Military Engineer Services-MES has published Repair Of Solar Water Heaters Of Capacity 500 Lpd 1000 Lpd Solar Street Lights Hi Mast Lights Perimeter Security Lights Street Lights Fittings Repair Of Dg Sets Amf Panels Connected Works At Af Stn Chandinagar Repair Of Solar Water Heaters Of Capa. Submission Date for this Tender is 04-11-2021. Diesel Generators Tenders in AF STATION CHANDINAGAR Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-11-2021 |
| Sl. No. | Item Description |
| 1 | Supply and Fixing including repair/replacement of LED driver 230 volt single phase of 45/60 watt, driver life >= 25000 Hrs efficiency - 85%, with out put short circuit protection all as specified and directed by Engr-in-Charge.Make – halonix /Havell’s/bajaj/polycab Graves. |
| 2 | M&L for LED energy saving and environmental friendly long life versatile pressure diw cast aluminium IP 66 roadway luminaire with high power LEDs and electronic diver complete set of 45 wattage 6000K all as specified and directed by Engr-in-Charge.,Make-Halonix/Bajaj/Polycab as per site requirment |
| 3 | S & F in replacement of hot pressedmoulded SMC boxes with hinged door fixing of size 300 x 200 x105 mm with MS clamp 25 x 3mm made to shape with necessry nuts bolts clamps and washers complete comprising of Aluminium bus bar 63 Amps capacity of suitable size -04 nos mounted over Porcelain insulator with nuts & bolts washers incl MCB SP 6 amps and making incoming and outging connections by taking out loops of cable of any size incl necesary excavations and other civil worksMake :- Sintex /Universal/ SMS complete all as specified and directed by Engineer-in Charge. |
| 4 | M & L for replacement of cable PVC insulated unarmored for connection 1.5 sqmm x 2 core Copper conductor from junction box to street light fittings on poles including PVC flexible pipes complete all as specified and directedby Engineer-in - Charge. |
| 5 | Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out all as specified and directed by Engr-in-Charge. |
| 6 | M&L for sand cushioning with layer of sand 80mm thick before laying of cable & 150mm thick after laying of cable to trenches complete all as specified & directed by Engr-in-Charge. |
| 7 | Supply of brick sub class"B" laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and as directed by the Engineer-in -Charge. |
| 8 | Returning, filling in, including spreading, levelling, watering & well rammimg in layers not exceeding 25 cm complete all as specified and as directed by the Engineer-in -Charge. |
| 9 | Removing of surplus excavated soil to distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr5 above the starting point all as specified and directed by Engr-in-Charge. |
| 10 | Supply & laying cable XLPE insulated, armoured screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sq mm 4 coreincluding connections with proper thimbles from pole to pole junction boxes passing through GI pipe complete all as specified and as directed by the Engineer-in -Charge. |
| 11 | Supply & laying cable XLPE insulated, armoured screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sq mm 4 coreincluding connections with proper thimbles from pole to pole junction boxes passing through GI pipe complete all as specified and as directed by the Engineer-in -Charge. |
| 12 | Taking down UNSV LT Under Ground cable of any size all as specified and directed by Engr-in-Charge. |
| 13 | M&L for LED energy saving and environmental friendly long life versatile pressure diw cast aluminium IP 66 roadway luminaire with high power LEDs and electronic diver complete set of 60 wattage 6000K all as specified and directed by Engr-in-Charge.,Make-Halonix/Bajaj/Polycab as per site requirment |
| 14 | M&L for LED energy saving and environmental friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LEDs and electronic diver complete set of 90 wattage all as specified and directed by Engr-in-Charge.,Make-Halonix/Bajaj/Polycab as per site requirment |
| 15 | M&L for LED energy saving and environmental friendly long life versatile pressure diw cast aluminium IP 66 roadway luminaire with high power LEDs and electronic diver complete set of 120 wattageall as specified and directed by Engr-in-Charge.,Make-Halonix/Bajaj/Polycab as per site requirment |
| 16 | Supply and Fixing including repair/replacement of LED flood light driver 230 volt single phase of 150/200 watt, driver life >= 25000 Hrs efficiency - 85%, with out put short circuit protection all as specified and directed by Engr-in-Charge.Make – halonix /polycab/havells. |
| 17 | Supply and install daily weekly programmable electronic 110-240 VAC crono timer switch incl fixing it on panel & connection to the existing system on sitecomplete all as specified and as directed by Engr-in-Charge. Make L&Tcat no GIC 67DDTO |
| 18 | M&L for auguring of holes in true horizontal position under road by means of mechanical rig after doing ultrasound to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 50 Mtrs long including laying HDPE pipe not less than 150mm dia complete all as specified and directed by Engr-in-Charge. |
| 19 | M & L for scrapping of surface of Steel tubular poles of any size incl clamps . brackets etcwithscrapping grinder and painting of pole with one coat of primer and two coats of Aluminium paint of approved make to the satisfaction of Engr-in-Charge incl writing pole no on yellow background with black paintComplete all as specified and directed by Engineer-in Charge.Make Asian paints/Berger |
| 20 | S&F 400W open constructed ballast, 240V 50Hz for HPSV lamps complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F 400W high pressure sodium vapour tubular clear lamp for HPSV lamps complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F Ignitor for 400W high pressure sodium vapourlamps, 240V 50Hz for HPSV lamps complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for repair of 3 HP power tool motor to operate Steel Wire rope provided fro lowering and lifting of bracket carrying lamps by opening of motor including cutting removing burnt winding wire from stator assy and preparing slots, rewinding the same with super enameled copper winding wire of suitable guage with necessary insulation materials warnishing including replacement of bearings, gears etc and reassemble all the parts with motor testing commissioning complete all as specified and directed by Engr-in-Charge. |
| 24 | Heating element 3 KW with thermostat for electrical Back up complete all as specified and directed by Engineer-in-Charge |
| 25 | Taking down old U/S solar street light any type and capacity all as specified and as directed by Engr-in-Charge. |
| 26 | Supply & fix battery 100 AH, 12V suitable for solar light fitting after taking down the un serviceable battery complete all as specified & directed by Engineer-in-Charge |
| 27 | Supply & fix LED light fittings 12 watt suitable for solar security light after taking down the un serviceable light fittings complete all as specified & directed by Engineer-in-Charge |
| 28 | Supply & fixbattery compartment box made up of MS sheet 2mm thick size suitable for battery with MS cover, locking arrangements & fixing accessories with inside weather proof coated & out side Aluminium paint incl writing pole number in black colour paint etc complete all as specified & directed by Engineer-in-Charge |
| 29 | Taking down old U/S solar water heater of 500/1000 LPD capacity incl dismantling and removal from staging of tankcold water tank and taking downall connections hot and cold water pipe line connections and electric supply connections and removal of all items fromroof topfor carrying out repair and servicing all as specified and as directed by Engr-in-Charge. |
| 30 | Supply and Install SS Water Tank of Capacity 500 Ltrs double wall insulated with PUF Insulation machine injectedinner shell SS 316 and Outer Shell SS 304 Stucco Aluminium alloy coated coloured steel complete on roof tops at aheight of 7 ftincl connection of inlet and outlet water connections complete all as specified and as directed by Engr-in-Charge. Make Neropure /Nectar cat pt no CYL/750/04/SS |
| 31 | M&L for taking down old worn out and u/s GI pipe with aluminum cladding complete of size 20mm and 25mm bore complete all as specified & directed by Engineer-in-Charge. |
| 32 | M&L for hot water pipe duly insulated with glass wool and aluminium cladding20 mm bore complete all as specified and as directed by Engr-in-Charge |
| 33 | M&L for hot water pipe duly insulated with glass wool and aluminium cladding25 mm bore complete all as specified and as directed by Engineer in Charge. |
| 34 | M&L for taking down old u/s gunmetal gate valve of size 20 mm and 25 mm complete for replacemnt all as specified and as directed by Engr-in-Charge. |
| 35 | M&L forreplacement of Gunmetal gate valve with iron wheel head screwed both ends for iron pipe and fixed 25 mm dia complete all as specified & directed by Engineer-in-Charge. |
| 36 | M&L for replacement of Gunmetal gate valve with iron wheel head screwed both ends for iron pipe and fixed 20mm dia complete all as specified & directed by Engineer-in-Charge. |
| 37 | M&L for replacement of unservicable parts of solar water heater complete with servicable partsand making it servicable complete testing and commsioning and brazing of tanks for arrresting leakages all as specified and as directed by Engr-in-Charge. |
| 38 | S&F following items for solar water heater 500 LPD complete all as specified & directed by Engineer-in-Charge. (a)Absorber Plate made of copper sheet, laser or ultrasonically welded to copper tubes with FlangesL-1860 W-1240 H-100, weight 36 kg working pressure 80 KPA . |
| 39 | All as per item No 38 but Aluminum anodized aluminum extrusion casingmade of solid construction in a natural % off white complete all as specified & directed by Engineer-in-Charge. |
| 40 | All as per item No 38 but Single pane 3.2 mm tempered low iron glass collector complete all as specified & directed by Engineer-in-Charge. |
| 41 | All as per item No 38 but 50 mm Insulation resin bonded rock wool & aluminum foil.48 kg/m sq complete all as specified & directed by Engineer-in-Charge. |
| 42 | All as per item No 38 but Back plate collector complete all as specified & directed by Engineer-in-Charge. |
| 43 | All as per item No 38 but Supply & install 500 Ltr Hot water Tank of material SS-304 with Manhole & Stand complete all as specified & directed by Engineer-in-Charge. |
| 44 | All as per item No 38 but Supply & install Makeup Tank for heat exchanger of 5 Liter with ball cock complete all as specified & directed by Engineer-in-Charge. |
| 45 | M & L for Earthing in repairs complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected by GI wire,4.0 mm dia as earth lead by means of nuts and bolt,thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20 mm graded stone aggregate,with fair finish,internal surface of concrete chamber shall be given internal dimension 300 mm x 300 mm x300 mm,15 mm thick plaster in CM 1:4,funnel with wire mesh,80 mm thick RCC pit cover 320 x 320 mm of RCC 1:2:4 Type B1 using 20 mm graded stone aggregate reinforced. XPM jally and charcoal,dust and common salt all as shown in electrical plate No 3 of MES SSR Part -1 (2009) and specified,provision of GI wire upto 7.5 metre long protected by 20 mm dia light grade pipe and watering pipe shall be 15 mm bore light grade ,excavation, earth work,connecting the earthing to an earthing test point or to main switch board as specified and testing on completion complete all as specified and directed by Engr-in-Charge.Note: RCC pit cover shall be precast of RCC (1:2:4) type B1,80 mm thick reinforced with XPM weighting not less than 4 kg/Sqm in lieu of CI cover. |
| 46 | Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement ofworn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed by Engineer-in-Charge. (Note: Parts will be measured separately and paid for under ‘Supplied only’ rates here-in-after) |
| 47 | S&F Heating Element 1500 W complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F Thermostat 45°C to 100°C complete all as specified and directed by Engineer-in-Charge. |
| 49 | S & F Geyser assy ( rupturing plate or U assembly) any make and type for 25 Ltrs capacitywater heater incl replacement of rubber seal nuts and bolts complete all as specified and directed by Engr-in-charge. |
| 50 | S&F Inlet/Outlet PVC connection set complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F Geyser apparatus plate for 25 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 52 | Brazing of steel tank after taking out the steel tank from outer body complete all as specified and directed by Engineer-in-Charge. |
| 53 | Grouting of nuts and bolts for fixing of geyser incl nuts, bolts & washers, cement work complete all as specified and directed by Engineer-in-Charge. |
| 54 | S & F in replacementof indicationlamp (pilot type) for 50 / 25Ltrs water heater complete all as specified and directed by Engr-in-charge. |
| 55 | M&L for carrying out‘B’ check including replacement of Fuel filter, Lube oil filter, Air filter, coolant and Engine oil forDG sets complete all as specified and directed by Engineer-in-Charge of following capacities:- Note: Engine oil will be paid in relevant item (a)DG set of capacity 200 KVA complete all as specified and directed by Engineer-in-Charge. Make Greaves Cotton |
| 56 | (b) DG set of capacity 110 KVA complete all as specified and directed by Engineer-in-Charge. Make Cummins |
| 57 | (c) DG set of capacity 75 KVA complete all as specified and directed by Engineer-in-Charge. Make Kirloskar |
| 58 | (d) DG set of capacity 62.5 KVA complete all as specified and directed by Engineer-in-Charge. Make Kirloskar |
| 59 | (e) DG set of capacity 15 KVA complete all as specified and directed by Engineer-in-Charge. Make Kirloskar |
| 60 | M&L for Replacement of U/S fan belt with new fan belt for DG set of followingcapacity as per manufacturer cat part. (a)DG set of capacity 200 KVA complete all as specified and directed by Engineer-in-Charge. Make Greaves Cotton |
| 61 | (b) DG set of capacity 110 KVA complete all as specified and directed by Engineer-in-Charge. Make Cummins |
| 62 | (c) DG set of capacity 75 KVA complete all as specified and directed by Engineer-in-Charge. Make Kirloskar |
| 63 | (d) DG set of capacity 62.5 KVA complete all as specified and directed by Engineer-in-Charge. Make Kirloskar |
| 64 | (e) DG set of capacity 15 KVA complete all as specified and directed by Engineer-in-Charge. Make Kirloskar |
| 65 | S&F in replacement of solenoid switch suitable including all necessary arrangement for kirloskar CUMMINS Gen set of capacity 15 to 200 KVA complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply only distilled water of best quality in 05 litrs sealed gallon packing complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for repairing of self starter of DG set capacity 15 KVA including transporting upto workshop to carry out necessary replacement of burnt copper winding with new copper winding/ coil of existing gauge from rotor and stator coil, cleaning of slots, dryings varnishing and proper insulating to winding complete all as specified and directed by Engineer-in-Charge. |
| 68 | All as per item No 67 above herein but DG Set of capacity 62.5 KVA complete all as specified and directed by Engineer-in-Charge. |
| 69 | All as per item No 67 above herein but DG Set of capacity 75 KVAand upto 200 KVA complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L for servicing of AMF panel of DG set of capacity upto to 75 KVA cleaning of AMF panel, rectification of defect rewiring replacement of D/S indicator with new indicator of complete AMF panel and replacement of U/S relays under respective item of this schedule complete all as specified and directed by Engineer-in-Charge. |
| 71 | All as per item No 70 above herein but DG Set of capacity above 75 KVAand upto 200 KVA complete all as specified and directed by Engineer-in-Charge. |
| 72 | M&L for Replacement to unserviceable batteries of 12 volts180 AH with new batteries of 12 volts 180 AH maintenance free complete all as specified and directed by Engineer-in-Charge. Make Exide/Amaron Note: Rate for initial charging are included in unit rate |
| 73 | Supply & fix Automatic voltage regulator relay 415V AC complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply & fixElectronic timer 240V AC, adjustment time 6-120Sec complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply & fix reverse power relay, 415V AC complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F PVC insulate copper heavy duty 1 mtr long as battery lead suitable for batteries of capacity 24V 180AH complete all as specified and directed by Engineer-in-Charge. |
| 77 | Removal & repair of stop soleniod DG set connection & testing complete all as specified and directed by Engineer-in-Charge. Make: Kirloskar |
| 78 | S&F in replacement of digital multi function meter to read voltage current and power factor including set of CT-1 each complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F in replacement of indicating lamp RYB complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F in replacement of Auto manual switch complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in replacement of push button switch red with element complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F in replacement of push button switch green with element complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in replacement of 3 pole power contactor LT MNX 140 CONT cat part No. CS94138 complete all as specified and directed by Engineer-in-Charge. Make : L&T. |
| 84 | S&F in replacement of 3 pole power contactor LT MNX 225 CONT cat part No. CS94140 complete all as specified and directed by Engineer-in-Charge. Make : L&T. |
| 85 | Supply and filling in sump/topping up engine oil, multi grade 20w40 in engine or relpacement of engine oil complete all as specified and directed by Engineer-in-Charge. Make :- Indian oil / Hindusthan petrolium / Castrol / Pride /Servo |
| 86 | S&F in repair of Autocut Electrical Battery Charger 12V DC, 5 Amp Unit SMPS with Constant Voltage Output with Battery Charging Transformer and Moulded Type Rectifier Unit etc complete all as specified and directed by Engineer-in-Charge. |
| 87 | All as per item No 87 above but Battary Charger 24V DC, 10 Amp complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F in replacement of Socket type aluminum lugs of 120 Sqmm by disconneting the cables removing the old unserviceble ones and replacing complete all as specified and directed by Engr-in-charge Make : Dowell’s |
| 89 | All as per item No 89 but Socket type aluminum lugs 95 Sqmm complete all as specified and directed by Engineer-in-Charge. Make : Dowell’s |
| 90 | All as per item No 89 but Socket type aluminum lugs 50 Sqmm complete all as specified and directed by Engineer-in-Charge. Make : Dowell’s |
| 91 | All as per item No 89 but Socket type aluminum lugs 70 Sqmm complete all as specified and directed by Engineer-in-Charge. Make : Dowell’s |
| 92 | All as per item No 89 but Socket type aluminum lugs 25 Sqmm complete all as specified and directed by Engineer-in-Charge. Make : Dowell’s |
| 93 | All as per item No 89 but Socket type aluminum lugs 16 Sqmm complete all as specified and directed by Engineer-in-Charge. Make : Dowell’s |
| 94 | All as per item No 89 but Socket type aluminum lugs 35 Sqmm complete all as specified and directed by Engineer-in-Charge. Make : Dowell’s |
| 95 | M&L for carrying out repair of complete DG set by taking each and every parts carefully carrying out necessary repairs in workshop including machining work of parts like of pump nozzle, turbo charger (reconditioning and servicing), head of DG set,cleaning and repairing of radiator, oil pump and refilling of coolant , engine oil as per requirement and guidelines of respective OEMs and replacement of following spares suitable for diesel engine (prime mover) of DG setof capacity 62.5 KVA to 200 KVA including testing complete all as specified and directed by Engineer-in-Charge. |
| 96 | (a) Piston ring |
| 97 | (b) Main Bearing |
| 98 | (c) Piston |
| 99 | (d) Packing Kit |
| 100 | (e) "O" ring |
| 101 | (f) Liner |
| 102 | (g) Exhaust valve |
| 103 | (h) Inlet valve |
| 104 | (j) Head gasket kit |
| 105 | (k) CR Bearing |
| 106 | (l) Diesel filter |
| 107 | (m) Mashroom taper |
| 108 | (n) Diesel pipe complete set |
| 109 | (o) Air filter |
| 110 | (p) Water pump |
| 111 | (q) Fly wheel ring gear |
| 112 | S&F in replacement of Ceramic insulator of standard size for ligthning strip protection fixed in wall of one mtr distance with suitable size screws complete all as specified and directed by Engineer-in-Charge. |
| 113 | S&F in replacement Copper strip 20 x 3.15mm fixed with top of insulator/saddles, fixing with screws , washer etc with help of drill machine for roof conductors and down conductors above ground and and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge. |
| 114 | M&Lfor Providing,PCC 1:3:6 type C-1 using 20 mm graded stone aggreat,for damaged earth pit chamber with fair finish internal surface of concrete chamber of earth complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F in replacement of80 mm thick PCC pit cover 320 mm x 320 mm of PCC 1:2:4 TYPE B-1 using 20 MM graded stone aggregate including necesssary form work and handle for removing the cover from pit with fair finish complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F in replacement for Earthing continuity copper strip of size 20x3mm fixed to wall on battern or recess or chases or buried in gound or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F in replacement for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
