2021-22 Nallepilly Gp Nallepilly Lp School To Cherumkad Road Retarring And Interlock. 2021-22 Nallepilly Gp Nallepilly Lp School To Cherumkad Road Retarring And Interlock.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2021
0 days left
EMD
13390
Bank guarantee accepted
Document Fee
1790
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nallepilly → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
2021-22 Nallepilly Gp Nallepilly Lp School To Cherumkad Road Retarring And Interlock. 2021-22 Nallepilly Gp Nallepilly Lp School To Cherumkad Road Retarring And Interlock.
BOQ
| Sl. No. | Item Description |
| 1 | Re tarring |
| 2 | od1309131/2021_2022 : Filling up pot holes(cut and formed to regular shapes and all loose materials removed)after supplying a prime coat of hot bitumen using 36mm brocken stone and compacting with power roller to get a compact surface |
| 3 | 75.5.2.2pb : Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 4 | 75.9.3.pb.pa : Plastic roads- Packed Bitumen Rate 20mm thick Open-Graded Premix Carpetusing Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 -Packed Bitumen and Shredded Plastic Providing, laying and rolling of opengradedpremix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregateseither using penetration grade bitumen or emulsion to required line, grade and level toserve as wearing course on a previously prepared base, using HM Plant attached withopen pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, thentransferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hotbitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rollingwith a. three wheel 80-100 kN static roller capacity, finished to required level and gradesto be- followed by seal coat of either Type A or Type B or Type C as per TechnicalSpecification Clause 508 Case - I By Manual Means (II) Bitumen (S-65) |
| 5 | 75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 A. By Manual Means CaseIII :Type C (II) Bitumen (S-65) |
| 6 | od1309243/2021_2022 : Surface dressing of the ground including removing vegitation and in-equalities not exceeding 15cm deep and disposal of rubbish,lead upto 50m and lift upto1.5m in all kinds of soil |
| 7 | od1309244/2021_2022 : granular sub-base/base/surface course with local materials(Table400.13)by mix in place methode normal. construction of granular sub-base by providing local material spreading in uniform layersmanually mixing by mix in place methode and compacting with rammers to achieve the desired density complete as per clause 401.4 as per Technical specification Clause408 |
| 8 | 6.7.1 : Interlocking Concrete Block Pavement Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 9 | 75.8.1 : Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4) |
| 10 | name board |
| 11 | od1309130/2021_2022 : Supplying and providing GI name board with all conveyance labour and higher charges etc complete using GI tube of size 80x40x1.4mm post,40x20x1.4mm outer frame, 0.6mm thick iron sheet of size90x60cm with two coat of enamel painting over a coat of primer,lettering with suitable colour and size, fixing the post in ground with CC 1:2:4 |
AI Tender Summary
Tender Timeline
Oct 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender