|
| 1 | Item No. (58.18.3)Supply and erection of Octagonal pole of followinglength and dimension as per table-3 with base plate onthe cement concrete foundation of M-15 /M-20 grade(1:1.5:3) with the help of anchor bolts of grade 6.8 (IS1367 P III ). The pole shall be made of S-355JO gradesteel sheet , folded lengthwise to obtained Octagonalshape, having single longitudinal seam weld and hotdipped galvanised internally & externally in accordancewith IS 2629. The pole shall have a weatherproof flushdoor and locking arrangements. The complete workshall be supervised and certified by the manufacturersfor satisfactory supply, erection, testing andcommissioning.9 Mtr. |
| 2 | Item No. (58.19.2)Supply, Erection and Fixing of hot dipped galvanisedOverhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05mm) over the existing poles.Double arm overhang. |
| 3 | Item No.(58.31.1.6)P/ F IP-65/ IP-66 protected street light luminaries onexisting bracket. Fixture made from powder coatedsingle piece pressure die cast aluminum housing withheat dissipation fins on housing with high power LEDs .Diffuser / glass cover for ensuring IP-65 protection forlamp and control gear compartment, system lumenoutput of 100 lum/watt high power LED. Integrateddriver shall be high efficiency having efficiency morethan 85 % and in compliance to IEC standards. Systemlife of 50000 burning hours with 70 % of initial lumensmaintained. Fixture shall be in CE compliance.IP-65 protected LED street light luminariesLED street light fixture 80-90 watt |
| 4 | Item No. (51.1.5.3)Providing & Laying XLPE insulated / P.V.C. sheathedcable of 1.1 KV grade with aluminium conductorArmoured of IS:7098-I/1554-1 approved make inground as per IS:1255 including excavation of30cmx75cm size trench, 25 cm thick under layer ofsand, second Class bricks covering, refilling earth,compaction of earth, making necessary connection,testing etc. as required of size.16.0 Sq.mm4 core |
| 5 | Item No.(51.1.8.4)50.0 Sq.mm, 3.5 core |
| 6 | Item No. (58.15.2)P & F of IP 55 protected light controlled switch based oninfrared sensing and daylight with built in over loadprotection, timer to switch OFF at preselected time.Switch shall have 7 day power backup withouthampering of preset time and over ride facility formaintenance purposeSuitable for 15 kw load (three phase) includingcontactor, MCB, cable glands, terminal block andlocking arrangement |
| 7 | (Item No. (44.1.9)Supplying and drawing FR PVC insulated & unsheathedflexible copper conductor ISI marked (IS:694) of 1.1 kVgrade and approved make in existing surface orrecessed conduit/casing capping including makingconnections etc. as required.3 x 2.5 sq.mm |
| 8 | Item No. (46.1.2.1)P&F 240/415 V MCB of breaking capacity not less than10 KA (B/ C/ D tripping characteristic) ISI marked IS8828(1996)]/ conforming to IEC 60898 in existingboard/sheets including making connections with lugs,testing etc. as required.Double pole MCB6 A to 32 A rating |
| 9 | (Item No. 54.15.1.4)Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coatingWith pipe in pipe technology with 80-100 micron G.I. coatingG.I. pipe 3000 mm long , 80/40 mm , terminal 14 mm G.I. strip. |
| 10 | (Item No. 54.4.1)S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.6 SWG copper Wire |
| 11 | (Item Code 1821)150 mm DN/ID HDPE DWC (External Annular Corrugated and smooth internal walls) SN-8 as per IS 16098 part 2 |
