|
| 1 | CEMENT CONCRETE WORK |
| 2 | 4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 4 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 5 | JOINERY AND PARTITION WORKS |
| 6 | Providing and fixing double action hydraulic floor spring Dorma or equivalent brand and conforming to IS:6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with SS/brass pivot and single piece SS sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge. With stainless steel cover plate minimum 1.25 mm thickness. |
| 7 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 8 | Supply and installation of 3M make frosted film pattern throughout all the internal glass panels wherever required of approx. 1.2 m height as per the approved pattern. - STO room, Supdt room, glass doors etc |
| 9 | Providing and fixing stainless steel TGD handles 32x600 mm as per direction of Engineer-in-Charge. |
| 10 | Providing and fixing 100 mm size patch lock of approved make with Euro cylinder for glazed doors including necessary cutting and making good etc. Complete |
| 11 | Providing and fixing in position frameless fixed glazing using 12mm Thick Clear Toughened Glass fixed Dorma WCP at Top and bottom or SS patch fittings as approved from finished floor level up to height of 2.1 meter. STO room, Supdt room etc. |
| 12 | Providing border around the fixed glass with 12mm thick laminated plywood of approved colour. |
| 13 | Supplying velvet table cloth of approved make and colour. |
| 14 | Supplying 8mm thick tinted clear glass with bevelled edgesfor table top. |
| 15 | Providing wooden door with brass hinges and locking arrangements for the pigeon hole in cash counter using teakwood plank 12mm thick including polishing etc complete |
| 16 | STEEL WORKS |
| 17 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc |
| 18 | Supplying and providing Bird net with weld mesh ( 16 Guage) - size of hole 25 x 25 mm or nearest available size fixed to the structural frame as per the drawings and specification |
| 19 | FINISHING AND FLOORING WORKS |
| 20 | 5.23 : Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand). |
| 21 | 13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 22 | 13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . |
| 23 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 24 | Supply and applying 2 coats of paint over the mangalore tiles using anti fungal paint of approved brand and colour complete. |
| 25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. Size of Tile 600 x 600 mm.(Note - Basic Price of tile- Rs 430/sqm Any savings/reduction in basic price shall be accounted in the bill on pro rata basis ) |
| 26 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,Cover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), Jointing with grey cement slurry @ 3.3 kg/ sqm including keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. Size will be as per requirement. Size of Tile 600x600 mm (Note - Basic Price of tile - Rs 430/sqm Any savings/reduction in basic price shall be accounted in the bill on pro rata basis ) |
| 27 | ROOFING WORKS |
| 28 | 10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes |
| 29 | 12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) |
| 30 | Providing and fixing Hysquare UPVC Rain water gutter with 100 mm depth ,160mm width of approved quality and make wih necessary UPVC Clamp at 1m intervels, UPVC Corners,UPVC Corner Drop,End Cap,Center Joint,SS screws etc complete as per the direction of Engineer in charge. |
| 31 | 12.41.2 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 32 | SIGN BOARD |
| 33 | Supplying, fabricating and installing 16\" x3\" Blue ACP based non lit sign Board with following specifications:Matter : SUB TREASURY VADAKKENCHERY in English and Malayalam with Logo PALAKKAD in MalayalamFrame & Base : 1” 18gauge square pipe frame primed painted and covered with 3mm ACP Base with 100 mm dia GI pipe as support.Letters: 1” Projected Stainless Steel Glossy finish 3D Letters in Sub Treasury Vadakkenchery in English and Malayalam and other matters will be 6mm Black acrylic laser cut letters with Stainless steel laser cut letters on front face. as per approved design and drawing etc. complete as per the direction of Engineer in charge. |
