Tender For Fabrication And Replacement Of Drain Pots Of Gas Pipeline -, ROURKELA-Odisha

Tender For Fabrication And Replacement Of Drain Pots Of Gas Pipeline -FABRICATION,TESTING,PAINTING,ERECTION,DISMANLING OF DRIP POTS USED IN GAS LINES AS PER DET-AIL SCOPE OF WORK GIVEN BELOW:(1FABRICATION,ERECTION AND REPLACEMENT OF DRIP POTS IN GAS LINES INSTALLEDAT DIFFERENT LOCATIONS ALONG YARD GAS GRID.(2)DRIP POTS ARE TO BE FABRICATED AND TESTEDAS PER RSN/SKETCH TO BE PROVIDED BY THEEXECUTING OFFICER.3) DRIP POTS SHALL BE FABRICATEDERECTED/INSTALLED AS PER DIRECTION OFTHE EXECUTING OFFICER.(4ALL ERECTEDDRIP POTS WITH FITTINGS ETC.ARE TO BEPAINTED WITH ONE COAT OF PRIMER PAINT AND ONECOAT OF ALUMINIUM PAINT AS PER DIRECTIONOF EXECUTING OFFICER.SUPPLY OF REQUIRED PAINTOF APPROVED QUALITY IS INCLUDED IN TENDERERSSCOPE OF WORK.(5MATERIALS SUCH AS MS PLATESMS PIPES,VALVES,NUTS/BOLTS,GASKETS OF REQUI-RED QUANTITY WILL BE ISSUED TO THE TENDERERAS FREE ISSUE MATERIAL FROM STORE.(6)THE SCOPE OF WORK OF THE CONTRACTOR SHALLALSO INCLUDE TRANSPORTATION,GAS CUTTING,MACH-INING AND DRILLING OF REQUIREDNOS.SLIP-ONFLANGES OF SIZE NB80,NB50&NB25 AS PER RSN.EACH DRAIN POT SHALL BE FITTED WITH ONE NB80,TWO NB50 AND TWO NB25 FLANGES AS PER RSN.(7)TRANSPORTATION OF ALL REQUIRED MATERIALFROM STORE TO SITE OF WORK IS THERESPONSIBILITY OF THE TENDERER.(8)AFTER COMP-LETION OF WORK,ALL DISMANTLED PIPES AND DEBR-IS GENERATED DURING EXECUTION OF WORK SHALLBE TRANSPORTED AND DISPOSED OFF BY THE TENDE-RER AT SSD OR AT LOCATION AS DIRECTED BY THEEXECUTING OFFICER SO AS TO LEAVE THE WORKSPOT CLEAN&SAFE.8)REPAIRABLE ITEMS/SALVAGABLE ITEMS ARE TOBE RETURNED BACK TO EMD AS PER DIRECTIONOF EXECUTING OFFICER.9)FABRICATION AND ERECTION OF CONDENSATE PIPETO THE DRIP POT,AND DRAIN PIPE FROM DRIP POTALSO INCLUDED IN THE SCOPE OF SUPPLIER.REQUIRED FLANGE AT THE ENDS TO BE MACHINED && FIXED.10)THE OLD DRIP POT &ITS PIPES FROM UGSVTO BE DISMANTLED AND NEW DRIP POT TO BEINSTALLED IN ITS PLACE.OLD ITEMS REMOVED FROMSITE TO BE HANDED OVER TO EMD OR DISPOSED OFFAS DIRECTED BY EXECUTING OFFICER.11)EMBOSSING/PUNCHING OF IDENTIFICATION SL.NOIN THE DRIP POTS TO BE DONE AS INDICATED INSPECIAL TERMS PAGE, DISMANTLING/FABRICATION/TRANSPORTATION/SUPPLYERECTION OF WATER LINE CONNECTION TO DRIP POTFROM THE NEAREST 1 INCH WATER SUPPLY POINTAND FIXING OF NEW BOW PIPE SIPHON IN THE DRIPPOT AS PER FOLLOWING SCOPE OF WORK:1.FABRICATION OF DRIP POT BOW PIPE AS PERSITE CONDITION&FUNNEL FROM NB:80 PIPE.2.REMOVAL OF DEFUNCT BOW PIPE SET AND ISOLATION OF WATER CONNECTION.FIXING OF NEW BOW PIPEIN THE DRIP POT AND CONNECT NEW WATER CONNECTION AS PER DIRECTION OF EXECUTING OFFICER.3.FIXING OF GATE VALVES 2NOS ONE ABOVE DRIPPOT AND ONE AT SOURCE AFTER MAKING NECESSARYTHREAD IN SUPPLY PIPE.4.REPAIRABLE BOW PIPE SETS ARE TO BE RETURNED BACK TO EMD PIPE LINE MAINTENANCE WORKSHOP,DAMAGED AND BEYOND REPAIR PIPES ARE TOBE DISPOSED/AS DIRECTED BY EXECUTING OFFICER.5.FIXING OF FLANGE ON THE BOW PIPE AND GASKETWITH FASTENERS AND CLAMPING IF ANY AS PERREQUIREMENT AT SITE/INSTRUCTIONOF EXECUTINGOFFICER.6.REQUIRED SEALANT AT THREADS ARE ALSO TO BESUPPLIED BY THE TENDERER.7:WATER LINE FITTING FOR EACH DRIP POT BOWPIPE FITTING:1GI NIPPLE:3,1BEND:3,1 GUNMETAL VALVE :2 NOS8.ALL MATERIALS AS INDICATED ABOVE ARE TO BEOF SUPPLIED BY THE PARTY.SUPPLIER TO ENSURETHERE IS NO LEAKAGE IN WATER LINE CONNECTIONMADE TO THE DRIP POT, etc.

Refer document

Refer document