Deposit Work Kalamassery Municipality Providing Ws Arrangements By Replacing The Existing 80Mm Ac Line With 160Mm Pvc At Parijatham Road In Changampuzha Nagar Of Ward No 25 And It Is Useful For Ward Nos 26 And 28 Of Kalamassery Muncipality Deposit Work Ka
Tender Overview
Project Description
Deposit Work Kalamassery Municipality Providing Ws Arrangements By Replacing The Existing 80Mm Ac Line With 160Mm Pvc At Parijatham Road In Changampuzha Nagar Of Ward No 25 And It Is Useful For Ward Nos 26 And 28 Of Kalamassery Muncipality Deposit Work Kalamassery Municipality Providing Ws Arrangements By Replacing The Existing 80Mm Ac Line With 160Mm Pvc At Parijatham Road In Changampuzha Nagar Of Ward No 25 And It Is Useful For Ward Nos 26 And 28 Of Kalamassery Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Working charges |
| 2 | Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road |
| 3 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 5 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil(Ref. Item No. 2.10.1 of DSR) |
| 6 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals.(Data Prepared based on PWD SDB - Item No.1009) |
| 7 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 160 mm nominal outer dia pipes. |
| 8 | Supplying & Fixing 160mm pvc bend - 10 kg 45 degree angle |
| 9 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 80mm. |
| 10 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 150mm |
| 11 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately):80 mm Double acting Air ValveData derived from item no.18.59.2 of DAR |
| 12 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :150 mm diameter. Class II\"Data derived from item no.18.31.3.2of DAR |
| 13 | Engaging Coolie |
| 14 | Interconnecting 300mm CI pipe with 160mm pvc Pipe using 300x300x150mm MS Tee, 150mm CID joint ,300mm CID Joints including Earthwork excavation,cost and conveyance of all materials and labour charge etc complete |
| 15 | Fabricating and supplying (300x150) mm MS Tee using 8mm thick MS plate to suit the OD of existing 300 mm AC pipe including all charges for cutting the plate , chamfering the cut edge ,welding the pipe barrel after bending the plate to the required diameter , bending of the plate using bending machine, welding ,painting including priming coat etc |
| 16 | Interconnection of Existing 80mm AC Pipe with new 160mm Pvc using 160x160 x90 mm PVC Tee, 90mm PVC pipe, 160mm CIR Joint, 80mm CID Joint ,including all material and labour charges etc complete |
| 17 | Interconnection 160mm mm pvc line with existing 50/63mm pvc line using 160x32mm saddle, ,,32mm PVC pipe,32mm bend,50/63 x32mm reducer including earth work excavation ,cost and conveyance of all materials and labour charges etc.complete. |
| 18 | Interconnection in existing 80mm AC with new 160mm pvc using 160x 90 mm reducer , 90mm PVC pipe, 80mm CID joint , including earth work , materials and labour charges etc. complete |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.) |
| 21 | Material cost |
| 22 | 160mm PVC pipe |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender