Repainting Of Administrative Office Building And Other Minor Civil Works Repainting Of Administrative Office Building And Other Minor Civil Works
Tender Value
30.99 Lakhs
Estimated cost
Bid Submission
22 Nov 2021
0 days left
EMD
46500
Bank guarantee accepted
Document Fee
3095
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kerala University of Health sciences → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repainting Of Administrative Office Building And Other Minor Civil Works Repainting Of Administrative Office Building And Other Minor Civil Works
BOQ
| Sl. No. | Item Description |
| 1 | Wall painting Acrylic Smooth exterior paint of required shade One or more coats on old work |
| 2 | cleaning structural glazing and acp using cleaning solution(dfw technology if required) includingscaffolding charge, material and conveyance etc all complete for all levels |
| 3 | Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:Oneor more coats on old work |
| 4 | supply of toughened evolite green 6mm ET450 glass of size 1.1 x .8 m including conveyance charge etcall complete as per directionEngineering |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers notexceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 mand lift up to 1.5 m. |
| 6 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting andsetting in position with cement mortar 1:3 ( 1 cement : 3 coarse sand), cost of required centering,shuttering complete:1:1.5:3 ( 1 cement : 1.5 coarse sand (Zone III): 3 graded stone aggregate 20 mmnominal size) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) |
| 8 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases ofcolumns, etc for mass concrete |
| 9 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 10 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting thesame with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of thefloor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.) |
| 11 | engaging Fitter (grade 1) |
| 12 | engaging beldar |
| 13 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium CompositePanel Cladding(ACP), with open grooves for linear as well ascurvilinear portions of the building , for all heightsand all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to makeit water tightincluding checking of all the structural and functional design.b) Providing, fabricating and supplying andfixing panels of ACPcladding in pan shape in metalic colour of approved shadesmade out of4mm thick ACP material consisting of 3mm thick FR grademineralcore sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panelcladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resincoating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specifiedusingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) Thefastening brackets of Aluminium alloy6005T5/MS with Hot Dip Galvanisedwith serrations and serratedwashers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make inSS 316,Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mockups at site, cost of all samples of the individual components for testing inanapproved laboratory, fieldtests onGalvanisedwith serrations and serratedwashers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make inSS 316,Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mockups at site, cost of all samples of the individual components for testing inanapproved laboratory, fieldtests on theassembled working curtain wall with ACPcladding, cleaning and protection of the curtain wallwith ACP cladding till the handing overof thebuildingforoccupation. Base frame work for ACP cladding is payable under the relevant aluminium itemsThe Contractor shall provide curtain wall with ACP cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, asper theapproved shop drawings and as directed by the Eng-in-Chrg.However, for the purpose ofpayment, only the actual area on the external face ofthe curtain wall with ACPCladding (including width ofgroove) shall be measured in sqm. up to two decimal places. theassembled working curtain wall with ACPcladding, cleaning and protection of the curtain wallwith ACP cladding till the handing overof thebuildingforoccupation. Base frame work for ACP cladding is payable under the relevant aluminium itemsThe Contractor shall provide curtain wall with ACP cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, asper theapproved shop drawings and as directed by the Eng-in-Chrg.However, for the purpose ofpayment, only the actual area on the external face ofthe curtain wall with ACPCladding (including width ofgroove) shall be measured in sqm. up to two decimal places. |
AI Tender Summary
Tender Timeline
Oct 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender