Delhi Development Authority-DDA has published M / O Yamuna Sports Complex. Replacement Of Various Type Of Feeder Pillar And Lighting For Jogging Track At Yamuna Sports Complex.. Submission Date for this Tender is 13-11-2021. Electrification Work Tenders in As per Tender Documents Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Nov-2021 | Modification in NIT | Other | 08-11-2021 |
| 2 | 08-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-11-2021 |
| Sl. No. | Item Description |
| 1 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantled Street light Panelshall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 63 Amps, TPN, MCCB (25kA)with Handle. ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1 Set of push buttons for ON/ OFF and selective switching operation iv) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). v) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos. CT"s of ratio 50/5 A. vi) Bus BAR: Aluminium bus (20 x 5)- 1Set of four bus bars vii) 1 No.63A TP Power Contactors B) OUTGOINGS:- i) 32A DP MCB - 24 Nos. Digital Timer-1 No. Total as Above |
| 2 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantledGATESPanel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 63 Amps, TPN, MCCB (25kA)with Handle ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). iv) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos.CT"s of ratio 50/5 A. v) BusBAR: Aluminium bus (20x5). - 1Set B) OUTGOINGS:- vi) 40 AMP MCB DP - 01 No. vii) 40 AMP MCB 4P - 02 Nos. viii) 16 AMP MCB DP - 01 No. ix) Total as Above |
| 3 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantled 5HP Submersible pump Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i)63 Amps, TP, MCCB (25KA) with Handle 1 Nos. ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1 Set of push buttons for ON/ OFF and selective switching operation iv) 1No. 0 to 500V, AC, Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). v) 1 No. 0 to 25A, Ammeter with Selector switch & 3 nos.CT"s of ratio 25/5 A. B) OUTGOINGS:- vi) Upto 5 H.P DOL Starter with Contactor & SPPR etc.with 6.3-10 Amps TPMCB vii) 40 Amp Isolator, TP, - 1 No. viii) 32A DP MCB - 2 Nos. ix) Total as Above |
| 4 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantled 7.5HP Submersible pumpPanel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 63 Amps, TP, MPCB (25KA) with Handle. 1 Nos ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1 Set of push buttons for ON/ OFF and selective switching operation iv) 1No. 0 to 500V, AC, Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). v) 1 No. 0 to 63 A, Ammeter with Selector switch & 3 nos.CT"s of ratio 50/5 A. B) OUTGOINGS:- vi) 7.5 H.P S/D Starter with Contactors, SPPR, S/D Timer etc.(with 20 AmpsTPMCCB 25KA with handle.) vii) 40 Amp Isolator, TP, - 1 No. viii) 32A DP MCB - 2 Nos. ix) Total as Above |
| 5 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantled10 HP Submersible pump Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 63 Amps, TP, MPCB (25kA) with Handle. ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1 Set of push buttons for ON/ OFF and selective switching operation iv) 1No. 0 to 500V, AC, Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). v) 1 No. 0 to 63 A, Ammeter with Selector switch & 3 nos.CT"s of ratio 50/5 A. B) OUTGOINGS:- vi) 10 H.P S/D Starter with Contactors, SPPR, S/D Timer etc.with 1 No 25 Amps, TP, MPCB (25kA) with Handle vii) 40 Amp Isolator, TP, - 1 No. viii) 32A DP MCB - 2 Nos. ix) Total as Above |
| 6 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantledCourt Light Panel -1 Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 63 Amps, TPN, MCCB (25kA) with Handle ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iv) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). v) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos. CT"s of ratio 50/5 A. vi) Bus BAR: Aluminium bus (20 x 5)- 1Set of four bus bars B) OUTGOINGS:- vii) 32A DP MCB - 15 Nos. viii) Digital Timer-1 No. ix) Total as Above |
| 7 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantleddismantled T T Building Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 160 Amps, 4P, MCCB (25kA) with Handle ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1 Set of push buttons for ON/ OFF and selective switching operation iv) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). v) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 Nos.CT"s of ratio 50/5 A. vi) BusBAR: Aluminium bus (40 x 5). - 1Set B) OUTGOINGS:- vii) 32 Amp DP MCB - 24 Nos. viii) Digital Timer-1 No. ix) Total as Above |
