Supply , installation , testing commissioning Of 02 No. 150 Ltr. Capacity Water Cooler, 4 Kva Steplizer 02 Nos, Construction Of Water Coolar Cage 02 Nos, G. I. Pipe Line Connection, Cabling Work At Nmy Tilhar (Distt. Shahjahanpur)
Tender Overview
Project Description
Supply , installation , testing commissioning Of 02 No. 150 Ltr. Capacity Water Cooler, 4 Kva Steplizer 02 Nos, Construction Of Water Coolar Cage 02 Nos, G. I. Pipe Line Connection, Cabling Work At Nmy Tilhar (Distt. Shahjahanpur)
BOQ
| Sl. No. | Item Description |
| 1 | Supplyof 150 Liter capacity Water Coolar of Usha make with Refrigarator R-22 havying cooling capacity 150 Liter with extra large stainless steel body with water tap 2 Nos complete in all respects. |
| 2 | Supply of 4 KVA copper wound Stabilizer range 140-280 with plug top complete in all respects. |
| 3 | S/F of 32 Amp 240 Volt SPN Metal Clad Rewirable type switch fuse unit on MDFEG/Teak wood boardcomplete in all respects. |
| 4 | Installation and Comissioning charges of Water Coolar incl. connection complete in all respects. |
| 5 | Construction of 2.00m x 1.50 m x 2.80 m Water Coolar Cage made out of 50x50x5mm M.S. angle iron with 10 SWG welded wire mesh of size 1”x2”galvanized G I Sheet of 24 SWG on roof, top and side to protect the coolar from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concretebase and brick work in1:6 cement and fine sand. The flooring of the cage should be 6” base concrete in the ratio of 1:6:12 and 4.00mm thick and plaster in 1:2:4 plain including painting with aluminium paints. The job includes supply of all materials, Labour T&P required for proper completion of work. (As per civil schedule Analysis) |
| 6 | S/F of wash out pipe of 40mm dia G. I. Pipe for wastage water drain from Water Coolar |
| 7 | S/F of brass stop cock of approved make complete in all respects. |
| 8 | S/F of 15mm dia G. I. Pipe complete with G. I. Fittings,clamps including all materials, Labour etc complete in all respects. |
| 9 | S/F of 25 mm dia G. I. Pipe complete with G. I. Fittings,clamps including all materials, Labour etc complete in all respects. |
| 10 | S/F of Brass Ferrul with C.I. Mouth Cover including 15mm dia nominal boring and tapping the mains complete in all respects. |
| 11 | S/burying of 40 mm dia x 4.5 metres long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I., wire and pipe/will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonry enclosure,funnel at top, alternate layers of charcol . coke and salt at least 150 mm thick al around etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 12 | S/fixing of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sandlabour. T & P required for proper completion of the work as directed at site. |
| 13 | S/fixing of power plug with 15A/250 V flush typemodular switchand 5 pin 15A/250 V flush type universal socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects |
| 14 | S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat B |
| 15 | S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat B |
| 16 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B |
| 17 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 10sqmm 2 core |
| 18 | (ii) 50sqmm 3.5 core |
| 19 | S/F of 63 Amp 4 pole change over switch on 40X40X6 mm angle iron frame including the cost of labour, T & P, painting and other materials required for proper completion of work as per direction and satisfaction of E/I |
| 20 | S/L of 50mm Dia B class GI Pipe on pole or in road with clamp etc. complete in all respects |
| 21 | Construction of M.S. cage for water tank of size 1.25mx1.25mx1.25m, covered with welded wire mesh alround. |
| 22 | Cement concrete with 2 cm gauge grit, ballast approved coarse sand and cement in the proportion of 4:2:1 includingsuppy ofall materials, labour and T&P etc. required for proper completion of work. |
| 23 | Supply and Hoisting ofsyntax or equivalent Make High Density Polyethylene sheenless moulded Tank and placing in position. The job is inclusive of all taxes, Labour, T&P and other material for proper completionof work as directedby Engineer in charge at site. |
| 24 | S/L of 100mm dia B Class G. I. Pipe in ground or on wall with elbow/bend/ socket as required at siteas per direction of E/I completein all respects. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender