|
| 1 | ALMIRAH MEDIUM STEEL (DRG.NO. PMA(K)/GP1/Steel/02) |
| 2 | Supply and fix 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/welding to shutter of almirah including taking down of old lock. |
| 3 | Supply and fix MS handle chromium plated with necessary fittings of approved quality as shown on drg including taking down of old handles. |
| 4 | Supply and fix new locking device as per drg including taking down of unserviceable locking device. |
| 5 | Supply and fix shelves made out 1 mmthick MS sheet as existing including taking down of old shelves and fixing with cleats, nuts and bolts including two coats of synthetic enamel paint over a coat of primer. |
| 6 | Removing dented/bend door shutter of Almirah steel Med and bringing the item to the original shape and re-fixing repaired door shutters with suitable new hinges. |
| 7 | Supply and fix leg made out of 1 mm MS sheet as existing including taking down of old leg. |
| 8 | Preparing the old painted steel surfaces by sand papering and applying red oxide primer & painting with two coats synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 9 | ALMIRAH LARGE STEEL (DRG.NO.PMA(K)/GP1/STEEL/03 and FD-1031) |
| 10 | Supply and fix 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/welding to shutter of almirah including taking down of old lock. |
| 11 | Supply and fix MS handle chromium plated with necessary fittings of approved quality Godrej pattern as shown on drg including taking down of old handle. |
| 12 | Supply and fix new locking device as per drg including taking down of unserviceable locking device. |
| 13 | Supply and fix shelves made out of 19 guage thick MS sheet to shape and size as shown on drawing and fixing with cleats, nuts and bolts including two coats of synthetic enamel paint over a coat of primer. |
| 14 | Removing dented/bend door shutter of Almirah steel large/almirah large galzed and bringing the item to the original shape and re-fixing repaired door shutters with suitable new hinges. |
| 15 | S&F leg made out of 1 mm thick guage MS sheet as existing size and shape including taking down of old leg. |
| 16 | Preparing the old painted steel surfaces by sand papering and applying red oxide primer & painting with two coats synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 17 | BED HARD STEEL (DRG.NO.PMA(K)/GP-1/ STEEL/04) |
| 18 | Removing existing worn out plywood top from bed hard steel, S&F12mm thick new plywood BWR Grade ( ISI marked ) fixed with S/S screw and cup washers as shown in drg. |
| 19 | Removing unserviceable prelaminated particle board from head board of bed hard, S&F new prelaminated particle board 18mm thick as existing in head board size of 664mmx200mm. |
| 20 | Removing unserviceable prelaminated particle board from leg board of bed hard, S&F new prelaminated particle board 12mm thick as existing in leg board size of 664mmx300mm. |
| 21 | Preparing the old painted portion of bed hard steel surface by sand paper and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 22 | CHAIR VERANDAH (DRG.NO.PMA(K)/GP-1/ STEEL/17) |
| 23 | Preparing the old painted steel surfaces by sand papering, removing dents and bents and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 24 | S&F new hard rubber shoe superior quality all as specified and directed by Engr-in-Charge. |
| 25 | CHAIR CBA STAFF (DRG.NO.PMA(K) GP1/STEEL/10) |
| 26 | Removing unserviceable tapestry cloth and PU foam from the seat, supply and fix new PU foam and new tapestry cloth of superior quality as approved of size 420x420mm costing not less than Rs 220/- per mtr. |
| 27 | Removing unserviceable tapestry cloth and PU foam from the back, supply and fix new PU foam and new tapestry cloth of superior quality as approved of size 420x270mm costing not less than Rs 220/- per mtr. |
| 28 | Preparing old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth with two coats of synthetic enamel paint (Colour black) to given glossy finish. |
| 29 | S&F hard rubber shoe of superior quality to bottom portion of legs. |
| 30 | CHAIR EXECUTIVE (DRG.NO.PMA(K)/GP1/Steel/12) |
