Military Engineer Services-MES has published Repair To Steel And Wooden Furniture And Re-Canning Of Chairs At Jindrah And Dhansal Under Ge ( Army ) Dhar Road- 1 Bed Ply Wood Top ( Drg No Fd-246 / 247 ) :- S&F In Repair Following Parts Of Bed Ply Wood Top As Per Existing Shape And Size Du. Submission Date for this Tender is 16-11-2021. Machine Tools Tenders in Jindrah and Dhansal under GE Army Dhar Road Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 09-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-11-2021 |
Sl. No. | Item Description |
1 | BED PLY WOOD TOP (Drg No FD-246/247):- S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. |
2 | Head rest shall be made as per drg |
3 | Foot Rest shall be made as per drg |
4 | Long rails shall be made of Ist class hard wood (Shisham) |
5 | Short rails shall be made of Ist class hard wood (Shisham) |
6 | Stiffener shall be made of Ist class hard wood (Shisham) |
7 | MS bracket of flat iron 25x3mm,200mm long fixed with screw |
8 | Ply wood top 12mm thick BWR plywood as per existing shapeand size in one piece |
9 | M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces |
10 | CHAIR DINING (Drg No FD-16(M)/ 203/ 279) ;-S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;- |
11 | Rear Legs |
12 | Front Legs |
13 | Side rail of seat frame includingdrilling holes for weaving (spacing of holes shall be as per existing) |
14 | Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing) |
15 | Bottom stiffener |
16 | Back stiffener |
17 | M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed. |
18 | CHAIR WRITING (Drg No FD-20(M)/202 /280):- S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. |
19 | Rear legs |
20 | Front Legs |
21 | Side rail of seat frame including drilling holes for weaving(spacing of holes shall be as per existing) |
22 | Front/Back rails of seat frame including drilling holes for weaving(spacing of holes shall be as per existing) |
23 | Bottom stiffener |
24 | Back stiffener |
25 | Arm rest |
26 | M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparationcomplete all as specified and directed. |
27 | CHAIR DINING(MAP) (Drg No FD/E6/MAP/10 & FD/E6/MAP/ 10 (R) );-S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;- |
28 | Rear Legs |
29 | Front Legs |
30 | Side rail of seat frame |
31 | Front/back rails of seat frame |
32 | Foam cushioned of 75mm, 40 density with fabric on seat of 12mm thick ply |
33 | Bottom stiffener |
34 | Vertical back stiffener |
35 | Nylon buffers on the bottom of legs |
36 | M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed. |
37 | CHAIR EASY (Drg No FD-17(M)/201 /229):S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;- |
38 | Rear Legs |
39 | Front Legs |
40 | Side Rails |
41 | Front/Back Rails |
42 | Back Stiffener |
43 | Bottom Stiffner |
44 | Arms rest |
45 | M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed. |
46 | REPAIR OF TEAPOY (Drg No FD-232/ 278/382) : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed:- |
47 | Legs |
48 | Long rail |
49 | Short rail |
50 | Side stiffener |
51 | Centre stiffener |
52 | Top-Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed |
53 | M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed. |
54 | REPAIR OF PEG TABLE (Drg No FD-236/266 /277/384) :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed |
55 | Legs |
56 | Long rail |
57 | Short rail |
58 | Side stiffener |
59 | Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed |
60 | M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed. |
61 | TABLE WRITING (Drg No FD-275) : S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.;- |
62 | Legs |
63 | Long rail of table frame |
64 | Short rail of table frame |
65 | Drawer including chromium plated knob of 40mm Dia |
66 | Bottom centre stiffener |
67 | Bottom side stiffener. |
68 | Taking out old U/S top and S&F new top of pre-laminated particle board one side teak wood face incl 6mm thick teak wood beadging all roundtop duly high class French polished complete all as shown in drg and directed. |
69 | M&L for polishing of table writing with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed. |
70 | REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER (Drg No FD-231/284):- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly plannedas shown on drg complete all as spcd and directed |
71 | Legs |
72 | Long Rail |
73 | Short Rail |
74 | Bottom Side stiffener |
75 | Bottom Centre stiffener |
76 | Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed |
77 | M&L for polishing of table900x600mm w/o drawer with highclass French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed |
78 | REPAIR TO TABLE DINING 06 PERSON (Drg No FD-239/269 /273) :- S&F in repair of following parts of table dining 06 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specifiedand directed. |
79 | Taking down old U/S top of table dining 06 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed. |
80 | Legs |
81 | Long rail |
82 | Short rail |
83 | Stiffener |
84 | M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed. |
85 | REPAIR TO GI PIPE CHARPOY WITHHARD PLYTOP (Drg No FD-32 (M)/ 251/ 220) S&F in replacement of u/s plywood BWR grade, 12mm thick including fixingwith 6mm dia 65mm long brass coated nuts & bolt with 02 Nos washers complete all as specified and directed. |
86 | S&F in replacement of u/s Elbow galvanized iron 32 mm dia 3 ways complete all as specified and directed. Note weight of each elbow not less than 450 grams |
87 | S&F in replacement of u/s check nut galvanized iron 32 mm dia, complete all as specified and directed Note :- weight of each check nut not less than 125 grams |
88 | S&F in replacement of long rail of 32 mm dia galvanized iron pipe medium grade incl cutting threading at both ends complete all as specified and directed |
89 | Fixing only in repairs short rail of 32 mm dia GI pipe medium grade incl cutting, threading as required for short rail of GI Charpoy complete all as specified and directed Note :- short rail shall be converted from long rail retrieved vide item No 11.03 here-in-before |
90 | Fixing only in repairs legs of 32 mm dia GI Pipe medium grade cutting, threading at one end as required for legs as per existing size incl S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on another end complete all as specified and directed. Note :- Legs shall be converted from pipe retrieved vide item No 11(e) above. |
91 | REPAIR TO SIDE BOARD (Drg No FD-241 ): S&F in repair to the following parts of side board as per existing shape and size duly planned complete all as specified and directed. |
92 | Top |
93 | Bottom |
94 | Side |
95 | Shelves |
96 | Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board front |
97 | Shutter with 40mm size knob |
98 | Back shall be made of 6mm thick commercial plywood. |
99 | Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak) |
100 | M&L for polishing of side board with high class French polish on all exposedsurfaces except topand bottom incl after preparation of surfaces complete all as specified and directed |
101 | REPAIR TO TABLE CENTRE (Drg No FD-235/274):-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly planned as shown on drawing completed all as specified and directed;- |
102 | Legs |
103 | Long rail |
104 | Short rail |
105 | Side stiffener |
106 | Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 4mm thick wood beading all round the top complete all as specified and directed |
107 | M&L for polishing of Table Centre with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed. |
108 | REPAIR TO TABLE 900mm x 900mm (Drg No FD-88(M)/ 291):- S&F in repair following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed ;- |
109 | Legs |
110 | Long rail |
111 | Short rail |
112 | Table top of 18/19MM thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood edging all round complete as shownin drgand directed. |
113 | M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed. |
114 | REPAIR OF TABLE DRESSING GENTS (Drg NoFD-31 (M)/230);- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- |
115 | Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size. |
116 | Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size |
117 | Removal of old U/S Pre-laminated particle boardtop of table and fixing new 18mm th pre-laminated particle board as per existing shape & size. |
118 | Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size |
119 | REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES (Drg No FD-67 (M) /351 / 1031):-Removal ofold existing U/S shutter (Single Leaf) of almirah large steel and S&F new shutter made of 1 mm thick PBI sheet as per existing shape and size incl a coat of red oxide primer on both sideand preparation of new steel surfaces completeall as specified and directed. |
120 | All as per item No 16 above but Shelves |
121 | All as per item No 16 above but Cover plate of locks |
122 | Removing U/S lock of almirah large and S&F new brasslock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed |
123 | Removing of old U/S lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed. |
124 | Removing of old U/S handle of almirah and S&F new chromiumplated steel handle of existing shape and size complete all as directed |
125 | Removing of old U/S key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed. |
126 | Removing of old U/S leg of almirah large steel and S&F new leg made of 1 mm thick PBI sheet with Gas welding as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed. |
127 | M&L for painting spray painting of almirah large steelwith two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed. |
128 | REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES (Drg No FD-67 (M)/350 /1032/243) :- All as per item No16 here-in-before but shutter of Almirah Med |
129 | All as per item No16 above but Shelves of Almirah Medium |
130 | All as per item No16 above but Cover plate of locks of Almirah Medium |
131 | All as per item No16.03 above butlocks of Almirah Medium |
132 | All as per item No16.04 above but lock assemblyof Almirah Medium |
133 | All as per item No16.05 above but Handleof Almirah Medium |
134 | All as per item No16.06 above but Key Plate of Almirah Medium |
135 | All as per item No16.07 above but Legsof Almirah Medium |
136 | All as per item No16.08 above but Painting of Almirah Medium |
137 | LOCKER BED SIDE STEEL (Drg No FD-257/1029) All as per item No16 here-in-before but shutter of Locker steel |
138 | All as per item No16 above but shelves of Locker steel |
139 | All as per item No16.05 above but Handle "D" type of Locker steel |
140 | All as per item No16.07 above but Legsof Locker steel |
141 | All as per item No16.08 above but Painting of Locker steel |
142 | Removing of old U/S haps and stapple and S&F of new Chromium plated haps & stapple fixed with rivets of locker steel complete all as directed. |
143 | TABLE DINING OR"s (Drg No FD-165(M) ) Supply and fixing in replacement including welding mild steel square tube of size 25mm x 25mmx 1.6 mm thick as in frame complete all as specified as directed and as shown on drawing. |
144 | Supply and fixing in replacement of top with 18 mm thick block board of size 1900 mm x 685 mm with aluminium sheet 22 guage on top complete all as specified , as directed and as shown on drawing. |
145 | REPAIR TO CHAIR CB STEEL WITH ARMS (Drg No FD-75(M)) Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed. |
146 | All as per item No 20 here-in-before but back frame |
147 | Removal od old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard shisham wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed. |
148 | M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed. |
149 | REPAIR TO CHAIR CB STEEL WITH OUT ARMS (Drg No FD-75(M)) Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed. |
150 | All as per item No 21 here-in-before but back frame |
151 | M&L for painting to chair CB steel with out arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed. |
152 | REPAIR TO CHAIR VERANDAH (Drg No FD-256/259/ 359) S&F in repair following part of chair verandah as per existing shape and size as shown on drawing complete all as specified and directed;- |
153 | Legs with arm rest of 19mm dia MS conduit 1.5mm thick incl one coat of red oxide primer. |
154 | Seat frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer |
155 | Back frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer |
156 | M&L for painting with one coat of white synthetic enameled paint on new/old steel surfaces. |
157 | REPAIR TO TABLE OFFICE CLK/TYPIST STEEL (Drg No FD-84(M)/ 1004) Taking down oldU/S top of table Clk/Typist and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed. |
158 | Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
159 | Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completedall as specified and directed. |
160 | Taking down old U/S long rail table office clk/typist andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
161 | All as per item No 23.03 above but short rails |
162 | All as per item No 23.03 above but stiffener |
163 | All as per item No 23.03 above but legs |
164 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
165 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
166 | REPAIR TO TABLE 3" x 2" STEEL WITHOUT DRAWER STEEL (Drg NoFD-1007) Taking down oldU/S top of table 3" x 2" and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed. |
167 | Taking down old U/S long rail table office 3" x 2" andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
168 | All as per item No 24.01 above but short rails |
169 | All as per item No 24.01 above but stiffener |
170 | All as per item No 24.01 above but legs |
171 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
172 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr -in charge |
173 | REPAIR TO TABLE 3" x 3" STEEL (Drg No FD-1009 ) Taking down oldU/S top of table 3" x 3" and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed. |
174 | Taking down old U/S long rail table office 3" x 3" andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr -in charge |
175 | All as per item No 25.01 above but short rails |
176 | All as per item No 25.01 above but stiffener |
177 | All as per item No 25.01 above but legs |
178 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
179 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr -in charge |
180 | REPAIR TO CHAIR WRITING MAP (Drg No FD/E6/MAP/12) Removal of old U/S tapestry of seat frame and S&F newtapestry of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 150/- |
181 | All as per item No 26 here-in-before but back frame |
182 | Removal od old u/s hand rest of chair writing MAP and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front,complete all as specified and directed by E-in-charge |
183 | Removal of old U/S leg frame and S&F new leg frame of cantilever type MS tubular frame of size 25mm x 10mm complete all as specified and directed by Engr -in charge |
184 | Removal of old U/s foam cushioned from seat & back and S&F new moulded foam cushioned 40mm density as shape and size and fixed over 12mm thick hot pressed plywood with PVC liping all round, complete all as specified and directed by Engr -in charge |
185 | Taking down oldU/S Rubber stopper and S&F new Rubber stopper at the bottom of leg. |
186 | M&L for painting to iron surface of chair writing MAP with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge |
187 | REPAIR TO TABLE 3" x 2" STEEL WITH DRAWER (Drg No FD-1008 ) Taking down oldU/S top of table 3" x 2" and S&F new top of 18mm thick pre-laminated particle board exterior grade one side teak face and other side white balancing including 4mm thick teak wood beading complete all as specified and directed. |
188 | Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
189 | Taking down old U/S long rail table office 3" x 2" andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
190 | All as per item No 27.02 above but short rails |
191 | All as per item No 27.02 above but stiffener |
192 | All as per item No 27.02 above but legs |
193 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
194 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
195 | Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completedall as specified and directed. |
196 | BED HARD STEEL (Drg No FD/E6/MAP/08(R)) Removal of old U/s plywood from bed hard steel and S&F in repairs 12mm thick ply wood top of size 1950mm x 900mm (Single piece)BWR Grade ISI Mark with MS screws, complete all as specified and directed by Engr -in charge |
197 | Removal of old U/s pre-laminated particle board head side from bed hard steel and S&F in repairs 18mm thick pre-laminated particle board head side with MS screws, complete all as specified and directed by Engr -in charge |
198 | Removal of old U/s pre-laminated particle boardfoot side from bed hard steel and S&F in repairs 18mm thick pre-laminated particle boardfoot side with MS screws, complete all as specified and directed by Engr -in charge |
199 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
200 | M&L for painting with two coat of synthetic enamel black paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
201 | FORM WITH OUT BACK (Drg No FD-77(M)) Removal of old U/s plank of form with out back and S&F new plank of form without back of size 1525mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) and all steel / iron surface shall be paintedwith two coats of black enamel paint over two coat of primer complete all as specified and directed by Engr -in charge. |
202 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
203 | FORM WITHBACK (Drg No FD-77(M)) Removal of old U/s plank of form with seat & back and S&F new plank of form with seat and back of size 1525mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts as per drg and all steel / iron surface shall be paintedwith two coats of black enamel paint over two coat of primer complete all as specified and directed by Engr -in charge. |
204 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
205 | REPAIR TO TABLE OFFICE OFFICER STEEL (Drg No FD-1003) Taking down oldU/S top of table office officer steel and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed. |
206 | Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
207 | Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completedall as specified and directed. |
208 | Taking down old U/S long rail table office clk/typist andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
209 | All as per item No 31.03 above but short rails |
210 | All as per item No 31.03 above but stiffener |
211 | All as per item No 31.03 above but legs |
212 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
213 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
214 | REPAIR TO CHAIR COMPUTER (Drg No FD/E6/MAP/ 01) Removal of old U/S tapestry of seat frame and S&F newtapestry of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 150/- |
215 | All as per item No 32 here-in-before but back frame |
216 | Removal of old u/s hand rest of chair computer and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it complete all as specified and directed by Engr -in charge |
217 | Removal of old U/S pedestal assembly and S&F new pedestal assemblycomplete all as specified and directed by Engr -in charge |
218 | Taking down oldU/S twin wheel coasters and S&F newtwin wheel coasters press fitted at the bottom of leg. |
219 | REPAIR TO CHAIR SCHOOL WITH HAND BOARD (Drg No FD/E6/MAP/05) Taking down oldU/S hand board of chair school and S&F new hand board of 18 mm pre-laminated particle board exterior grade with 2mm PVC edging & screwed at right hand side of chair arm fixed to frame complete all as specified and directed. |
220 | Removing of old U/S PVC seat & back and S&F new seat & back in one piece made of PVC fixed with frame complete all as specified and directed. |
221 | Removing of old U/S MS pipe and S&F new MS pipe 25mm leg frame of 18 guage fixed by welding complete all as specified and directed. |
222 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
223 | Removal of old U/s top from chair school with hand board and S&F new top made out of 18 mm thick prelaminated particle board with edging fixed to frame with suitable size of screws complete all as specified and directed by Engr -in charge. |
224 | REPAIR OF TABLE DRESSING LADIES INCL STOOL(MAP) (Drg No FD/MAP-II/07);- Repair of following parts of table dressing ladies incl stool as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- |
225 | Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size. |
226 | Removal old U/S back ply of glass and fixing 6mm thick Commercial plywood of existing shape & size |
227 | Removal of old U/S Pre-laminated particle boardtop of table and fixing new 18mm thick pre-laminated particle board as per existing shape & size. |
228 | Removal of old U/S leg of table and fixing new legs of ist class hard wood (teak) |
229 | Removal of old U/S Drawer with telescopic channel and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board with telescopic channel as per existing shape and size |
230 | Removal of old U/S foam cushioned and S&F new foam cushion of 75mm, 40 density with fabric on seat of 6mm thick ply on stool as per existing shape and size |
231 | Removal of old U/S wheel and S&F new wheel at the bottom of stool as per existing shape and size |
232 | REPAIR TO CHARPOY IP WITH PLYTOP(MAP) (Drg No FD/MAP-II/01):- Removal of old U/s plywood from charpoy IP with plytop and S&F in repairs 12mm thick ply wood top of size 1950mm x 900mm (Single piece)BWR Grade ISI Mark with MS nuts & screws, complete all as specified and directed by Engr -in charge |
233 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
234 | M&L for painting with two coat of synthetic enamel black paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
235 | RE-CANNING OF CHAIRS (Drg No FD-228,229, 279,280,252,244) :- Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed. |
236 | RE-CANNING/RE-WEAVING TO CHAIR VERANDAH (Drg No FD-259 & 256 ) :- Taking out old U/S cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality incl painting with two coat of white synthetic enamel paint and preparing of old steel surfaces. |
237 | Taking out old U/S Nylon newar from chair verandah and re-weaving seat and back with virgin quality of white nylon newar 50 to 55 mm wide incl painting with two coat of white synthetic enamel paint and preparing of old steel surfaces. |
238 | REPAIR TO TABLE COMPUTER(MAP) (Drg No FD/E6/MAP/03) Taking down oldU/S top of table 3" x 2" and S&F new top of 18mm thick pre-laminated particle board exterior grade one side teak face and other side white balancing including 4mm thick teak wood beading complete all as specified and directed. |
239 | Removing of old unserviceable drawer and S&F of new drawer of 18 mm thick pre-laminated particle board ext. grade fixed with telescopic channel complete all as specified and directed. |
240 | Removing of old unserviceable sliding bottom shelf for keyboard and S&F new bottom shelf for keyboardof 18 mm thick pre-laminated particle board ext. grade fixed with telescopic channel complete all as specified and directed. |
241 | Removing of old unserviceable pull out tray above drawer and S&F new pull out tray above drawerof 18 mm thick pre-laminated particle board ext. grade fixed with telescopic channel complete all as specified and directed. |
242 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
243 | M&L for painting with two coat of synthetic enamel black paint over old painted /new surfaces including preparation of old steel surfaces & also polishing with high class french polish on all exposed surfaces(teak wood ) complete all as specified and directed. |
244 | REPAIR TO TABLE DINING 08 PERSON(Drg No FD-273/239/1115/ 376):- S&F in repair of following parts of table dining 08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specifiedand directed. |
245 | Taking down old U/S top of table dining 08pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed. |
246 | Legs |
247 | Long rail |
248 | Short rail |
249 | Stiffener |
250 | M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed. |
251 | REPAIR TO RACK SHOE STEEL(Drg No FD/E6/MAP/02® ) Removing of U/S MS Pipe of 25mm dia for leg frame and S&F new MS Pipe of 25mm dia for leg frame by welding complete all as specified and directed. |
252 | Removing of U/S MS pipe of 19mm dia for jali frame & MS wire of 3mm dia for making jali . S&F new MS pipe of 19mm dia for jali frame & MS wire of 3mm dia for making jali at the bottom by welding complete all as specified and directed. |
253 | M&L for painting with two coat of synthetic enamel black paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
254 | SOFA SET 4/5 SEATER (Drg No FD-281/373 ) S&F of cushion foam for sofa set size 525x525x100mm, 32 density (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specifiedNote:-Rate of tapestry cloth shall not be less than Rs 180/- per RM |
255 | M&L for polishing of sofa set 5 seaterwith high class lekar polish to all exposed surfaces match with existing all as specified and directed. |
256 | Supply and fixing in replacement of top with 18 mm thick block board of size 1900 mm x 685 mm with aluminium sheet 22 guage on top complete all as specified , as directed and as shown on drawing. |
257 | REPAIR OF TABLE BED SIDE(MAP)(Drg No FD/E6/MAP/15 (R)) S&F in repair of the following unsv parts of Table Bed Side MAP of 18 mm thick paticle board ext. grade with pvc beading as per existing shape and size duly planned and wrought finished as shown on drawing complete all as specified and directed; |
258 | Removal of old U/s top from table bed side and S&F new top made out of 18 mm thick prelaminated particle board with edging fixed to frame complete all as specified and directed by Engr -in charge. |
259 | Removal of old U/s side from table bed side and S&F new side made out of 18 mm thick prelaminated particle board with edging fixed to frame with suitable size of screws complete all as specified and directed by Engr -in charge. |
260 | Removal of old U/s back ply from table bed side and S&F new back ply made out of 6 mm thick plywood fixed to frame with suitable size of screws complete all as specified and directed by Engr -in charge. |
261 | Removal of old U/s drawers from table bed side and S&F new drawers made out of 18 mm thick prelaminated particle board with edging complete all as specified and directed by Engr -in charge. |
262 | Removal of old U/s handle from table bed side and S&F new handle of size 100 mm long chromium plated complete all as specified and directed by Engr -in charge. |
263 | Removal of old U/s telescopic channelfrom table bed side and S&F new telescopic channelcomplete all as specified and directed by Engr -in charge. |
264 | M&L for polishing of teak wood (beading) with high class lekar polish to all exposed surfaces match with existing all as specified and directed. |
265 | REPAIR TO TABLE COMPUTER(Drg NoTP(Godrej Interio Star) ) Taking down oldU/S top of table 3" x 2" and S&F new top of 12mm thick light oak/brown engineering wood MDF board complete all as specified and directed. |
266 | Removing of old u/s front side of drawer and S&F of new front side 12mm thick light oak/brown engineering wood MDF board complete all as specified and directed. |
267 | M&L for painting with two coat of synthetic enamel white paint over old painted /new surfaces including preparation of old steel surfaces. |
268 | REPAIR TO BENCH WORKSHOP STEEL (Drg No FD-1024) Taking down oldU/S top of bench workshop steel and S&F new top of 40mm thick 2nd class hard wood with three coats of oil paints complete all as specified and directed. |
269 | Removing of old unserviceable drawer and S&F of new drawer made of 1 mm thich MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
270 | Taking down old U/S long rail of bench workshop steel andS&F new long rail with 32 x 32 mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
271 | All as per item No 44.02 above but short rails |
272 | All as per item No 44.02 above but stiffener |
273 | All as per item No 44.02 above but legs |
274 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
275 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail