Construction Of Multipurpose Hall For Marriage And Other Social Function At Chakujot, Bahraich
Tender Value
33.63 Lakhs
Estimated cost
Bid Submission
03 Nov 2021
0 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BAHRAICH → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Multipurpose Hall For Marriage And Other Social Function At Chakujot, Bahraich
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Nov-2021 | DATE CORR | Date | 03-Nov-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in exacavation in foundation in ordinary soil including lift upto 1.5 m and lead upto 30m. and dressing ofsides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i/c withina lead of 30 m. |
| 2 | SOIL filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. required for proper completion of work |
| 3 | Carted earth (8 Km)in trenches, plinth, sides offoundation, etc.in layersnot exceeding 20 cms in depth consolidating each deposited layer by ramming andwateringincluding lead upto 50m and lift upto 1.5m. |
| 4 | Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 1 Kms from the site of work and including watering dressing etc. required for proper completion of work |
| 5 | Providing and layingin cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded brick aggregate 40 mm nominal size) and curing complete, including cost ofform-work, in foundation and floors. |
| 6 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:2:4 (1 cement :2 coarse sand : 4 aggregates) , in lintels of doors and windows excluding supply of reinforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and alsoincluding supply of all materials labour and tools and plants etc. required for proper completion of the works.As above item but in R.C.C raft foundation and footing with 4cm (1/2\") guage approved stone ballast |
| 7 | Same as above item 6.0 but with 20mm guage approved stone grit in RCC T beam and slab roofs and RCC column |
| 8 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:2:4 (1 cement :2 coarse sand : 4 aggregates) , in lintels of doors and windows excluding supply of reinforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and alsoincluding supply of all materials labour and tools and plants etc. required for proper completion of the works. |
| 9 | As in item 8.0 above but in lighter Beams having spans upto above six meter |
| 10 | As in item 8.0 above but forSLAB |
| 11 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:1.5:3 (1 cement :1.5 coarse sand : 2 aggregates) ,columns excluding supply of rienforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and alsoincluding supply of all materials labour and tools and plants etc. required for proper completion of the works. |
| 12 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennotincludedin an over all rates )wroughtto required shape as necessary including bending for proper completion ofthe work andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level. |
| 13 | Class M 150 brick work in 1:6 cement and fine sand of1.25 F.M. mortar in foudation and plinth including and plinth including supply of all materials ,labour and T&P etc. required for proper complete of the work. |
| 14 | b/w in super-structure including necessary cuttingand moulding ofbrickworkas requiredandalsoincludinghoney combed brick work in thickness of wall one brickthick. 1:6 1 cement and 6 coarse sand mortar |
| 15 | Same as in item no. 14 but in 1:4 cement and coarse sand mortar in super structure for wall thickness 4.5\" thick . |
| 16 | 12 mm thick plaster with cement mortar in proportion of 1:6cement & coarse sand all material,labour etc comp. |
| 17 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 18 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand 2cm graded approved stone laid in panels finished with 3 mm in 5:1 as specifiled over & including 8cm thick base concrete conisting of cement local sand and brick ballast 4cm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials labour and T&P etc. required for proper completion of the work. and without base concrete. |
| 19 | Providing and laying Vitrified tiles600 x 600 (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Mild steel or iron work in heavy sizes such as trusses, built up gates, door frame, record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work HOLD FAST(45X45X6) |
| 22 | Mild steel or iron work in heavy sizes such as trusses, built up gates, door frame, record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work |
| 23 | ANGLE IRON DOOR CHAUKHATS (45*45*6) |
| 24 | M.S.FLUSHIRON DOORS 1MM THICK(20 GAUGE) SHEET WITH HANDLE & TOWER BOLT |
| 25 | Fixing of Door, windows/ventilators chaukhats in position. (a) Door chaukhats |
| 26 | Fixing of Door, windows/ventilators chaukhats in position.(b) Window chaukhats |
| 27 | Fixing of Door, windows/ventilators chaukhats in position.(c) Ventilator chaukhats |
| 28 | Painting or vanishing on iron work in small areas or new wood work with one cost of ready mixed priming paint and one coat of apporoved superoir quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work paint to be used should confirm to the ISI NO. 103 1950 PWD 641+642 |
| 29 | Providing & Applying Of White Cement Based Putty Of Aveage Thickness 1mm Of Approved Brand & Manufacture , Over The Plastered Wall Surface To Prepare The Surface Even Smooth Complete. but for every coat after the first coat |
| 30 | finishing walls with premium Acrylic Smooth Exterior Paint With silicone Additives of required Shade; new work(two or morecoats applied @1.43ltr/10sqm over and including priming coat of exterior primer coat Applied @ 2.20kg/10sqm)(apex Ultima, Wearther coat All quard) asian. |
| 31 | Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flushpipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size580x 440mwith integral type foot rests flush pipe and over flow arrangement. |
| 32 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. |
| 33 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. (a) 40mm dia |
| 34 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. |
| 35 | Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. |
| 36 | Providing & fixing soil, waste and vent pipes. (a) 100mm dia centrifugally cast iron S & S pipe. |
| 37 | Providing & fixing soil, waste and vent pipes. (b)75mm dia centrifugally cast iron S & S pipe. |
| 38 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. (a) 100mm |
| 39 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.(b) 75mm |
| 40 | Providing & fixing cast iron trap of self cleansing design with or without vent arm complete, including cost of cutting & making good the walls & floors. a) 100mm inlet & 75mm outlet. |
| 41 | Providing & fixingcast iron coller. (a) 100mm dia. |
| 42 | Providing & fixingcast iron coller. (b) 75mm dia. |
| 43 | Providing and fixing plaincast iron S & S sanitary bend.(a) 100mm dia. |
| 44 | Providing and fixing plaincast iron S & S sanitary bend. (b) 75mm dia. |
| 45 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.(a) 100mm dia. |
| 46 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.(b) 75mm dia. |
| 47 | Extra for providing & fixing 125mm dia C.P. grating in place of C.I. grating over floor traps. |
| 48 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work) Exposed on wall (for supply water to tank) (a)32mm dia nominal bore (medium duty B GRADE) |
| 49 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. (a) 15mm dia nominal bore |
| 50 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. (b) 20mm dia nominal bore |
| 51 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. (a) 15mm dia nominal bore |
| 52 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. (b) 20mm dia nominal bore |
| 53 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. (a) 15mm dia nominal bore |
| 54 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 (a) 15mm nominal bore short body & mixer |
| 55 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15mm nominal bore |
| 56 | Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). (a) 25mm. Nominal bore |
| 57 | Providing and fixing gun metal gate valve with wheel of approved quality. (a) 25mm dia nominal bore |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Capacity 1000 litre |
| 59 | Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore |
| 60 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. (a) Pipes 80mm to 300mm diameter. |
| 61 | Providing, laying and joining glazed stone ware pipes grade \"A\"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. (b) 150mm diameter |
| 62 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. (b) 150mm diameterS.W. Pipe |
| 63 | Providing and fixing square mouth S.W. Gully trap grade \"A\" complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm.size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. (a) 150 x 100 mm. size P type |
| 64 | Constructing brick masonry chamber for underground C.I. inspection kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 65 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 66 | Wiring point for light with 1.5sq mm FR P.V.C. insulated multistrand single core copper conductor cable in P.V.C. conduit with 1.5 sqm FR P.V.C. insulated multistrand copper conductorcable as earth wire drawn inside,piano type switch and ceiling rose on 3mm phenolic laminated bakelite sheet etc. |
| 67 | Same as in item no. 1 but for fans and Fresh Air fans (light duty fan). |
| 68 | Wiring point for plug with 1.0 sqmm FRPVCinsulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall , complete with 14SWG copper earth continuity wire, piano type switch and socket etc. complete in all respects including matching colour wash. Same as above wiring point for plugwith 1.0sq mm FR P.V.C. insulated multistrand single core copper conductor cableas earth wire drawn inside the conduit |
| 69 | Supply & wiring of sub-main with 2Nos of 6sqmm FRPVC insulated 1100V grade multistrand single core copper conductor cable in 20mm dia heavy gauge rigid steel conduit concealed in wall, complete with 1No. 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. Same as above but in 20mm dia heavy duty( 2mm thick) PVC conduit with 1No. 2.5 Sqmm. FRPVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit. (Lumpsum quantity has been taken in consideration) |
| 70 | Same as above but in 20mm dia heavy duty( 2mm thick) PVC conduit with 1No. 2.5 Sqmm. FRPVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit. (Lumpsum quantity has been taken in consideration) |
| 71 | Supply and Fixing of 32 A 240 V DP metal clad rewireable type switch fuse unit of M.D.F.E.G./ teak wood board complete in all respect for Sodium Lamp on pole CAT. B |
| 72 | Supply and Fixing of 63 A 415 V heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron bracket complete in all respect (Hovell\"s Make) CAT. A |
| 73 | Supply and Fixingof LED Tube light batten suitable for up to 1x22 watt LED tube light fitting incluling tube on Surface in all respect. CAT. AA |
| 74 | Supply and Fixing of LED 10-20 watt of Philips/ Bajaj make. For wall bracket |
| 75 | Supply and laying of aluminium conductor PVC insulated armourd served sheathed cable 1100volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. ( Hovell\"s make) 6sq mm 2 core |
| 76 | Supply and laying of aluminium conductor PVC insulated armourd served sheathed cable 1100volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. ( Hovell\"s make) 10sq mm 2 core |
| 77 | Supply and Fixing of 6A to 32A MCB (10KA)(Hovell\"s make) |
| 78 | Supply and Fixing of 63A 4P MCB (10KA) (Hovell\"s make) |
| 79 | Supply and Fixing of power plug with 15A/250V flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 175x100x50mm size with phenolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer |
| 80 | Supply and Fixing of electronic fan regulator 120-280V . ISI marked on the existing switch board including making connections required material, labour , T& P etc. for proper completion of work to the satisfaction of engineer in charge of work |
| 81 | Supply and wiring of submain with 2 no. 2.5 sqmm FR PVC insulated 1100Vgrade multistrand single core copper conductor cable in 20mm dia heavy gauge rigid steel conduit on surface, one no. 14SWG copper earth continuity wire etc. complete in all respects Same as abovebut in 20mm dia heavy duty 2mm thick PVC conduit with one no. 1.5 sqmm FRPVC insulated 1100V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit (Lumpsum quantity has been taken in consideration) |
| 82 | Supplying and burrying earth electrod for lighting conductor of 600mmx600mmx6mm GI plate vertically for earthing with its top atleast 3meter below ground level complete with 20mm dia GI pipe for watering funnel, 30sqcm CI frame with hinge cover mesh masonary housing alternate layers of charcol/coke and salt atleast 150mm thick alaround etc. as per direction of engineer in charge complete in all respects |
| 83 | Supplying and laying of 25mmx3mm GI strip for earth electrode directly in the ground as required complete in all respect |
| 84 | Supplying and fixing of 1 no. 8 SWG GI wire in 15 mm dia GI pipe for earthing, laid in ground over in wall duly concealed including the cost of cement sand , labour , T&P other material required for proper completion of the work as directed at site. |
| 85 | Supply and fixing of GI pipe B class 50mm dia |
| 86 | Supply and erection of AC 230/250 Volts 50 Hz Ceiling fan with regulater standard down rod blades including connection etc. complete as required (Crompton Greaves/ Bajaj / Orient or equivalevt mark) BEE 5 STAR RATED-1200 mm Sweep |
| 87 | Earth work in exacavation in foundation in ordinary soil including lift upto 1.5 m and lead upto 30m. and dressing ofsides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i/c withina lead of 30 m. |
| 88 | Providing and layingin cement concrete 1:4:8 (1 cement: 4coarse sand : 8 graded brickaggregate 40 mm nominal size) and curing complete, including cost ofform-work, in foundation and floors. |
| 89 | Class 150 brick work in1:6cement and coarse sand infoundation and plinth including supply ofall materials, labourand tools and plants etc.requiredforpropercompletion of the work. partition wall |
| 90 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:1.5:3 (1 cement :1.5 coarse sand : 3 aggregates) , in lintels of doors and windows excluding supply of rienforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and alsoincluding supply of all materials labour and tools and plants etc. required for proper completion of the works. Strength of the concrete shall not be less than M-20.nominal size |
| 91 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennotincludedin an over all rates )wroughtto required shape as necessary including bending for proper completion ofthe work andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level. |
| 92 | External Plastering 12 mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 1.5-2.00 FM alongfor external wallsPWD 586 |
| 93 | internalPlastering 12mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 1.5-2.00 FM alongfor external wallsPWD 586 |
| 94 | Supplyi and fixing of co2 type fire extinguisher 4.5 kg capacity ( ISI Marked IS:2878 & TAC approved) B)CO2 Gas type 4.5 Kg capacity (IS:2878) |
| 95 | SIDE DEVELOPMENT |
| 96 | DRILLING & BORING OFHANDPUMP 11O MM PVC PIPE ETC ALL COMPLETED |
| 97 | SUPPLY & FIXING OF SUMERSEBUL 2 HP ALL COMPLETED |
AI Tender Summary
Tender Timeline
Nov 01, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 03, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender