Repair And Maintenance Of Electrical Installations Repair And Maintenance Of Electrical Installations-1 Installation / Repair / Replacement Of Light Fitting 1.1 Replacing Of Inspection Lamp Bulb And Holder 1000 No 1.2 Replacement Of Tube Light Fittings 250 No 1.3 Replacement Of Switches / Mcbs For Light Fittings 200 No 1.4 Installation And Charging Of New Light Points ( Includes Wiring ( Maximum Of 10Mtr. ) , Providing Switches, Fixing Light Fittings Supports And Light Fitting Etc. ) 50 No 1.5 Replacement Of Street Light Fittings 200 No 1.6 Installation And Charging Of New Street Light Points ( Includes Wiring ( Maximum Of 10Mtr. ) , Providing Switches, Fixing Light Fittings Supports And Light Fitting Etc. ) 50 No 1.7 Repair Of Light Fittings ( Tube Light, Hpmv, Hpsv, Cfl, Led, Mh Etc. ) 100 No 2 Installation / Repair / Replacement Of Fans 2.1 Removal Of Ceiling Fan, Wall Mounting Fans, Pedestal Fans Etc. From Its Location, Checking ( Replace If Required ) Fan Hooks, Rubber Bush, Bolt& Nut Etc. Cleaning And Refitting To Its Location 250 No 2.2 Repair Of Ceiling Fan, Wall Mounting Fans, Pedestal Fans 50 No 2.3 Replacement Of Ceiling Fan, Wall Mounting Fans, Pedestal Fans 100 No 2.4 Installation And Charging Of New Ceiling Fan / Wall Mounting Fans / Pedestal Fans Etc. ( Includes Wiring ( Maximum Of 10Mtr. ) , Providing Switches Etc. ) 25 No 2.5 Repair Of Exhaust Fans Of Different Capacity. 100 No 2.6 Replacement Of Exhaust Fans Of Different Capacity 100 No 2.7 Installation And Charging Of New Exhaust Fans Of Different Capacity ( Includes Wiring ( Maximum Of 10Mtr. ) , Providing Switches Etc. ) 50 No 2.8 Repair Of Tube Axial Fans / Air Circulator / Man Cooler Etc. 30 No 2.9 Replacement Of Air Circulator Man Cooler Etc. 20 No 2.10 Installation And Charging Of New Air Circulator Man Cooler ( Includes Wiring ( Maximum Of 10Mtr. ) , Providing Switches Etc. ) 10 No 3 Air Blowing, Cleaning And Servicing Of Pcc / Mcc Panels. While Cleaning Any Of The Damaged Component Noticed, Shall Be Replaced By Contractor ( All Required Spares Shall Be Issued By Irel ) . The Work Includes Cleaning Of The Panels, Checking The Healthiness Of Panel Feeders, Switch Gears, Terminals, Repair / Replacement Of The Same In Case Damaged Condition. 180 No 4 Air Blowing, Cleaning And Servicing Of Main Switches, Starters, Dbs‟ While Cleaning Any Of The Damaged Component Noticed, Shall Be Replaced By Contractor ( All Required Spares Shall Be Issued By Irel ) . The Work Includes Cleaning, Checking The Healthiness Of Feeders, Switch Gears, Terminals, Repair / Replacement Of The Same In Case Damaged Condition. 150 No 5 Repair / Replacement Of Dol Starter 5.1 Replacement Of Contactors 300 No 5.2 Replacement Of Over Load Relay 100 No 5.3 Replacement Of Dol Starter 100 No 5.4 Repair Of Dol Starter 50 No 5.5 Installation And Charging Of Dol Starter 50 No 6 Repair / Replacement Of Star-Delta Starter 6.1 Replacement Of Contactors 300 No Page 18 Of 36 6.2 Replacement Of Over Load Relay 100 No 6.3 Replacement Of Star Delta Timer 50 No 6.4 Replacement Of Star Delta Starter 30 No 6.5 Repair Of Star Delta Starter 100 No 6.6 Installation And Charging Of Star Delta Starter 30 No 7 Repair / Replacement Of Remote Switch Station 150 No 8 Installation And Charging Of Remote Switch Station 50 No 9 Repair / Replacement Of Float Switch Control Station 100 No 10 Replacement Of Float Switch 100 No 11 Installation And Charging Of Float Switch Control Station & Float Switch ( Including Its Cabling ) 30 No 12 Repair / Replacement Of Drives And Its Programming 30 No 13 Repair / Replacement Of Lighting Dbs 50 No 14 Installation And Charging Of New Lighting Db ( Includes Cabling, Termination, Earthing Etc. 10 No 15 Repair / Replacement Of Power Dbs‟ 20 No 16 Installation And Charging Of New Power Db ( Includes Cabling, Termination, Earthing Etc. 10 No 17 Installation / Replacement / Repair Of Sfu 17.1 32A To 160A 300 No 17.2 200A To 400A 100 No 18 Replacement Of Hrc Fuses. 300 No 19 Removal Fuse / Isolation Of Power From Electro-Mechanical Machinery For Maintenance Work 200 No 20 Re-Positioning Fuse To Circuit / Charging The Isolated Power From The Electromechanical Machinery After Maintenance Work. 200 No 21 Installation / Replacement / Repair Of Mcb / Mpcb 300 No 22 Installation / Replacement / Repair Of Mccb 22.1 32A To 160A 100 No 22.2 200A To 400A 50 No 22.3 630A And Above 10 No 23 Checking The Serviceability Condition Of Motor. ( Includes Checking The Connector Condition / Tightness Of Connection, Earthing Of The Motor ( Megering If Required ) , Checking The Condition Of Coupling And Spider Of The Motor, Checking The Condition Of The Cooling Fan And Fan Cover Etc. ) . 23.1 0.5 Hp To 7.5Hp 300 No 23.2 10Hp To 30Hp 100 No 23.3 40Hp To 50Hp 20 No 24 Replacement Of Bearings, Lubricating & Over Hauling Of A.C Induction Motors. 24.1 0.5 Hp To 7.5Hp 300 No 24.2 10Hp To 30Hp 100 No 24.3 40Hp To 50Hp 20 No 25 Replacement Of Terminal Connector And Connector Box Of A.C Induction Motors. 25.1 0.5 Hp To 7.5Hp 300 No 25.2 10Hp To 30Hp 100 No 25.3 40Hp To 50Hp 20 No 26 Replacement Of Cooling Fan And Fan Cover Of A.C Induction Motors. 26.1 0.5 Hp To 7.5Hp 300 No 26.2 10Hp To 30Hp 100 No 26.3 40Hp To 50Hp 20 No 27 Replacement Of Damaged Motors. 27.1 0.5 Hp To 7.5Hp 300 No Page 19 Of 36 Evaluation Basis For Tender: 1 Evaluation Of The Technically Qualified Offers As Per Pre-Qualification Criteria And Shall Be Done Based On The Total Landed Price At Irel, Red. 2 Parties Who Have Defaulted In Execution Of Contracts In Previous Instances At Irel, Red, Shall Not Be Considered 3 Msme And Startup Enterprises Shall Be Allowed Relaxation On Prior Experience And Turnover As Per Policy Circular 1 ( 2 ) ( 1 ) 2016-Ma Dated:10Th March 2016. Provided They Can Prove That They Are Technically Capable To Deliver As Per Quality Specification. 27.2 10Hp To 30Hp 100 No 27.3 40Hp To 50Hp 20 No 28 Checking The Conditions Of Heating Coils & Switch Gears For The Furnace / Calciner 30 No 29 Cleaning, Lubricating, And Checking Of Hooks, Clamps, Nuts& Bolts, Wire Rope, Chain And Replacement ( If Required ) Of Electric Hoist 30 No 30 Repair The Control Circuit Of The Electric Hoist 30 No 31 Additional Charges For Attending Back Shift Breakdown Work Attending On Emergency Call Basis Per Team Of Supervisor And Electrician ( This Will Be In Addition To The Respective Charges For The Work Carried Out. )
