Bids Are invited for Reading Table Model - 1800W - Table with 1800 W size shall be 1800 Width mm x 900 Depth mm x 740 Height mm. The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm th-Uttar Pradesh

Bids Are invited for Reading Table Model - 1800W - Table with 1800 W size shall be 1800 Width mm x 900 Depth mm x 740 Height mm. The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top , Reading Table Model - 1665W - Table with 1665 W size shall be 1665 Width mm x 900 Depth mm x 740 Height mm. The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top. , Steel table 1500 x 750 - Steel table with CPU Hanger size shall be 1500 mm Width mm x 750 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edge banding. Understructure Modesty Panel 18 mm thick Pre laminated particle board , Executive Table 1800 with Return unit - Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top soft closing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top , Visitor chair without arm - The SEAT/BACK ASSEMBLY: The seat made from 1.2 ±0.1cm. thick. hot pressed plywood measured as per QA and back should be injection molded from black Co-polymer Polypropylene upholstered with fabric and molded Polyurethane foam together with seat and back covers. , Office Mid Back Chair - The SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with. fabric upholstery covers and molded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. , Office Visitor Chair with Arm - The SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-press

Refer document

Refer document

Refer document