Municipal Corporation-MC has published Providing And Installation Of Rain Water Harvester In Government Primary School In Ward No 9 Mc Kundli Providing And Installation Of Rain Water Harvester In Government Primary School In Ward No 9 Mc Kundli. Submission Date for this Tender is 27-10-2021. Water Harvesting Tenders in MC Kundli Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 6.1.8-1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) Details of cost for 1 cum MATERIAL:- (B0017+B0019+CA012+CA008+B0037CA009+B0029+CA015) LABOUR:- (LB032+LB008+LB002+PM001+PM009+LS004) |
| 2 | 33.17.3-Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 3 | 7.21.1-Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in :- Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | 11.5.3-12 mm cement plaster of mix :- 1:4 (1 cement: 4 fine sand) |
| 5 | 6.14.1-1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) Details of cost for 1 cum MATERIAL:- (B0019+B0021+CA008+B0036+CA009+B0029+CA015) LABOUR:- (LB032+LB008+LB002+PM001+PM009+LS004) |
| 6 | 21.93.1-Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge :- Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening |
| 7 | 33.6.1.1-TUBEWELLS :-Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, up to 90 metre depth below ground level. All types of soil300 mm dia |
| 8 | 33.16.3-Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 200 mm dia |
| 9 | 33.15-Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 10 | -3.1.18 Disposal of malba upto 10 km |
| 11 | 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out |
| 12 | 6.34.3-Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars Details of cost for 1 quintal- MATERIAL:- (B0041+CA011+LS004) LABOUR:- (LB003+LB008+LS004) |
| 13 | 13.28-Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 14 | 33.8.1-Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia |
| 15 | 33.9.3-Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
