Military Engineer Services-MES has published Repairs To External Water Supply Lines And Allied Works At Rhenock And Rongli Under Ge 867 Ews Repairs To External Water Supply Lines And Allied Works At Rhenock And Rongli Under Ge 867 Ews. Submission Date for this Tender is 18-11-2021. Water Pipe Line Tenders in Rhenock Sikkim. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&L for Cleaning of semi under ground water sumps of 50,000 Glns capacity by removing residual/balance water, taking out solid residual loose dirt, scales, mud, fungus, vegetation growth, scrubbing the complete inner surface of wall and floor with wire brushes and cleaning with water and again cleaning and washing completely using bleaching powder and fresh water, drying the entire surface and applying two coats of lime wash internally and writing the date of cleaning on external surfaces with thick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) complete all as directed by the Engineer-in-Charge. |
| 2 | All as per item No. 1 above but 10, 000 Glns capacity |
| 3 | All as per item No. 1 above but 5, 000 Glns capacity |
| 4 | M&L for disconnecting existing PVC water tanks of capacity 2000 ltrs, setting aside (or lowering if requried) cleaning and removing all scale & dirt etc.,from tanks and mouths of circulating pipes etc., by using bleaching powder and writing/marking MES Number and date of cleaning on external surfaces withthick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) and hoisting if requried, re-connecting and re-fixing in position complete all as specified and directed by the Engineer-in-Charge. |
| 5 | All as per item No 4 above but PVC water tank of capacity 1000 ltrs. |
| 6 | All as per item No 4 above but PVC water tank of capacity 500 ltrs. |
| 7 | All as per item No 4 above but PVC water tank of capacity 250 ltrs. |
| 8 | M&L for construction of Valve chamber of internal dimension/size 600 x 600 x 600 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC 1:3:6 type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar 1:6, with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar 1:6, finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level.) |
| 9 | M&L for construction of Valve chamber of internal dimension/size 900 x 900 x 900 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC 1:3:6 type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar 1:6, with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar 1:6, finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level.) |
| 10 | S&F gun-metal, globe or gate valves ofwith iron wheel head, screwed both ends for iron pipe of 15 mm dia bore and fixed including taking down existing unserviceable valve complete all as specified and directed by the Engineer-in-Charge. |
| 11 | All as per item No. 10 above but 20 mm dia bore. |
| 12 | All as per item No. 10 above but 25 mm dia bore. |
| 13 | All as per item No. 10 above but 40 mm dia bore. |
| 14 | All as per item No. 10 above but 50 mm dia bore. Make for Item No. 10 to 14: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE. |
| 15 | Supply only Aquafit brand Calcium Hypo Chloride with 65% to 70% Chlorine content in grangular and tablet form complete all as specified and as directed by Engineer-in-Charge. Make : M/S Sree Rayalaseema Hi- Strength Hypo Ltd or equivalent make as approved by GE. |
| 16 | Supply and fixing Rotational moulded polyethylene water storage tank cylindrical vertical double layered, 2000 ltrs capacity with closed top with and including nipples hoisted and fixed in position all as specified in SSR Part I including taking down existing water tank complete all as specified and directed by Engineer-in-Charge. |
| 17 | All as per item No. 16 above but 1000 ltrs capacity. |
| 18 | All as per item No. 16 above but 500 ltrs capacity. |
| 19 | All as per item No. 16 above but 250 ltrs capacity. Make for Item No. 16 to 19: SINTEX/ INFRA/ GP/ ROTEX/ ORIPLAST/ ASHISH/ POLYCON or equivalent ISI marked make as approved by GE. |
| 20 | S&F 15 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures complete laid in trenches or on ground including taking up or down existing water tubing and connections complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately. |
| 21 | All as per item No. 20 above but 20 mm dia bore. |
| 22 | All as per item No. 20 above but 25 mm dia bore. |
| 23 | All as per item No. 20 above but 40 mm dia bore. |
| 24 | All as per item No. 20 above but 50 mm dia bore. |
| 25 | All as per item No. 20 above but 80 mm dia bore. |
| 26 | All as per item No. 20 above but 100 mm dia bore. Make for Item No. 20 to 26: TATA/ ZENITH / JINDAL |
| 27 | M&L for taking up or down existing 15 mm dia bore water tubing and connections and cleaning & re-laying with and including new ISI marked pipe fittings, in new or old position in trenches, floors, etc., or fixed to wall complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately. |
| 28 | All as per item No. 27 above but 20 mm dia bore. |
| 29 | All as per item No. 27 above but 25 mm dia bore. |
| 30 | All as per item No. 27 above but 40 mm dia bore. |
| 31 | All as per item No. 27 above but 50 mm dia bore. |
| 32 | All as per item No. 27 above but 80 mm dia bore. |
| 33 | All as per item No. 27 above but 100 mm dia bore. |
| 34 | S&F 80 mm bore cast Iron sluice valve, PN 1.6, ISI marked, both ends flanged, with iron wheel, stainless spindle complete with jointing materials, nuts, bolts, washers and rubber gasket etc., including Disconnecting and taking out the old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. Make:- ZOLOTO Art No. 1079B of 80mm or equivalent model of SCUD/ KARTAR/ DURGA/ KIRLOSKAR or equivalent ISI marked make as approved by GE. |
| 35 | Excavation in trenches ,n.exe 1.5m wide and n.exe 1.5m deep forfoundation, laying of pipes etc., or for shafts, wells, cesspits, manholes etc., n.exe 10 sqm on plan and n. exe 1.5 m in depth and getting out in soft/ loose soil complete all as directed by Engineer-in-Charge. |
| 36 | Returning, filling in soil, including spreading leveling, watering and well ramming in laying not exceeding 25 cm thick complete all as directed by Engineer-in-Charge. |
| 37 | Removing excavated soil to a distance n.exe 50m and depositing where directedat a level n.exe 1.5m above the starting point complete all as directed by Engineer-in-Charge. |
| 38 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed byEngineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL/NEROLAC |
| 39 | Excation in post holes (or simillar holes) in soft/loose soil, each not exceeding 0.5 cum, getting out, and removing surplus soil to a distance not exceeding 50 mtr and making good surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Cutting the existing pipe line of size 40 or 50 mm dia for additions or alterations (each cut measured) including required accessories (such as insert, tee, reducer, socket and all other accessories) required as per site condition complete all as directed by Engr in charge. |
| 41 | Cutting and screwing the existing pipe line of size 25 mm dia for additions or alterations (each cut measured) including required accessories (such as insert, tee, reducer, socket and all other accessories) required as per site condition complete all as directed by Engr in charge. |
| 42 | S&F PVC cover for polythene water storage tanks of 2000 capacity of different make like sintex/polycon/Titaki etc, with suitable nuts, bolts and locking arrangement incl removing the broken unserviceable cover complete all as specified and directed byEngineer-in-Charge. |
| 43 | S&F PVC cover for polythene water storage tanks of 1000 capacity of different make like sintex/polycon/Titaki etc, with suitable nuts, bolts and locking arrangement incl removing the broken unserviceable cover complete all as specified and directed byEngineer-in-Charge. |
| 44 | S&F PVC cover for polythene water storage tanks of 500 capacity of different make like sintex/polycon/Titaki etc, with suitable nuts, bolts and locking arrangement incl removing the broken unserviceable cover complete all as specified and directed byEngineer-in-Charge. |
| 45 | S&F Symet ball valve 25 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 25 mm 455 gms, including taking down existing unserviceable ball valve complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F Symet ball valve 20 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 20 mm 210 gms, including taking down existing unserviceable ball valve complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F Symet ball valve 15 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 15 mm 142 gms, including taking down existing unserviceable ball valve complete all as specified and directed by Engineer-in-Charge. Make for Item No. 45 to 47:- PRAYAG/POLYTUFF or equivalent as approved by GE. |
| 48 | M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing block masonry complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalnt as approved by GE. |
| 49 | M&L for PCC 1:3:6 Type C-2 (Using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, pillars for support of pipes complete all as specified and as directed by Engineer-in-Charge. |
| 50 | M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-in-charge. |
| 51 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr-in-charge. |
| 52 | M&L for preparingnewly plastered surfaces ofwalls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE. |
| 53 | M & L Fe 290 Gde -E-165 mild steel angles or tees etc., as in staging of water tanks with web and flanges cut to shape, drilled and counter-sunk for screw, including bending and weilding angles as necessary , gusset plates, riveting etc, n exc 10 kg each brackets including taking down existing steel work complete all as specified and as directed by Engineer-in-Charge. |
| 54 | M&L for preparation of new or previously un treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL |
| 55 | Cutting of PCC making holes inserting GI pipe and making good disturbed surface. complete all as directed by Engr-in-charge. |
| 56 | S&F 40 mm dia butterfly Valve, lever operated, conforming to IS 13095 of class PN 1.6, with flanged ends, suitable for connecting with GI Pipe medium grade, with necessary nut-bolts and washers etc including taking down existing unserviceable valve complete with flanges nut - bolts etc., all as specified and directed. |
| 57 | S&F 50 mm dia butterfly Valve, lever operated, conforming to IS 13095 of class PN 1.6, with flanged ends, suitable for connecting with GI Pipe medium grade, with necessary nut-bolts and washers etc including taking down old unserviceable valve complete with flanges nut - bolts etc., all as specified and directed. Make for Item No. 56&57: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE. |
| 58 | M&L for collecting sample of raw water from any location at Rhenock and Rongli military stations and testing of water at local PHE department laboratory and submitting the report to MES completeall as specified and directed by Engineer-in-Charge. |
| 59 | Sub Total of Schedule "A" |
| 60 | Schedule of Credit (Minus) Rs.54,675.00 B/F from Ser page No. 26 NOTE: Bidder shall insert credit amount as rate Rs. 54,675.00 in Green field under Col-M.If bidder does not insert the amount the same will be deducted from total amount of Schedule "A" and accordingly total amount of tender will be considered in deciding the lowest tender. |
| 61 | Sub Total of Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