| 31 | Removing exisitng unserviceable fabric and PU foam from seat and back, S&F new PU foam and new fabric upholstery to moulded PU form of superior quality as approved by Engineer-in-charge costing not less than Rs 220/- per mtr. |
| 32 | Removal of twin wheel casters and supply and fix twin wheel casters injection moulded. |
| 33 | Removing existing broken pedestal assembly and S&F new steel base all types revolving chair. |
| 34 | Removing existing broken padded arm rest of revolving chair computer chair and S&F new Arm rest (Black integral) skin polyurethane inforced with MS insert it shall be scratch and weather resistant as per sample. |
| 35 | CHAIR COMPUTER (DRG.NO.PMA(K) GP1/STEEL/11) |
| 36 | Removing exisitng unserviceable tapestry cloth and PU foam from seat and back, S&F new PU foam and new tapestry of superior quality as approved by GE costing not less than Rs 220/- per mtr. |
| 37 | Removal of twin wheel casters and supply and fix twin wheel casters. |
| 38 | Removing existing UNSV gas lift (up/down) and fixing the same gas lift to match with the existing gas pressure of 300 N force , should under go an impact test from revoling chair , computer chair supply and fix new bottom gas lift (Hydraulic). |
| 39 | Removing existing broken pedestal assembly and S&F new steel base all types revoling chair. |
| 40 | Removing existing broken padded arm rest for computer chair and S&F new arm rest (black integral) skin polyurethene . It shall be scratch and weather resistant. |
| 41 | CHAIR CB STEEL (DRG.NO.PMA (K)/GP1/ STEEL/ 09) |
| 42 | Removing unserviceable tapestry cloth and PU foam from the seat, supply and fix new PU foam and new tapestry cloth of superior quality of size 420x420mm costing not less than Rs 220/- per mtr. |
| 43 | Removing the unserviceable tapestry cloth and PU foam from the back, supply and fix new PU foam and new tapestry cloth of superior quality of size 420x270mm costing not less than Rs 220/- per mtr. Rest all as per existing. |
| 44 | Preparing of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 45 | S&F hard rubber shoes of superior quality bushes to bottom portion of legs. |
| 46 | CABINET FILING LARGE 4 DRAWER (DRG.NO.PMA (K)/ GP-1/Steel/06) |
| 47 | Preparing the old painted portion of cabinet filling 4 drawer (Size 470x620x1320 mm) surface by sand paper removing dents and bents filling with steel putty and appling red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 48 | LOCKER FOR STAFF (6 PERSON) (DRG.NO.PMA(K) /Gp5/ Steel/02) |
| 49 | Preparing the old painted portion of Locker for staff 6 person (Size 450x450x1800 mm) surface by sand paper removing dents and bents filling with steel putty and appling red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 50 | RACK OPEN STEEL (DRG.NO.PMA(K)GP-1/STEEL/23) |
| 51 | Prepairing of old painted steel surfaces of Rack Open Steel (Size 915x458x1829 mm) by sand papering, removing dents and bents filling with steel putty and applying synthetic enamel paint smoke grey / existing of Rack, colour to give glossy finish all as directed by the Engr-in-Charge. |
| 52 | RACK SHOE STEEL (DRG.NO.PMA(K)GP-1/STEEL/22) |
| 53 | Preparing of old Steel Surfacs of inside and outside ofRack shoe steel(Size 735x310x880 mm) open type with 05 Shelves by scraping with emery paper ,cleaning ,removing dirt and bends making surfaces smooth and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 54 | SIDE RACK 3 SPACE TRAY STEEL (DRG.NO. PMA(K)/GPI/ STEEL/24) |
| 55 | Prepairingof old painted steel surfaces by sand papering, removing dents and bents filling with steel putty and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 56 | TABLE OFFICE CLERK STEEL (DRG.NO.FD-1004 and PMA(K)/ GP-1/STEEL/33) |
| 57 | Removing the unserviceable table top and supply and fix new table top of size 1200x590mm made out of prelaminated particle board of 18mm thick existing shade one side of decorative veneer and other side off white including 4mm thick teak wood edging duly french polished all around as shown on drawing. |
| 58 | Prepairing of old painted steel surfaces by sand papering, removing dents and bents filling with steel putty and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 59 | Supply and fix steel lock 6 lever of approved quality with duplicate keys including taking down of old lock. |
| 60 | VISITOR CHAIR (DRG.NO.PMA (K)/GP-1/Stee/05) |
| 61 | Removing unserviceable tapestry cloth affixed to PU foam from the seat, supply and fix as approved new tapestry cloth of superior quality of size as per drawing, costing not less than Rs 220/- per metre. |
| 62 | Removing unserviceable tapestry cloth affixed to PU foam, from the back and supply and fix as approved tapestry cloth of superior quality of size as per drawing costing not less than Rs 220/- per metre. |
| 63 | Preparing old steel surfaces by scraping with emery paper, cleaning, re-dusting, making surfaces smooth and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 64 | STUDY CHAIR& CHAIR WRITING STEEL (DRG.NO.FD/E6/MAP /12, PMA(K)/GP-1/Steel/20 and TP) |
| 65 | Removing unserviceable tapestry cloth and PU foam from the seat, supply and fix new PU foam and new tapestry cloth of superior quality of size as per drawing, costing not less than Rs 220/- per metre. |
| 66 | Removing unserviceable tapestry cloth and PU foam from the back and supply and fix new PU foam and new tapestry cloth of superior quality of size as per drawing costing not less than Rs 220/- per metre. |
| 67 | Preparing old steel surfaces by scraping with emery paper, cleaning, re-dusting, making surfaces smooth and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 68 | TWO TIER BUNK BED (DRG.NO -TP) |
| 69 | Removing the hard rubber shoe for bunk bed top portion of legs and supply and fix new hard rubber shoe as per existing shade and shape. |
| 70 | Removing the hard rubber shoe for bunk bed bottom portion of legs and supply and fix new hard rubber shoe pad as per existing shade and shape. |
| 71 | Preparing old steel surfaces by scraping with emery paper, cleaning, re-dusting, making surfaces smooth and applying putty wherever required and applying red oxide with two coats of synthetic enamel paint to give glossy finish. |
| 72 | WARDROBE CUPBOARD (DRG.NO-TP) |
| 73 | Removing unserviceable sliding channel of drawer and S&F new sliding channel as per existing. |
| 74 | Removing unserviceable hanging rod and S&F new hanging rod with end cap of existing shade and shape. |
| 75 | Supply and fix steel lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/welding to shutter of wardrobe cupboard including taking down of old lock. |
| 76 | Preparing the old painted steel surfaces by sand papering and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 77 | STUDY TABLE (MAKE - GODREJ)(DRG.NO.- TP) |
| 78 | Removing existing unserviceable table top and S&F new table top of size 1200 mm X600 mm made out of 18 mm thick Plywood BWR grade with 1mm thick sunmica lamination inculing 4 mm thick teakwood beading and also applying french polish to the beading. |
| 79 | Removing unserviceable sliding PVC moulded key board and S&F new PVC moulded key board of shade & shape as existing (Size 550 X 260 mm) with pencil & eraser case along with sliding channel. |
| 80 | Supply and fix steel lock with duplicate key (2 Nos of key) of approved quality of existing size suitable locking arrangment shall be provided to each table fixed with screw to drawer of Study table including taking down of old lock. |
| 81 | Removing the unserviceable stud of leg and supply and fix new stud of leg of existing shade and shape. |
| 82 | Removing unserviceable drawer handle and S&F new drawer handle of existing shade. |
| 83 | Preparing the old painted steel surfaces by sand papering and applying red oxide primer & painting with two coats of synthetic enamel paint to give glossy finish all as directed by the Engineer-in-charge. |
| 84 | Note:- The quoted rate for the work includes for removing the furniture items from the existing accn/ office and shifting the same to the directed / specified area for the repairs. |
