capacity 400 KVA EACH:Air circuit-breaker of suitable ampere rating at 415V, 50Hz, 4 Pole Electrical draw-out type with inbuilt microprocessor based trip sytem with thermal memory, zone selective interlocking, pre trip alarm, individual fault indicating LED, O/C, S/C, Instantaneous & E/F internal protection, Impulse withstand voltage 12kV, rated insulation voltage 1000V, rated operational voltage 690V, fully rated neutral, protection against overload & shortcircuit with setting at 50%-100%-OFF,suitability for isolation as per IEC 60947-2. The ACB should be capable for recording 10 fault history, LCD Display of current & voltage, Icu = Ics = Icw (1 Sec.) = 50kA with no derating upto 50 degree celcius on the existing industrial panel (With terminal adapter on load and line side of breaker), including bonding to the existing earth and making necessary connections with suitable size of thimbles as required by the Engineer-in-Charge at site and as per PWD General SpecificationsIncomer Feeder From Transformer-1: ¦ 800 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From Transformer-1, 800KVA) = 1No. Incomer Feeder: 400KVA¦ 800 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From DG SET 800KVA) = 1No. Bus Coupler: ¦ 800 Amp.415volts 50KA,, 4P EDO ACB = 1No. Incomer Feeder From Transformer-2: ¦ 800 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From Transformer-1, 800KVA) = 1No. Incomer Feeder: 400KVA ¦ 800 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From DG SET 800KVA) = 1No. Outgoings Feeders: ¦ 400amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 5Nos.¦ 250amp. 415 volts breaking capacity =36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 4Nos.¦ 160amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 1No. ¦ 125amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 1No. ¦ 100amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 3Nos. ¦ 40-80amp. 415 volts breaking capacity =25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 2Nos. ¦All Incomers & Out going With Extendable Rotary Handle with adjustable depth complete as per schematic diagram attached & Satisfaction of the Engineer in charge at site.Enclosure:Panel Size: As per NormsPanel builders Make: Kalyani Switchgear, ETE Electrogears, Power Associates, Unix, CMKL
2499	SANDWICH TYPE ALUMINIUM BUS BAR TRUNKING:
2500	Supply, Installing testing and commissioning of 1250A, 3P + 100% Neutral, 50KA For 1 Sec, Sandwich Bus trunking Straight Feeder Length, Aluminium Conductor, IP 55 with GI Enclosure in 1.5mm Thick. continuous earthing with 2 Nos integral earth conductor and Suspension Hanging system etc along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2501	Supply, Installing testing and commissioning of 1600A, 3P + 100% Neutral, 50KA For 1 Sec, Sandwich Bus trunking Straight Feeder Length, Aluminium Conductor, IP 55 with GI Enclosure in 1.5mm Thick. continuous earthing with 2 Nos integral earth conductor and Suspension Hanging system etc along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2502	Supply, Installing, testing & commissioning of Elbow vertical/Horizontal /off set Bend 1250Amp / 3P+1N+E (Only fabrication charges) etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2503	Supply, Installing, testing & commissioning of Elbow vertical/Horizontal /off set Bend 1600Amp / 3P+1N+E (Only fabrication charges) etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2504	Supply, InstallingFlange End Unit 1250 Amp (Fabrication Charges only) complete with hardware-nuts and bolts etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2505	Supply, InstallingFlange End Unit 1600 Amp (Fabrication Charges only) complete with hardware-nuts and bolts etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2506	Supply, installation, Copper Flexible 1250Amp(1 Set of 4Nos. Copper Flexible) complete with hardware-nuts and bolts etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2507	Supply, installation, Copper Flexible 1600Amp(1 Set of 4Nos. Copper Flexible) complete with hardware-nuts and bolts etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2508	Supply, installation, ofAdopter Box/tap off box for Transformer side and panel side1250 Amp. etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2509	Supply, installation, ofAdopter Box/tap off box for Transformer side and panel side 1600 Amp. etc.along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Legrand, Schneider, L&T, C&S
2510	SUB STATION SAFETY EQUIPMENTS:
2511	Supply of Rubber hand gloves suitable for 11KV.
2512	Supply & fixing of shock treatment chart both in Hindi & English for treating person suffering due to electricshock mounted on wall hooks.
2513	Providing and fixing H.T. danger notice plate of 250 mm x 200mm, made of mild steel at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
2514	Providing and fixing M.V. danger notice plate of 200 mm x 150mm, made of mild steel at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
2515	Providing and fixing of Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878-1976 and cylinder fully charged of 4.5 Kg capacity.
2516	Supply and fixing of foam fire extinguishers, Portable type 9 Litre capacity hanged on wall with bracket component as required.
2517	Providing of set of 4 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red - oxide paint and written with white paint \"Fire\" and mounted on MS angle iron frame with bracket of appropriate size and capacity including filling sand etc.
2518	Supply of First Aid box as approved by St. John Ambulance Brigade / Indian red Cross conforming to IS 2217 -1963
2519	Supply & fixing of fire retardant/ extinguishing Electrical insulated synthatic mat of 2.0 mm thick +/- 10% confirming to BIS: DOC NO. ET-02 (5440) meeting requirments of IS: 15652 :2006 (with upto date amendment), suitable for all voltages not exceeding 3.3 KV and having minimum width of 1000 mm +/- 20mm and including supply of required quantity of adhensive/ compound and fixing the same at size as per site requirments.
2520	Supply & fixing of fire retardant/ extinguishing Electrical insulated synthatic mat of minimum 3.0 mm thick +/- 10% confirming to BIS: DOC NO. ET-02 (5440) meeting requirments of IS: 15652 :2006 (with upto date amendment),, suitable for all voltages not exceeding 33 KV and having minimum width of 1000 mm +/- 20mm and including supply of required quantity of adhensive/ compound and fixing the same at size as per site requirments.
2521	Supply and erection of XLPE/ PVC insulated PVC sheathed (10 core) unarmoured copper conductor cable (ISI marked) confirm to IS:7098 (PART-I), 1988 loose in the existing trench or pipe with suitable size of copper thimbles/ lugs complete in all respect as desired by the Engineer-in-charge:- (From VCB to Transformer for safety controls)
2522	Overall size 1.5sq.mm (10 Core)
2523	XLPEINSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
2524	Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
2525	Overall size 70sq.mm (3½ Core) Un-armoured (Loose)
2526	Overall size 95sq.mm (3½ Core) Un-armoured (Loose)
2527	Overall size 120sq.mm (3½ Core) Un-armoured (Loose)
2528	Overall size 185sq.mm (3½ Core) Un-armoured (Loose)
2529	Overall size 240sq.mm (3½ Core) Un-armoured (Loose)
2530	Overall size 300sq.mm (3½ Core) Un-armoured (Loose)
2531	Overall size 400sq.mm (3½ Core) Un-armoured (Loose)
2532	Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
2533	Aluminium thimble cable Core size 10 -16sq.mm
2534	Aluminium thimble cable Core size 25 -35sq.mm
2535	Aluminium thimble cable Core size 50sq.mm
2536	Aluminium thimble cable Core size 70sq.mm
2537	Aluminium thimble cable Core size 95sq.mm
2538	Aluminium thimble cable Core size 120sq.mm
2539	Aluminium thimble cable Core size 150sq.mm
2540	Aluminium thimble cable Core size 185sq.mm
2541	Aluminium thimble cable Core size 240sq.mm
2542	Aluminium thimble cable Core size 300sq.mm
2543	Aluminium thimble cable Core size 400sq.mm
2544	Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:-
2545	Brass Gland for Aluminium cable 2/3/3½/4 Core size 25-35sq.mm
2546	Brass Gland for Aluminium cable 3/3½/4 Core size 70sq.mm
2547	Brass Gland for Aluminium cable 3/3½/4 Core size 95-120sq.mm
2548	Brass Gland for Aluminium cable 3/3½/4 Core size 185sq.mm
2549	Brass Gland for Aluminium cable 3/3½/4 Core size 240sq.mm
2550	Brass Gland for Aluminium cable 3/3½/4 Core size 300sq.mm
2551	Brass Gland for Aluminium cable 3/3½/4 Core size 400sq.mm
2552	CABLE TRAY:
2553	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
2554	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
2555	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
2556	Cable Tray Size 450mm x 50mm x 50mm (2mm thick)
2557	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
2558	Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
2559	Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
2560	Double walled corrugated (DWC) HDPE pipe90/76mm (outer/ inner dia.)
2561	Double walled corrugated (DWC) HDPE pipe120/103.5mm (outer/ inner dia.)
2562	Double walled corrugated (DWC) HDPE pipe160/136mm (outer/ inner dia.)
2563	EARTHING:
2564	COPPER EARTHING (Upto 14 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2565	Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
2566	COPPER EARTHING (Upto 23 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 19.50 metre (63.96 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc.,up to 23metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 18metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2567	Earthing with 40mm x 5mm Copper Tape (upto 23Metre in Length)
2568	Additional Length 20mm x 3mm thick Copper Tape .
2569	Additional Length 40mm x 5mm thick Copper Tape
2570	PROVIDING SILENT DG SET & ACCESSORIES:
2571	Supply, Erection, Testing and Commissioning of Silent (Sound Proof) Diesel Generator Set 625 KVA /500KW .Itshould be air cooled/water coolednaturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard).ENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 ( With CPCB-II Norms) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/ electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 12 V/ 24 V DC ,battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.Make :- Cummins, Koel Greeen (Kirloskar), Mahindra (perkins)ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication and MCCB (Fixed Thermal and Adjustable Thermal protection) of suitable rating for outgoing supply.
2572	ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use.Make :- Crompton Greaves, Stamford , Koel Green (Kirloskar) Lesoy Somes.ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteriesaccommodated in thebattery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.with 2 yearwarranty from the date of installation. complete in all respect as desired by engineer at site:-The Generator set should be instaaled at site on the suitable sizeexistingplinth of RCC as per specifacationDG set as per satisfacation of the Engineer- in-Charge at site. The model of engine will be decided by the Engineer in Charge. MANUAL CONTROL PANEL: Manual control panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger complete in all respect as desired by engineer at site:-
2573	EXHAUST PIPE:
2574	Supply and fixing of following sizes of MS \" B \" Class piping with bends etc. for Exhaust of DG Sets including providing suitable self supporting arrangement at suitable intervals, painting etc. and supplying & fixing 150 mm thick Rock wool matrix (3x50 mm. thick) insulation of density 150 Kg per cubic metre on all sides of Exhaust pipe and silencer with chicken mesh wrapping and 22 SWG aluminium sheet cladding, suitable for outdoor installation complete as required including guide support, expansion joint, SS bellows as required and as per specification.
2575	250 mm dia (NB)
2576	PROVIDING EXTERNAL LIGHTING:
2577	POLES:
2578	GALVANIZED STEEL OCTAGONAL POLES FOR WIND VELOCITY OF 169 Km/ HOUR:Supply and erection ofGalvanized Steel Octagonal Pole (Sheet thickness 3mm) designed to withstand wind speed 169km/ hour of suitable length (Raw material confiming to IS-5986 (FE-510), BSEN-10025S-355J or ASTM-572A (GR-50)) and thickness of galvanization (70mm thick) conformingto IS:2629/ IS:2633/ IS:4759, BSEN-ISO-1461-1991 OR ASTM-A123/A123M-02. The pole shall be in single piece hot dip galvanized and shall be tapered towards the top. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangementfor housing three phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The octagonal pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. The foundation shall be erected over cement concrete M20with steel of given sizeas per design of original pole manufacturer to fixed up to a required planting depth below ground level as required:-
2579	Galvanized Octagonal Pole Overall Length 7 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm and bottom dia. (A/F) 130mm, Foundation size below G/L 550mm x 550mm x 1400mm, 4Nos. Foundation Bolts size 20mm dia., Length=700mm with Base Plate Dimensions 240mm x 240mm x 16mm Thick
2580	Galvanized Octagonal Pole Overall Length 4 metre, Top dia.(A/F) 70mm & Bottom dia. (A/F) 130mm, Foundation size below G/L 550mm x 550mm x 900mm, 4Nos. Foundation Bolts size 16mm dia., Length=450mm with Base Plate Dimensions 200mm x 200mm x 12mm Thick
2581	GALVANIZED OCTAGONAL POLE BRACKETS:Supply and erection of G.I. Pipe 50mm dia. (Medium) Single/ Double/ Triple arm bracket of suitable length welded with MS canopy 80mm inner dia., outer dia 89.5mm (Medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 76.1mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3Nos. ½\" x 1½\" size nut bolt fully threaded. The bracket should have MS sheet (1.62mm thick) ring of 89.5mm dia. for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angle 105º (105 degree) inclination with MS sheet 5mm thicktriangular in shape having dimensions 225/300/375mm x 150mm x 5mm thick (225mm for 1.5m, 300mm for 2m & 375mm for 2.5m long bracket) with two coats of an approved aluminium paint as desired by Engineer-in-charge at site:-
2582	Single arm bracket 0.5 metre long for galvanized octagonal pole
2583	DECORATIVE POLE WITH POST TOP FIXTURE:
2584	Supply, Erection, testing & commissioning of 4 Metre Decorative Steel Pole & Fixtures have following specification:Pole: 4 Metre Decorative Steel Pole are made of galvanized grooved steel tubes having bottom part of the pole 1000mm x 140mm x 4.8mm and upper part of the pole 3000mm x 90mm x 4mm made out of B class mild steel galvanized grooved tubes. The bottom and middle part of the poles are ?tted with cast aluminium embellishment and are ?tted and sealed by grub screws as shown in the drawing. The poles has a service window at the bottom containing 25Amp. connector terminal and MCB of the desired rating. The bottom cast aluminium embellishment cover the strengthening ribs and welding joints. The poles are primer coated and painted with polyurethane paint of the desired colour.Fixture : Urban Ornamental 40 Watt LED Post Top Luminaire made of aluminium housing duly powder coated/PU painted with PC/PMMA Clear/Frosted di?user with sturdy Twin arm. MCPCB having high Lumen LED’s are mounted on aluminium heat sinks. Foundation:Foundation size below G/L 550mm x 550mm x 900mm, 4Nos. Foundation Bolts size & rigid Base Plate suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. The foundation shall be erected over cement concrete M20with steel of given sizeas per design of original pole manufacturer to fixed up to a required planting depth below ground level as required as per drawing attached.Make:Twinkle Lite (Pole Cat. No.SCRLT-E10-409040, Fixture Cat. No. Twinkle Lite-511 (PT-40)) Twinkle Luxmax (Pole Cat. No.SP-140-400, Pole Base Cat. No. Cast Aluminium Pole Base-140,Fixture Cat. No. Luxmax-PT-232-P-40W Post Top), Homedec, K-Lite (DESIGN AS PER DRAWING ATTACHED)
2585	NOTE: (COMMON FOR ITEM NO.1 & 3)Size & Reinforcement details of foundation mention in BOQ item is minimum requirement. Contractor to check & confirm design of foundation prior to quoting and shall account for actual requirement. Foundation of Pole shall be cast as per contractor\"s shop drawing duly design verified from structural / civil agency.
2586	LIGHT FIXTURES:
2587	Supply, Installation Testing and Commissioning of 10-11 Watt LED bollard (Including driver) of height 800-1000mm made of MS housing black matt powder coated, special translucent PMMA diffuser with IP-65 protection complete with electronic control gear, fixing screws and all accessories as required at site. Make: Crompton Cat. No. LBLSN-10-CDL, Wipro Cat. No.LB14-131-XXX-65-08, Havell\"s Cat. NO. MOUNTBL10WLED857PSYMTOPMMAM (1.0 M)
2588	Supply, installation, testing and commissioning of 1Watt asymmetrical inground driveover luminaire with driver with fixture body made of diecast aluminium integrated with toughened glass diffuser, beam angle 35º /45º shidding ring of stainless steel, ofprewired for operation on 240V, 50 Hz with IP-65 Protection complete with all accessories as required complete as required and all accessories as required. K-:Lite Cat. No.4107
2589	Supply, installation, testing and commissioning of 7Watt symmetrical inground driveover luminaire with driver with fixture body made of diecast aluminium integrated with toughened glass diffuser, beam angle 10º /24º shidding ring of stainless steel, ofprewired for operation on 240V, 50 Hz with IP-65 Protection complete with all accessories as required complete as required and all accessories as required. K-:Lite Cat. No.4147
2590	Supply and erection of LED street light 60 watt with pressure die cast aluminium housing with control gear (IP 66 protection), toughened glass fitting, surge protection 10KV and efficacy of LED fixture minimum 100 lumens per watt complete in all respects as approved and desired by the Engineer in-charge at site. The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.Make: Havell\"s Cat. No. NDURAPEARLNEOSL60WLED757PASYTOPC, Crompton Cat. No. LST-60-CDL-M, Bajaj Cat. No. ENXT P 60L WW CR PC SD, Wipro Cat. No. LR13-671-XXX-57-XX
2591	Supply, Installation, Testing and Commissioning of 9Watt LED circular wall/ceiling mounting light fixture with housing made of ABS plastic with high efficency Translucence diffuser IP-54 protection rating, complete with driver & all accessories as required of Wipro Cat. No. MOON LED (LW01).
2592	Supply, Installation, Testing and Commissioning of 8-9Watt LED Integral bush light made of diecast aluminium, powder coated housing, high efficiency plastic reflector, 10/24/36/55 deg. Beam angle, IP-67 protection with inbuilt electronic driver complete with earth spike & all other accessories as requried of Wipro Cat. No.LF05-600-036-27-XX, Havell\"s Cat. No. LYCUSSPS9WLED730PSYMBOTG
2593	Supply, Installation, Testing and Commissioning of 6W LED Under water luminaires made out of marine grade 316 stainless steel, IP-68 protection, 24V DC operated voltage complete with wall recess box, screws, wire entry cutout, 5 meter Cable & all fixing accessories complete as required. MAKE: K-LITE Cat. No.4131
2594	Supply, Installation, Testing and Commissioning of 12W LED Under water luminaires made out of marine grade 316 stainless steel, IP-68 protection, 24V DC operated voltage complete with wall recess box, screws, wire entry cutout, 5 meter Cable & all fixing accessories complete as required. MAKE: K-LITE Cat. No.4127
2595	Supply, Installation, Testing and Commissioning of 18W LED Under water luminaires made out of marine grade 316 stainless steel, IP-68 protection, 24V DC operated voltage complete with wall recess box, screws, wire entry cutout, 5 meter Cable & all fixing accessories complete as required. MAKE: K-LITE Cat. No.4129
2596	Supply, Installation, Testing and Commissioning of 60W, 24V DC 2.5 Amp., IP-67 Power supply suitable for under water luminaires complete in all respect with satisfaction of the Engineer-in-charge.MAKE: K-LITE Cat. No.8197
2597	Supply and erection of LED Flood Light 80watt (including LED driver), IP-66 Pressure Die cast aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: WIPRO LF19-931-060-57-XX, Crompton LFL-80-CDL/60-HPM, BAJAJ BJFL 80W LED I
2598	Supply and erection of LED Flood Light 150watt (including LED driver), IP-66 Pressure Die cast aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: WIPRO LF19-931-060-57-XX, Crompton CFS-501-150-57-60D-SL-GL-NGG , BAJAJ BJFL 150W LED I
2599	Supply and erection of LED Flood Light 250watt (including LED driver), IP-66 Pressure Die cast aluminium with efficacy of LED fixture more than 100 lumens per wattand operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % completealong with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting\"s should beas approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: WIPRO LF30-342-060-57-XX, Crompton CFS-506-250-57-60D-HL2-GL-NBR, BAJAJ BJFL 250W LED WH MB
2600	Supply, installation, testing and commissioning of Step light recess mounted 4-6W LED fixture (including driver) and all accessories as required. Make: Crompton Cat. No. LSL-6-CDL, Bajaj Cat. No.BLSGV 4W LED WH, Havell\"s Cat. No. RADIANTNEOFT07WLED830SASYMBOPC
2601	XLPE INSULATED ARMOURED CABLES (ON SURFACE):
2602	Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
2603	Overall size 16sq.mm (4Core) Un-armoured (On-Surface)
2604	Overall size 6sq.mm (3Core) Armoured (On-Surface)
2605	Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
2606	Aluminium thimble cable Core size 4 - 6sq.mm
2607	Aluminium thimble cable Core size 10 -16sq.mm
2608	Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:-
2609	Brass Gland for Aluminium cable 2/3/4 Core size 6sq.mm
2610	Brass Gland for Aluminium cable 2/3/4 Core size 16sq.mm
2611	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
2612	Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
2613	Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
2614	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
2615	Heavy gauge PVC conduit pipe 32mm dia. (ISI marked) Flushed
2616	CABLE TRAY:
2617	Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
2618	Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
2619	Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
2620	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
2621	Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
2622	Double walled corrugated (DWC) HDPE pipe90/76mm (outer/ inner dia.)
2623	Double walled corrugated (DWC) HDPE pipe160/136mm (outer/ inner dia.)
2624	PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
2625	Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
2626	Overall size 1sq.mm (Un-sheathed)
2627	Overall size 1.5sq.mm (Un-sheathed)
2628	Overall size 2.5sq.mm (Un-sheathed)
2629	Overall size 4sq.mm (Un-sheathed)
2630	Overall size 6sq.mm (Un-sheathed)
2631	Overall size 10sq.mm (Un-sheathed)
2632	MDB & DB\"s EXTERNAL LIGHTING:
2633	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB\"s: Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB\"s as incomer and outgoings SP/TPminiature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
2634	MDB-EXTERNAL LIGHTING:
2635	TP&NDouble Door Vertical DB\"s 8 way each (With provision of FP MCCB upto 125amp)
2636	DB-1 TYPICAL FOR DB-2, DB-3, DB-4, DB-5, DB-6 & DB-7
2637	TP&NDouble Door Vertical DB\"s 4 way each (With provision of FP MCCB 125amp.)
2638	Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
2639	MCCB Four Pole 63/80/100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2640	MCCB Four Pole 125amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2641	MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
2642	MCB Single Pole 6-32amp. (10kA, Curve-C)
2643	MCB Triple Pole 40amp. (10kA, Curve-C)
2644	EARTHING SYSTEM:
2645	G.I. EARTHING:Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).
2646	Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 8Metre in length)
2647	COPPER EARTHING (Upto 8 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc.,up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2648	Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
2649	COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
2650	Additional Length 20mm x 3mm thick Copper Tape
2651	G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc.
2652	Additional length G.I. rope 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (On Surface)
2653	PROVIDING ADVANCE LIGHTING PROTECTION SYSTEM:
2654	As per Drawing Attached:
2655	Supply, erection, testing & commisioning ofEarly Streamer Emission (ESE)type Lightning Protection Complete with Lightning Air Terminal. The System should be corrosion resistant stainless steel chrome bodycapable of working in hazardous atmosphere andprotecting against direct Lightning point as well conducting /diverting it to earth completely after tracing the Lightning in advance. As per NF C 17-102:2011 the air terminal should be tested for Lightning impulse current (10/350 micro sec) =100 KAand for local certification the air terminal should be tested forswitching impulse currentof 40 KA (8/20 micro sec) as per CPRIwith 5 positive and 5 negative impulse. The ESETerminals shall offer a protection radius of 79mtr., Level-1 High Protection and preferably to be mounted on roof top and center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. (Its working principle evolves from local electrostatic field that develops naturally around the system as a thunderstorm begins to gather. In the event of descending lightning, an inbuilt triggering device generates high tension pulses at the conductor tip, causing a ‘corona effect’.) Protection radius of 79Mtr at level 1 & 107 Mtr at level 4 Make: JMV, LPI, Escoltrix
2656	Supply and fixing of GI Mast 5 mtr. height along with suitable base plate for mounting the terminal along with highly insulatedadopter to mount ESE Air Terminal with the Mast.The Adapter shall have suitable Metal connector /Connecting point in such a way the top portion shall be electrically connected to the central tip of the ESE terminal and bottom portion connected to the down conducto, stray wires along with support shall be securely fixed with base plate and gauge wires where ever required.Make: JMV, LPI, Escoltrix
2657	Supply and installation of Lightning Strike Counter (6 digit display) of non-resettable(electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system. This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures. It should be in IP-65 enclosure with minimum sensitivity of 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs. above the ground level.Make: JMV, LPI, Escoltrix
2658	Supply & erection of test Link of non-corroding, weather proof, water proof polycarbonate IP 65/55 enclosure including providing of 2 Nos. of insulated supports with suitable holes prefitted nuts & bolts to fix the down conductor & earth wire. The transparent cover fitted at approximately 500-1000mm from ground level shall be provided on each down conductor.Make: JMV, LPI, Escoltrix
2659	Supply, installation & testing of chemical earthing (Maintenance Free Earthing) system with UL approved copper bonded rod and exothermically welded copper busbar both tested by CPRI at 50kA Fault Current. A copper bonded steel rod shall have 3000 mm length and17.2 mm dia. with copper coating thickness of minimum 250 microns. Along with earth enhancement compound tested by ROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A copper clad steel solid ground wire of 8 mm dia. for interconnecting earth pits. Each earth pitshall be covered with heavy duty weather proof environment friendly polyplastic earth pit chamber. The grounding minerals should not be pollute the ground water. The grounding minerals shall be tested & certified for the resistivity of less than 0.12 ohm-mtr.Make: JMV, AI (Amiable Impex), Growth
2660	Cost of pole foundation with earth work in excavation in foundations trenches etc. 0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast, Reinforced cement concrete M-20,Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge.
2661	PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
2662	Overall size 70sq.mm (Un-sheathed) (as down conductor to connect the air terminal and erthing)
2663	PROVIDING LIFTS 4NOS. 13 PASSENGER:
2664	ZONE-1 ENTRANCE PLAZA:
2665	1No. Lift13 Passengers (3 Floors): For Lower Basement to Entrance Plaza (Ground floor)
2666	Supply, installation, testing and commissioning of 1 No. lift of 13 passengers machine room less.Type and Capacity :Approximately 884 Kg, 13 PassengersSpeed:1.0 Meter per secondType of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor.Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist wayTravel: Approximately 8.5 meter________Serving:_3 Floors _3 Stops_3 Openings_3 Levels (All on the same side)Hoist way Required: 2050mm (Wide) x 2500mm (Deep) Clear dimensionsHeadroom Height (HR): 5000 mm beyond finished floor level of last landing Pit Depth: 1600mm below the finish floor level of first landing Car Size Area: Minimum 2.06 square meter and Maximum 2.20 square meter Car Enclosure: Constructed out of stainless steelScratch proof Finish (Vandal Proof).Car Entrance: Center Opening Automatic Doors with vision panel (40% area should be visible by glass) of Stainless steel finish panel in Scratch Resistance/ Vandal proof with a clear opening of 900mm (wide) x 2000mm (high) Door operation: Automatic DC Door operation with adjustable door opening and closing timings Control: Simplex full selective collective control with and without attentdentOperation: Automatic Power Supply: 415 Volts, 3- phase, 50Hz Alternating CurrentFlooring: Floor Skid - Resistant as per standardFan: Blower Fan in Car for ventilation with Auto cut offLighting: LED for Car LightingIndicators: LED Dot matrix / Digital 3 segement direction and position indicators in the car and at all landings Hand Rail: Stainless Steel round Hand rail not less than 600mm long at 900mm above floor level (Side LH,Side RH & Rear) Call Button Height: Call button (Outside the lift) placed at a height between 800mm-1meter from the floor level Control Panel Height: Control panel placed at a height between 800mm-1meter from the floor level Std. Govt. features.
2667	Other Features:1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons5. Door Open and Close buttons6. Emergency Intercom provided inside the elevator7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication9. Steel items, door frames sill angle\"s, fascia plates, spring buffers10. Automatic phase reversal device and Phase Failure protection11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level\"s in english/regional language only and indication of door for entrance / exit is .either Open or Close19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.28. The provision of mirror on the wall of the lift car opposite the lift door not extend below 900mm from the lift floor to avoid confusing people with impaired sight.29. The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids.30. Elevator must compulsoy with the letterconstruction as desired in the disability set.Make: Otis, Schindler, Kone, Mitshubishi
2668	ZONE-3 COVERED COLLONADE:
2669	Supply, installation, testing and commissioning of 1 No. lift of 13 passengers machine room less.Type and Capacity :Approximately 884 Kg, 13 PassengersSpeed:1.0 Meter per secondType of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor.Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist wayTravel: Approximately 5.5 meter________Serving:_2 Floors _2 Stops_2 Openings_2 Levels (All on the same side)Hoist way Required: 2050mm (Wide) x 2500mm (Deep) Clear dimensionsHeadroom Height (HR): 5000 mm beyond finished floor level of last landing Pit Depth: 1600mm below the finish floor level of first landing Car Size Area: Minimum 2.06 square meter and Maximum 2.20 square meter Car Enclosure: Constructed out of stainless steelScratch proof Finish (Vandal Proof).Car Entrance: Center Opening Automatic Doors with vision panel (40% area should be visible by glass) of Stainless steel finish panel in Scratch Resistance/ Vandal proof with a clear opening of 900mm (wide) x 2000mm (high) Door operation: Automatic DC Door operation with adjustable door opening and closing timings Control: Simplex full selective collective control with and without attentdentOperation: Automatic Power Supply: 415 Volts, 3- phase, 50Hz Alternating CurrentFlooring: Floor Skid - Resistant as per standardFan: Blower Fan in Car for ventilation with Auto cut offLighting: LED for Car LightingIndicators: LED Dot matrix / Digital 3 segement direction and position indicators in the car and at all landings Hand Rail: Stainless Steel round Hand rail not less than 600mm long at 900mm above floor level (Side LH,Side RH & Rear) Call Button Height: Call button (Outside the lift) placed at a height between 800mm-1meter from the floor level Control Panel Height: Control panel placed at a height between 800mm-1meter from the floor level Std. Govt. features.
2670	Other Features:1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons5. Door Open and Close buttons6. Emergency Intercom provided inside the elevator7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication9. Steel items, door frames sill angle\"s, fascia plates, spring buffers10. Automatic phase reversal device and Phase Failure protection11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level\"s in english language only and indication of door for entrance / exit is .either Open or Close19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.28. The provision of mirror on the wall of the lift car opposite the lift door not extend below 900mm from the lift floor to avoid confusing people with impaired sight.29. The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids.30. Elevator must compulsoy with the letterconstruction as desired in the disability set.Make: Otis, Schindler, Kone, Mitshubishi
2671	ZONE-4 ICONIC TOWER:
2672	Supply, installation, testing and commissioning of 1 No. lift of 13 passengers machine room less.Type and Capacity :Approximately 884 Kg, 13 PassengersSpeed:1.0 Meter per second to 1.5 Mtr. per Second Type of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor.Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist wayTravel: Approximately 44 meter________Serving:_12 Floors _12 Stops_12 Openings_12 Levels (All on the same side)Hoist way Required: 2050mm (Wide) x 2500mm (Deep) Clear dimensionsHeadroom Height (HR): 5000 mm beyond finished floor level of last landing Pit Depth: 1600mm below the finish floor level of first landing Car Size Area: Minimum 2.06 square meter and Maximum 2.20 square meter Car Enclosure: Constructed out of stainless steelScratch proof Finish (Vandal Proof).Car Entrance: Center Opening Automatic Doors with vision panel (40% area should be visible by glass) of Stainless steel finish panel in Scratch Resistance/ Vandal proof with a clear opening of 900mm (wide) x 2000mm (high) Door operation: Automatic DC Door operation with adjustable door opening and closing timings Control: Simplex full selective collective control with and without attentdentOperation: Automatic Power Supply: 415 Volts, 3- phase, 50Hz Alternating CurrentFlooring: Floor Skid - Resistant as per standardFan: Blower Fan in Car for ventilation with Auto cut offLighting: LED for Car LightingIndicators: LED Dot matrix / Digital 3 segement direction and position indicators in the car and at all landings Hand Rail: Stainless Steel round Hand rail not less than 600mm long at 900mm above floor level (Side LH,Side RH & Rear) Call Button Height: Call button (Outside the lift) placed at a height between 800mm-1meter from the floor level Control Panel Height: Control panel placed at a height between 800mm-1meter from the floor level Std. Govt. features.
2673	Other Features:1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons5. Door Open and Close buttons6. Emergency Intercom provided inside the elevator7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication9. Steel items, door frames sill angle\"s, fascia plates, spring buffers10. Automatic phase reversal device and Phase Failure protection11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level\"s in English / Regional language only and indication of door for entrance / exit is .either Open or Close19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.28. The provision of mirror on the wall of the lift car opposite the lift door not extend below 900mm from the lift floor to avoid confusing people with impaired sight.29. The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids.30. Elevator must compulsoy with the letterconstruction as desired in the disability set.Make: Otis, Schindler, Kone, Mitshubishi
2674	XLPEINSULATED UN-ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
2675	Overall size 16sq.mm (4Core) Un-armoured (Loose)
2676	XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
2677	Overall size 16sq.mm (4Core) Un-armoured (On-Surface)
2678	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
2679	Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
2680	COPPER EARTHING (8 SWG COPPER EARTHING): Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
2681	Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
2682	Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
2683	MCCB\"s (MOULDED CASE CIRCUIT BREAKER):Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD General Specifications (Electrical Works) complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc.
2684	MCCB Four Pole 40amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting
2685	MS SHEET ENCLOSURE FOR MCCB\"s:Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shallbe made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/topwith cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:-
2686	MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)
2687	PROVIDING SOLAR POWER GENERATION SYSTEM:
2688	Supply, Installtion testing & commissioning of Grid Interactive PV System Solar Power Plant (i.e connected to utility grid) of Minimum 19KWp including required quantities of SPV modules (Hight Power density Perc Bifacial Mococrytalline based) formed in to arrays, their mounting arrangement, Power conditioning units (i.e string Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board throughcable tray Bi Directional Energy Meter required Earthing (i.e2 Nos GI strip earthing for GI Strcuture, 2 Nos GI Strip earthing for string inverter, AC & DC Distribution system) ESE stroke master (As per NFC 17 102 standard with suitable radius of protection) & 3 Nos chemical earthing with copper bonded rods along with high rise GPSP structure (Rated wind speed 170Kph) including mounting height up to 8 feet complete with transportaion, fabrication labour & civil work.Features: 1. Solar PV Module warranty 25 Years & certified under IS/IEC 61730 I & II IS/IEC 61701 & IS/EC 142862. Power Conditioning unit (string solar inverter) & certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 605293. Structure 25 Years service life with AMC & certified under IS 2062 20114. Complete Plant insurance for the period of 5 Years (Excluding Theft of the Material)5. Annual Maintenance contract for the period of 5 YearsMake:1 Solar PV Module: EMBRO, VIKRAM, ADANI, WAREE2 Power Conditioning Unit: KEHUA, DELTA, LUMINOUS, SOLAX, TESA3 AC/DC Distribution Board: EMBRO, ABB, SCHNEIDER ELECTRIC, HAVELL\"S4 Fusion Mount structure: TATA GALVUME, POSMAC5 ESE Stroemaster with chemical Earthing: SABO, JMC, TP, HIGH GRIDThe work will got done from approved MNRE (Misitry of New and Renewable Energy) / PEDA (Punjab Energy Development Agency) contractorThe capacity of solar power plant may increase or decrease as availability of site it can also be totally removed by concerned Engineer-in-charge of work..The Rate are inclusive of all taxes including GST.
2689	Add extra cost of Cutlural Cess @ 1%

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work, Garhshanker-Punjab

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work Construction Of Siri Guru Ravidass Memorial At Khuralgarh Sahib, Tehsil Garhshanker, District Hoshiarpur Balance Work, Garhshanker-Punjab

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us