|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 2 | Filling in plinth and floors with Contractors material / brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 3 | Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting complete. |
| 4 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water , formwork, laying / pumping, compacting , roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. with fine aggregate (Natural sand / V.S.I Artificial sand.) |
| 5 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 6 | Providing and laying cast in situ/ Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering,plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 7 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 8 | Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . |
| 9 | Providing and laying in Situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C Beam and lintelas per detailed design and drawing or as directed including centering, formwork, cover blocks , laying / pumping compaction androughening the surface if special finish is to be provided and curing etc. complete. .(Excluding reinforcement and structrual steel)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc.) |
| 10 | Providing and laying in Situ / Ready Mix cement concrete M-20 oftrap/ granite/ quartzite/ gneiss metal for R.C.C Slabs and landingsas per detailed designs and drawings or as directed including fixing plastic cover block of required size at 27 Nos in per 10 Sqm to reinforcement to give a clear cover 15 mm in RCC slabs fixing fan hook box of 100 mm dia PVC or MS material with required depth with holes or notches as required, bottom with 12 mm dia M.S Bar bent to shape with fooked ends for fan hook and painting to exposed surface, centeringformwork of steel , compaction, covering newly laid concrete by gunny bag , plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structrual steel)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. with fine aggregate (Natural sand / V.S.I Artificial sand.) |
| 11 | Providing and fixing in position TMT-Fe-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete . |
| 12 | Providing internal cement plaster 12 mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 13 | Providing internal cement plaster 20 mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 14 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 15 | Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in one coat including scaffolding, preparing the surfaces. (excluding the primer coat.)etc. complete. |
| 16 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 17 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 18 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 19 | Providing soak pit of size 120 cm x 120 cm x 120 cm including excavating and fillling wirh bricks-bats. |
| 20 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) |
| 21 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 22 | Providing & fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats complete.Including necessary scaffolding and removing existing |
| 23 | Providing and fixing screw down 15 mm dia wheeled stop trap of brass including necessary sockets / union nut complete. |
| 24 | Providing and fixing board displaying information , such as Name of work Tender cost, Name of contractor , work completeion and liability period etc. having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm ) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side on border / messages / symbols etc. with approved colour shade paint complete, on M.S angle of size 35 x 35 x 3 mm frame with properly cross braced M.S angles of size 35 mm x 35 mm x 3 mm duly painted including two M.S angle iron posts of size 65 mm x 65 mm x 6 mm , 3.65 m long painted with alternate block and while bands on 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation, refilling, transportation and labour etc. complete. Spec. No. As directed by Engineer in charge. |
| 25 | Royalty ChargesA) other |
| 26 | Royalty Charges B) Sand |
| 27 | Testing Charges |
| 28 | Labour Insurance - Payment should be made as per actual receipt. |
| 29 | GST - Payment should be made as per actual receipt. (For item No. 33 to 57) |
