Bids Are invited for Electrodynamic shaker - 1000kgf peak Sine, Frequency 2 Hz to 3000 Hz, Displacement 30 mm, Bare Table Acceleration 50`g’ Sine, Auto centering,Power amplifier, cooling system, vibration controller, signal generator (standard and user de-Delhi

Bids Are invited for Electrodynamic shaker - 1000kgf peak Sine, Frequency 2 Hz to 3000 Hz, Displacement 30 mm, Bare Table Acceleration 50`g’ Sine, Auto centering,Power amplifier, cooling system, vibration controller, signal generator (standard and user defined), connectors and base plate 500 x 500 mm. , Single axis accelerometers - ICP type accelerometers upto 16 g vertical acceleration and workable frequency range upto 5000 Hz. , Tri axial accelerometers - 50 g acceleration limit, should come with mounting studs, with sensitivity of atleast 100 mV/g or above along with 10 ft. BNC cable or longer. , Impact hammer - 80-100 lbf range with a sensitivity of atleast 50 mV/lbf. Should come with BNC connector with additional impact tips and teflon jacket. , Vehicle data acquisition system - Atleast 1000Hz Data Logging system with inbuilt gyro sensor for measuring roll, pitch and yaw rates. Should have atleast 4 analog input channels and four channels to measure frequency inputs (typical wheel speeds coming from the encoders). , Vibration data logger - 8 analog inputs, differential measurement inputs, voltage and current signals with a sampling rate of atleast 100 kHz and 5 kHz band width per channel. Should be able to measure both voltage and current signals and come with an inbuilt voltage sensor supply along with memory card for data logging. , Wheel speed encoder - Wheel pulse transducer for measuring wheel speeds. Should have IP67 protection; 5-15V DC supply and come with universal mounting assembly compatible with wheels of different sizes. , Steering measuring wheel - Steering wheel for measuring steering torques upto 50 N-m in addition to the steering angle and angular rate. Should come with a universal mounting compatible with steering wheels of different sizes. , Computer - The system should be supplied with an All in one PC, Intel i5 Processor, Windows 10, 8Gb RAM or better. Total Quantity : 1

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	08-Nov-2021			11-11-2021

Refer document

Refer document

Refer document