Replacing Existing Hdpe Water Distribution Line From South Side Of Dawadmla Phata To Ambethan Chowk At Ward No 1 13 14 By New Hdpe Pipe Line For Chakan Muncipal Council Chakan Tal Khed Dist Pune
Tender Value
37.65 Lakhs
Estimated cost
Bid Submission
08 Nov 2021
0 days left
EMD
55000
Bank guarantee accepted
Document Fee
3300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chakan → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacing Existing Hdpe Water Distribution Line From South Side Of Dawadmla Phata To Ambethan Chowk At Ward No 1 13 14 By New Hdpe Pipe Line For Chakan Muncipal Council Chakan Tal Khed Dist Pune
BOQ
| Sl. No. | Item Description |
| 1 | Replacing Existing H.D.P.E. Water Distribution line from South Side of Dawadmla Phata to Ambethan Chowk at Ward No-1,13,14 BY NEW HDPE PIPE LINE , For Chakan Muncipal Council Chakan, Tal. - Khed Dist. - Pune. |
| 2 | Item No.1 :- 160 mmdia.HDPE 6 KGProviding and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release couplejoint / compression fitting joint or flanged joint excludingCoupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete Note:- H.D.P.E. Pipes shall be as per latest ISSpecifications Also HDPE pipes upto 110 mmDia shall be in coil form |
| 3 | Item No.2 :-Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. i) HDPE Couplers 160 |
| 4 | ii) HDPETee 160 X 90 |
| 5 | iii) HDPE TEE 160 X 110 |
| 6 | iv) Elbow 90 Deg.160 |
| 7 | iv) End Cap 160 |
| 8 | V) HDPE STUB END 160 MM |
| 9 | Item No.3:-Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/EDPM gaskets, Nuts, Bolts, Washers and Ductile ironfollower glands. Fittings should be with internally Ordinaryportland cement mortor lined and externally metallic zinccoating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutaryduties and taxes such as GST levied by Gol and GoM in allrespect etc. complete. MJ Collar/Coupling 150 MM |
| 10 | Item No.4 :-Providing double flange sluice valve conffirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. 150 mm DiaPN 1.0 |
| 11 | Item No.5:-Providing andsupplying Air Valves as per IS-14845-2000andMJP’sstandard specificationsdoubleorificetypecombined with isolating sluice valve, mounted in horizontalpositionandoperatedbywheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inletfaceanddrilled,includinginsurance, third party inspection charges, loading, unloading,transportationupto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm Dia |
| 12 | Item No.6 :-Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft2.70 M long over branch flange of air valvetee, providing PCC block of M-150 concrete,150mmthickaroundtheairvalvetee including encasing of vertical shaft in PCC M-150 as shown in type design togetherwith providing and making flanged joints wherever requiredandfixingofairvalvetee,etc. complete as per type design and as directed by Engineer -in- charge for following diametersof pipe lines (type design attached.)up to 150 mm-foundation on murum & harder strata |
| 13 | Item No. 7 :-Providing and fixingC.I.roadboxincluding loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete.Size -225 mm x 300 mm (40 kg) |
| 14 | Item No.8:- Providing and supplying in standard lengthsISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays andrains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).i) P.V.C. 90 mm 6 kg/ sq.cm. |
| 15 | i) P.V.C. 110 mm 6 kg/ sq.cm. |
| 16 | B) LABOUR Item No.9 :- Excavation for foundation / Pipe trenches in sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling.etc. complete. Lift 0 to 1.50 M |
| 17 | Item No.10 :-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift 0 to 1.50 M |
| 18 | Item no 11:- Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift 0 to 1.50 M |
| 19 | Item No.12 :- Filling in plinth and floors murumbedding in trenches with approved murum from excavated materials from foundation 15 to 20 cm layers including watering and compaction etc. complete. |
| 20 | Item No.13 :- - 160 mmdia.HDPE 6 KGLowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 21 | Item No. 14 :- 150 mmdia. Lowering, laying and jointing in position following C.I. D/F Sluice valves & washout valve including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. |
| 22 | Item No. 15 :- Providing and castingin situ, following grades of cement concrete of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compacting and curing, etc. Complete P.C.C. M-100 |
| 23 | Item No. 16 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 24 | Itam No.17150 MM DIAMaking cross connection to existinq distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) |
| 25 | Item No. 18 :-Hydraulic testing of H. D. P. E./ M. D. P. E.pipe line to specified pressure including cost ofall materials and labour and water for testing forspecified length including cutting, placing endcap making arrangement for filling safe waterusing reciprocating type pumps which should beable to provide specified test pressure gaugesand other necessary equipments, labour,operation charges, etc. required for testing. Therate under this item shall also include cost ofretesting, if necessary and reinstating to originalposition |
| 26 | Item no 19 :-Providing and making flanged joints to flanged C.I./M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete. 150 mm |
| 27 | 100 mm |
| 28 | 80 mm |
| 29 | Add 12% GST |
| 30 | Total Amount |
AI Tender Summary
Tender Timeline
Oct 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender