Improvement To Hangers In Aircraft Division At 3Brd, Af ( Ph-I ) Under Ge ( Af ) Mc Chandigarh Improvement To Hangers In Aircraft Division At 3Brd, Af ( Ph-I ) Under Ge ( Af ) Mc Chandigarh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2021
0 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE (AF) MC CHANDIGARH → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Hangers In Aircraft Division At 3Brd, Af ( Ph-I ) Under Ge ( Af ) Mc Chandigarh Improvement To Hangers In Aircraft Division At 3Brd, Af ( Ph-I ) Under Ge ( Af ) Mc Chandigarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Nov-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) notexc 1.5 sqm each complete all as specified and directed . |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 Sqm each complete all as specified and directed. |
| 3 | Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out oldglazing pins/spring clips of any area complete all as specified and directed. |
| 4 | Dismantling plain ,corrugated sheeting,any gauge,thicknessas in roof coverings (including ridge) complete all as specified and directed. |
| 5 | Taking down cement plaster on brick wallincluding raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 6 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but exluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 7 | Dismantling of floor hearth or wall tiles including cement mortar but not backing complete all as specified and directed. |
| 8 | Dismantling of cast iron pipes 75/100 mm fixed in any position complete all as specified and directed . |
| 9 | Taking up or down 15mm bore steel water tubing and connection including cleaning for refixing or removal to store complete all as specified and directed. |
| 10 | Taking up or down 20mm bore steel water tubing and connection including cleaning for refixing or removal to store complete all as specified and directed. |
| 11 | Dismantling of PVC water storage tanks capacity exc 500 Ltrs.but not exc 1000 Ltrs complete all as specified and directed |
| 12 | Dismantling of steel rolling shutter of any description including top cover , anchoring rod, hasp & staple , complete all as specified and directed . |
| 13 | Dismantling of AC/PVC pipes 150 mm fixed in any position complete all as specified and directed . |
| 14 | Cutting opening, through brick walls built in cement mortar for door, window and other openings or enlarging existing opening. Converting window into door opening, etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc to store and rubbish not exc 50m complete all as specified and directed . |
| 15 | Cutting holes in brick walls exc half brick but n exc one brick in mud/cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate as required complete all as specified and directed . |
| 16 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 17 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed. |
| 18 | Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 19 | Dismantling of brick tiles or terracing tiles,single layer on roof complete all as specified and directed. |
| 20 | Demolition of existing tarfelt any no. of layers/ plaster/ thermo seal etc as in water proofing treatment to roof and cleaning the surface with wire brushes including removal of all dust or dirt etc to the distance outside the defence land complete all as specified and directed . |
| 21 | S&F rough cast wired glass, 6mm thick and glazing with oil putty in square exc 0.5 sqm but not exceeding 0.75 sqmin each panecomplete all as specified and directed. |
| 22 | M&L for false ceiling work with 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of approved design fixed with powder coated GI gridof size main Tee (15 x 32mm) cross Tee (23 x 15mm) and wallangle (18 x 12mm) suitable for mounting tiles of 595 x 595mm including fabricating complete all as per manufacturer instructions including necessary for hanging rod/wire 4mm dia of any length as per site requirement and any heightcomplete all as specified and directed. Make : Diamond/DG/EARCON/DEXTUNE |
| 23 | S&F 105x60mm pressed steel frames for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc complete all as specified and directed. |
| 24 | S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sidescomplete all as specified and directed. |
| 25 | S&F aluminium alloy, anodised, 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 26 | M&L for powder coated aluminum frame /shutter of any typefor doors,windows(sliding/openable ),ventilators,partitions with one or more rebates including joining cleat for fixing complete all as specified and directed. |
| 27 | S&F 4 mm thick aluminium composite panels(ACP) fixed in aluminium doors/partition or any other frame workincluding jointand sealingcomplete all as specified and directed. |
| 28 | S&F 4.8mm thick plain glass not exc 0.5 sqm in each pane fixedto aluminium door/ windows and iron frame complete all as specified and directed. |
| 29 | All as per item N0 28 here-in before but exc 0.5 sqm in each pane fixedto aluminium door/ windows and iron frame complete all as specified and directed. |
| 30 | S&F200 mm size powder coated (any tint) aluminium \"American Handle\" fixed to aluminium door with suitable screws complete all as specified and directed. |
| 31 | S&F aluminium handles, cast type, anodised of size 150 mm complete all as specified and directed.. |
| 32 | S&F 100mm size aluminum anodized butt hinges complete all as specified and directed. |
| 33 | All as per item N0 32 here-in before but 75mm |
| 34 | S&F aluminum anodized barrel bolt of extruded section 150 mm long complete all as specified and directed. |
| 35 | All as per item N0 34 here-in before but 200mm |
| 36 | S&F brass mortice lock verticle type 100mm size, 4 lever fixed in aluminium shutter complete all as specified and directed. |
| 37 | S&Fdoor closer aluminium body (die Cast)hydraulically regulated designation No 3 universed type cast iron body suitable for door shutters of 851 to 1000mm in width complete all as specified and directed. |
| 38 | S&F door stopper100 mm size of aluminium alloy body with rubberisedbottom complete all as specified and directed. |
| 39 | S&F aluminium deco grill suitable for window/ventilators inclding \"U\" chanels all around complete all as specified and directed. |
| 40 | S&F plain, galvanised, mildsteel sheeting 1.00 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 complete all as specified and directed. |
| 41 | S&F galvanized , corrugated mild steel sheeting of thickness 0.63mm with two corrugation side lap fixed with L-type or J-type or cranked hook bolts & washers in roof , walls etc with grade of zinc coating 120 complete all as specified and directed. |
| 42 | M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . |
| 43 | M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 44 | M&L for 10mm thick rendering in cement 1:3on fair faces of concrete surface with finished surface even and smooth in ceiling complete all as specified. |
| 45 | M&L two coats of oil bound distemper over a coat of alkali resistant primer over a coat of1-2mm thick wall care putty including preparation of plastered or unplastered new wall surfaces complete all as specified and directed . |
| 46 | M&L two coats of oil bound distemper over a coat of alkali resistant primer over a coat of1-2mm thick wall care putty including preparation of plastered or unplastered old wall surfaces including complete removal of existing treatment complete all as specified and directed . |
| 47 | All as per item No- 46here-in-before but on celing surfaces. |
| 48 | M&L for preparation of newly plastered surfaces and applying three coatsof white wash on ceiling surfaces complete all as specified and directed. |
| 49 | M&L for preparation of old plastered or unplastered decorated surfaces and applying two coatsof white wash on ceiling surfaces complete all as specified and directed. |
| 50 | M&L for preparation of old plastered or unplastered decorated surfaces and applying two coatsof white wash on wall surfaces complete all as specified and directed. |
| 51 | M&L for preparation of external surface on wall by wire brushes & stopping of surfaces & leveling/edging the disturbed places/edges using necessary filling compound of Birla/JK putty (or equivalent make) to obtain smooth regular/even finish with sand paper and applying one coats of exterior emulsion paint (in camouflage pattern using number of colours)at any height including necessary scaffolding etc complete all as specified and directed. |
| 52 | M&L for preparation to new plastered surfaes and applying two coats of exterior emulsion paint (in camouflage pattern using number of colors) over Birla/JK putty (or equivalent make) to obtain smooth regular/even finishincluding one coat of primer at any height including necessary scaffolding etc complete all as specified and directed. |
| 53 | Material and labour for brickwork with subclass \"B\" bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 54 | M&L for brickwork with subclass ‘B’ bricks old size, straight or curved on plan to any radius as in half brick thick walls built incement mortar 1:4 complete all as specified and directed. |
| 55 | M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 56 | M&L forNon-skid ceramic coloured joint free tiles 7 to 8mmthick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar15 mm thickin cement mortar 1:4complete all as specified and directed. |
| 57 | S & F cast iron 100mm bore waste or vent sand cast pipes as in any length with orw/o ears with cement joints laid in floor complete all as specified and directed . |
| 58 | All as per item No. 57here-in-before but fixed to walls |
| 59 | S & F in repairs cast iron 100mm bore sand cast single branch pieces (equal or un equal ) ordinary qualityand inverted spigot socket type or with parallel branchwith oval access door complete all as specified and directed . |
| 60 | S & F cast iron 75mm borewaste or vent sand cast pipe as in any length with orw/o ears with cement joints fixed to wall or laid in floor complete all as specified and directed . |
| 61 | S & F in repairs cast iron 100mm bore sand cast bends (any radius ) and straight connecting piece complete all as specified and directed . |
| 62 | All as per item No. 61here-in-before but with rest heel |
| 63 | S & F in repairs cast iron 75mm bore sand cast bends (any radius ) and straight connecting piece complete all as specified and directed . |
| 64 | S & F in repairs cast iron floor trap 75mm with CP grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B-1,with CP gratings complete all as specified and directed . |
| 65 | S&F in repairs 100mm dia ‘P’ or ‘S’ trap complete all as specified and directed . |
| 66 | S&F for GI tubing medium grade 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed . |
| 67 | S&F for GI tubing medium grade 20mm bore with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed . |
| 68 | S&F rotational moulded polyethylene (tripple Layer) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I,complete all as specified and directed.Make : Syntex/Sheetal/Diplast |
| 69 | S&F 20mmball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.Make : Prayag/Polyplast/Polytuf |
| 70 | S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 71 | S&Fvitreous china squatting pan Orissa pattern of size 580x440mm including integral foot rest fixed in position complete all as specified and directed. |
| 72 | All as item No. 71here-in-before but fixed in repairs. |
| 73 | S&F 10 litres capacity PVC low level flushingcistern complete with all fittings complete all as specified and directed.Make-Hindware/parryware/cera |
| 74 | S&F in repairs 10 litres capacity PVC low level flushingcistern complete with all fittings complete all as specified and directed.Make-Hindware/parryware/cera |
| 75 | S&F 15mm dia bib tap, chromium plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and directed. |
| 76 | S&F in repairs 15mm dia bib tap, chromium plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and directed. |
| 77 | S&Fin repairs 15mm bore CP angle cock/Stop valves fancy type,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed .Make : Seiko/Parko/EssEss |
| 78 | S&F in replacement PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and directed |
| 79 | S & F vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with and including spreader complete all as specified and directed. |
| 80 | S & F in rep vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with and including spreader complete all as specified and directed. |
| 81 | S & F 10 mm thicktoughened glass partitions (perforated size 700x500mm) for Urinals with and incl SS fasteners &SS screws and PVC rawl plugs, incl making suitable holes for fixing ,complete all as specified and directed. |
| 82 | S & F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 83 | S & F 2000W hand drier for wash rooms complete all as specified and directed . |
| 84 | S&F S&F CP brass towel rail 24\" long 15mm dia complete all as specified and directed . |
| 85 | S&F S&FCP brass towel ring 6\" dia complete all as specified and directed . |
| 86 | S & F in repairs brass chromium plated shower rose 125mm size with arm screwed down for iron pipe and fixed complete all as specified and directed . |
| 87 | S&F Vitreous China wash basin,oval type counter top size 580 x450mm ,including 32mm dia CP waste coupling & PVC pipe of suitable length exluding taps,complete all as specified and directed |
| 88 | S&F in repairs Vitreous China wash basin white flat back of size 550x400mm with CP waste coupling & pipe complete all as specified and directed . |
| 89 | S & F in repairsCP brass, centre hole basin mixer fancy type ,15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed . |
| 90 | S&F factory made solid PVC single door frames of size 50 x 47mm made out of 5mm plain colour PVC Sheets reinforeced with MS Square tubbing in opening complete all as specified and directed. |
| 91 | Supply and fix Factory Made Solid PVC Moulded Door Shutters with28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification anddrawing in SSR part II on page no 161 complete all as specified and directed. |
| 92 | S&F for 100 mm SS butt hinges fixed with SS screws to PVC doorscomplete all as specified and directed. |
| 93 | S&F Aluminium anodised, barrel tower bolts of extruded section 200 long complete all as specified and directed . |
| 94 | M&L forReinforcedcement concrete 1:2:4 , type B-1(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, shelves and the like complete all as specified and directed. |
| 95 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finishedof concrete flat surfaces complete all as specified and directed. |
| 96 | M&L for mild steel TMT bars 8 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and building with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 97 | M&L for 18-20mm thick granite stone slab (jet black/ruby red or any other colour as directed) as in floorsover & incl 15mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 98 | M&L for 18-20 mm thick marble other than white (table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and likein over and incl 15 mm thick screed bedin CM1:6 , including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified . |
| 99 | S&F 1.25 mm thick rolling shutter, without ball bearing including top cover , anchoring rod, hasp & staple, gear operated type with bevel gear box and crank handle and one coat of shop coat primer, erectedin position as indicated , complete all as specified.and directed by engineer-in-charge |
| 100 | Excavation as in soft/ loose soil as in post holes (or similar holes) each n exc 0.5 cum getting out,ramming, watering ,returning filling in and removing surplus soil to a distance not exc 50m concrete all as specified |
| 101 | M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregates as in foundation , mass concrete all as specified |
| 102 | S&F for steel work in tubular tresses (sqaer/rectangular/ circular section of any size & thickness) including bending in any shape (circular/semi-circular / eliptical /parabolic) washer etc complete using ERW or induction butt weed tubes confirming to IScomplete all as specified and directed . |
| 103 | S&F inrolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates confirming to Fe-410-W(Gd-E-250) quality A complete all as specified and directed. |
| 104 | S&F inframed work for grills, gratings etc with ends of bar shouldered and for riveted or welded framed work guard bars and similar work complete all as specified and directed. |
| 105 | S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachmentconforming to Fe-410-W(Gde-E-250) ,complete all as specified and directed . |
| 106 | M&L for applying two coats of synthetic enamel paint overa coat of red oxide primer incl preparation of previously untreatedsteel or iron surfaces exc 10cm width or girthcomplete all as specified and directed. |
| 107 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreatedwooden surfaces exc 10cm girth or girth incl preparation of new wooden surfaces complete all as specified and directed. |
| 108 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 109 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of a colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed. |
| 110 | M&L for 18-20mm thick machine cut kota stone slab flooring over 15 mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed . |
| 111 | M & L PCC 1:2:4 type B-0using12.5 mm graded stone aggas in padding (50mm thick average thickness) on roof laid in required slope finished even and fair without using extra cement including dismantling of existing PCC and removing the debris outside the defence land complete all as specified and as directed. |
| 112 | M & L PCC 1:2:4 type B-0(12.5 mm graded stone agg ) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed . |
| 113 | M & L for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 with water proofing compound finishing even and fair without using extra cement as in under layer of roof treatment at any heightcomplete all as specified and as directed.Note : Water proofing compound shell be paid seperately. |
| 114 | Supply only Liquid water proofing compound complete all as specified and directed . |
| 115 | M&L for applying oil bound bituminous primer @ 0.20 Kg/Sqm and providing 4mm thick, APP modified water proofing membrane reinforcedwith non woven polyester matt having softening point not less than 150 degree centigrade having tensile strength of 650 N/Sqcm in longitudinal and transverse directions respectively of the reinforcement tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blownhot bitumen grade90/10 over the membrane @ 1.2 Kg/Sqm complete all as specified and directed. |
| 116 | M&L for 40mm thick brick tiles laid on 15mm thick screed bed in CM 1:6 , joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed. |
| 117 | S&Fin repairs 150mm dia PVC (SWR) pipes,single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed . |
| 118 | S&F in repairs150mm dia PVC (SWR) bends, in any redius complete all as specified and directed . |
| 119 | Taking down carefully old unserviceable point wiring (Light, fan, socket or power complete (fittings such as switches, ceiling roses, pendants, regulator, sockets, light fittings etc) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed |
| 120 | Taking down carefully by unscrewing the unserviceable sheet metal enclosure, DB boxes complete with MCCB/MCB SP, SPN & TPN etc all as directed. |
| 121 | Taking down the sub main wiring/Al cableof any size complete removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed and specified. |
| 122 | Supply and fixing Sub main wiring alongwith earth wire with the following sizes of FRLS pvc insulated copper conductor ,single core cable in surface 4x16 sqmm+2x16 sqmm earth wire incl PVC conduit of size 40 mm dia.Note : 4 Run of 16 Sqmm copper conductor 01 run of conduit and 02 run of each continuity conductor of size 16 Sqmm shall be meanured as one RM. |
| 123 | Supply and fixing Sub main wiring alongwith earth wire with the following sizes of FRLS pvc insulated copper conductor ,single core cable in surface 2x2.5 sqmm+1x2.5 sqmm earth wire incl PVC conduit of size 25 mm dia.Note : 4 Run of 2.5 Sqmm copper conductor 01 run of conduit and 01 Run of each continuity conductor of size 2.5 Sqmm shall be meanured as one RM. |
| 124 | M&L for MCB DB SPN 8 way IP-43 double door concealed in wall with MCB SPN 32 Amps 01 Nos I/C and MCB SP `C\" curve type 6 to 16 Amps 06 Nos O/G including necessary connection lugging with copper lugs pin/ring type making good disturved surfaces to match with existing surface/wall. Make : C&S/ABB/Siemens |
| 125 | M&L for MCB DB TPN 4 way IP-43 double door concealed in wall with MCB TPN 63 Amps 01 Nos I/C and MCB SP `C\" curve type 6 to 16 Amps 12 Nos O/G including necessary connection lugging with copper lugs pin/ring type making good disturved surfaces to match with existing surface/wall.Make : C&S/ABB/Siemens |
| 126 | Supply and fix insulated copper strip 20 x 3 mm fixed on insulator on wall at 50 Cm spacing and 60 Cm above ground. |
| 127 | Supply and install Wall mounted Air Circulator metal body 600 mm (24\") size 1400 rpm heavy duty AC single phase 230/240volts fixed on wall /Piller complete including necessary connection with 3 core flexible copper cable of suitable size complete all as specified and directed by Engr-in-charge |
| 128 | Chemical Earthing complete with copper earth plate electrode 900 x 600 x 5 mm thick burried directly in ground (eartyh pit not less than 3.5 m deep below ground level) with top edge of plate not less than 2.5 m below normal ground level, earth pit filled with Magnesium Sulphate (Mg SO4) all around the plate including connection with and including copper strip 50 x 6 as earth lead fixed by means of copper nuts, bolts, check nuts and washers etc and other end connected to the test point including 80 mm dia light grade GI protection pipe and watering pipe 20 mm dia med grade with funnel and wire mesh including necessary earth work, PCC earth pit chamber (internal size 300 x 300 mm) in PCC 1:2:4 using 20 mm graded stone aggregate with precase RCC pit cover 80 mm thick etc complete all as directed and specified.Note : The earth value/result must be less than 1.0 ohms. |
| 129 | S&F GI strip 32 x 6 mm as earth continuity conductor or main earthing lead fixed to wall on battern or recess or chases or burried in ground or drawn in conduit/pipe or fixed to wall or any other indicated situation to connect the equipment from test point complete all as specified and directed. |
| 130 | S&F wind driven Turbo ventilator OUTER DIA 30\" Effective throatal 24\"Air changes 15/hr, speed 4 m/s ,air volume 39000 cum/h complete with base plate all as specified and directed. Make : Mercury enterprises or equivalent. |
| 131 | M&L in repairs for point wiring complete with 1.5 sqmmsingle core multi stranded FRLS copper conductor in and including PVC conduit Surface on wallincluding flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer compete with 1.5 sqmm multi stranded PVC insulated copper conductor cable as earth continuity conductor connected to earth dolly for the following |
| 132 | One light point/fan point controlled by one switch 5 amps |
| 133 | All as per item No-131 above but 5 amp socket on independent board |
| 134 | All as per item No-131 above but15 amp power point with 2.5 sqmm copper conductor on Independent board. |
| 135 | M&L for socket outlets 2 in 1, 6/16 amps 230 V AC modular type. |
| 136 | S&F switch modular type 15 amp single pole one way . |
| 137 | S&Fswitch modular 5 Amp single pole one way. |
| 138 | M&L for socket outlets 5 Amps 5 pin 230 V AC modular type |
| 139 | M&L in repairs for LED Tube light fitting 20W, 4 ft long luminaire comprises of extruded channel in thermally conductive material high translucent serrated milky white diffuser is used to get glare free and smooth light distribution . Efficiency : 100 lumen/watt . Make : Crompton/Havells/C&S |
| 140 | M&L in repairsfor LED square shaped slim width of the tile makes it seamlessly blend in with the ceiling space . White geometric and aligned designs, 2\"X2\" , 36 Watt. Make : Crompton/Havells/C&S |
| 141 | M&L in repairsfor LED high bay fitting 150W , High efficiency round highbay in PDC housing suitable for industrial . The luminaire has efficacy of 110 Lm/WIP 66. Make : Crompton/Havells/C&S |
| 142 | M&L in repairsfor LED Flood light fitting 150 W made up of pressure die cast alumunium housing with toughened glass and high power LEDs and secondary lenses wioth IP 66protection . System efficacy > 110 LPW.Make : Crompton/Havells/C&S |
| 143 | M&L for LED Security light fitting 90 W made of pressure die cast housing with toughened glass and high power LEDs and secondary lenses with IP 66 Protection. Make : Crompton/Havells/C&S |
| 144 | S&F copper strip braided type of size 40 mm x 3 mm wounded on drum approx 20 Mtr length for loop earthing to equipments complete all as specified. |
| 145 | M&L for earthing complete with electrode 600x600x3mm copper plate ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal gound level connected to 20x3mm copper strip bolts,nuts, check nuts and washer of galvanized iron or steel all as shown inelectrical plate No 3 connected to test point including testing complete including necessary excavation and earth work in any type of soil, PCC 1:3:6 type chamber (internal dimension 300 x 300 mm) MS funnel,watering pipe 20 m dia medium grade, protection pipe 40mm dia of GI pipe light grade length upto test point pre cast RCC cover (80 mm thick) all as specified and directed by Engr-in-Charge. |
| 146 | Supply, installation, commissioning and testing of high wall mounted split type unit AC 2 TR with cooling and heating function operated on 410A/407C refrigerant gas, not less than 3 star rated, with cordless remote, operated on single phase AC supply 230 volts including necessary making holes, cutting chases for refrigerant pipes , connection cable etc in brickwall, necessary MS brackets for fixing outdoor/indoor units, made out of structural steel sections duly painted with two coats of synthetic enamel paint over a coat of red oxide making good to disturbed area and matching with the existing surface, PVC heavy duty conduit pipe 2mm thick laid concealed in brickwall from inner unit to outside, necessary refrigerant pipes including PVC insulated 3 core 4 sqmm copper flexible cable of required length from inner unit to outer unit and for socket point of voltage stabilizer etc all as specified and directed by Engr-in-Charge. |
| 147 | Material and labour for sub main wiring (concealed) two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as sub main wiring including suitable size medium grade PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified.Note : 2 runs of 6 sqmm copper conductor, 01 run of conduit and 01 run of earth continuity conductor of size 6 sqmm shall be measured as one RM. |
| 148 | S & F sheet metal enclosure SPN with a two pin and earth plug socket complete including with 32 Amp MCB ‘C’ single pole 240 volt. |
| 149 | Supply, installation, commissioning and testing of automatic voltage stabilizers single phase 5 KVA capacity operated on single phase supply, designed for input voltage between 140 volts to 280 volts and output voltage stabilised at 230 volts + 8% including necessary connection etc complete all as specified and directed by Engr-in-Charge.Make : Volina/V Guard or equivalent |
| 150 | S&F angle iron of size 40x40x6 mm fixed to wall including anchor fastener and nut bolts of suitable size complete to fix the galvalume sheet complete all as specified and directed. |
| 151 | M & L for GI tubing medium grade of 20 mm bore flushed in wall/ floor drain out the condensed water from the cooling unit all as specified and directed. |
AI Tender Summary
Tender Timeline
Nov 11, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 18, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 18, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender