Spl Repair To Recreation Room Behind Stn Hq And Certain Other Sanctioned Works Under Ge Sukna Spl Repair To Recreation Room Behind Stn Hq And Certain Other Sanctioned Works Under Ge Sukna
Tender Value
40 Lakhs
Estimated cost
Bid Submission
15 Nov 2021
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Spl Repair To Recreation Room Behind Stn Hq And Certain Other Sanctioned Works Under Ge Sukna Spl Repair To Recreation Room Behind Stn Hq And Certain Other Sanctioned Works Under Ge Sukna
BOQ
| Sl. No. | Item Description |
| 1 | BOQ Part-I (B/R Work) |
| 2 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed. |
| 3 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed. |
| 4 | Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed. |
| 5 | All as per Sl item No. 1.03 above but exc 1.5 m & not exc 3.0 m deep |
| 6 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 7 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing wheredirected at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 8 | Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings,dressed stonework andprecast concrete articles complete all as specified and directed. |
| 9 | M&L brick work withsub class\"B\" brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 10 | All as per Sl item No. 1.08 above but except bricks.Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item. |
| 11 | M&L brick work with sub class \"B\" bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed. |
| 12 | M&L brick work withsub class\"B\" brick, in one brick thick honey comb walling, built in CM 1:4 complete all as specified and directed. |
| 13 | Taking down cement plaster on brickor concrete surfaces / ceiling, racking out joints hacking for key scrubbing downwith water etc complete all as specified and directed. |
| 14 | M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed. |
| 15 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 16 | Supplyonly liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited |
| 17 | M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper overa coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish completeall as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 18 | M&L preparation of new plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya |
| 19 | M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer complete all as specified and directed.Make:-Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd |
| 20 | M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemperovera coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish completeall as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 21 | M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of weather coat acrylic exterior emulsion paint over a coat of primer complete all as specified and directed.Make:-Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd |
| 22 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 23 | M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 24 | M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 25 | M&L 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 26 | M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 27 | M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 28 | Demolition of cement concrete (unreinforced) inground floorsand pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 29 | M&L 50 mm thick, PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregate) as in floors complete all as specified and directed. |
| 30 | M&L 75 mm thick, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed. |
| 31 | M&L 75 mm thick, PCC 1:4:8, type D-2(using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 33 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 15 mm thick in CM 1:4 complete all as specified and directed.Make:-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles)Orient Bell Ltd / H & R Johnson India Ltd |
| 34 | M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thickas in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thickscreed bed in CM 1:3 complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) |
| 35 | M&L 10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles area of each tiles exc. 0.36 sqm but n exc. 0.42 sqmin floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 36 | M&L vitrified paver tiles of size 300 x 300 mm and 8 to 10 mm thick (square / rectangular) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 37 | M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. |
| 38 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 39 | M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed. |
| 40 | M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 41 | M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 42 | M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed. |
| 43 | M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. complete all as specified and as directed. |
| 44 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed. |
| 45 | Use and waste of formwork to chullah hoods, chajjas, troughs and similar items includingedges for fair finished surfaces of concrete, flat / curved complete all as specified and directed. |
| 46 | Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 47 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed. |
| 48 | M&Lmild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 49 | All as per Sl item No. 1.47 above but 6 to 8 mm dia. |
| 50 | All as per Sl item No. 1.47 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders. |
| 51 | Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 52 | M&L rolled mild steel conforming to Fe 410-W (Gde - E-250) quality-A, in rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel orflatsections) and including distance pieces, cleats etc. complete all as specified and directed. |
| 53 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed. |
| 54 | S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed. |
| 55 | S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed. |
| 56 | S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long complete all as specified and directed. |
| 57 | Dismantling asbestos cement(corrugated or semicorrugated, etc.) sheets in roofs, walls coverings etc. complete all as specified and directed. |
| 58 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT(total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd |
| 59 | All as per Sl item No 1.57 above but plain steel sheet |
| 60 | S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire & dismantling complete all as specified and directed.Make of boards:- Everest / Visaka Industries / Lafarge / ArmstrongMake of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products |
| 61 | M&L 12 mm thick gypsum board in ceiling including fibre tape, jointing compound, fixed with screw as per manufacturer’s instructions to and including GI frame work for seamless ceilng comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with contacting clips across the intermediate channel at 457 mm centre to centre hanging from structural steel / scantling with 6 mm GI wire, making decorative type design in ceiling with POP, preparation of surface and applying two coat of plastic emulsion paint over a coat of primer over one coat of wall care putty (0.5 - 1mm thick) including dismantling complete all as specified and directed.Make of Gypsum Board:- USG / Gyproc / Boral Gypsum / ArmstrongMake of GI Grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling ProductsMake of Paint :- Silk (Berger) / Dulux Velvet touch (ICI) / Shalilmar Paints / Asian Paint Ltd / Nerolac Paints Ltd / Nerolac Pains Ltd / Jotun India Pvt LtdMake of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 62 | Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 63 | All as per Sl item No 1.61 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each |
| 64 | Taking down shutters of any description not exc 1.0 Sqm each complete all as specified andas directed. |
| 65 | All as per Sl item No 1.63 above but exc 1.0 Sqm but not exc 2.0 Sqm each |
| 66 | S&F aluminium anodised powder coatedframe work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed.Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries |
| 67 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed. |
| 68 | S&F 4 mm thick sheet glass selected quality and glazing with oil putty / wooden beads in square exc 0.50 sqm in each pane complete all as specified and directed. Make:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington |
| 69 | S&F 3.00 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty/wooden beads in square n.exc. 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington |
| 70 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 71 | S&F 105 x 60 mm size pressed steel door frames for doorswith one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 72 | All as per Sl item No 1.70 above but 125 x 60 mm size. |
| 73 | S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed.Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply |
| 74 | S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE) |
| 75 | S&Fsolid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 76 | S&F factory made wire guazed (panel will be wire guazed in lieu of plain PVC sheet) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The wire gauze shall be wrapped on an additional square 8 mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmlycomplete all as specified and directed. Note:- Wire cloth / wire mesh shall be measured seperately.Make:- Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 77 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fortop rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed.Make:- Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 78 | M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc. complete all as specified and directed. |
| 79 | S&F 100 mm butt hinge, medium weight, cold rolled mild steelcomplete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 80 | S&F 150 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed complete all as specified and directed.Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 81 | S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 82 | S&F 150 mm long, mild steel pressed handles, oval type, stove enamelled black and fixed complete all as specified and directed.Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 83 | S&F 150 mm Aluminium handles cast type, anodisedand fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 84 | S&F 300 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 85 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolttype and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 86 | Taking down 15 mm bore steel water tubing and connections from wall / ceiling including cleaning for refixing or removing from site of work complete all as specified and directed. |
| 87 | All as per Sl item No 1.85 above but 20 mm bore. |
| 88 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 89 | All as per Sl item No 1.87 above but 20 mm bore. |
| 90 | M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc. 10 cm girth complete all as specified and directed. |
| 91 | S&F 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 92 | All as per Sl item No 1.90 above but in repairs. |
| 93 | S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screweddown high pressure, with or without lettered “hot\" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 94 | S&F 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipe or union complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 95 | All as per Sl item No 1.93 above but in repairs. |
| 96 | S&F angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 97 | All as per Sl item No 1.95 above but in repairs. |
| 98 | All as per Sl item No. 1.95 above but two way angular stop cock.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 99 | S&F health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 100 | All as per Sl item No 1.98 above but in repairs. |
| 101 | S&F 100 mm size swivel shower rose of ABS, chromium plated with long head arm for fixing with 15 mm pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 102 | All as per Sl item No 2.00 above but in repairs. |
| 103 | S&F towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 104 | All as per Sl item No 2.02 above but in repairs. |
| 105 | S&F in repairs 15 mm bore gun metal globe or gate valve with iron wheel head screwed both ends foriron pipe and fixed complete all as specified and directed.Make:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya |
| 106 | S&F central hole basin mixer, brass, chromium plated, for mixing hot and cold water, with 450 mm Long Braided Hoses, screwed down for 15 mm bore pipe complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 107 | S&F brass chromium plated wall mixerwith connecting legs and wall flanges for 15 mm bore pipe complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 108 | All as per Sl item No 2.06 above but in repairs. |
| 109 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 125 mm wide & 500 mm long, with brass chromium plated bracket guard and railing complete all as specified and directed.Make:- Prayag, Cat No. - BEA-45 or equivalent in Essco / Hindware (Less Italian Collection) / Cera (Med Range) |
| 110 | All as per Sl item No 2.08 above but in repairs. |
| 111 | S&F vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closedpattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed.Make of Water Closet:- Hindware / Cera (Med Range) / EsscoMake of Seat cover:- Hindware, Model -Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco |
| 112 | All as per Sl item No 2.10 above but in repairs. |
| 113 | S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc,complete all as specified and directed. Make of wash hand basin:- Hindware / Cera (Med Range) / EsscoMake of waste fitting - Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 114 | S&F PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Hindware / Cera (Med Range) / EsscoMake of Bend Pipe:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco |
| 115 | All as per Sl item No 2.13 above but in repairs. |
| 116 | S&F PVC connections 15 mm size with PTMT nuts, of length 450 mmcomplete all as specified and directed.Make:- Prayag Cat No.- 323-TK or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 117 | S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixedto floor trap complete all as specified and directed.Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 118 | S&F 32 mm bore waste coupling of PTMT (half or full threaded) (minimum weight 45gms) complete all as specified and directed.Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 119 | S&F 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf / cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed.Make:- Supreme / M/s Ori-Plast Limited / M/s SHK Polymers |
| 120 | S&F rotational moulded polyethylene water storage tanks of 1000 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.Make of tank:- Sintex / Polycon / Oriplast / JindalMake of ball valve:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 121 | All as per Sl item No 2.19 above but in repairs. |
| 122 | S&F in repairs sink made of stainless steel 1 mmthickkitchenorlaboratory with plugs, washers and wastes; includingbeddingincement mortarontodwarfwallor including fixing cantilever brackets andconnectinguniontopipe, overall size 495 x 420mmbowl size 405 x 355 x 178 mm complete all as specified and directed. Make:- M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s Bluestar Sanitary Industries Pvt Ltd / M/s JMD International (Brand D-sons)M/s Bluestar Sanitary Industries Pvt Ltd, Cat No. - BSSB-06A |
| 123 | S&F in repairs kitchen plate rack made out of 0.63 mm stainless steel sheet & of size not less than 24\" x 30\" x 10\", standard quality fixed with brass screw complete all as specified and directed. Make:- M/s Bluestar Sanitary Industries Pvt Ltd, Cat No. - BSKPR-311 or equivalent in M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s JMD International (Brand D-sons) |
| 124 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 125 | All as per Sl item No 2.23 above but in repairs. |
| 126 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 127 | All as per Sl item No 2.25 above but in repairs. |
| 128 | S&F PVC (SWR) 75 mm bore bend of any radiuscomplete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 129 | All as per Sl item No. 2.27 above but110 mm bore. |
| 130 | S&F in repairs 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white laminated fixed with screw to timber / aluminium frame work complete all as specified and directed.Make:- Kitply / Bhutan Board / Novapan / Greenply |
| 131 | All as per Sl item No 2.29 above but 18 mm thick. |
| 132 | S&F 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 133 | M&L making good broken / damaged RCC chajjas with PCC 1:2:4 type B1 or cement mortar 1:3 and including rendering 15 mm thick in CM 1:4 mixed with water proofing compound as per manufacturer\"s instruction to top, sides and soffits, including necessary scaffolding, formwork upto 3 storey height complete all as specified and directed.Note:- Water proofing compound shall be measured and paid seperately |
| 134 | S&F in repairs 20 mm dia curtain rod, mild steel, chromium plated complete all as specified and directed. |
| 135 | S&F in repairs fancy type mild steel, chromium plated brackets / clamps to be fixed at walls for holding curtain rods & corners to be fixed at ends of curtain rod 20 mm dia with necessary screws complete all as specified and directed.Note :- 2 Nos bracket and 2 Nos corners shall be measure as one pair |
| 136 | BOQ Part-II (E/M Work) |
| 137 | Taking down copper / aluminium concealed point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit, cutting chasing as required and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 138 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 139 | All as per Sl. item No. 3.02 above but for one 5 / 6 Amps socket outlet point on same board. |
| 140 | All as per Sl. item No. 3.02 above but for one 5 / 6 Amps socket outlet point on independent board. |
| 141 | All as per Sl. item No. 3.02 above but for one light point controlled by two, 2 - way switches. |
| 142 | M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board andincluding cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 143 | Taking downcopper / aluminium concealed sub main wiringcomplete with all fixture and fittings including cutting chasing as required and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 144 | M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 145 | All as per item No. 3.08 above but with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire. |
| 146 | All as per item No. 3.08 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire. |
| 147 | S&Fswitch pianoflush typeone way, 5 / 6 Amps, 240 voltcomplete all as specified and directed.Make :- Havells / Anchor / Legrand |
| 148 | All as per item No. 3.11 above but two way switch. |
| 149 | S&F socket outlet 5 pin 5 / 6 Amps, 240 voltscomplete all as specified and directed. Make :- Havells / Anchor / Legrand |
| 150 | S&F switch socket combination2 in 1,6 Pin, 5 & 15 Amp, flush type universal complete all as specified and directed.Make :- Havells / Anchor / Legrand |
| 151 | S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed.Make :- Havells / Anchor / Legrand |
| 152 | S&F ceiling rose, surface bakelite 65 x 50 mm three terminalcomplete all as specified and directed.Make:- Havells / Anchor / Legrand |
| 153 | S&F bell push one way, 5/6 Amp,240 V complete all as specified and directed.Make :- Havells / Anchor / Legrand |
| 154 | S&F call bell, ding dong,AC 240 V, single pole complete all as specified and directed.Make :- Havells / Anchor / Legrand |
| 155 | S&Fangular lamp holder, PVC / Polycarbonate type with back plate for fixing of retrofit lamp 240 volt complete all as specified and as directed.Make :- Havells / Anchor / Legrand |
| 156 | S&F 9 watt LED bulb, inverter (backup) type, A19 shape with B22 base 230 Volts, battery with minimum 4 hrs backup time, frosted diffuser, suitable for surface mounting, total system lumen 900 Lm (minimum) on supply and 400 Lm (minimum) on battery, colour temperature 6500K (minimum), CRI 80 (minimum) complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 157 | S&F LED light fitting 1 x 18 / 20 watt batten type 230 Volts, 4 feet long, extruded polycarbonate housing & extruded polycarbonate diffuser, suitable for surface mounting, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP 20,PF 0.90 (minimum), THD 20% (Maximum), with in-built electrnoic driver with APFC, in-built surge protection 2 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 158 | All as per Sl item No 3.21 above but in repairs. |
| 159 | S&F LED light fitting 1 x 9 / 10 watt, 230 Volts, 2 feet long, extruded aluminium housing & extruded polycarbonate diffuser, suitable for surface mounting, system efficacy 100 Lm/watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 10% (Maximum), with integrated high effeciency electrnoic driver with APFC, in-built surge protection 5 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 160 | All as per Sl item No 3.23 above but in repairs. |
| 161 | S&F 9 / 10 watt LED Bulk head fitting including electronic driver and SMD LED lamp, polycarbonate housing & opal polycarbonate diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP-65, PF 0.95 (minimum), THD 10% (maximum), in-built surge protection 5 KV (minimum) including electrically connecting from celing rose to light fitting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 162 | All as per Sl item No 3.25 above but in repairs. |
| 163 | S&F decorative wall mounted light fitting, spherical shape, suitable for 1 x 9 watt LED (B-22 base) with opal White PC diffuser including one 15W CFL (spiral), electrically connecting & taking down complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 164 | S&F LED street / security light fitting 1 x 20 watt,integrated typewith high efficiency electronic driver, pressure die cast aluminium housing & PC diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 70 (minimum),IP-65 (minimum), PF 0.90 (minimum), THD 10% (Maximum),in-built surge protection 5 KV (minimum) internally prewired and including electrically connectingcomplete all as specified & directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 165 | All as per Sl item No 3.28 above but in repairs. |
| 166 | S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, with 100A copper neutral and earth bus bar for fixing MCB fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand |
| 167 | S&F VTPN DB, 4 way, IP-43, IK 09, double door type with metal door, with 250 A copper neutral and earth bus bar, suitable for fixing upto 250 Amp MCCBs as incomer including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand |
| 168 | S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve & complete all as specified and directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand |
| 169 | All as per Sl item No 3.32 above but in repairs. |
| 170 | S&F MCB SP 6 to 32 Amp, 10 kA, 240V\"C\" curve complete all as specified and as directed.Make :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand |
| 171 | All as per items No 3.34 above but MCB SPN 40 to 63 Amp. |
| 172 | S&F MCCB 4 pole 125 Amps breaking capacity 16 KA, Ics = 100% Icu including spreader link complete all as specified and directed.Make :- L&T / Havells (Brand- HIM & HIX) / Panasonic/ Hager / ABB / Legrand |
| 173 | M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and complete all as specified and directed.Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc. |
| 174 | All as per Sl item No 3.37 above but in repairs. |
| 175 | S&F 40 mm bore galvanised steel tubing, light grade with necessary fittings, fixed along electric pole etc, for cable protection complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 176 | All as per Sl item No 3.39 above but in repairs. |
| 177 | S&F ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated, with BLDC technology, AC single phase 230 V, 350 RPM, air delivery 220 m³/minute (minimum), with and including smart remote with long lasting batteries to control speed etc.,suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed.Make :- Havells, Model - EFFICIENCIA NEO or equivalent inOrient / Ram Ratna Electricals Ltd (RRE)Note:- Old ceiling fan shall be deposited to MES store. |
| 178 | All as per Sl item No. 3.41 above but in repairs. |
| 179 | S&F exhaust fan 300 mm sweep, metal body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint, enlarging existing hole in the wall as required, making good the disturbed surface to match the existing surface & taking down complete all as specified and directed.Make:- Havells, Model - Ventil Air - DSP or equivalent in Orient / Ram Ratna Electricals Ltd (RRE) |
| 180 | S&F single pase kWh meter with LCD display of rating 5-30 A with optical port and box including taking down complete all as specified and directed.Make:- L&T , WM101BC5DDHBOX or equivalent in Havells India Ltd. / HPL India Ltd. / Legrand / AE / Schneider / BCH |
| 181 | Taking down ceiling fan of 1200 / 1400 mm sweep, supply & replacement of ball bearing and spray painting with approved colour, lubricating, re-fixing and making electrical connection with three core PVC insulated unsheathed flexible cord of 1 Sqmm copper conductor complete all as specified and directed.Note :- Supply of Ball bearing of suitable size, lubricants etc, isdeemed to be included in quoted rate.Make of bearing :- Tata / SKF / NBCMake of paint :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 182 | S&F geyser of capacity 25 Litres, 230V, 50Hz, wall mounted type, BEE 5 star rated, temperature sensitive colour changing LED indicators, touch temperature control panel & remote control for temperature setting, digitaltemperature indicating LED display, ABS outer body, inner tank with glasslined coated, incoloy glass coated heating element, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin, 16Amp shock resistant plug, fixing arrangement such as bracket, nuts, bolts washers, 2 nos flexible connection pipe etc. including taking down complete all as specified and directed.Make:- V-Guard / Bajaj / Usha / Crompton Greaves / Jaquar & Company Pvt. Ltd. |
| 183 | S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed.Make:- Prayag Cat No.- 323-HK or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 184 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 35 Sqmm x 3.5 Core, laid in trenches / duct / on pole including taking down complete all as specified and directed.Make :- Havells / KEI / Polycab |
| 185 | Supply & laying sub class \"B\" bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed. |
| 186 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
AI Tender Summary
Tender Timeline
Oct 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender