Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22 Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22, Rourkela-Odisha

TDR : 29635873

Tender Notice
BOQ

Expired

Rourkela , Odisha

Tender Brief : Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22 Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22

Document Fees
₹ 10000 /-

EMD
Refer document

Tender Value
₹ 91.67 Lakhs /-

Submission Date
29-10-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth Workinexavationoffoundation in oridinary soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor\"s profit and over head charges, etc. complete in all respect
2	Filling in F & P with excavated materials including watering and ramming as directed by the Engineer-n-charge. For 100cum
3	Filling in F & P with sand watered and rammed. Per 1 cum (Data for 100cum)
4	Cement Concrete (1:4:8) using 4cmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
5	Cement Concrete (1:3:6) using 12mmsize hard granite H.B. chip approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
6	R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying
7	Foundation
8	Columns Base & Footings
9	R.C.C. Column / Beam
10	Ground Floor
11	1st Floor Qty.
12	R.C.C Roof Slab
13	Ground Floor
14	R.C.C Chajja
15	Ground Floor
16	R.C.C Walls
17	2nd Floor Qty.
18	Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. Per 1 MT. (Taking out put = 1MT)
19	Ground Floor
20	1st Floor Qty.
21	2nd Floor Qty.
22	Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete.
23	Foundation
24	Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) above plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete.
25	Ground Floor
26	Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) above Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete.
27	Ground Floor Qty.
28	12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C.
29	Ground Floor Qty.
30	16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C.
31	Ground Floor Qty.
32	6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C.
33	Ground Floor Qty.
34	12mm thick cement plaster (1 : 4) over brick work with cement punning for skirting etc. all complete under instruction of EIC
35	Ground Floor Qty.
36	Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C.
37	Anti Skid Ceramic Tiles (300x300) mm
38	Ground Floor Qty.
39	Kota Tiles
40	Ground Floor Qty.
41	Anti-Skid / Matte Finish Tile (600x600) mm
42	Ground Floor Qty.
43	Fixing tiles in skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
44	Anti-Skid / Matte Finish Tile (600x600) mm
45	Ground Floor Qty.
46	Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
47	Ceramic Tiles
48	Ground Floor Qty.
49	Priming one coat with any approved primmer including cost of primmer & labour to give an even shade excluding cost of primer.
50	Ground Floor Qty.
51	Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labouretc, complete as per specification & direction of Engineer-in-charge.
52	Ground Floor Qty.
53	Finishing wall surface with two coat of Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete.
54	Ground Floor Qty.
55	Priming 1 coat with wallprimer water bond cement primer including all labour, materials etc. complete.
56	Ground Floor Qty.
57	Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade exculding cost of paint (For 10 Sqm.)
58	Ground Floor Qty.
59	Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
60	Ground Floor Qty.
61	Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 1.5mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg / Sqm, applying and laying plastic felt membrane with 10 c.m overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete.
62	Ground Floor Qty.
63	Extra for pre finished nosing in treads of steps of Kota stone slab.
64	4 cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old & New work.
65	Ground Floor Qty.
66	Cement Concrete (1:2:4) using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
67	Ground Floor Qty.
68	Providing and fixingunplasticated polyvynile cloride (UPVC) casement -60-serieseDoors duly manufactured using UPVC reinforce profile of 60mmx55mmx2.50mm for outer frame etc as per specicfication.
69	Doors
70	Providing and fixingunplasticated polyvynile cloride (UPVC) casement windows-60-seriese duly manufactured using UPVC reinforce profile of 60mmx55mmx2.50mm for outer frame etc as per specicfication.
71	Windows
72	Dismantling and removing Cement Concrete and R.C.C. in all locations including stacking the useful materials for reuse and removing the debris within 50m lead as suggested by School Management Committee.
73	Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead as suggested by School Management Committee.
74	Dismantling G.C.I. or A.C. sheet roofing after carefully removingthe bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead.
75	Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead etc. all complete
76	Dismantling brick masonry in cement mortar 3m. Height including stacking the useful materials for reuse and removing the debris within 50m. Lead as suggested by School Management Committee.
77	Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) above plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete.
78	Ground Floor
79	16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C.
80	Ground Floor Qty.
81	12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C.
82	Ground Floor Qty.
83	6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C.
84	Ground Floor Qty.
85	12mm thick cement plaster (1 : 4) over brick work with cement punning for skirting etc. all complete under instruction of EIC
86	Ground Floor Qty.
87	Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C.
88	Kota Tiles
89	Ground Floor Qty.
90	Anti-Skid / Matte Finish Tile (600x600) mm
91	Ground Floor Qty.
92	Anti Skid Ceramic Tiles (300x300) mm
93	Ground Floor Qty.
94	Vitrified Tiles
95	Ground Floor Qty.
96	Fixing tiles in skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
97	Anti-Skid / Matte Finish Tile (600x600) mm
98	Ground Floor Qty.
99	Vitrified Tiles
100	Ground Floor Qty.
101	Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
102	Ceramic Tiles
103	Ground Floor Qty.
104	Priming one coat with any approved primmer including cost of primmer & labour to give an even shade excluding cost of primer.
105	Ground Floor Qty.
106	Painting two coats with approved paint on old wood work with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labouretc, complete as per specification & direction of Engineer-in-charge.
107	Ground Floor Qty.
108	Painting two coats with approved paint on old iron work with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labouretc, complete as per specification & direction of Engineer-in-charge.
109	Ground Floor Qty.
110	Finishing wall surface with one coat of Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete.
111	Ground Floor Qty.
112	Priming 1 coat with wallprimer water bond cement primer including all labour, materials etc. complete.
113	Ground Floor Qty.
114	Wall painting 1 coat with plastic emulsion paint of approved shade on old work to give an even shade exculding cost of paint.
115	Ground Floor Qty.
116	Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
117	Ground Floor Qty.
118	Cement Concrete (1:2:4) using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
119	Ground Floor Qty.
120	Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead etc. all complete
121	Earth Workinexavationoffoundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor\"s profit and over head charges, etc. complete in all respect
122	Filling in F & P with excavated materials including watering and ramming as directed by the Engineer-n-charge. For 100cum
123	Cement Concrete (1:4:8) using 4cmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
124	R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying
125	Foundation
126	Columns Base & Footings
127	R.C.C. Column / Beam
128	Ground Floor
129	Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. Per 1 MT. (Taking out put = 1MT)
130	Ground Floor
131	Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) above plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete.
132	Ground Floor
133	16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C.
134	Ground Floor Qty.
135	Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
136	Ground Floor Qty.
137	Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
138	Cement Concrete (1:2:4) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
139	Cement Concrete (1:4:8) using 4cmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
140	Ground Floor
141	Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) above plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete.
142	Ground Floor
143	12mm thick cement plaster (1 : 4) over brick work with cement punning for skirting etc. all complete under instruction of EIC
144	Ground Floor Qty.
145	Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C.
146	Kota Tiles
147	Ground Floor Qty.
148	Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
149	Ground Floor Qty.
150	Providing & laying of 80mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand ,filling the joints with fine sand etc. all compelte includingcost, conveyance, royalty, taxes of all materials,labour,T & P etc.Complete as per direction of EIC.
151	Ground Floor Qty.
152	PH
153	Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing, cost & conveyance of all materials to worksite, payment of all taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.
154	20mm dia G.I.pipe
155	25mm dia G.I. pipe
156	32mm dia G.I. pipe
157	40mm dia G.I. Pipe
158	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes, confirming to ASTM - D - 1785 . 89 (sch 80) and pipe fitting of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
159	15mm dia C- PVC Pipe
160	20mm diaC- PVC Pipe
161	25mm diaC- PVC Pipe
162	32mm diaC- PVC Pipe
163	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
164	15mm dia CP angle stop cock (PLAZA MAKE)
165	15mm dia CPbib cock (PLAZA MAKE)
166	25mm dia brassfull way valve (Jaquar)
167	32mm dia brassfull way valve (Jaquar)
168	40mm dia brassfull way valve (Jaquar)
169	125mm CP grating
170	15mm CP Extension piece
171	15mm size C.P. flange
172	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
173	1000 liters capacityPVC water storage tank (sintex)
174	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
175	Ground floor
176	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
177	Ground floor
178	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
179	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
180	110mm U-PVC‘P’ Trap (Ori Plast/Finolex/Supreme Make)
181	110mm U-PVC door bend (Ori Plast/Finolex/Supreme Make)
182	110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make)
183	110mm U-PVC offset without ear (Ori Plast / Finolex / Supreme Make)
184	110mm U-PVC Cowl (Ori Plast/Finolex/Supreme Make)
185	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
186	580mm size Orissa pan (Hindware/Parryware/Neycer make)
187	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.
188	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
189	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal.
190	Stall urinal
191	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
192	European water closet with \"p\" trap plain (Hindware / Parryware / Neycer make)
193	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
194	550mmx400mm W.H.basin (Hindware / Parryware / Neycer make)with 15mm dia C.P.pillar cock (Plaza make).
195	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge (ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge)
196	Ceramic tile 40cmx40cm (Kajaria Make)
197	Supplying all materials,labour,T&P and providing 12mm thick cement plaster (1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
198	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
199	Glazed tile 40cmx25cm (Kajaria make)
200	Providing fitting and fixing of Aluminium door with anodized AL. door section of 9202 as vertical member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No.1855 Including all cost of Laboure .T&P hire charges of driling machine laboure charges etc . complete.Ref: OBI10
201	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
202	Supplying all materials, labour, T&P and fixing standard sized Grab Bar complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
203	450MM AHS-CHR-1507 (JAQUAR)
204	GRAB BAR WAC-WHT-BAS-090 (JAQUAR)
205	Supplying all materials, labour, T&P and constructing Inspection Chamber ofinside size 760mm x 760mm x 460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
206	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
207	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
208	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
209	110mm dia P.V.C. pipe
210	160mm dia P.V.C. pipe
211	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
212	MH size 0.91m x 0.91x0.91 m with 0.45 m (18” dia RCC Cover)
213	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
214	1.40m dia x 2.00 m deep
215	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
216	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft.
217	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
218	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
219	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
220	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
221	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
222	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
223	RCC floor, roof slab chhaja up to 4.430 m height
224	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar (1:3) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
225	Supplying all materials,labour,T&P and providing 12mm thick cement plaster (1:3) on brick work including watering, curing, cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
226	Supplying all materials, labour, T&P and providing cement punning including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge
227	Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC (1:2:4) for fixing etc. complete as per PH specification.
228	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
229	E.I. WORKS
230	Recessed wiring to Light Point / Fan Point / Exhaust Fan Point / Call Bell Point with 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.0 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked as earth wire including all accesories and connection as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)
231	a)Light Point
232	Midium
233	b) Celling fan point
234	Midium
235	Recessed wiring for 5 / 6 Amp socket outlet with 2 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked, Phenolic laminated sheet of suitable size ISI marked MS box and earthing point with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor for loop earthing etc. as required, as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)
236	Short
237	Recessed wiring for 15 / 16 Amp socket outlet with 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked, Phenolic laminated sheet of suitable size ISI marked MS box and earthing point with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor for loop earthing etc. as required, as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)
238	Long
239	SUB-HEAD II :- CONDUITINGFOR TELEPHONE, INTERCOM & DATA
240	CONDUITING FOR TELEPHONE, INTERCOM & DATA
241	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
242	25 mm
243	TELEPHONE/ INTERCOM WIRING
244	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
245	2 Pair
246	TELEPHONE TAG BLOCK
247	Supply, installation, testing & commissioning of telephone tag blocks with \"KRONE\" terminal connectors fixed in 16G powder coated, hinged, lockable door, sheet steel enclosure including civil work such as chase cutting, fixing/ concealing the box and making good as required including terminations:
248	10 pair tele tag block
249	TELEPHONE / INTERCOM OUTLET - MODULAR TYPE
250	Supplying and fixing telephone socket outlet piano type ISI marked on the existing switch board / cover including connections etc as requird.
251	Telephone socket outlet
252	OUTLET BOXES FOR TELEPHONE / INTERCOM OUTLET
253	Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recessetc. as required.
254	1 or 2 Module
255	DATA POINT
256	Supply, Installation testing and commissioning RJ - 45 Computer Jack cat 6 with shutter Modular (1Module)
257	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required
258	1 run of cable
259	L+PDB - (12WAY SPN -DB) DOUBLE DOOR
260	Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)
261	12 way , Double door
262	Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C\" series,miniature circuit breaker (MCB)suitable for inductive load offollowingpolesin the existingMCBDBcomplete with connections, testing andcommissioning etc. as required.
263	single pole
264	Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existingMCBDBcomplete with connections, testing andcommissioning etc. as required.
265	40 amps.
266	Supplying and fixing following rating, Single/ double/ three pole, 230/ 415 volts, MCB \"C\" curve in the existing MCB DB complete with connections, testing and commissioning etc. as required.
267	40 amps FP MCB
268	SUB-HEAD IV :- CIRCUIT/ SUBMAIN WIRING
269	Recessed wiring to Sub-Main in 2 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)
270	2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire
271	Recessed wiring to Sub-Main in 2 X 6.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)
272	2 X 6 sq. mm + 1 X 2.5 sq. mm earth wire
273	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
274	32 mm
275	SUB HEAD V :-LIGHT FIXTURE & FAN
276	Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 12 Watt LED Down Lighter having Powder coated diecast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.
277	Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light complete including tube etc on surface complete in all respect.
278	Supply and Fixing of 10W LED Bulb & fixture with all interconnections of approved makes and fixing arrangements as required
279	Supply, Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.
280	Supply, Installation, Testing & Commissioning of1200mm Ceiling Fan

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22 Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22, Rourkela-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22 Development Of Education Infrastructure Of Bonaikela Ug High School, Bonaigarh In Sundargarh District For The Year 2021-22, Rourkela-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us