|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. (a) 1: 3: 6 or richer mix. 14.2.1 (B-14.2.1) |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. (a) 1: 4: 8 or leaner mix. 14.2.1 (B-14.2.1) |
| 3 | Dismantling old plaster or skirting,raking out joins and cleanig the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead(B-14.54) |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. (a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)(B-3.1.6) |
| 5 | Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (B-10.17.1) |
| 6 | Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:(B-9.2) |
| 7 | Providing and fixing 1mm thick M.S. sheet garrage doorshutters with frame of 40x40x6 mm. angle iron 3mm M.S.gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames)Using flat 30x6 mm for diagonal braces and central cross piece.(B-9.17.1) |
| 8 | (B-11.18.2)Kota Stoneslab flooring 25mm thick ,over 20 mm thick base laid and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete with base of C.M. 1:4:For area of each slab up to 2001 to 5000Sq. Cm |
| 9 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand).(B-6/6.1.6) |
| 10 | Cement concrete flooring grade 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate ) rounding off edges etc. but excluding the cost of nosing of steps etc. complete: \"(a) 40 mm thick with 20 mm nominal size aggregate.(B-11.3.1)\" |
| 11 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :(B-10.22) |
| 12 | Supplying and fixing stone lintels/bed plates of approvedquarryroughdressedincement mortar 1:4 :Upto 15 cm. thick.(B-6/6.18.1) |
| 13 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure \"A\":30 mm thick .Commercial Veneer both side (B-8/8.13.2.1) |
| 14 | Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.(B-8/8.14) |
| 15 | Providing and fixing Nigeria / Ghana teak wood grade-I moulding and beadings in doors and windows size 50x12mm (B-8.23.1) |
| 16 | 12.3.2Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20 mm thick |
| 17 | 15.27.4Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100x 75mm |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.(B-12.39.1) |
| 19 | Old work (one or more coats) including scrapping surface andnecessaryrepairs.Colour Change |
| 20 | Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . New Work(B-12.45.1) |
| 21 | 12.45.2Old Work |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work12.48 |
| 23 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete12.23 |
| 24 | Renewing glass panes with putty and nails wherever necessary :4.mm thick float glass panes.13.4.1 |
| 25 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.13.24 |
| 26 | Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :tyle / rail of teak wood 30mm thick/ Aluminium Section4\"wide (B-13.28(a)(i)) |
| 27 | 6\" wide (B-13.28(a)(ii)) |
| 28 | Steel Hinges For Stone Chowkhat ,4\"size (B-13.28(f)(iii)) |
| 29 | (C ) Aldrop of mild Steel (i) 8\" long x10mm dia (B-13/13.28. C (ii)) |
| 30 | (G) Mild Steel Tower Bolt 6\" long (B-13/13.28. G) |
| 31 | (b) Wire Gauge 14 mesh x 24 gauge(B-13/13.28. II) |
| 32 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.(a) 110 mm dia(S-3/3.17.3) |
| 33 | \"P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: \"Size 550 mm x 400 mm (S-1.38.3) |
| 34 | P & FIndian type white glazed vitreous china 1st quality W.C. Orissa pan (I.S. : 2556 Mark ) with 100mm vitreous china P or S trap including cutting and making good the wall and floor size 580x440mm (S-1.2.2) |
| 35 | P & F flush cock/flush valve (IS:9758 Mark) for WC of approved quality make brass/gun metal half-turn wt. 1Kg.of approved quality/make.25mm nominal bore (S-2.14.9) |
| 36 | Providing and Fixing Unplasticized Poly Viny lChloride (UPVC)SWR Pipes Type B for sciland waste discharge system(IS:13592:1992Marked) of approved quality /make 110mm dia (S-3.45.2) |
| 37 | Providing and Fixing Unplasticized PolyVinylChloride (UPVC )SWR Pipes fittings type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality /make (A) offset (S-3.46.20) |
| 38 | (B) Bend87.5 ,110mm (S-3.46.4) |
| 39 | (C ) vent cowel 110 mm(S-3.46.30) |
| 40 | P & F 15mm dia connection pipe of approved quality/make PVC pipe with nuts upto length 600mm (S-2.13.4) |
| 41 | P & F grating of approved quality/make C.P. brass with frame light & superior quality (a) stainless steel sheet size 125mm dia(S-1.50.1) |
| 42 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.(A) 15mm dia nominal bore\"\"B\" Class(S-2.2.1) |
| 43 | (B) 25 mm dia nominal bore B Class(S-2.2.3) |
| 44 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20 mm thick insider plaster in CM 1:6 , finished with floating neat cement , 50 mm thick M-15 grade C.C. flooring earthwork etc. complete as per design incl. dispsal of surplus earth within a lead of 50 mtr. (A) Inside size 300x300 mm depth up to 0.5 M Cement cover with frame. (S-3/3.22.1) |
| 45 | (B) ___Do___inside size 450X450 mm depth up to 0.5m Cement cover with frame. (S- 3/3.22.2) |
| 46 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVCbend as per IS : 7231 .(S-1.22.2) |
| 47 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:(a) 500 litres capacity. + hoisting charges for each floor (S-2.26.3+2.27.1) |
| 48 | (b) 300 litres capacity.(S-2.26.2+2.27.1) |
| 49 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:Brass 400 grm,15mm nominal bore.S-2.7.1 |
| 50 | Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore,15mm, 86 mm long.(-do-) Fancy Type, 122 mm long.S-2.7.9 |
| 51 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete :Brass wt.400 gm,15mm.(S-2.11.1) |
| 52 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) S-2.12.1 |
| 53 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore.S-2.15.1 |
| 54 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25mm nominal bore.(S-2.15.3) |
| 55 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . (A) 2 x 2.5 sq. mm. (E040106) |
| 56 | 2 x 1.5 sq.mm (E040102) |
| 57 | (B) 2 x 4 sq. mm.(E040113) |
| 58 | Providing & Fixing of non modular Switch size flush type 100 watt rotary Minimum 5 step fan regulator as per PWD specification for electrical Works, ISI marked (IS:11037) made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . E072300 |
| 59 | Providing & Fixing of ISI marked (IS:371) 6 amp surface type 3 pin ceiling roses as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws includingmaking connection testing etc. as required. All as per preapproved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR E071300 |
| 60 | Providing & Fixing of ISI marked (IS:1258) 6 amp batten/angle lamp holder as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . E071400 |
| 61 | Providing & Fixing of ISI marked (IS :3854) 6 amp. flush type non modular switch as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, minimum width of switch toggle ( PUSH PART ) should not less then 18 mm, brass terminal & captivescrews including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . E070100 |
| 62 | Providing & Fixing of of 3 pin 6 amp. flush type non modular socket as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . E070300 |
| 63 | Providing & Fixing of ISI marked (IS :3854) 16 amp. flush type non modular switch as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material , minimum width of switch toggle should not less then 18 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . E070200 |
| 64 | Providing & Fixing of 3/6 pin 16 amp flush type non modular socket as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .E070400 |