| 8 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantledCourt Light Panel -2 Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 63 Amps, TPN, MCCB (25kA) with Handle ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). iv) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos. CT"s of ratio 50/5 A. v) Bus BAR: Aluminium bus (20 x 5)- 1Set of four bus bars B) OUTGOINGS:- vi) 32A DP MCB - 20 Nos. vii) Total as Above |
| 9 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantledHockey light Panel Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 100 Amps, 4 Pole, MCCB (25kA)with Handle. ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). iv) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos. CT"s of ratio 50/5 A. v) Bus BAR: Aluminium bus (20 x 5)- 1Set of four bus bars B) OUTGOINGS:- vi) 20A DP MCB - 8 Nos. vii) 20 Amps, TPN MCB- 24 Nos viii) Total as Above |
| 10 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantledMain Hockey PanelPanel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 320 Amps, 4 Pole, MCCB (25kA)with Handle. ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). iv) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos. CT"s of ratio 350/5 A. v) Bus BAR: Aluminium bus (50x6)- 1Set of four bus bars B) OUTGOINGS:- vi) 100 Amps, 4 Pole, MCCB (25kA)- 6 Nos. vii) Total as Above |
| 11 | SITC of outdoor type cubical Feeder pillar fully compartmentalized Power Painted made out of 2 mm thick CRCA Sheet having IP55 protection with canopy, MS angle frame at bottom with 750 mm long legs (450 mm underground & 300mm above ground) made out of 40X40X5 mm thick a MS angle Iron mounting, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painted with 7 tank process of approved shade, suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick with suitable size knock outs for different size incoming and outgoing cables entry, i/c dismantling of existing panel with foundation, opening of existing cable connections of different size taking out loop for reconnections of cables and digging(the existing old foundation) for new foundation etc. and reconnection of cables in the new panel erected on existingcement concrete foundation made, complete with painting the foundation with approved paint and interconnections, earthing etc. complete as required. The complete item shall be as per specification and additional condition attached, complete etc. as required.(The dismantledHockey UPS Panel shall be property of agency and agency quote accordingly i/c rebate for old Panel). A) INCOMER i) 1 No 63 Amps, 4 Pole, MCCB (25kA)with Handle. ii) 1 Set phase indication lights (R,Y,B) Solid state type (LED). iii) 1No. 0 to 500V, AC, Digital Volt Meter with Selector switches & (3 Nos. 2 Amps MCB). iv) 1 No. 0 to 63 A, Digital Ammeter with Selector switch & 3 nos. CT"s of ratio 50/5 A. v) Bus BAR: Aluminium bus (20 x 5)- 1Set of four bus bars B) OUTGOINGS:- vi) 20A DP MCB - 8 Nos. vii) 20 Amps, TPN - 8 Nos viii) Digital Timer-1 No. ix) Total as Above |
| 12 | Supplying ofPVC insulated and PVC sheathed /XLPE Alumunium Armouredpower cable of 1.1 KV grade direct in ground including making connections with suitable size of aluminum lugs, testing etc. complete as required. |
| 13 | 2 x10 sq.mm |
| 14 | 2 x 16 Sqmm |
| 15 | 3.5 x 50 Sqmm |
| 16 | 3.5 x 25 sq.mm |
| 17 | Supplying, Installation, Testing and Commissioning of 40-45 watt LED Post top Luminaire with Die- castaluminium graphite grey powder coated spigot and spunaluminiumbody with clear/ opal diffuser IP-65 protection, driver with all accessoriesi/c connection, testing etc. complete as required, as per technical specification attached. |
| 18 | Making trench less under ground hole across the road /pavements/cement concret pathway at adepth of about 1 meter by means of manual augourto drawing the pipe (up to 100 mm dia )/cable i/c making excavation on both side of road /pathway for making trenchless hole & refilling the same with excavated earth /soil after laying pipe /cable through trench less i/c proper ramming dressing, watering as perinstructionof engineer-in-charge etc as required. |
| 19 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 20 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal/ coke and salt as required. |
| 21 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 22 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 23 | Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 24 | Supplying, Installation, Testing and Commissioning of 8-10 watt LED Bollard with 1 Mtr heightwith all accessoriesi/c connection, excavation for foundation, testing etc. complete as required, as per technical specification attached. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
