Military Engineer Services-MES has published Spl Repair To Plastering Flooring Joinery Roof Treatment Rewiring And Plumbing Work In Bldg No P 12 Of 2 6 Bldg No P 3 Provn Of Chain Link Fencing From Offrs Mess To Family Qtr And Mosquito Proofing With All Accessories And Hardstanding Near Spl Repair To. Submission Date for this Tender is 22-11-2021. Electrification Work Tenders in MUZAFFARPUR Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-11-2021 |
| Sl. No. | Item Description |
| 1 | Demolition of Brick work or stone/ boulder masonary built in Cement mortar complete all as specified & directed |
| 2 | M & L for brick work with sub class `B" brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed. |
| 3 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc |
| 4 | M&L reinforced cement concrete1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in lintel beams, cantilever, bressummers, lintels over 1.5 m clear spanetc complete all as specified & directed. |
| 5 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 6 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 7 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 8 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed. |
| 9 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer"s instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. Note:Liquid WPC will be measured and paid separately. |
| 10 | M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed . |
| 11 | Supply only water proofing compound (liquid),ISI marked complete all as specified & directed. |
| 12 | Roughening surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. and brushing neat cement slurry @ 3 Kg /Sqm Complete all as specified & directed |
| 13 | M&L10 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:4), with WPC (WPC measured & paid separetly) finished even and smooth (without using extra cement ) complete all as specified and directed |
| 14 | M&L for 25 mm average thickness PCC 1:2:4 type B-0 (Using 12.50mm gradedstone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed, |
| 15 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii)Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. |
| 16 | M & L for preparation of newly plastered surfaces ofwalland applying two coats of oil bound distemper over a coat primer over and including 3 mm thick wall care putty including preparation complete all as specified and directed. |
| 17 | M&L for prepartion new plastered surface of wall and applying two coat of cement base paint over a coat primercomplete all as specified & directed. |
| 18 | M&L for applying 3mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 19 | M&L for applying two coats of oil bound distemper on old plastered wall surface complete all as specified and directed. |
| 20 | M&L for applying 3mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 21 | M&L for applying two coats of oil bound distemper on ceiling on old surfaces complete all as specified and directed. |
| 22 | M&L for prepartion old plastered surface of wall and applying two coat of cement base paint complete all as specified & directed. |
| 23 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 24 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 25 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 26 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified & directed. |
| 28 | M & L 25 mm PCC 1:2:4 type B0 (Using 12.50mm gradedstone aggregate) to receive toping layer complete all as spd and directed |
| 29 | M & L for Non skid colour tiles of 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc. over and incl 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 30 | M&L for glazed ceramics coloured tiles of size 450x300x 7mm thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 31 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame)complete all as specified and directed |
| 32 | Ditto--- as per Srl itemNo 31.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified & directed. |
| 33 | S&F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spd and directed |
| 34 | M&L mild steel framed work such as grills, gates,stand for intricate design with ends of bars welding or forged into spikes including pintle hings stops hand made sliding bolts etc & similar work conforming to Fe-229-0 Gde E-165 complete all as specified and directed. |
| 35 | S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed. |
| 36 | ~Ditto~ All as per item No 35.00 above but without glazing bars complete all as specified and directed |
| 37 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed. |
| 38 | S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 39 | S&Fin repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 40 | S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed. |
| 41 | S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 42 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 43 | M & L for Post construction Antitermite Treatment of soil under existing floors using emulsion @ one ltr per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 coarse sand ) to match the existing floors complete all as specified and directed. |
| 44 | M & L for Post construction Antitermite Along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes etc in apron complete all as specified and directed. |
| 45 | M&L for 18 to 20 mm thick granite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 46 | S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 47 | M & L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) as in back filling of pressed steel frames and similar works inclduing necessry form work as required complete all as specified and directed. |
| 48 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge |
| 49 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed... |
| 50 | SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 51 | S & F aluminium alloy anodised, slidingdoor bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm large complete all as specified and directed. |
| 52 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 53 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 54 | S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 55 | S&F Aluminium handles, cast type, anodized 150 mm sizeISI Marked complete all as specified and directed. |
| 56 | S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 57 | S&F mild steel Bracket and bulb with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 58 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mmwideand 75mm deep joints shall be made at 3 mtr intervel andat each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.complete all as specified and directed. |
| 59 | M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed. |
| 60 | M&L for hard core of broken stone gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed. |
| 61 | M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor Complete all as spesifiedand directed |
| 62 | M&L 50mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate), as in floor Complete all as spesifiedand directed . |
| 63 | S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white including white seat cover ( excluding flushing cistern and flush pipe) complete all as specified & directed by Engr-in- Charge. |
| 64 | S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union completeall as specified and directed. |
| 65 | Supply and fixing in repair 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 66 | S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete in repair complete all as specified & directed. |
| 67 | S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets complete complete all as specified & directed. |
| 68 | S&Fin repair Soap dish, stainless steel, approximate size 160x160x90mm and approved by EIC complete all as specified & directed |
| 69 | S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. |
| 70 | S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed. |
| 71 | S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 72 | S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 73 | S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or unioncompleteall as specifiedand directed. |
| 74 | S&F in repair vitreous china squating pan "Orissa" pattern WC size 580x440 mm white with integral foot rest and trap andincluding connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor completeall as specifiedand directed. |
| 75 | S&F in repair bib tap 15mm chromium plated long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed. |
| 76 | S&F in repair 600mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed. |
| 77 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 78 | S&F in repairs sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 79 | S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed. |
| 80 | Taking down PVC/ACpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mmdia pipe complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenchescomplete all as specified and directed. |
| 82 | ~Ditto~ all as per item No 81.00 above but 75 mm bore complete all as specified and directed. |
| 83 | S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed. |
| 84 | S&F PVC (SWR)bend/shoes any radius of 110 mm dia complete all as specified and directed. |
| 85 | M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed |
| 86 | S&F PVC (SWR) bends any radius With access door of 75 mm dia complete all as specified and directed. |
| 87 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 88 | S&F PVC (SWR) floor trap with grating including jointing with solvent cement 75 mm dia etc complete. |
| 89 | Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed |
| 90 | Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed |
| 91 | S & F 15 mm dia GI mild steel tube medium grade withall fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. |
| 92 | S & F 20 mm dia GI mild steel tubemedium grade withall fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. |
| 93 | S & Fin repair rotational moulded polyethylene water storage tank (Three layer) of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed. |
| 94 | S&FPTMT ball valve 20 mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified & directed |
| 95 | Cutting chases in brick wall, etc for concealed water tubing ,etc & making goodin CM 1:3 , cutting not exc 10 cm girth complete all as specified & directed. |
| 96 | S&F in repair 450mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed. |
| 97 | Dismantling of wall/ceiling boards(fibre, pulp, insulation, etc) of any type including cover fillets etc complete all as specified & directed. |
| 98 | S&F in position false ceilling comprising of grid system of Armstrong or equivalent for frame work with GI powder coated angle wall runners of size 19 mmX19 mm cross Tee of size 24mmX24mm and main tee of size 34mmX24mm at 60 cm c/c approx to form a grid of 600mmX600mmfor designer false ceilling suspended form roof on main runners @ 0.90 mm c/c by means of suitable suspender (average 1.50 mtr length) 4 mm GI wire with adjustable cleats of hook including ceiling board ofsound absorbing of size 60 x 60 cms, 9 mm thick ofARMSTRONG or any other make specified in Particular Specificationcoloured with perforationscomplete all as specified and directed. |
| 99 | M&L for Roof Trusses (framed trussed purlins ,crane gantries , rails and fastenings and heavy brackets framing (beam tee, angle ,channel or flat sections) including distance piece ,cleats etc. complete all as specified and directed.. |
| 100 | M&L Cutting holes into or through brick walls built in cement mortar/cement lime mortar superficial area n.exc. 150 Sq. cm and making good in cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as required complete all as specified & directed. |
| 101 | S&F Galvanised, corrugated mild steel sheeting thickness 0.63mmwith two corrugations side lap, fixed with coach screw and washers, J-type,L-type or cranked hook in roofs, walls etc with grade of zinc coating 275 complete all as specified& directed |
| 102 | M&L machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror and polishing & rounding to edgesover & incl 20 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 103 | M&L for kota stone slab 20-25mm thick in riser of step, skirting ,dado and pillar laid over 15 mm thick cement screed in CM 1:4 and jointed with ditto as per Item above |
| 104 | S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutterand incl shelves complete all as specified and directed. |
| 105 | M & L for Non skid colour ceramic tiles of 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor etc. over and incl 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 106 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 107 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft / loose soil complete all as specified and directed. |
| 108 | S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. |
| 109 | Removing surplus excavated material (SOIL) to distance exc. 50 m but not exc. 100m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 110 | M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base complete all as specified and directed. |
| 111 | M&Lcement concrete1:4:8type-D2 (40mm graded aggregate) asin foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed.. |
| 112 | M&L reinforced cement concrete1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in columns, pillars, posts, struts complete all as specified & directed. |
| 113 | S&F powder coated anodised aluminium frame & shutter sliding or casement type for window/ventilator with one or more rebates including joints cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixing complete all as specified & directed |
| 114 | M&LCement concrete1:2:4type-B-1 (20mm graded aggregate) asin foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed.. |
| 115 | M&L reinforced cement concrete1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in foundation, footingsk foundation beam, plinth beams, bases for cloumns, pedestal, under reamed , piles, mass concrete etc complete all as specified & directed. |
| 116 | M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed. |
| 117 | S & F of mild steel work in hand rails, half round or other stock section or core for wooden hand - rail straight portioon, drilled and countersunk for balusters, nosing of steps, including embeding in concrete and screwing etc. wind ties for foof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed. |
| 118 | S & F chain link fencing including line wire, any mesh, any size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Note ; Actual work of chain link fencing shall be ascertained by BOO. |
| 119 | S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. ( Each line wire to be measured) complete all as specified and directed. |
| 120 | M & L old size brick work with sub class "B" bricks laid flat in floor laid in dry complete all as specified and directed. |
| 121 | Formwork to sides of pillars, posts, struts piers, columns, stanchionscomplete all as specified & directed |
| 122 | S&F6 to 8 mm dia round bar fixed to chain link fencing complete all as specified & directed |
| 123 | Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such asswitches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed. |
| 124 | Taking down carefully main switches DB"s/ MCB DB"s with MCB and making good the disturbed surfaces of wallscomplete all as specified and directed. |
| 125 | Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed. |
| 126 | M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed:- |
| 127 | One light/fan point controlled by one switch complete all as specified & directed |
| 128 | One bell point controlled by one switch complete all as specified & directed |
| 129 | One 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed. |
| 130 | One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed. |
| 131 | ~Ditto~all as per Sch A Item No- 126.00 above but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed.. |
| 132 | S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed. |
| 133 | S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed. |
| 134 | S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed. |
| 135 | Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed. |
| 136 | S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed. |
| 137 | Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed. |
| 138 | Supply and fixing multi music Bell, AC 240 Volts,single pole complete all as specified and directed. |
| 139 | S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed. |
| 140 | Supply and fixing bell push single pole, 6 amps, 230 Volts, flush type complete all as specified and as directed. |
| 141 | S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make-Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Bajaj/Surya/ Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH+CRYSTAL1213T8DSTL18WLED865SGLASSor equivalent model of Bajaj/Philips/ CG. |
| 142 | M & L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Juction boxes, elbows saddles. Pipe hooks, couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs complete all as specified & directed. |
| 143 | Supply and fixingdouble door SPN DBs eight wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . |
| 144 | M/L for provision of sub main wiring with two runs of single core PVC insulated unsheathed 4 Sqmm mutistranded copper conductor 1100 volts drawn inPVC conduit with incl PVC insulated unsheathed multistronded copper conductor 2.5 sqmm as earth continuity and connected of common earth dolly all as specified& directed by Engr-in-Charge. |
| 145 | Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. |
| 146 | S&F MCB SP of capacity 5 - 32 Amps 240 volts, 10 KA breaking capacity "C" type incl connectioncomplete all as specified & directed. |
| 147 | Supply, installation and testing high wall split units indoor and outdoor complete unit with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with PM 2.5 filter, BEE 5 Star rating and EER 3.2 of capacity 1.5 TR (Ton of refrigeration) including metal wall hunger of suitable size for fixing outdoor unit at wall complete all as specified and directed. Make:- Carrier, Model: EMPERIA Nxi(5star) or equivalent model ofBlue Star/LG/Voltas |
| 148 | S&F Voltage stabilizer of capacity 5 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed. Make : V-Guard, Volina, AE |
| 149 | M&L for Sub main wiringtwo single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor,drawn in and including non metallic rigid PVC conduit medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles etc of size 25 mm external dia in concealed wiring system by cutting of wall and making good disturbed surface of wall as per existing and including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed. |
| 150 | Supply & fixing sheet metal earth plug, socket single pole and neutral complete with single pole MCB 32 Amps 240 volts complete all as specified and as directed. |
| 151 | Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
